Bricolage Grotesque: Version 1.001;gftools[0.9.32] added

[emmamarichal]

c20ca32: [gftools-packager] Bricolage Grotesque: Version 1.001;gftools[0.9.32] added

• Bricolage Grotesque Version 1.001;gftools[0.9.32] taken from the upstream repo https://github.com/ateliertriay/bricolage at commit ateliertriay/bricolage@c3739c1.

[github-actions]

Fontbakery report

Fontbakery version: 0.8.13

[1] Family checks

ℹ INFO: Check axis ordering on the STAT table. (com.google.fonts/check/STAT/axis_order)

• ℹ INFO From a total of 1 font files, 0 of them (0.00%) lack a STAT table.

  And these are the most common STAT axis orderings:
  ('opsz-wdth-wght', 1) [code: summary]

[19] BricolageGrotesque[opsz,wdth,wght].ttf

🔥 FAIL: METADATA.pb font.name field contains font name in right format? (com.google.fonts/check/metadata/valid_name_values)

• 🔥 FAIL METADATA.pb font.name field ("Bricolage Grotesque") does not match correct font name format ("Bricolage Grotesque 96pt Condensed ExtraBold"). [code: mismatch]

⚠ WARN: Check for codepoints not covered by METADATA subsets. (com.google.fonts/check/metadata/unreachable_subsetting)

• ⚠ WARN The following codepoints supported by the font are not covered by
  any subsets defined in the font's metadata file, and will never
  be served. You can solve this by either manually adding additional
  subset declarations to METADATA.pb, or by editing the glyphset
  definitions.

• U+02C7 CARON: try adding one of: tifinagh, canadian-aboriginal, yi

• U+02D8 BREVE: try adding one of: yi, canadian-aboriginal

• U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal

• U+02DB OGONEK: try adding one of: yi, canadian-aboriginal

• U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: coptic, math, tifinagh, cherokee

• U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic

• U+0307 COMBINING DOT ABOVE: try adding one of: coptic, tifinagh, math, tai-le, malayalam, old-permic, syriac, canadian-aboriginal

• U+030A COMBINING RING ABOVE: try adding syriac

• U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee

• U+030C COMBINING CARON: try adding one of: tai-le, cherokee
  22 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext, latin, latin-ext, menu, vietnamese [code: unreachable-subsetting]

⚠ WARN: Check variable font instances (com.google.fonts/check/fvar_instances)

• ⚠ WARN fvar instance coordinates for non-wght axes are not the same as the fvar defaults. This may be intentional so please check with the font author:

Name	current	expected
ExtraLight	opsz=14.0, wght=200.0, wdth=100.0	opsz=96.0, wght=200.0, wdth=75.0
Light	opsz=14.0, wght=300.0, wdth=100.0	opsz=96.0, wght=300.0, wdth=75.0
Regular	opsz=14.0, wght=400.0, wdth=100.0	opsz=96.0, wght=400.0, wdth=75.0
Medium	opsz=14.0, wght=500.0, wdth=100.0	opsz=96.0, wght=500.0, wdth=75.0
SemiBold	opsz=14.0, wght=600.0, wdth=100.0	opsz=96.0, wght=600.0, wdth=75.0
Bold	opsz=14.0, wght=700.0, wdth=100.0	opsz=96.0, wght=700.0, wdth=75.0
ExtraBold	opsz=14.0, wght=800.0, wdth=100.0	opsz=96.0, wght=800.0, wdth=75.0

⚠ WARN: Combined length of family and style must not exceed 27 characters. (com.google.fonts/check/name/family_and_style_max_length)

• ⚠ WARN The combined length of family and style exceeds 27 chars in the following 'WINDOWS' entries:
  FONT_FAMILY_NAME = 'Bricolage Grotesque 96pt Condensed ExtraBold' / SUBFAMILY_NAME = 'Regular'

Please take a look at the conversation at fonttools/fontbakery#2179 in order to understand the reasoning behind these name table records max-length criteria. [code: too-long]

⚠ WARN: A static fonts directory with at least two fonts must accompany variable fonts (com.google.fonts/check/repo/vf_has_static_fonts)

• ⚠ WARN Please consider adding a subdirectory called "static/" and including in it static font files. [code: missing]

