instrument put_user #1

dvyukov · 2017-05-22T09:02:02Z

Need kmsan_check_memory check in put_user and friends (_nocheck/_ex variants).

netif_napi_del() should be paired with netif_napi_add(), however no such call takes place in ftgmac100_probe(). This triggers a NULL pointer dereference if e.g. no PHY is found by the MDIO probe: [ 2.770000] libphy: Fixed MDIO Bus: probed [ 2.770000] ftgmac100 1e660000.ethernet: Generated random MAC address 66:58:c0:5a:50:b8 [ 2.790000] libphy: ftgmac100_mdio: probed [ 2.790000] ftgmac100 1e660000.ethernet (unnamed net_device) (uninitialized): eth%d: no PHY found [ 2.790000] ftgmac100 1e660000.ethernet: MII Probe failed! [ 2.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 2.810000] pgd = 80004000 [ 2.810000] [00000004] *pgd=00000000 [ 2.810000] Internal error: Oops: 805 [#1] ARM [ 2.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.17-1a4df30c39cf5ee0e3d2528c409787ccbb4a672a #1 [ 2.810000] Hardware name: ASpeed SoC [ 2.810000] task: 9e421b60 task.stack: 9e4a0000 [ 2.810000] PC is at netif_napi_del+0x74/0xa4 [ 2.810000] LR is at ftgmac100_probe+0x290/0x674 [ 2.810000] pc : [<80331004>] lr : [<80292b30>] psr: 60000013 [ 2.810000] sp : 9e4a1d70 ip : 9e4a1d88 fp : 9e4a1d84 [ 2.810000] r10: 9e565000 r9 : ffffffed r8 : 00000007 [ 2.810000] r7 : 9e565480 r6 : 9ec072c0 r5 : 00000000 r4 : 9e5654d8 [ 2.810000] r3 : 9e565530 r2 : 00000000 r1 : 00000000 r0 : 9e5654d8 [ 2.810000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 2.810000] Control: 00c5387d Table: 80004008 DAC: 00000055 [ 2.810000] Process swapper (pid: 1, stack limit = 0x9e4a0188) [ 2.810000] Stack: (0x9e4a1d70 to 0x9e4a2000) [ 2.810000] 1d60: 9e565000 9e549e10 9e4a1dcc 9e4a1d88 [ 2.810000] 1d80: 80292b30 80330f9c ffffffff 9e4a1d98 80146058 9ec072c0 00009e10 00000000 [ 2.810000] 1da0: 9e549e18 9e549e10 ffffffed 805f81f4 fffffdfb 00000000 00000000 00000000 [ 2.810000] 1dc0: 9e4a1dec 9e4a1dd0 80243df8 802928ac 9e549e10 8062cbd8 8062cbe0 805f81f4 [ 2.810000] 1de0: 9e4a1e24 9e4a1df0 80242178 80243da4 803001d0 802ffa60 9e4a1e24 9e549e10 [ 2.810000] 1e00: 9e549e44 805f81f4 00000000 00000000 805b8840 8058a6b0 9e4a1e44 9e4a1e28 [ 2.810000] 1e20: 80242434 80241f04 00000000 805f81f4 80242344 00000000 9e4a1e6c 9e4a1e48 [ 2.810000] 1e40: 80240148 80242350 9e425bac 9e4fdc90 9e790e94 805f81f4 9e790e60 805f5640 [ 2.810000] 1e60: 9e4a1e7c 9e4a1e70 802425dc 802400d8 9e4a1ea4 9e4a1e80 80240ba8 802425c0 [ 2.810000] 1e80: 8050b6ac 9e4a1e90 805f81f4 ffffe000 805b8838 80616720 9e4a1ebc 9e4a1ea8 [ 2.810000] 1ea0: 80243068 80240a68 805ab24c ffffe000 9e4a1ecc 9e4a1ec0 80244a38 80242fec [ 2.810000] 1ec0: 9e4a1edc 9e4a1ed0 805ab264 80244a04 9e4a1f4c 9e4a1ee0 8058ae70 805ab258 [ 2.810000] 1ee0: 80032c68 801e3fd8 8052f800 8041af2c 9e4a1f4c 9e4a1f00 80032f90 8058a6bc [ 2.810000] 1f00: 9e4a1f2c 9e4a1f10 00000006 00000006 00000000 8052f220 805112f0 00000000 [ 2.810000] 1f20: 9e4a1f4c 00000006 80616720 805cf400 80616720 805b8838 80616720 00000057 [ 2.810000] 1f40: 9e4a1f94 9e4a1f50 8058b040 8058add0 00000006 00000006 00000000 8058a6b0 [ 2.810000] 1f60: 3940bf3d 00000007 f115c2e8 00000000 803fd158 00000000 00000000 00000000 [ 2.810000] 1f80: 00000000 00000000 9e4a1fac 9e4a1f98 803fd170 8058af38 00000000 803fd158 [ 2.810000] 1fa0: 00000000 9e4a1fb0 8000a5e8 803fd164 00000000 00000000 00000000 00000000 [ 2.810000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.810000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d11dcae8 af8ddec5 [ 2.810000] [<80331004>] (netif_napi_del) from [<80292b30>] (ftgmac100_probe+0x290/0x674) [ 2.810000] [<80292b30>] (ftgmac100_probe) from [<80243df8>] (platform_drv_probe+0x60/0xc0) [ 2.810000] [<80243df8>] (platform_drv_probe) from [<80242178>] (driver_probe_device+0x280/0x44c) [ 2.810000] [<80242178>] (driver_probe_device) from [<80242434>] (__driver_attach+0xf0/0x104) [ 2.810000] [<80242434>] (__driver_attach) from [<80240148>] (bus_for_each_dev+0x7c/0xb0) [ 2.810000] [<80240148>] (bus_for_each_dev) from [<802425dc>] (driver_attach+0x28/0x30) [ 2.810000] [<802425dc>] (driver_attach) from [<80240ba8>] (bus_add_driver+0x14c/0x268) [ 2.810000] [<80240ba8>] (bus_add_driver) from [<80243068>] (driver_register+0x88/0x104) [ 2.810000] [<80243068>] (driver_register) from [<80244a38>] (__platform_driver_register+0x40/0x54) [ 2.810000] [<80244a38>] (__platform_driver_register) from [<805ab264>] (ftgmac100_driver_init+0x18/0x20) [ 2.810000] [<805ab264>] (ftgmac100_driver_init) from [<8058ae70>] (do_one_initcall+0xac/0x168) [ 2.810000] [<8058ae70>] (do_one_initcall) from [<8058b040>] (kernel_init_freeable+0x114/0x1cc) [ 2.810000] [<8058b040>] (kernel_init_freeable) from [<803fd170>] (kernel_init+0x18/0x104) [ 2.810000] [<803fd170>] (kernel_init) from [<8000a5e8>] (ret_from_fork+0x14/0x2c) [ 2.810000] Code: e594205c e5941058 e2843058 e3a05000 (e5812004) [ 3.210000] ---[ end trace f32811052fd3860c ]--- Signed-off-by: Andrew Jeffery <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>

In commit, 139bb36 ("tipc: advance the time of deleting subscription from subscriber->subscrp_list"), we delete the subscription from the subscribers list and from nametable unconditionally. This leads to the following bug if the timer running tipc_subscrp_timeout() in another CPU accesses the subscription list after the subscription delete request. [39.570] general protection fault: 0000 [#1] SMP :: [39.574] task: ffffffff81c10540 task.stack: ffffffff81c00000 [39.575] RIP: 0010:tipc_subscrp_timeout+0x32/0x80 [tipc] [39.576] RSP: 0018:ffff88003ba03e90 EFLAGS: 00010282 [39.576] RAX: dead000000000200 RBX: ffff88003f0f3600 RCX: 0000000000000101 [39.577] RDX: dead000000000100 RSI: 0000000000000201 RDI: ffff88003f0d7948 [39.578] RBP: ffff88003ba03ea0 R08: 0000000000000001 R09: ffff88003ba03ef8 [39.579] R10: 000000000000014f R11: 0000000000000000 R12: ffff88003f0d7948 [39.580] R13: ffff88003f0f3618 R14: ffffffffa006c250 R15: ffff88003f0f3600 [39.581] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000 [39.582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39.583] CR2: 00007f831c6e0714 CR3: 000000003d3b0000 CR4: 00000000000006f0 [39.584] Call Trace: [39.584] <IRQ> [39.585] call_timer_fn+0x3d/0x180 [39.585] ? tipc_subscrb_rcv_cb+0x260/0x260 [tipc] [39.586] run_timer_softirq+0x168/0x1f0 [39.586] ? sched_clock_cpu+0x16/0xc0 [39.587] __do_softirq+0x9b/0x2de [39.587] irq_exit+0x60/0x70 [39.588] smp_apic_timer_interrupt+0x3d/0x50 [39.588] apic_timer_interrupt+0x86/0x90 [39.589] RIP: 0010:default_idle+0x20/0xf0 [39.589] RSP: 0018:ffffffff81c03e58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 [39.590] RAX: 0000000000000000 RBX: ffffffff81c10540 RCX: 0000000000000000 [39.591] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [39.592] RBP: ffffffff81c03e68 R08: 0000000000000000 R09: 0000000000000000 [39.593] R10: ffffc90001cbbe00 R11: 0000000000000000 R12: 0000000000000000 [39.594] R13: ffffffff81c10540 R14: 0000000000000000 R15: 0000000000000000 [39.595] </IRQ> :: [39.603] RIP: tipc_subscrp_timeout+0x32/0x80 [tipc] RSP: ffff88003ba03e90 [39.604] ---[ end trace 79ce94b7216cb459 ]--- Fixes: 139bb36 ("tipc: advance the time of deleting subscription from subscriber->subscrp_list") Signed-off-by: Parthasarathy Bhuvaragan <[email protected]> Signed-off-by: David S. Miller <[email protected]>