⚠ WARN: Ensure variable fonts include an avar table. (com.google.fonts/check/mandatory_avar_table)

• ⚠ WARN This variable font does not have an avar table. [code: missing-avar]

⚠ WARN: Ensure fonts have ScriptLangTags declared on the 'meta' table. (com.google.fonts/check/meta/script_lang_tags)

• ⚠ WARN This font file does not have a 'meta' table. [code: lacks-meta-table]

⚠ WARN: Ensure dotted circle glyph is present and can attach marks. (com.google.fonts/check/dotted_circle)

• ⚠ WARN No dotted circle glyph present [code: missing-dotted-circle]

⚠ WARN: Ensure soft_dotted characters lose their dot when combined with marks that replace the dot. (com.google.fonts/check/soft_dotted)

• ⚠ WARN The dot of soft dotted characters should disappear in other cases, for example: ĭ̦ i̦̇ i̦̊ i̦̋ ǐ̦ i̦̒ j̦̀ j̦́ ĵ̦ j̦̃ j̦̄ j̦̆ j̦̇ j̦̈ j̦̉ j̦̊ j̦̋ ǰ̦ j̦̒ į̦̀ [code: soft-dotted]

⚠ WARN: Are there any misaligned on-curve points? (com.google.fonts/check/outline_alignment_miss)

• ⚠ WARN The following glyphs have on-curve points which have potentially incorrect y coordinates:

  • three (U+0033): X=106.5,Y=0.5 (should be at baseline 0?)

  • four (U+0034): X=144.0,Y=661.0 (should be at cap-height 660?)

  • four (U+0034): X=387.0,Y=661.0 (should be at cap-height 660?)

  • nine (U+0039): X=117.5,Y=1.5 (should be at baseline 0?)

  • question (U+003F): X=209.5,Y=662.0 (should be at cap-height 660?)

  • Q (U+0051): X=25.0,Y=-2.0 (should be at baseline 0?)

  • Q (U+0051): X=141.5,Y=1.5 (should be at baseline 0?)

  • a (U+0061): X=121.0,Y=526.0 (should be at x-height 528?)

  • g (U+0067): X=234.0,Y=-0.5 (should be at baseline 0?)

  • m (U+006D): X=540.0,Y=527.0 (should be at x-height 528?)

  • 46 more.

Use -F or --full-lists to disable shortening of long lists. [code: found-misalignments]

ℹ INFO: Does DESCRIPTION file contain a upstream Git repo URL? (com.google.fonts/check/description/git_url)

• ℹ INFO Found a git repo URL: https://github.com/ateliertriay/bricolage [code: url-found]

ℹ INFO: Show hinting filesize impact. (com.google.fonts/check/hinting_impact)

• ℹ INFO Hinting filesize impact:

	ofl/bricolagegrotesque/BricolageGrotesque[opsz,wdth,wght].ttf
Dehinted Size	399.7kb
Hinted Size	399.8kb
Increase	24 bytes
Change	0.0 %
[code: size-impact]

ℹ INFO: Font has old ttfautohint applied? (com.google.fonts/check/old_ttfautohint)

• ℹ INFO Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.001;gftools[0.9.32]'] [code: version-not-detected]

ℹ INFO: EPAR table present in font? (com.google.fonts/check/epar)

• ℹ INFO EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818 [code: lacks-EPAR]

ℹ INFO: Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering? (com.google.fonts/check/gasp)

• ℹ INFO These are the ppm ranges declared on the gasp table:

PPM <= 65535:
flag = 0x0F
- Use grid-fitting
- Use grayscale rendering
- Use gridfitting with ClearType symmetric smoothing
- Use smoothing along multiple axes with ClearType®
[code: ranges]

ℹ INFO: Check for font-v versioning. (com.google.fonts/check/fontv)

• ℹ INFO Version string is: "Version 1.001;gftools[0.9.32]"
  The version string must ideally include a git commit hash and either a "dev" or a "release" suffix such as in the example below:
  "Version 1.3; git-0d08353-release" [code: bad-format]

ℹ INFO: Font contains all required tables? (com.google.fonts/check/required_tables)

• ℹ INFO This font contains the following optional tables:

  • loca

  • prep

  • GPOS

  • GSUB

  • gasp [code: optional-tables]