No matter whether a request is inserted into workqueue as a work item to cancel a subscription or to delete a subscription's subscriber asynchronously, the work items may be executed in different workers. As a result, it doesn't mean that one request which is raised prior to another request is definitely handled before the latter. By contrast, if the latter request is executed before the former request, below error may happen: [ 656.183644] BUG: spinlock bad magic on CPU#0, kworker/u8:0/12117 [ 656.184487] general protection fault: 0000 [#1] SMP [ 656.185160] Modules linked in: tipc ip6_udp_tunnel udp_tunnel 9pnet_virtio 9p 9pnet virtio_net virtio_pci virtio_ring virtio [last unloaded: ip6_udp_tunnel] [ 656.187003] CPU: 0 PID: 12117 Comm: kworker/u8:0 Not tainted 4.11.0-rc7+ #6 [ 656.187920] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 656.188690] Workqueue: tipc_rcv tipc_recv_work [tipc] [ 656.189371] task: ffff88003f5cec40 task.stack: ffffc90004448000 [ 656.190157] RIP: 0010:spin_bug+0xdd/0xf0 [ 656.190678] RSP: 0018:ffffc9000444bcb8 EFLAGS: 00010202 [ 656.191375] RAX: 0000000000000034 RBX: ffff88003f8d1388 RCX: 0000000000000000 [ 656.192321] RDX: ffff88003ba13708 RSI: ffff88003ba0cd08 RDI: ffff88003ba0cd08 [ 656.193265] RBP: ffffc9000444bcd0 R08: 0000000000000030 R09: 000000006b6b6b6b [ 656.194208] R10: ffff8800bde3e000 R11: 00000000000001b4 R12: 6b6b6b6b6b6b6b6b [ 656.195157] R13: ffffffff81a3ca64 R14: ffff88003f8d1388 R15: ffff88003f8d13a0 [ 656.196101] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000 [ 656.197172] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.197935] CR2: 00007f0b3d2e6000 CR3: 000000003ef9e000 CR4: 00000000000006f0 [ 656.198873] Call Trace: [ 656.199210] do_raw_spin_lock+0x66/0xa0 [ 656.199735] _raw_spin_lock_bh+0x19/0x20 [ 656.200258] tipc_subscrb_subscrp_delete+0x28/0xf0 [tipc] [ 656.200990] tipc_subscrb_rcv_cb+0x45/0x260 [tipc] [ 656.201632] tipc_receive_from_sock+0xaf/0x100 [tipc] [ 656.202299] tipc_recv_work+0x2b/0x60 [tipc] [ 656.202872] process_one_work+0x157/0x420 [ 656.203404] worker_thread+0x69/0x4c0 [ 656.203898] kthread+0x138/0x170 [ 656.204328] ? process_one_work+0x420/0x420 [ 656.204889] ? kthread_create_on_node+0x40/0x40 [ 656.205527] ret_from_fork+0x29/0x40 [ 656.206012] Code: 48 8b 0c 25 00 c5 00 00 48 c7 c7 f0 24 a3 81 48 81 c1 f0 05 00 00 65 8b 15 61 ef f5 7e e8 9a 4c 09 00 4d 85 e4 44 8b 4b 08 74 92 <45> 8b 84 24 40 04 00 00 49 8d 8c 24 f0 05 00 00 eb 8d 90 0f 1f [ 656.208504] RIP: spin_bug+0xdd/0xf0 RSP: ffffc9000444bcb8 [ 656.209798] ---[ end trace e2a800e6eb0770be ]--- In above scenario, the request of deleting subscriber was performed earlier than the request of canceling a subscription although the latter was issued before the former, which means tipc_subscrb_delete() was called before tipc_subscrp_cancel(). As a result, when tipc_subscrb_subscrp_delete() called by tipc_subscrp_cancel() was executed to cancel a subscription, the subscription's subscriber refcnt had been decreased to 1. After tipc_subscrp_delete() where the subscriber was freed because its refcnt was decremented to zero, but the subscriber's lock had to be released, as a consequence, panic happened. By contrast, if we increase subscriber's refcnt before tipc_subscrb_subscrp_delete() is called in tipc_subscrp_cancel(), the panic issue can be avoided. Fixes: d094c4d ("tipc: add subscription refcount to avoid invalid delete") Reported-by: Parthasarathy Bhuvaragan <[email protected]> Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Priit reported that stmmac was crashing with the trace below. This is because phy_attached_print() is called too early right after the PHY device has been found, but before it has a driver attached, since that is only done in phy_probe() which occurs later. Fix this by dealing with a possibly NULL phydev->drv point since that can happen here, but could also happen if we voluntarily did an unbind of the PHY device with the PHY driver. sun7i-dwmac 1c50000.ethernet: PTP uses main clock sun7i-dwmac 1c50000.ethernet: no reset control found sun7i-dwmac 1c50000.ethernet: no regulator found sun7i-dwmac 1c50000.ethernet: Ring mode enabled sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported sun7i-dwmac 1c50000.ethernet: Normal descriptors libphy: stmmac: probed Unable to handle kernel NULL pointer dereference at virtual address 00000048 pgd = c0004000 [00000048] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00318-g0065bd7fa384 #1 Hardware name: Allwinner sun7i (A20) Family task: ee868000 task.stack: ee85c000 PC is at phy_attached_print+0x1c/0x8c LR is at stmmac_mdio_register+0x12c/0x200 pc : [<c04510ac>] lr : [<c045e6b4>] psr: 60000013 sp : ee85ddc8 ip : 00000000 fp : c07dfb5c r10: ee981210 r9 : 00000001 r8 : eea73000 r7 : eeaa6dd0 r6 : eeb49800 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eeb49800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xee85c210) Stack: (0xee85ddc8 to 0xee85e000) ddc0: 00000000 00000002 eeb49400 eea72000 00000000 eeb49400 dde0: c045e6b4 00000000 ffffffff eeab0810 00000000 c08051f8 ee9292c0 c016d480 de00: eea725c0 eea73000 eea72000 00000001 eea726c0 c0457d0c 00000040 00000020 de20: 00000000 c045b850 00000001 00000000 ee981200 eeab0810 eeaa6ed0 ee981210 de40: 00000000 c094a4a0 00000000 c0465180 eeaa7550 f08d0000 c9ffb90c 00000032 de60: fffffffa 00000032 ee981210 ffffffed c0a46620 fffffdfb c0a46620 c03f7be8 de80: ee981210 c0a9a388 00000000 00000000 c0a46620 c03f63e0 ee981210 c0a46620 dea0: ee981244 00000000 00000007 000000c6 c094a4a0 c03f6534 00000000 c0a46620 dec0: c03f6490 c03f49ec ee828a58 ee9217b4 c0a46620 eeaa4b00 c0a43230 c03f59fc dee0: c08051f8 c094a49c c0a46620 c0a46620 00000000 c091c668 c093783c c03f6dfc df00: ffffe000 00000000 c091c668 c010177c eefe0938 eefe0935 c085e200 000000c6 df20: 00000005 c0136bc8 60000013 c080b3a4 00000006 00000006 c07ce7b4 00000000 df40: c07d7ddc c07cef28 eefe0938 eefe093e c0a0b2f0 c0a641c0 c0a641c0 c0a641c0 df60: c0937834 00000007 000000c6 c094a4a0 00000000 c0900d88 00000006 00000006 df80: 00000000 c09005a8 00000000 c060ecf4 00000000 00000000 00000000 00000000 dfa0: 00000000 c060ecfc 00000000 c0107738 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffdeffff ffffffff [<c04510ac>] (phy_attached_print) from [<c045e6b4>] (stmmac_mdio_register+0x12c/0x200) [<c045e6b4>] (stmmac_mdio_register) from [<c045b850>] (stmmac_dvr_probe+0x850/0x96c) [<c045b850>] (stmmac_dvr_probe) from [<c0465180>] (sun7i_gmac_probe+0x120/0x180) [<c0465180>] (sun7i_gmac_probe) from [<c03f7be8>] (platform_drv_probe+0x50/0xac) [<c03f7be8>] (platform_drv_probe) from [<c03f63e0>] (driver_probe_device+0x234/0x2e4) [<c03f63e0>] (driver_probe_device) from [<c03f6534>] (__driver_attach+0xa4/0xa8) [<c03f6534>] (__driver_attach) from [<c03f49ec>] (bus_for_each_dev+0x4c/0x9c) [<c03f49ec>] (bus_for_each_dev) from [<c03f59fc>] (bus_add_driver+0x190/0x214) [<c03f59fc>] (bus_add_driver) from [<c03f6dfc>] (driver_register+0x78/0xf4) [<c03f6dfc>] (driver_register) from [<c010177c>] (do_one_initcall+0x44/0x168) [<c010177c>] (do_one_initcall) from [<c0900d88>] (kernel_init_freeable+0x144/0x1d0) [<c0900d88>] (kernel_init_freeable) from [<c060ecfc>] (kernel_init+0x8/0x110) [<c060ecfc>] (kernel_init) from [<c0107738>] (ret_from_fork+0x14/0x3c) Code: e59021c8 e59d401c e590302c e3540000 (e5922048) ---[ end trace 39ae87c7923562d0 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Tested-By: Priit Laes <[email protected]> Fixes: fbca164 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>

inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy sizeof(sockaddr_storage) bytes to fill in sockaddr structs used to export diagnostic information to userspace. However, the memory allocated to store sockaddr information is smaller than that and depends on the address family, so we leak up to 100 uninitialized bytes to userspace. Just use the size of the source structs instead, in all the three cases this is what userspace expects. Zero out the remaining memory. Unused bytes (i.e. when IPv4 addresses are used) in source structs sctp_sockaddr_entry and sctp_transport are already cleared by sctp_add_bind_addr() and sctp_transport_new(), respectively. Noticed while testing KASAN-enabled kernel with 'ss': [ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800 [ 2326.896800] Read of size 128 by task ss/9527 [ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1 [ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 2326.917585] Call Trace: [ 2326.920312] dump_stack+0x63/0x8d [ 2326.924014] kasan_object_err+0x21/0x70 [ 2326.928295] kasan_report+0x288/0x540 [ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.938500] ? skb_put+0x8b/0xd0 [ 2326.942098] ? memset+0x31/0x40 [ 2326.945599] check_memory_region+0x13c/0x1a0 [ 2326.950362] memcpy+0x23/0x50 [ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag] [ 2326.966495] ? __lock_sock+0x102/0x150 [ 2326.970671] ? sock_def_wakeup+0x60/0x60 [ 2326.975048] ? remove_wait_queue+0xc0/0xc0 [ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag] [ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag] [ 2326.990504] ? memset+0x31/0x40 [ 2326.994007] ? mutex_lock+0x12/0x40 [ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag] [ 2327.003340] ? __sys_sendmsg+0x150/0x150 [ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag] [ 2327.012979] netlink_dump+0x1e6/0x490 [ 2327.017064] __netlink_dump_start+0x28e/0x2c0 [ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag] [ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag] [ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag] [ 2327.040965] ? __netlink_lookup+0x1b9/0x260 [ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0 [ 2327.050199] netlink_rcv_skb+0x14b/0x180 [ 2327.054574] ? sock_diag_bind+0x60/0x60 [ 2327.058850] sock_diag_rcv+0x28/0x40 [ 2327.062837] netlink_unicast+0x2e7/0x3b0 [ 2327.067212] ? netlink_attachskb+0x330/0x330 [ 2327.071975] ? kasan_check_write+0x14/0x20 [ 2327.076544] netlink_sendmsg+0x5be/0x730 [ 2327.080918] ? netlink_unicast+0x3b0/0x3b0 [ 2327.085486] ? kasan_check_write+0x14/0x20 [ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30 [ 2327.095109] ? netlink_unicast+0x3b0/0x3b0 [ 2327.099678] sock_sendmsg+0x74/0x80 [ 2327.103567] ___sys_sendmsg+0x520/0x530 [ 2327.107844] ? __get_locked_pte+0x178/0x200 [ 2327.112510] ? copy_msghdr_from_user+0x270/0x270 [ 2327.117660] ? vm_insert_page+0x360/0x360 [ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150 [ 2327.126895] ? vm_insert_pfn+0x32/0x40 [ 2327.131077] ? vvar_fault+0x71/0xd0 [ 2327.134968] ? special_mapping_fault+0x69/0x110 [ 2327.140022] ? __do_fault+0x42/0x120 [ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0 [ 2327.148965] ? __fget_light+0xa7/0xc0 [ 2327.153049] __sys_sendmsg+0xcb/0x150 [ 2327.157133] ? __sys_sendmsg+0xcb/0x150 [ 2327.161409] ? SyS_shutdown+0x140/0x140 [ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0 [ 2327.170646] ? __do_page_fault+0x55d/0x620 [ 2327.175216] ? __sys_sendmsg+0x150/0x150 [ 2327.179591] SyS_sendmsg+0x12/0x20 [ 2327.183384] do_syscall_64+0xe3/0x230 [ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25 [ 2327.192622] RIP: 0033:0x7f41d18fa3b0 [ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0 [ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003 [ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040 [ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003 [ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084 [ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64 [ 2327.251953] Allocated: [ 2327.254581] PID = 9484 [ 2327.257215] save_stack_trace+0x1b/0x20 [ 2327.261485] save_stack+0x46/0xd0 [ 2327.265179] kasan_kmalloc+0xad/0xe0 [ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0 [ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp] [ 2327.279400] sctp_do_bind+0x208/0x310 [sctp] [ 2327.284176] sctp_bind+0x61/0xa0 [sctp] [ 2327.288455] inet_bind+0x5f/0x3a0 [ 2327.292151] SYSC_bind+0x1a4/0x1e0 [ 2327.295944] SyS_bind+0xe/0x10 [ 2327.299349] do_syscall_64+0xe3/0x230 [ 2327.303433] return_from_SYSCALL_64+0x0/0x6a [ 2327.308194] Freed: [ 2327.310434] PID = 4131 [ 2327.313065] save_stack_trace+0x1b/0x20 [ 2327.317344] save_stack+0x46/0xd0 [ 2327.321040] kasan_slab_free+0x73/0xc0 [ 2327.325220] kfree+0x96/0x1a0 [ 2327.328530] dynamic_kobj_release+0x15/0x40 [ 2327.333195] kobject_release+0x99/0x1e0 [ 2327.337472] kobject_put+0x38/0x70 [ 2327.341266] free_notes_attrs+0x66/0x80 [ 2327.345545] mod_sysfs_teardown+0x1a5/0x270 [ 2327.350211] free_module+0x20/0x2a0 [ 2327.354099] SyS_delete_module+0x2cb/0x2f0 [ 2327.358667] do_syscall_64+0xe3/0x230 [ 2327.362750] return_from_SYSCALL_64+0x0/0x6a [ 2327.367510] Memory state around the buggy address: [ 2327.372855] ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc [ 2327.380914] ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00 [ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb [ 2327.397031] ^ [ 2327.401792] ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 2327.409850] ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00 [ 2327.417907] ================================================================== This fixes CVE-2017-7558. References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266 Fixes: 8f840e4 ("sctp: add the sctp_diag.c file") Cc: Xin Long <[email protected]> Cc: Vlad Yasevich <[email protected]> Cc: Neil Horman <[email protected]> Signed-off-by: Stefano Brivio <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Reviewed-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>

current switchdev drivers dont seem to support offloading fdb entries pointing to the bridge device which have fdb->dst not set to any port. This patch adds a NULL fdb->dst check in the switchdev notifier code. This patch fixes the below NULL ptr dereference: $bridge fdb add 00:02:00:00:00:33 dev br0 self [ 69.953374] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 69.954044] IP: br_switchdev_fdb_notify+0x29/0x80 [ 69.954044] PGD 66527067 [ 69.954044] P4D 66527067 [ 69.954044] PUD 7899c067 [ 69.954044] PMD 0 [ 69.954044] [ 69.954044] Oops: 0000 [#1] SMP [ 69.954044] Modules linked in: [ 69.954044] CPU: 1 PID: 3074 Comm: bridge Not tainted 4.13.0-rc6+ #1 [ 69.954044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 69.954044] task: ffff88007b827140 task.stack: ffffc90001564000 [ 69.954044] RIP: 0010:br_switchdev_fdb_notify+0x29/0x80 [ 69.954044] RSP: 0018:ffffc90001567918 EFLAGS: 00010246 [ 69.954044] RAX: 0000000000000000 RBX: ffff8800795e0880 RCX: 00000000000000c0 [ 69.954044] RDX: ffffc90001567920 RSI: 000000000000001c RDI: ffff8800795d0600 [ 69.954044] RBP: ffffc90001567938 R08: ffff8800795d0600 R09: 0000000000000000 [ 69.954044] R10: ffffc90001567a88 R11: ffff88007b849400 R12: ffff8800795e0880 [ 69.954044] R13: ffff8800795d0600 R14: ffffffff81ef8880 R15: 000000000000001c [ 69.954044] FS: 00007f93d3085700(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 [ 69.954044] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 69.954044] CR2: 0000000000000008 CR3: 0000000066551000 CR4: 00000000000006e0 [ 69.954044] Call Trace: [ 69.954044] fdb_notify+0x3f/0xf0 [ 69.954044] __br_fdb_add.isra.12+0x1a7/0x370 [ 69.954044] br_fdb_add+0x178/0x280 [ 69.954044] rtnl_fdb_add+0x10a/0x200 [ 69.954044] rtnetlink_rcv_msg+0x1b4/0x240 [ 69.954044] ? skb_free_head+0x21/0x40 [ 69.954044] ? rtnl_calcit.isra.18+0xf0/0xf0 [ 69.954044] netlink_rcv_skb+0xed/0x120 [ 69.954044] rtnetlink_rcv+0x15/0x20 [ 69.954044] netlink_unicast+0x180/0x200 [ 69.954044] netlink_sendmsg+0x291/0x370 [ 69.954044] ___sys_sendmsg+0x180/0x2e0 [ 69.954044] ? filemap_map_pages+0x2db/0x370 [ 69.954044] ? do_wp_page+0x11d/0x420 [ 69.954044] ? __handle_mm_fault+0x794/0xd80 [ 69.954044] ? vma_link+0xcb/0xd0 [ 69.954044] __sys_sendmsg+0x4c/0x90 [ 69.954044] SyS_sendmsg+0x12/0x20 [ 69.954044] do_syscall_64+0x63/0xe0 [ 69.954044] entry_SYSCALL64_slow_path+0x25/0x25 [ 69.954044] RIP: 0033:0x7f93d2bad690 [ 69.954044] RSP: 002b:00007ffc7217a638 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 69.954044] RAX: ffffffffffffffda RBX: 00007ffc72182eac RCX: 00007f93d2bad690 [ 69.954044] RDX: 0000000000000000 RSI: 00007ffc7217a670 RDI: 0000000000000003 [ 69.954044] RBP: 0000000059a1f7f8 R08: 0000000000000006 R09: 000000000000000a [ 69.954044] R10: 00007ffc7217a400 R11: 0000000000000246 R12: 00007ffc7217a670 [ 69.954044] R13: 00007ffc72182a98 R14: 00000000006114c0 R15: 00007ffc72182aa0 [ 69.954044] Code: 1f 00 66 66 66 66 90 55 48 89 e5 48 83 ec 20 f6 47 20 04 74 0a 83 fe 1c 74 09 83 fe 1d 74 2c c9 66 90 c3 48 8b 47 10 48 8d 55 e8 <48> 8b 70 08 0f b7 47 1e 48 83 c7 18 48 89 7d f0 bf 03 00 00 00 [ 69.954044] RIP: br_switchdev_fdb_notify+0x29/0x80 RSP: ffffc90001567918 [ 69.954044] CR2: 0000000000000008 [ 69.954044] ---[ end trace 03e9eec4a82c238b ]--- Fixes: 6b26b51 ("net: bridge: Add support for notifying devices about FDB add/del") Signed-off-by: Roopa Prabhu <[email protected]> Signed-off-by: David S. Miller <[email protected]>