ℹ INFO: List all superfamily filepaths (com.google.fonts/check/superfamily/list)

• ℹ INFO ofl/bricolagegrotesque [code: family-path]

ℹ INFO: Font follows the family naming recommendations? (com.google.fonts/check/family_naming_recommendations)

• ℹ INFO Font does not follow some family naming recommendations:

Field	Value	Recommendation
Family Name	Bricolage Grotesque 96pt Condensed ExtraBold	exceeds max length (31)
[code: bad-entries]

Summary

💔 ERROR	🔥 FAIL	⚠ WARN	💤 SKIP	ℹ INFO	🍞 PASS	🔎 DEBUG
0	1	9	43	10	183	0
0%	0%	4%	17%	4%	74%	0%

Note: The following loglevels were omitted in this report:

• SKIP
• PASS
• DEBUG

[RosaWagner]

@emmamarichal The font name is a bit long: Bricolage Grotesque 96pt Condensed ExtraBold. 12pt ExtraLight could be a better fit within the available origins, no?

[emmamarichal]

@RosaWagner Ah yes indeed, I'll update it, thanks!
@chrissimpkins if Mathieu merge my new PR quickly, this one can be merge before the weekend! I'll update the metadata too

[emmamarichal]

Updated

Bricolage Grotesque: Version 1.001;gftools[0.9.33.dev8+g029e19f] added

---

b9f6c71: [gftools-packager] Bricolage Grotesque: Version 1.001;gftools[0.9.33.dev8+g029e19f] added

• Bricolage Grotesque Version 1.001;gftools[0.9.33.dev8+g029e19f] taken from the upstream repo https://github.com/ateliertriay/bricolage at commit ateliertriay/bricolage@84745e5.

7b61b05: Added minisite url in metadata

c300561: corrected metadata

bb42ec1: corrected metadata

[emmamarichal]

@RosaWagner @chrissimpkins, font origin updated (to make the name shorter), and metadata also!

[github-actions]

Fontbakery report

Fontbakery version: 0.8.13

[1] Family checks

ℹ INFO: Check axis ordering on the STAT table. (com.google.fonts/check/STAT/axis_order)

• ℹ INFO From a total of 1 font files, 0 of them (0.00%) lack a STAT table.

  And these are the most common STAT axis orderings:
  ('opsz-wdth-wght', 1) [code: summary]

[18] BricolageGrotesque[opsz,wdth,wght].ttf

🔥 FAIL: METADATA.pb font.name field contains font name in right format? (com.google.fonts/check/metadata/valid_name_values)

• 🔥 FAIL METADATA.pb font.name field ("Bricolage Grotesque") does not match correct font name format ("Bricolage Grotesque 96pt ExtraBold"). [code: mismatch]

⚠ WARN: Check for codepoints not covered by METADATA subsets. (com.google.fonts/check/metadata/unreachable_subsetting)

• ⚠ WARN The following codepoints supported by the font are not covered by
  any subsets defined in the font's metadata file, and will never
  be served. You can solve this by either manually adding additional
  subset declarations to METADATA.pb, or by editing the glyphset
  definitions.

• U+02C7 CARON: try adding one of: canadian-aboriginal, yi, tifinagh

• U+02D8 BREVE: try adding one of: canadian-aboriginal, yi

• U+02D9 DOT ABOVE: try adding one of: canadian-aboriginal, yi

• U+02DB OGONEK: try adding one of: canadian-aboriginal, yi

• U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: math, cherokee, tifinagh, coptic

• U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh

• U+0307 COMBINING DOT ABOVE: try adding one of: canadian-aboriginal, old-permic, syriac, tai-le, tifinagh, math, malayalam, coptic

• U+030A COMBINING RING ABOVE: try adding syriac

• U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee

• U+030C COMBINING CARON: try adding one of: tai-le, cherokee
  22 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext, latin, latin-ext, menu, vietnamese [code: unreachable-subsetting]

⚠ WARN: Check variable font instances (com.google.fonts/check/fvar_instances)

• ⚠ WARN fvar instance coordinates for non-wght axes are not the same as the fvar defaults. This may be intentional so please check with the font author:

Name	current	expected
ExtraLight	opsz=14.0, wght=200.0, wdth=100.0	opsz=96.0, wght=200.0, wdth=100.0
Light	opsz=14.0, wght=300.0, wdth=100.0	opsz=96.0, wght=300.0, wdth=100.0
Regular	opsz=14.0, wght=400.0, wdth=100.0	opsz=96.0, wght=400.0, wdth=100.0
Medium	opsz=14.0, wght=500.0, wdth=100.0	opsz=96.0, wght=500.0, wdth=100.0
SemiBold	opsz=14.0, wght=600.0, wdth=100.0	opsz=96.0, wght=600.0, wdth=100.0
Bold	opsz=14.0, wght=700.0, wdth=100.0	opsz=96.0, wght=700.0, wdth=100.0
ExtraBold	opsz=14.0, wght=800.0, wdth=100.0	opsz=96.0, wght=800.0, wdth=100.0

⚠ WARN: Combined length of family and style must not exceed 27 characters. (com.google.fonts/check/name/family_and_style_max_length)

• ⚠ WARN The combined length of family and style exceeds 27 chars in the following 'WINDOWS' entries:
  FONT_FAMILY_NAME = 'Bricolage Grotesque 96pt ExtraBold' / SUBFAMILY_NAME = 'Regular'

Please take a look at the conversation at fonttools/fontbakery#2179 in order to understand the reasoning behind these name table records max-length criteria. [code: too-long]

⚠ WARN: A static fonts directory with at least two fonts must accompany variable fonts (com.google.fonts/check/repo/vf_has_static_fonts)

• ⚠ WARN Please consider adding a subdirectory called "static/" and including in it static font files. [code: missing]

⚠ WARN: Ensure variable fonts include an avar table. (com.google.fonts/check/mandatory_avar_table)

• ⚠ WARN This variable font does not have an avar table. [code: missing-avar]

⚠ WARN: Ensure fonts have ScriptLangTags declared on the 'meta' table. (com.google.fonts/check/meta/script_lang_tags)

• ⚠ WARN This font file does not have a 'meta' table. [code: lacks-meta-table]

⚠ WARN: Ensure dotted circle glyph is present and can attach marks. (com.google.fonts/check/dotted_circle)

• ⚠ WARN No dotted circle glyph present [code: missing-dotted-circle]

⚠ WARN: Ensure soft_dotted characters lose their dot when combined with marks that replace the dot. (com.google.fonts/check/soft_dotted)

• ⚠ WARN The dot of soft dotted characters should disappear in other cases, for example: ĭ̦ i̦̇ i̦̊ i̦̋ ǐ̦ i̦̒ j̦̀ j̦́ ĵ̦ j̦̃ j̦̄ j̦̆ j̦̇ j̦̈ j̦̉ j̦̊ j̦̋ ǰ̦ j̦̒ į̦̀ [code: soft-dotted]

ℹ INFO: Does DESCRIPTION file contain a upstream Git repo URL? (com.google.fonts/check/description/git_url)

• ℹ INFO Found a git repo URL: https://github.com/ateliertriay/bricolage [code: url-found]

ℹ INFO: Show hinting filesize impact. (com.google.fonts/check/hinting_impact)

• ℹ INFO Hinting filesize impact:

	ofl/bricolagegrotesque/BricolageGrotesque[opsz,wdth,wght].ttf
Dehinted Size	398.9kb
Hinted Size	398.9kb
Increase	24 bytes
Change	0.0 %
[code: size-impact]

ℹ INFO: Font has old ttfautohint applied? (com.google.fonts/check/old_ttfautohint)

• ℹ INFO Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.001;gftools[0.9.33.dev8+g029e19f]'] [code: version-not-detected]

ℹ INFO: EPAR table present in font? (com.google.fonts/check/epar)

• ℹ INFO EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818 [code: lacks-EPAR]

ℹ INFO: Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering? (com.google.fonts/check/gasp)

• ℹ INFO These are the ppm ranges declared on the gasp table:

PPM <= 65535:
flag = 0x0F
- Use grid-fitting
- Use grayscale rendering
- Use gridfitting with ClearType symmetric smoothing
- Use smoothing along multiple axes with ClearType®
[code: ranges]