If we do not have a master network device attached dst->cpu_dp will be NULL and accessing cpu_dp->netdev will create a trace similar to the one below. The correct check is on dst->cpu_dp period. [ 1.004650] DSA: switch 0 0 parsed [ 1.008078] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 1.016195] pgd = c0003000 [ 1.018918] [00000010] *pgd=80000000004003, *pmd=00000000 [ 1.024349] Internal error: Oops: 206 [#1] SMP ARM [ 1.029157] Modules linked in: [ 1.032228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00071-g45b45afab9bd-dirty #7 [ 1.040772] Hardware name: Broadcom STB (Flattened Device Tree) [ 1.046704] task: ee08f840 task.stack: ee090000 [ 1.051258] PC is at dsa_register_switch+0x5e0/0x9dc [ 1.056234] LR is at dsa_register_switch+0x5d0/0x9dc [ 1.061211] pc : [<c08fb28c>] lr : [<c08fb27c>] psr: 60000213 [ 1.067491] sp : ee091d88 ip : 00000000 fp : 0000000c [ 1.072728] r10: 00000000 r9 : 00000001 r8 : ee208010 [ 1.077965] r7 : ee2b57b0 r6 : ee2b5780 r5 : 00000000 r4 : ee208e0c [ 1.084506] r3 : 00000000 r2 : 00040d00 r1 : 2d1b2000 r0 : 00000016 [ 1.091050] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 1.098199] Control: 32c5387d Table: 00003000 DAC: fffffffd [ 1.103957] Process swapper/0 (pid: 1, stack limit = 0xee090210) Reported-by: Dan Carpenter <[email protected]> Fixes: 6d3c8c0 ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The commit below added a call to the ->destroy() callback for all qdiscs which failed in their ->init(), but some were not prepared for such change and can't handle partially initialized qdisc. HTB is one of them and if any error occurs before the qdisc watchdog timer and qdisc work are initialized then we can hit either a null ptr deref (timer->base) when canceling in ->destroy or lockdep error info about trying to register a non-static key and a stack dump. So to fix these two move the watchdog timer and workqueue init before anything that can err out. To reproduce userspace needs to send broken htb qdisc create request, tested with a modified tc (q_htb.c). Trace log: [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2710.897977] IP: hrtimer_active+0x17/0x8a [ 2710.898174] PGD 58fab067 [ 2710.898175] P4D 58fab067 [ 2710.898353] PUD 586c0067 [ 2710.898531] PMD 0 [ 2710.898710] [ 2710.899045] Oops: 0000 [#1] SMP [ 2710.899232] Modules linked in: [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54 [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000 [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246 [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000 [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298 [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001 [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000 [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0 [ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0 [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2710.903180] Call Trace: [ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93 [ 2710.903504] hrtimer_cancel+0x15/0x20 [ 2710.903667] qdisc_watchdog_cancel+0x12/0x14 [ 2710.903866] htb_destroy+0x2e/0xf7 [ 2710.904097] qdisc_create+0x377/0x3fd [ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd [ 2710.904511] rtnetlink_rcv_msg+0x188/0x197 [ 2710.904682] ? rcu_read_unlock+0x3e/0x5f [ 2710.904849] ? rtnl_newlink+0x729/0x729 [ 2710.905017] netlink_rcv_skb+0x6c/0xce [ 2710.905183] rtnetlink_rcv+0x23/0x2a [ 2710.905345] netlink_unicast+0x103/0x181 [ 2710.905511] netlink_sendmsg+0x326/0x337 [ 2710.905679] sock_sendmsg_nosec+0x14/0x3f [ 2710.905847] sock_sendmsg+0x29/0x2e [ 2710.906010] ___sys_sendmsg+0x209/0x28b [ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8 [ 2710.906346] ? _raw_spin_unlock+0x27/0x31 [ 2710.906514] ? __handle_mm_fault+0x651/0xdb1 [ 2710.906685] ? check_chain_key+0xb0/0xfd [ 2710.906855] __sys_sendmsg+0x45/0x63 [ 2710.907018] ? __sys_sendmsg+0x45/0x63 [ 2710.907185] SyS_sendmsg+0x19/0x1b [ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2 Note that probably this bug goes further back because the default qdisc handling always calls ->destroy on init failure too. Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1 ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The below commit added a call to ->destroy() on init failure, but multiq still frees ->queues on error in init, but ->queues is also freed by ->destroy() thus we get double free and corrupted memory. Very easy to reproduce (eth0 not multiqueue): $ tc qdisc add dev eth0 root multiq RTNETLINK answers: Operation not supported $ ip l add dumdum type dummy (crash) Trace log: [ 3929.467747] general protection fault: 0000 [#1] SMP [ 3929.468083] Modules linked in: [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56 [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000 [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246 [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020 [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000 [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564 [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00 [ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0 [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3929.474873] Call Trace: [ 3929.475337] ? kstrdup_const+0x23/0x25 [ 3929.475863] kstrdup+0x2e/0x4b [ 3929.476338] kstrdup_const+0x23/0x25 [ 3929.478084] __kernfs_new_node+0x28/0xbc [ 3929.478478] kernfs_new_node+0x35/0x55 [ 3929.478929] kernfs_create_link+0x23/0x76 [ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7 [ 3929.480096] sysfs_create_link+0x33/0x35 [ 3929.480649] device_add+0x200/0x589 [ 3929.481184] netdev_register_kobject+0x7c/0x12f [ 3929.481711] register_netdevice+0x373/0x471 [ 3929.482174] rtnl_newlink+0x614/0x729 [ 3929.482610] ? rtnl_newlink+0x17f/0x729 [ 3929.483080] rtnetlink_rcv_msg+0x188/0x197 [ 3929.483533] ? rcu_read_unlock+0x3e/0x5f [ 3929.483984] ? rtnl_newlink+0x729/0x729 [ 3929.484420] netlink_rcv_skb+0x6c/0xce [ 3929.484858] rtnetlink_rcv+0x23/0x2a [ 3929.485291] netlink_unicast+0x103/0x181 [ 3929.485735] netlink_sendmsg+0x326/0x337 [ 3929.486181] sock_sendmsg_nosec+0x14/0x3f [ 3929.486614] sock_sendmsg+0x29/0x2e [ 3929.486973] ___sys_sendmsg+0x209/0x28b [ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8 [ 3929.487719] ? _raw_spin_unlock+0x27/0x31 [ 3929.488092] ? __handle_mm_fault+0x651/0xdb1 [ 3929.488471] ? check_chain_key+0xb0/0xfd [ 3929.488847] __sys_sendmsg+0x45/0x63 [ 3929.489206] ? __sys_sendmsg+0x45/0x63 [ 3929.489576] SyS_sendmsg+0x19/0x1b [ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 3929.490172] RIP: 0033:0x7f0b6fb93690 [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690 [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003 [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000 [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002 [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000 [ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44 89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d 8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01 [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0 Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Fixes: f07d150 ("multiq: Further multiqueue cleanup") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

If sch_hhf fails in its ->init() function (either due to wrong user-space arguments as below or memory alloc failure of hh_flows) it will do a null pointer deref of q->hh_flows in its ->destroy() function. To reproduce the crash: $ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000 Crash log: [ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null) [ 690.655565] IP: hhf_destroy+0x48/0xbc [ 690.655944] PGD 37345067 [ 690.655948] P4D 37345067 [ 690.656252] PUD 58402067 [ 690.656554] PMD 0 [ 690.656857] [ 690.657362] Oops: 0000 [#1] SMP [ 690.657696] Modules linked in: [ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57 [ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 690.659255] task: ffff880058578000 task.stack: ffff88005acbc000 [ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc [ 690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246 [ 690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 [ 690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0 [ 690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000 [ 690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea [ 690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000 [ 690.663769] FS: 00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0 [ 690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 690.671003] Call Trace: [ 690.671743] qdisc_create+0x377/0x3fd [ 690.672534] tc_modify_qdisc+0x4d2/0x4fd [ 690.673324] rtnetlink_rcv_msg+0x188/0x197 [ 690.674204] ? rcu_read_unlock+0x3e/0x5f [ 690.675091] ? rtnl_newlink+0x729/0x729 [ 690.675877] netlink_rcv_skb+0x6c/0xce [ 690.676648] rtnetlink_rcv+0x23/0x2a [ 690.677405] netlink_unicast+0x103/0x181 [ 690.678179] netlink_sendmsg+0x326/0x337 [ 690.678958] sock_sendmsg_nosec+0x14/0x3f [ 690.679743] sock_sendmsg+0x29/0x2e [ 690.680506] ___sys_sendmsg+0x209/0x28b [ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1 [ 690.681915] ? check_chain_key+0xb0/0xfd [ 690.682449] __sys_sendmsg+0x45/0x63 [ 690.682954] ? __sys_sendmsg+0x45/0x63 [ 690.683471] SyS_sendmsg+0x19/0x1b [ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 690.684516] RIP: 0033:0x7f8ae529d690 [ 690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690 [ 690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003 [ 690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000 [ 690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002 [ 690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000 [ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf [ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83 c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02 00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1 [ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0 [ 690.690636] CR2: 0000000000000000 Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Fixes: 10239ed ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