ℹ INFO: Check for font-v versioning. (com.google.fonts/check/fontv)

• ℹ INFO Version string is: "Version 1.001;gftools[0.9.33.dev8+g029e19f]"
  The version string must ideally include a git commit hash and either a "dev" or a "release" suffix such as in the example below:
  "Version 1.3; git-0d08353-release" [code: bad-format]

ℹ INFO: Font contains all required tables? (com.google.fonts/check/required_tables)

• ℹ INFO This font contains the following optional tables:

  • loca

  • prep

  • GPOS

  • GSUB

  • gasp [code: optional-tables]

ℹ INFO: List all superfamily filepaths (com.google.fonts/check/superfamily/list)

• ℹ INFO ofl/bricolagegrotesque [code: family-path]

ℹ INFO: Font follows the family naming recommendations? (com.google.fonts/check/family_naming_recommendations)

• ℹ INFO Font does not follow some family naming recommendations:

Field	Value	Recommendation
Family Name	Bricolage Grotesque 96pt ExtraBold	exceeds max length (31)
[code: bad-entries]

Summary

💔 ERROR	🔥 FAIL	⚠ WARN	💤 SKIP	ℹ INFO	🍞 PASS	🔎 DEBUG
0	1	8	43	10	184	0
0%	0%	3%	17%	4%	75%	0%

Note: The following loglevels were omitted in this report:

• SKIP
• PASS
• DEBUG

issue was solved

[github-actions]

Fontbakery report

Fontbakery version: 0.8.13

[1] Family checks

ℹ INFO: Check axis ordering on the STAT table. (com.google.fonts/check/STAT/axis_order)

• ℹ INFO From a total of 1 font files, 0 of them (0.00%) lack a STAT table.

  And these are the most common STAT axis orderings:
  ('opsz-wdth-wght', 1) [code: summary]

[18] BricolageGrotesque[opsz,wdth,wght].ttf

🔥 FAIL: METADATA.pb font.name field contains font name in right format? (com.google.fonts/check/metadata/valid_name_values)

• 🔥 FAIL METADATA.pb font.name field ("Bricolage Grotesque") does not match correct font name format ("Bricolage Grotesque 96pt ExtraBold"). [code: mismatch]

⚠ WARN: Check for codepoints not covered by METADATA subsets. (com.google.fonts/check/metadata/unreachable_subsetting)

• ⚠ WARN The following codepoints supported by the font are not covered by
  any subsets defined in the font's metadata file, and will never
  be served. You can solve this by either manually adding additional
  subset declarations to METADATA.pb, or by editing the glyphset
  definitions.

• U+02C7 CARON: try adding one of: yi, tifinagh, canadian-aboriginal

• U+02D8 BREVE: try adding one of: yi, canadian-aboriginal

• U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal

• U+02DB OGONEK: try adding one of: yi, canadian-aboriginal

• U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: math, cherokee, coptic, tifinagh

• U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh

• U+0307 COMBINING DOT ABOVE: try adding one of: malayalam, coptic, tai-le, old-permic, tifinagh, canadian-aboriginal, math, syriac

• U+030A COMBINING RING ABOVE: try adding syriac

• U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee

• U+030C COMBINING CARON: try adding one of: cherokee, tai-le
  22 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext, latin, latin-ext, menu, vietnamese [code: unreachable-subsetting]

⚠ WARN: Check variable font instances (com.google.fonts/check/fvar_instances)

• ⚠ WARN fvar instance coordinates for non-wght axes are not the same as the fvar defaults. This may be intentional so please check with the font author:

Name	current	expected
ExtraLight	opsz=14.0, wght=200.0, wdth=100.0	opsz=96.0, wght=200.0, wdth=100.0
Light	opsz=14.0, wght=300.0, wdth=100.0	opsz=96.0, wght=300.0, wdth=100.0
Regular	opsz=14.0, wght=400.0, wdth=100.0	opsz=96.0, wght=400.0, wdth=100.0
Medium	opsz=14.0, wght=500.0, wdth=100.0	opsz=96.0, wght=500.0, wdth=100.0
SemiBold	opsz=14.0, wght=600.0, wdth=100.0	opsz=96.0, wght=600.0, wdth=100.0
Bold	opsz=14.0, wght=700.0, wdth=100.0	opsz=96.0, wght=700.0, wdth=100.0
ExtraBold	opsz=14.0, wght=800.0, wdth=100.0	opsz=96.0, wght=800.0, wdth=100.0

⚠ WARN: Combined length of family and style must not exceed 27 characters. (com.google.fonts/check/name/family_and_style_max_length)

• ⚠ WARN The combined length of family and style exceeds 27 chars in the following 'WINDOWS' entries:
  FONT_FAMILY_NAME = 'Bricolage Grotesque 96pt ExtraBold' / SUBFAMILY_NAME = 'Regular'

Please take a look at the conversation at fonttools/fontbakery#2179 in order to understand the reasoning behind these name table records max-length criteria. [code: too-long]

⚠ WARN: A static fonts directory with at least two fonts must accompany variable fonts (com.google.fonts/check/repo/vf_has_static_fonts)

• ⚠ WARN Please consider adding a subdirectory called "static/" and including in it static font files. [code: missing]

⚠ WARN: Ensure variable fonts include an avar table. (com.google.fonts/check/mandatory_avar_table)

• ⚠ WARN This variable font does not have an avar table. [code: missing-avar]

⚠ WARN: Ensure fonts have ScriptLangTags declared on the 'meta' table. (com.google.fonts/check/meta/script_lang_tags)

• ⚠ WARN This font file does not have a 'meta' table. [code: lacks-meta-table]

⚠ WARN: Ensure dotted circle glyph is present and can attach marks. (com.google.fonts/check/dotted_circle)

• ⚠ WARN No dotted circle glyph present [code: missing-dotted-circle]

⚠ WARN: Ensure soft_dotted characters lose their dot when combined with marks that replace the dot. (com.google.fonts/check/soft_dotted)

• ⚠ WARN The dot of soft dotted characters should disappear in other cases, for example: ĭ̦ i̦̇ i̦̊ i̦̋ ǐ̦ i̦̒ j̦̀ j̦́ ĵ̦ j̦̃ j̦̄ j̦̆ j̦̇ j̦̈ j̦̉ j̦̊ j̦̋ ǰ̦ j̦̒ į̦̀ [code: soft-dotted]

ℹ INFO: Does DESCRIPTION file contain a upstream Git repo URL? (com.google.fonts/check/description/git_url)

• ℹ INFO Found a git repo URL: https://github.com/ateliertriay/bricolage [code: url-found]

ℹ INFO: Show hinting filesize impact. (com.google.fonts/check/hinting_impact)

• ℹ INFO Hinting filesize impact:

	ofl/bricolagegrotesque/BricolageGrotesque[opsz,wdth,wght].ttf
Dehinted Size	398.9kb
Hinted Size	398.9kb
Increase	24 bytes
Change	0.0 %
[code: size-impact]

ℹ INFO: Font has old ttfautohint applied? (com.google.fonts/check/old_ttfautohint)

• ℹ INFO Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.001;gftools[0.9.33.dev8+g029e19f]'] [code: version-not-detected]

ℹ INFO: EPAR table present in font? (com.google.fonts/check/epar)

• ℹ INFO EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818 [code: lacks-EPAR]

ℹ INFO: Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering? (com.google.fonts/check/gasp)

• ℹ INFO These are the ppm ranges declared on the gasp table:

PPM <= 65535:
flag = 0x0F
- Use grid-fitting
- Use grayscale rendering
- Use gridfitting with ClearType symmetric smoothing
- Use smoothing along multiple axes with ClearType®
[code: ranges]

ℹ INFO: Check for font-v versioning. (com.google.fonts/check/fontv)

• ℹ INFO Version string is: "Version 1.001;gftools[0.9.33.dev8+g029e19f]"
  The version string must ideally include a git commit hash and either a "dev" or a "release" suffix such as in the example below:
  "Version 1.3; git-0d08353-release" [code: bad-format]

ℹ INFO: Font contains all required tables? (com.google.fonts/check/required_tables)

• ℹ INFO This font contains the following optional tables:

  • loca

  • prep

  • GPOS

  • GSUB

  • gasp [code: optional-tables]

ℹ INFO: List all superfamily filepaths (com.google.fonts/check/superfamily/list)