CBQ can fail on ->init by wrong nl attributes or simply for missing any, f.e. if it's set as a default qdisc then TCA_OPTIONS (opt) will be NULL when it is activated. The first thing init does is parse opt but it will dereference a null pointer if used as a default qdisc, also since init failure at default qdisc invokes ->reset() which cancels all timers then we'll also dereference two more null pointers (timer->base) as they were never initialized. To reproduce: $ sysctl net.core.default_qdisc=cbq $ ip l set ethX up Crash log of the first null ptr deref: [44727.907454] BUG: unable to handle kernel NULL pointer dereference at (null) [44727.907600] IP: cbq_init+0x27/0x205 [44727.907676] PGD 59ff4067 [44727.907677] P4D 59ff4067 [44727.907742] PUD 59c70067 [44727.907807] PMD 0 [44727.907873] [44727.907982] Oops: 0000 [#1] SMP [44727.908054] Modules linked in: [44727.908126] CPU: 1 PID: 21312 Comm: ip Not tainted 4.13.0-rc6+ #60 [44727.908235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [44727.908477] task: ffff88005ad42700 task.stack: ffff880037214000 [44727.908672] RIP: 0010:cbq_init+0x27/0x205 [44727.908838] RSP: 0018:ffff8800372175f0 EFLAGS: 00010286 [44727.909018] RAX: ffffffff816c3852 RBX: ffff880058c53800 RCX: 0000000000000000 [44727.909222] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff8800372175f8 [44727.909427] RBP: ffff880037217650 R08: ffffffff81b0f380 R09: 0000000000000000 [44727.909631] R10: ffff880037217660 R11: 0000000000000020 R12: ffffffff822a44c0 [44727.909835] R13: ffff880058b92000 R14: 00000000ffffffff R15: 0000000000000001 [44727.910040] FS: 00007ff8bc583740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [44727.910339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [44727.910525] CR2: 0000000000000000 CR3: 00000000371e5000 CR4: 00000000000406e0 [44727.910731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [44727.910936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [44727.911141] Call Trace: [44727.911291] ? lockdep_init_map+0xb6/0x1ba [44727.911461] ? qdisc_alloc+0x14e/0x187 [44727.911626] qdisc_create_dflt+0x7a/0x94 [44727.911794] ? dev_activate+0x129/0x129 [44727.911959] attach_one_default_qdisc+0x36/0x63 [44727.912132] netdev_for_each_tx_queue+0x3d/0x48 [44727.912305] dev_activate+0x4b/0x129 [44727.912468] __dev_open+0xe7/0x104 [44727.912631] __dev_change_flags+0xc6/0x15c [44727.912799] dev_change_flags+0x25/0x59 [44727.912966] do_setlink+0x30c/0xb3f [44727.913129] ? check_chain_key+0xb0/0xfd [44727.913294] ? check_chain_key+0xb0/0xfd [44727.913463] rtnl_newlink+0x3a4/0x729 [44727.913626] ? rtnl_newlink+0x117/0x729 [44727.913801] ? ns_capable_common+0xd/0xb1 [44727.913968] ? ns_capable+0x13/0x15 [44727.914131] rtnetlink_rcv_msg+0x188/0x197 [44727.914300] ? rcu_read_unlock+0x3e/0x5f [44727.914465] ? rtnl_newlink+0x729/0x729 [44727.914630] netlink_rcv_skb+0x6c/0xce [44727.914796] rtnetlink_rcv+0x23/0x2a [44727.914956] netlink_unicast+0x103/0x181 [44727.915122] netlink_sendmsg+0x326/0x337 [44727.915291] sock_sendmsg_nosec+0x14/0x3f [44727.915459] sock_sendmsg+0x29/0x2e [44727.915619] ___sys_sendmsg+0x209/0x28b [44727.915784] ? do_raw_spin_unlock+0xcd/0xf8 [44727.915954] ? _raw_spin_unlock+0x27/0x31 [44727.916121] ? __handle_mm_fault+0x651/0xdb1 [44727.916290] ? check_chain_key+0xb0/0xfd [44727.916461] __sys_sendmsg+0x45/0x63 [44727.916626] ? __sys_sendmsg+0x45/0x63 [44727.916792] SyS_sendmsg+0x19/0x1b [44727.916950] entry_SYSCALL_64_fastpath+0x23/0xc2 [44727.917125] RIP: 0033:0x7ff8bbc96690 [44727.917286] RSP: 002b:00007ffc360991e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [44727.917579] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007ff8bbc96690 [44727.917783] RDX: 0000000000000000 RSI: 00007ffc36099230 RDI: 0000000000000003 [44727.917987] RBP: ffff880037217f98 R08: 0000000000000001 R09: 0000000000000003 [44727.918190] R10: 00007ffc36098fb0 R11: 0000000000000246 R12: 0000000000000006 [44727.918393] R13: 000000000066f1a0 R14: 00007ffc360a12e0 R15: 0000000000000000 [44727.918597] ? trace_hardirqs_off_caller+0xa7/0xcf [44727.918774] Code: 41 5f 5d c3 66 66 66 66 90 55 48 8d 56 04 45 31 c9 49 c7 c0 80 f3 b0 81 48 89 e5 41 55 41 54 53 48 89 fb 48 8d 7d a8 48 83 ec 48 <0f> b7 0e be 07 00 00 00 83 e9 04 e8 e6 f7 d8 ff 85 c0 0f 88 bb [44727.919332] RIP: cbq_init+0x27/0x205 RSP: ffff8800372175f0 [44727.919516] CR2: 0000000000000000 Fixes: 0fbbeb1 ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

netem can fail in ->init due to missing options (either not supplied by user-space or used as a default qdisc) causing a timer->base null pointer deref in its ->destroy() and ->reset() callbacks. Reproduce: $ sysctl net.core.default_qdisc=netem $ ip l set ethX up Crash log: [ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1814.847181] IP: hrtimer_active+0x17/0x8a [ 1814.847270] PGD 59c34067 [ 1814.847271] P4D 59c34067 [ 1814.847337] PUD 37374067 [ 1814.847403] PMD 0 [ 1814.847468] [ 1814.847582] Oops: 0000 [#1] SMP [ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O) [ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62 [ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000 [ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a [ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246 [ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000 [ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8 [ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff [ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000 [ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001 [ 1814.849616] FS: 00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0 [ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1814.850723] Call Trace: [ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93 [ 1814.851047] hrtimer_cancel+0x15/0x20 [ 1814.851211] qdisc_watchdog_cancel+0x12/0x14 [ 1814.851383] netem_reset+0xe6/0xed [sch_netem] [ 1814.851561] qdisc_destroy+0x8b/0xe5 [ 1814.851723] qdisc_create_dflt+0x86/0x94 [ 1814.851890] ? dev_activate+0x129/0x129 [ 1814.852057] attach_one_default_qdisc+0x36/0x63 [ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48 [ 1814.852406] dev_activate+0x4b/0x129 [ 1814.852569] __dev_open+0xe7/0x104 [ 1814.852730] __dev_change_flags+0xc6/0x15c [ 1814.852899] dev_change_flags+0x25/0x59 [ 1814.853064] do_setlink+0x30c/0xb3f [ 1814.853228] ? check_chain_key+0xb0/0xfd [ 1814.853396] ? check_chain_key+0xb0/0xfd [ 1814.853565] rtnl_newlink+0x3a4/0x729 [ 1814.853728] ? rtnl_newlink+0x117/0x729 [ 1814.853905] ? ns_capable_common+0xd/0xb1 [ 1814.854072] ? ns_capable+0x13/0x15 [ 1814.854234] rtnetlink_rcv_msg+0x188/0x197 [ 1814.854404] ? rcu_read_unlock+0x3e/0x5f [ 1814.854572] ? rtnl_newlink+0x729/0x729 [ 1814.854737] netlink_rcv_skb+0x6c/0xce [ 1814.854902] rtnetlink_rcv+0x23/0x2a [ 1814.855064] netlink_unicast+0x103/0x181 [ 1814.855230] netlink_sendmsg+0x326/0x337 [ 1814.855398] sock_sendmsg_nosec+0x14/0x3f [ 1814.855584] sock_sendmsg+0x29/0x2e [ 1814.855747] ___sys_sendmsg+0x209/0x28b [ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8 [ 1814.856082] ? _raw_spin_unlock+0x27/0x31 [ 1814.856251] ? __handle_mm_fault+0x651/0xdb1 [ 1814.856421] ? check_chain_key+0xb0/0xfd [ 1814.856592] __sys_sendmsg+0x45/0x63 [ 1814.856755] ? __sys_sendmsg+0x45/0x63 [ 1814.856923] SyS_sendmsg+0x19/0x1b [ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 1814.857256] RIP: 0033:0x7f733b2dd690 [ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690 [ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003 [ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003 [ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002 [ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000 [ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf [ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3 31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b 45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89 [ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590 [ 1814.860214] CR2: 0000000000000000 Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1 ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy callbacks but it may fail before the timer is initialized due to missing options (either not supplied by user-space or set as a default qdisc), also q->qdisc is used by ->reset and ->destroy so we need it initialized. Reproduce: $ sysctl net.core.default_qdisc=tbf $ ip l set ethX up Crash log: [ 959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 959.160323] IP: qdisc_reset+0xa/0x5c [ 959.160400] PGD 59cdb067 [ 959.160401] P4D 59cdb067 [ 959.160466] PUD 59ccb067 [ 959.160532] PMD 0 [ 959.160597] [ 959.160706] Oops: 0000 [#1] SMP [ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem [ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62 [ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000 [ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c [ 959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286 [ 959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000 [ 959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000 [ 959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff [ 959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0 [ 959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001 [ 959.162546] FS: 00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0 [ 959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 959.163638] Call Trace: [ 959.163788] tbf_reset+0x19/0x64 [sch_tbf] [ 959.163957] qdisc_destroy+0x8b/0xe5 [ 959.164119] qdisc_create_dflt+0x86/0x94 [ 959.164284] ? dev_activate+0x129/0x129 [ 959.164449] attach_one_default_qdisc+0x36/0x63 [ 959.164623] netdev_for_each_tx_queue+0x3d/0x48 [ 959.164795] dev_activate+0x4b/0x129 [ 959.164957] __dev_open+0xe7/0x104 [ 959.165118] __dev_change_flags+0xc6/0x15c [ 959.165287] dev_change_flags+0x25/0x59 [ 959.165451] do_setlink+0x30c/0xb3f [ 959.165613] ? check_chain_key+0xb0/0xfd [ 959.165782] rtnl_newlink+0x3a4/0x729 [ 959.165947] ? rtnl_newlink+0x117/0x729 [ 959.166121] ? ns_capable_common+0xd/0xb1 [ 959.166288] ? ns_capable+0x13/0x15 [ 959.166450] rtnetlink_rcv_msg+0x188/0x197 [ 959.166617] ? rcu_read_unlock+0x3e/0x5f [ 959.166783] ? rtnl_newlink+0x729/0x729 [ 959.166948] netlink_rcv_skb+0x6c/0xce [ 959.167113] rtnetlink_rcv+0x23/0x2a [ 959.167273] netlink_unicast+0x103/0x181 [ 959.167439] netlink_sendmsg+0x326/0x337 [ 959.167607] sock_sendmsg_nosec+0x14/0x3f [ 959.167772] sock_sendmsg+0x29/0x2e [ 959.167932] ___sys_sendmsg+0x209/0x28b [ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8 [ 959.168267] ? _raw_spin_unlock+0x27/0x31 [ 959.168432] ? __handle_mm_fault+0x651/0xdb1 [ 959.168602] ? check_chain_key+0xb0/0xfd [ 959.168773] __sys_sendmsg+0x45/0x63 [ 959.168934] ? __sys_sendmsg+0x45/0x63 [ 959.169100] SyS_sendmsg+0x19/0x1b [ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 959.169432] RIP: 0033:0x7fcc5097e690 [ 959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690 [ 959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003 [ 959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003 [ 959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006 [ 959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000 [ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf [ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24 98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89 e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb [ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610 [ 959.171821] CR2: 0000000000000018 Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1 ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