• ℹ INFO ofl/bricolagegrotesque [code: family-path]

ℹ INFO: Font follows the family naming recommendations? (com.google.fonts/check/family_naming_recommendations)

• ℹ INFO Font does not follow some family naming recommendations:

Field	Value	Recommendation
Family Name	Bricolage Grotesque 96pt ExtraBold	exceeds max length (31)
[code: bad-entries]

Summary

💔 ERROR	🔥 FAIL	⚠ WARN	💤 SKIP	ℹ INFO	🍞 PASS	🔎 DEBUG
0	1	8	43	10	184	0
0%	0%	3%	17%	4%	75%	0%

Note: The following loglevels were omitted in this report:

• SKIP
• PASS
• DEBUG

[github-actions]

Fontbakery report

Fontbakery version: 0.8.13

[1] Family checks

ℹ INFO: Check axis ordering on the STAT table. (com.google.fonts/check/STAT/axis_order)

• ℹ INFO From a total of 1 font files, 0 of them (0.00%) lack a STAT table.

  And these are the most common STAT axis orderings:
  ('opsz-wdth-wght', 1) [code: summary]

[18] BricolageGrotesque[opsz,wdth,wght].ttf

🔥 FAIL: METADATA.pb font.name field contains font name in right format? (com.google.fonts/check/metadata/valid_name_values)

• 🔥 FAIL METADATA.pb font.name field ("Bricolage Grotesque") does not match correct font name format ("Bricolage Grotesque 96pt ExtraBold"). [code: mismatch]

⚠ WARN: Check for codepoints not covered by METADATA subsets. (com.google.fonts/check/metadata/unreachable_subsetting)

• ⚠ WARN The following codepoints supported by the font are not covered by
  any subsets defined in the font's metadata file, and will never
  be served. You can solve this by either manually adding additional
  subset declarations to METADATA.pb, or by editing the glyphset
  definitions.

• U+02C7 CARON: try adding one of: yi, tifinagh, canadian-aboriginal

• U+02D8 BREVE: try adding one of: yi, canadian-aboriginal

• U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal

• U+02DB OGONEK: try adding one of: yi, canadian-aboriginal

• U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: coptic, tifinagh, cherokee, math

• U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh

• U+0307 COMBINING DOT ABOVE: try adding one of: tai-le, old-permic, tifinagh, syriac, canadian-aboriginal, math, malayalam, coptic

• U+030A COMBINING RING ABOVE: try adding syriac

• U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee

• U+030C COMBINING CARON: try adding one of: tai-le, cherokee
  22 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext, latin, latin-ext, menu, vietnamese [code: unreachable-subsetting]

⚠ WARN: Check variable font instances (com.google.fonts/check/fvar_instances)

• ⚠ WARN fvar instance coordinates for non-wght axes are not the same as the fvar defaults. This may be intentional so please check with the font author:

Name	current	expected
ExtraLight	opsz=14.0, wght=200.0, wdth=100.0	opsz=96.0, wght=200.0, wdth=100.0
Light	opsz=14.0, wght=300.0, wdth=100.0	opsz=96.0, wght=300.0, wdth=100.0
Regular	opsz=14.0, wght=400.0, wdth=100.0	opsz=96.0, wght=400.0, wdth=100.0
Medium	opsz=14.0, wght=500.0, wdth=100.0	opsz=96.0, wght=500.0, wdth=100.0
SemiBold	opsz=14.0, wght=600.0, wdth=100.0	opsz=96.0, wght=600.0, wdth=100.0
Bold	opsz=14.0, wght=700.0, wdth=100.0	opsz=96.0, wght=700.0, wdth=100.0
ExtraBold	opsz=14.0, wght=800.0, wdth=100.0	opsz=96.0, wght=800.0, wdth=100.0

⚠ WARN: Combined length of family and style must not exceed 27 characters. (com.google.fonts/check/name/family_and_style_max_length)

• ⚠ WARN The combined length of family and style exceeds 27 chars in the following 'WINDOWS' entries:
  FONT_FAMILY_NAME = 'Bricolage Grotesque 96pt ExtraBold' / SUBFAMILY_NAME = 'Regular'

Please take a look at the conversation at fonttools/fontbakery#2179 in order to understand the reasoning behind these name table records max-length criteria. [code: too-long]