This reverts commit 7ad813f ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") because it is creating the possibility for a NULL pointer dereference. David Daney provide the following call trace and diagram of events: When ndo_stop() is called we call: phy_disconnect() +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL; +---> phy_stop_machine() | +---> phy_state_machine() | +----> queue_delayed_work(): Work queued. +--->phy_detach() implies: phydev->attached_dev = NULL; Now at a later time the queued work does: phy_state_machine() +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL: CPU 12 Unable to handle kernel paging request at virtual address 0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c Oops[#1]: CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1 Workqueue: events_power_efficient phy_state_machine task: 80000004021ed100 task.stack: 8000000409d70000 $ 0 : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004 $ 4 : 0000000000000000 0000000000000001 0000000000000004 0000000000000000 $ 8 : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000 $12 : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b $16 : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800 $20 : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008 $24 : 0000000000000061 ffffffff808637b0 $28 : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c Hi : 000000000000002a Lo : 000000000000003f epc : ffffffff80de37ec netif_carrier_off+0xc/0x58 ra : ffffffff80c7804c phy_state_machine+0x48c/0x4f8 Status: 14009ce3 KX SX UX KERNEL EXL IE Cause : 00800008 (ExcCode 02) BadVA : 0000000000000048 PrId : 000d9501 (Cavium Octeon III) Modules linked in: Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000, task=80000004021ed100, tls=0000000000000000) Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00 0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300 80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001 ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000 8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000 ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240 0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00 8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8 8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08 8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080 ... Call Trace: [<ffffffff80de37ec>] netif_carrier_off+0xc/0x58 [<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8 [<ffffffff808a1708>] process_one_work+0x158/0x368 [<ffffffff808a1ac0>] worker_thread+0x150/0x4c0 [<ffffffff808a8598>] kthread+0xc8/0xe0 [<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c The original motivation for this change originated from Marc Gonzales indicating that his network driver did not have its adjust_link callback executing with phydev->link = 0 while he was expecting it. PHYLIB has never made any such guarantees ever because phy_stop() merely just tells the workqueue to move into PHY_HALTED state which will happen asynchronously. Reported-by: Geert Uytterhoeven <[email protected]> Reported-by: David Daney <[email protected]> Fixes: 7ad813f ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>

syzkaller reported a crash in ata_bmdma_fill_sg() when writing to /dev/sg1. The immediate cause was that the ATA command's scatterlist was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a write to 'qc->ap->bmdma_prd[0xffffffff]'. Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The root cause is that when __ata_scsi_queuecmd() is preparing to relay a SCSI command to an ATAPI device, it doesn't correctly validate the CDB length before copying it into the 16-byte buffer 'cdb' in 'struct ata_queued_cmd'. Namely, it validates the fixed CDB length expected based on the SCSI opcode but not the actual CDB length, which can be larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is the next member in ata_queued_cmd, a buffer overflow corrupts it. Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN). [Really it seems the length should be required to be <= dev->cdb_len, but the current behavior seems to have been intentionally introduced by commit 607126c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") to work around a userspace bug in mplayer. Probably the workaround is no longer needed (mplayer was fixed in 2007), but continuing to allow lengths to up 16 appears harmless for now.] Here's a reproducer that works in QEMU when /dev/sg1 refers to the CD-ROM drive that qemu-system-x86_64 creates by default: #include <fcntl.h> #include <sys/ioctl.h> #include <unistd.h> #define SG_NEXT_CMD_LEN 0x2283 int main() { char buf[53] = { [36] = 0x7e, [52] = 0x02 }; int fd = open("/dev/sg1", O_RDWR); ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 }); write(fd, buf, sizeof(buf)); } The crash was: BUG: unable to handle kernel paging request at ffff8cb97db37ffc IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline] IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727 PGD fb6c067 P4D fb6c067 PUD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [...] Call Trace: ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421 ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline] ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375 scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727 scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865 __blk_run_queue_uncond block/blk-core.c:412 [inline] __blk_run_queue+0x3a/0x60 block/blk-core.c:432 blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78 sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806 sg_write+0x1ef/0x340 drivers/scsi/sg.c:677 __vfs_write+0x31/0x160 fs/read_write.c:480 vfs_write+0xa7/0x160 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0x4d/0xc0 fs/read_write.c:581 do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x21/0x86 Fixes: 607126c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com Cc: <[email protected]> # v2.6.24+ Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Tejun Heo <[email protected]>

Since commit 59dc3d8 ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53") the following warnings are seen on i.MX53: [ 2.776190] ------------[ cut here ]------------ [ 2.780948] WARNING: CPU: 0 PID: 1 at ../drivers/clk/clk.c:811 clk_core_disable+0xc4/0xe0 [ 2.789145] Modules linked in: [ 2.792236] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115 #1 [ 2.799735] Hardware name: Freescale i.MX53 (Device Tree Support) [ 2.805845] Backtrace: [ 2.808329] [<c010d1a0>] (dump_backtrace) from [<c010d460>] (show_stack+0x18/0x1c) [ 2.815919] r7:00000000 r6:60000093 r5:00000000 r4:c10798d4 [ 2.821607] [<c010d448>] (show_stack) from [<c0a353ec>] (dump_stack+0xb4/0xe8) [ 2.828854] [<c0a35338>] (dump_stack) from [<c0126144>] (__warn+0xf0/0x11c) [ 2.835837] r9:00000000 r8:0000032b r7:00000009 r6:c0d429f8 r5:00000000 r4:00000000 [ 2.843601] [<c0126054>] (__warn) from [<c0126288>] (warn_slowpath_null+0x44/0x50) [ 2.851191] r8:c1008908 r7:c0e08874 r6:c04bfac8 r5:0000032b r4:c0d429f8 [ 2.857913] [<c0126244>] (warn_slowpath_null) from [<c04bfac8>] (clk_core_disable+0xc4/0xe0) [ 2.866369] r6:dc02bb00 r5:dc02a980 r4:dc02a980 [ 2.871011] [<c04bfa04>] (clk_core_disable) from [<c04c0e54>] (clk_core_disable_lock+0x20/0x2c) [ 2.879726] r5:dc02a980 r4:80000013 [ 2.883323] [<c04c0e34>] (clk_core_disable_lock) from [<c04c0e84>] (clk_disable+0x24/0x28) [ 2.891604] r5:c0f6b3e4 r4:0000001c [ 2.895209] [<c04c0e60>] (clk_disable) from [<c0f2340c>] (imx_clk_disable_uart+0x50/0x68) [ 2.903412] [<c0f233bc>] (imx_clk_disable_uart) from [<c010277c>] (do_one_initcall+0x50/0x19c) [ 2.912043] r7:c0e08874 r6:c0f63854 r5:c0f233bc r4:ffffe000 [ 2.917726] [<c010272c>] (do_one_initcall) from [<c0f00f00>] (kernel_init_freeable+0x118/0x1d0) [ 2.926447] r9:c0f63858 r8:000000f0 r7:c0e08874 r6:c0f63854 r5:c107b500 r4:c0f75260 [ 2.934220] [<c0f00de8>] (kernel_init_freeable) from [<c0a4a5f0>] (kernel_init+0x10/0x118) [ 2.942506] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a4a5e0 [ 2.950351] r4:00000000 [ 2.952908] [<c0a4a5e0>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) [ 2.960496] Exception stack(0xdc05dfb0 to 0xdc05dff8) [ 2.965569] dfa0: 00000000 00000000 00000000 00000000 [ 2.973768] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.981965] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 2.988596] r5:c0a4a5e0 r4:00000000 [ 2.992188] ---[ end trace 346e26f708876edd ]--- [ 2.997420] ------------[ cut here ]------------ In order to fix the problem UART4/5 registration needs to happen only on i.MX50 and i.MX53. So let mx51_clocks_init() register only UART1-3 and mx50_clocks_init()/mx53_clocks_init register all the UART1-5 ports. Fixes: 59dc3d8 ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Signed-off-by: Shawn Guo <[email protected]>

The requirements around atomic_add() / atomic64_add() resp. their JIT implementations differ across architectures. E.g. while x86_64 seems just fine with BPF's xadd on unaligned memory, on arm64 it triggers via interpreter but also JIT the following crash: [ 830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703 [...] [ 830.916161] Internal error: Oops: 96000021 [#1] SMP [ 830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8 [ 830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017 [ 830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 831.003793] pc : __ll_sc_atomic_add+0x4/0x18 [ 831.008055] lr : ___bpf_prog_run+0x1198/0x1588 [ 831.012485] sp : ffff00001ccabc20 [ 831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00 [ 831.021087] x27: 0000000000000001 x26: 0000000000000000 [ 831.026387] x25: 000000c168d9db98 x24: 0000000000000000 [ 831.031686] x23: ffff000008203878 x22: ffff000009488000 [ 831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0 [ 831.042286] x19: ffff0000097b5080 x18: 0000000000000a03 [ 831.047585] x17: 0000000000000000 x16: 0000000000000000 [ 831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000 [ 831.058184] x13: 0000000000000000 x12: 0000000000000000 [ 831.063484] x11: 0000000000000001 x10: 0000000000000000 [ 831.068783] x9 : 0000000000000000 x8 : 0000000000000000 [ 831.074083] x7 : 0000000000000000 x6 : 000580d428000000 [ 831.079383] x5 : 0000000000000018 x4 : 0000000000000000 [ 831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001 [ 831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001 [ 831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044) [ 831.102577] Call trace: [ 831.105012] __ll_sc_atomic_add+0x4/0x18 [ 831.108923] __bpf_prog_run32+0x4c/0x70 [ 831.112748] bpf_test_run+0x78/0xf8 [ 831.116224] bpf_prog_test_run_xdp+0xb4/0x120 [ 831.120567] SyS_bpf+0x77c/0x1110 [ 831.123873] el0_svc_naked+0x30/0x34 [ 831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31) Reason for this is because memory is required to be aligned. In case of BPF, we always enforce alignment in terms of stack access, but not when accessing map values or packet data when the underlying arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set. xadd on packet data that is local to us anyway is just wrong, so forbid this case entirely. The only place where xadd makes sense in fact are map values; xadd on stack is wrong as well, but it's been around for much longer. Specifically enforce strict alignment in case of xadd, so that we handle this case generically and avoid such crashes in the first place. Fixes: 17a5267 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>

Previously, if a tunnel was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our tunnel will be detached anyway). BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: __lock_acquire+0x263/0x1630 PGD 0 P4D 0 Oops: 0000 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129 Workqueue: l2tp l2tp_tunnel_del_work RIP: 0010:__lock_acquire+0x263/0x1630 RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0 R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0 Call Trace: ? __lock_acquire+0xc77/0x1630 ? console_trylock+0x11/0xa0 lock_acquire+0x117/0x230 ? lock_sock_nested+0x3a/0xa0 _raw_spin_lock_bh+0x3a/0x50 ? lock_sock_nested+0x3a/0xa0 lock_sock_nested+0x3a/0xa0 inet_shutdown+0x33/0xf0 l2tp_tunnel_del_work+0x60/0xef process_one_work+0x1ea/0x5f0 ? process_one_work+0x162/0x5f0 worker_thread+0x48/0x3e0 ? trace_hardirqs_on+0xd/0x10 kthread+0x108/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_stop+0x2a0/0x2a0 ret_from_fork+0x24/0x30 Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85 68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c 24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70 CR2: 00000000000000a0 Fixes: 309795f ("l2tp: Add netlink control API for L2TP") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>

when sock_create_kern(..., a) returns an error, 'a' might not be a valid pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and and a->sk->sk_rcvbuf; not doing that caused the following crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746 RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020 RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0 FS: 0000000001afb880(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sock_create+0x4d4/0x850 net/socket.c:1285 sock_create net/socket.c:1325 [inline] SYSC_socketpair net/socket.c:1409 [inline] SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x4404b9 RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031 R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00 RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8 Fixes: cd6851f smc: remote memory buffers (RMBs) Reported-and-tested-by: [email protected] Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>

dev_get_by_index is being called in addr_resolve function which returns NULL and NULL pointer access leads to kernel crash. Following call trace is observed while running rdma_lat test application [ 146.173149] BUG: unable to handle kernel NULL pointer dereference at 00000000000004a0 [ 146.173198] IP: addr_resolve+0x9e/0x3e0 [ib_core] [ 146.173221] PGD 0 P4D 0 [ 146.173869] Oops: 0000 [#1] SMP PTI [ 146.182859] CPU: 8 PID: 127 Comm: kworker/8:1 Tainted: G O 4.15.0-rc6+ #18 [ 146.183758] Hardware name: LENOVO System x3650 M5: -[8871AC1]-/01KN179, BIOS-[TCE132H-2.50]- 10/11/2017 [ 146.184691] Workqueue: ib_cm cm_work_handler [ib_cm] [ 146.185632] RIP: 0010:addr_resolve+0x9e/0x3e0 [ib_core] [ 146.186584] RSP: 0018:ffffc9000362faa0 EFLAGS: 00010246 [ 146.187521] RAX: 000000000000001b RBX: ffffc9000362fc08 RCX: 0000000000000006 [ 146.188472] RDX: 0000000000000000 RSI: 0000000000000096 RDI : ffff88087fc16990 [ 146.189427] RBP: ffffc9000362fb18 R08: 00000000ffffff9d R09: 00000000000004ac [ 146.190392] R10: 00000000000001e7 R11: 0000000000000001 R12: ffff88086af2e090 [ 146.191361] R13: 0000000000000000 R14: 0000000000000001 R15: 00000000ffffff9d [ 146.192327] FS: 0000000000000000(0000) GS:ffff88087fc00000(0000) knlGS:0000000000000000 [ 146.193301] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 146.194274] CR2: 00000000000004a0 CR3: 000000000220a002 CR4: 00000000003606e0 [ 146.195258] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 146.196256] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 146.197231] Call Trace: [ 146.198209] ? rdma_addr_register_client+0x30/0x30 [ib_core] [ 146.199199] rdma_resolve_ip+0x1af/0x280 [ib_core] [ 146.200196] rdma_addr_find_l2_eth_by_grh+0x154/0x2b0 [ib_core] The below patch adds the missing NULL pointer check returned by dev_get_by_index before accessing the netdev to avoid kernel crash. We observed the below crash when we try to do the below test. server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rdma_lat -c -n 2 -s 1024 On client:rdma_lat 1.1.1.1 -c -n 2 -s 1024 Fixes: 2002983 ("IB/core: Validate route when we init ah") Signed-off-by: Muneendra <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

We've got a kernel panic when using sata disk with sas controller: [115946.152283] Unable to handle kernel NULL pointer dereference at virtual address 000007d8 [115946.223963] CPU: 0 PID: 22175 Comm: kworker/0:1 Tainted: G W OEL 4.14.0 #1 [115946.232925] Workqueue: events ata_scsi_hotplug [115946.237938] task: ffff8021ee50b180 task.stack: ffff00000d5d0000 [115946.244717] PC is at sas_find_dev_by_rphy+0x44/0x114 [115946.250224] LR is at sas_find_dev_by_rphy+0x3c/0x114 ...... [115946.355701] Process kworker/0:1 (pid: 22175, stack limit = 0xffff00000d5d0000) [115946.363369] Call trace: [115946.456356] [<ffff000008878a9c>] sas_find_dev_by_rphy+0x44/0x114 [115946.462908] [<ffff000008878b8c>] sas_target_alloc+0x20/0x5c [115946.469408] [<ffff00000885a31c>] scsi_alloc_target+0x250/0x308 [115946.475781] [<ffff00000885ba30>] __scsi_add_device+0xb0/0x154 [115946.481991] [<ffff0000088b520c>] ata_scsi_scan_host+0x180/0x218 [115946.488367] [<ffff0000088b53d8>] ata_scsi_hotplug+0xb0/0xcc [115946.494801] [<ffff0000080ebd70>] process_one_work+0x144/0x390 [115946.501115] [<ffff0000080ec100>] worker_thread+0x144/0x418 [115946.507093] [<ffff0000080f2c98>] kthread+0x10c/0x138 [115946.512792] [<ffff0000080855dc>] ret_from_fork+0x10/0x18 We found that Ding Xiang has reported a similar bug before: https://patchwork.kernel.org/patch/9179817/ And this bug still exists in mainline. Since libsas handles hotplug and device adding/removing itself, do not need to schedule ata hot plug task here if it is a sas host. Signed-off-by: Jason Yan <[email protected]> Cc: Ding Xiang <[email protected]> Cc: [email protected] Signed-off-by: Tejun Heo <[email protected]>