⚠ WARN: A static fonts directory with at least two fonts must accompany variable fonts (com.google.fonts/check/repo/vf_has_static_fonts)

• ⚠ WARN Please consider adding a subdirectory called "static/" and including in it static font files. [code: missing]

⚠ WARN: Ensure variable fonts include an avar table. (com.google.fonts/check/mandatory_avar_table)

• ⚠ WARN This variable font does not have an avar table. [code: missing-avar]

⚠ WARN: Ensure fonts have ScriptLangTags declared on the 'meta' table. (com.google.fonts/check/meta/script_lang_tags)

• ⚠ WARN This font file does not have a 'meta' table. [code: lacks-meta-table]

⚠ WARN: Ensure dotted circle glyph is present and can attach marks. (com.google.fonts/check/dotted_circle)

• ⚠ WARN No dotted circle glyph present [code: missing-dotted-circle]

⚠ WARN: Ensure soft_dotted characters lose their dot when combined with marks that replace the dot. (com.google.fonts/check/soft_dotted)

• ⚠ WARN The dot of soft dotted characters should disappear in other cases, for example: ĭ̦ i̦̇ i̦̊ i̦̋ ǐ̦ i̦̒ j̦̀ j̦́ ĵ̦ j̦̃ j̦̄ j̦̆ j̦̇ j̦̈ j̦̉ j̦̊ j̦̋ ǰ̦ j̦̒ į̦̀ [code: soft-dotted]

ℹ INFO: Does DESCRIPTION file contain a upstream Git repo URL? (com.google.fonts/check/description/git_url)

• ℹ INFO Found a git repo URL: https://github.com/ateliertriay/bricolage [code: url-found]

ℹ INFO: Show hinting filesize impact. (com.google.fonts/check/hinting_impact)

• ℹ INFO Hinting filesize impact:

	ofl/bricolagegrotesque/BricolageGrotesque[opsz,wdth,wght].ttf
Dehinted Size	398.9kb
Hinted Size	398.9kb
Increase	24 bytes
Change	0.0 %
[code: size-impact]

ℹ INFO: Font has old ttfautohint applied? (com.google.fonts/check/old_ttfautohint)

• ℹ INFO Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.001;gftools[0.9.33.dev8+g029e19f]'] [code: version-not-detected]

ℹ INFO: EPAR table present in font? (com.google.fonts/check/epar)

• ℹ INFO EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818 [code: lacks-EPAR]

ℹ INFO: Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering? (com.google.fonts/check/gasp)

• ℹ INFO These are the ppm ranges declared on the gasp table:

PPM <= 65535:
flag = 0x0F
- Use grid-fitting
- Use grayscale rendering
- Use gridfitting with ClearType symmetric smoothing
- Use smoothing along multiple axes with ClearType®
[code: ranges]

ℹ INFO: Check for font-v versioning. (com.google.fonts/check/fontv)

• ℹ INFO Version string is: "Version 1.001;gftools[0.9.33.dev8+g029e19f]"
  The version string must ideally include a git commit hash and either a "dev" or a "release" suffix such as in the example below:
  "Version 1.3; git-0d08353-release" [code: bad-format]

ℹ INFO: Font contains all required tables? (com.google.fonts/check/required_tables)

• ℹ INFO This font contains the following optional tables:

  • loca

  • prep

  • GPOS

  • GSUB

  • gasp [code: optional-tables]

ℹ INFO: List all superfamily filepaths (com.google.fonts/check/superfamily/list)

• ℹ INFO ofl/bricolagegrotesque [code: family-path]

ℹ INFO: Font follows the family naming recommendations? (com.google.fonts/check/family_naming_recommendations)

• ℹ INFO Font does not follow some family naming recommendations:

Field	Value	Recommendation
Family Name	Bricolage Grotesque 96pt ExtraBold	exceeds max length (31)
[code: bad-entries]

Summary

💔 ERROR	🔥 FAIL	⚠ WARN	💤 SKIP	ℹ INFO	🍞 PASS	🔎 DEBUG
0	1	8	43	10	184	0
0%	0%	3%	17%	4%	75%	0%

Note: The following loglevels were omitted in this report:

• SKIP
• PASS
• DEBUG