BUG: unable to handle kernel NULL pointer dereference at 0000000000000100 [ 985.596918] IP: _raw_spin_lock_bh+0x17/0x30 [ 985.601581] PGD 0 P4D 0 [ 985.604405] Oops: 0002 [#1] SMP : [ 985.704533] CPU: 16 PID: 1156 Comm: qedi_thread/16 Not tainted 4.16.0-rc2 #1 [ 985.712397] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.4.3 01/17/2017 [ 985.720747] RIP: 0010:_raw_spin_lock_bh+0x17/0x30 [ 985.725996] RSP: 0018:ffffa4b1c43d3e10 EFLAGS: 00010246 [ 985.731823] RAX: 0000000000000000 RBX: ffff94a31bd03000 RCX: 0000000000000000 [ 985.739783] RDX: 0000000000000001 RSI: ffff94a32fa16938 RDI: 0000000000000100 [ 985.747744] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000a33 [ 985.755703] R10: 0000000000000000 R11: ffffa4b1c43d3af0 R12: 0000000000000000 [ 985.763662] R13: ffff94a301f40818 R14: 0000000000000000 R15: 000000000000000c [ 985.771622] FS: 0000000000000000(0000) GS:ffff94a32fa00000(0000) knlGS:0000000000000000 [ 985.780649] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 985.787057] CR2: 0000000000000100 CR3: 000000067a009006 CR4: 00000000001606e0 [ 985.795017] Call Trace: [ 985.797747] qedi_fp_process_cqes+0x258/0x980 [qedi] [ 985.803294] qedi_percpu_io_thread+0x10f/0x1b0 [qedi] [ 985.808931] kthread+0xf5/0x130 [ 985.812434] ? qedi_free_uio+0xd0/0xd0 [qedi] [ 985.817298] ? kthread_bind+0x10/0x10 [ 985.821372] ? do_syscall_64+0x6e/0x1a0 Signed-off-by: Manish Rangankar <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

Currently we can crash perf record when running in pipe mode, like: $ perf record ls | perf report # To display the perf.data header info, please use --header/--header-only options. # perf: Segmentation fault Error: The - file has no samples! The callstack of the crash is: 0x0000000000515242 in perf_event__synthesize_event_update_name 3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]); (gdb) bt #0 0x0000000000515242 in perf_event__synthesize_event_update_name #1 0x00000000005158a4 in perf_event__synthesize_extra_attr #2 0x0000000000443347 in record__synthesize #3 0x00000000004438e3 in __cmd_record #4 0x000000000044514e in cmd_record #5 0x00000000004cbc95 in run_builtin #6 0x00000000004cbf02 in handle_internal_command #7 0x00000000004cc054 in run_argv #8 0x00000000004cc422 in main The reason of the crash is that the evsel does not have ids array allocated and the pipe's synthesize code tries to access it. We don't force evsel ids allocation when we have single event, because it's not needed. However we need it when we are in pipe mode even for single event as a key for evsel update event. Fixing this by forcing evsel ids allocation event for single event, when we are in pipe mode. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: [email protected] Signed-off-by: Danilo Krummrich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

__dev_mc_add grabs an adress spinlock so use atomic context in kmalloc. / # ifconfig eth0 inet 192.168.0.111 [ 89.331622] BUG: sleeping function called from invalid context at mm/slab.h:420 [ 89.339002] in_atomic(): 1, irqs_disabled(): 0, pid: 1035, name: ifconfig [ 89.345799] 2 locks held by ifconfig/1035: [ 89.349908] #0: (rtnl_mutex){+.+.}, at: [<(ptrval)>] devinet_ioctl+0xc0/0x8a0 [ 89.357258] #1: (_xmit_ETHER){+...}, at: [<(ptrval)>] __dev_mc_add+0x28/0x80 [ 89.364520] CPU: 1 PID: 1035 Comm: ifconfig Not tainted 4.16.0-rc3-dirty #8 [ 89.371464] Call Trace: [ 89.373908] [e959db60] [c066f948] dump_stack+0xa4/0xfc (unreliable) [ 89.380177] [e959db80] [c00671d8] ___might_sleep+0x248/0x280 [ 89.385833] [e959dba0] [c01aec34] kmem_cache_alloc_trace+0x174/0x320 [ 89.392179] [e959dbd0] [c04ab920] dtsec_add_hash_mac_address+0x130/0x240 [ 89.398874] [e959dc00] [c04a9d74] set_multi+0x174/0x1b0 [ 89.404093] [e959dc30] [c04afb68] dpaa_set_rx_mode+0x68/0xe0 [ 89.409745] [e959dc40] [c057baf8] __dev_mc_add+0x58/0x80 [ 89.415052] [e959dc60] [c060fd64] igmp_group_added+0x164/0x190 [ 89.420878] [e959dca0] [c060ffa8] ip_mc_inc_group+0x218/0x460 [ 89.426617] [e959dce0] [c06120fc] ip_mc_up+0x3c/0x190 [ 89.431662] [e959dd10] [c0607270] inetdev_event+0x250/0x620 [ 89.437227] [e959dd50] [c005f190] notifier_call_chain+0x80/0xf0 [ 89.443138] [e959dd80] [c0573a74] __dev_notify_flags+0x54/0xf0 [ 89.448964] [e959dda0] [c05743f8] dev_change_flags+0x48/0x60 [ 89.454615] [e959ddc0] [c0606744] devinet_ioctl+0x544/0x8a0 [ 89.460180] [e959de10] [c060987c] inet_ioctl+0x9c/0x1f0 [ 89.465400] [e959de80] [c05479a8] sock_ioctl+0x168/0x460 [ 89.470708] [e959ded0] [c01cf3ec] do_vfs_ioctl+0xac/0x8c0 [ 89.476099] [e959df20] [c01cfc40] SyS_ioctl+0x40/0xc0 [ 89.481147] [e959df40] [c0011318] ret_from_syscall+0x0/0x3c [ 89.486715] --- interrupt: c01 at 0x1006943c [ 89.486715] LR = 0x100c45ec Signed-off-by: Denis Kirjanov <[email protected]> Acked-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>

When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a HARDIRQ-safe->HARDIRQ-unsafe deadlock: ================================ WARNING: inconsistent lock state 4.16.0-rc4+ #1 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. takes: __schedule+0xbe/0xaf0 {IN-HARDIRQ-W} state was registered at: _raw_spin_lock+0x2a/0x40 scheduler_tick+0x47/0xf0 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rq->lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by rcu_torture_rea/724: rcu_torture_read_lock+0x0/0x70 stack backtrace: CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: lock_acquire+0x90/0x200 ? __schedule+0xbe/0xaf0 _raw_spin_lock+0x2a/0x40 ? __schedule+0xbe/0xaf0 __schedule+0xbe/0xaf0 preempt_schedule_irq+0x2f/0x60 retint_kernel+0x1b/0x2d RIP: 0010:rcu_read_unlock_special+0x0/0x680 ? rcu_torture_read_unlock+0x60/0x60 __rcu_read_unlock+0x64/0x70 rcu_torture_read_unlock+0x17/0x60 rcu_torture_reader+0x275/0x450 ? rcutorture_booster_init+0x110/0x110 ? rcu_torture_stall+0x230/0x230 ? kthread+0x10e/0x130 kthread+0x10e/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ? call_usermodehelper_exec_async+0x11a/0x150 ret_from_fork+0x3a/0x50 This happens with the following even sequence: preempt_schedule_irq(); local_irq_enable(); __schedule(): local_irq_disable(); // irq off ... rcu_note_context_switch(): rcu_note_preempt_context_switch(): rcu_read_unlock_special(): local_irq_save(flags); ... raw_spin_unlock_irqrestore(...,flags); // irq remains off rt_mutex_futex_unlock(): raw_spin_lock_irq(); ... raw_spin_unlock_irq(); // accidentally set irq on <return to __schedule()> rq_lock(): raw_spin_lock(); // acquiring rq->lock with irq on which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause deadlocks in scheduler code. This problem was introduced by commit 02a7c23 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints"). That brought the user of rt_mutex_futex_unlock() with irq off. To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with *lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock() with irq off. Fixes: 02a7c23 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints") Signed-off-by: Boqun Feng <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Josh Triplett <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: "Paul E . McKenney" <[email protected]> Link: https://lkml.kernel.org/r/[email protected]

Commit b92df1d ("mm: page_alloc: skip over regions of invalid pfns where possible") introduced a bug where move_freepages() triggers a VM_BUG_ON() on uninitialized page structure due to pageblock alignment. To fix this, simply align the skipped pfns in memmap_init_zone() the same way as in move_freepages_block(). Seen in one of the RHEL reports: crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1 kernel BUG at mm/page_alloc.c:1389! invalid opcode: 0000 [#1] SMP -- RIP: 0010:[<ffffffff8118833e>] [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP: 0018:ffff88054d727688 EFLAGS: 00010087 -- Call Trace: [<ffffffff811883b3>] move_freepages_block+0x73/0x80 [<ffffffff81189e63>] __rmqueue+0x263/0x460 [<ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0 [<ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420 -- RIP [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP <ffff88054d727688> crash> page_init_bug -v | grep RAM <struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB) <struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB) <struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB) <struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB) <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB) crash> page_init_bug | head -6 <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 <struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0> <struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095 <struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 BUG, zones differ! Note that this range follows two not populated sections 68000000-77ffffff in this zone. 7b788000-7b7fffff is the first one after a gap. This makes memmap_init_zone() skip all the pfns up to the beginning of this range. But this range is not pageblock (2M) aligned. In fact no range has to be. crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001ed7fc0 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 0 0 <<<< ffffea0001ede1c0 7b787000 0 0 0 0 ffffea0001ede200 7b788000 0 0 1 1fffff00000000 Top part of page flags should contain nodeid and zonenr, which is not the case for page ffffea0001ed8000 here (<<<<). crash> log | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded20 fffea0001edffc0 crash> bt -r | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded00 fffea0001eded20 fffea0001edffc0 Initialization of the whole beginning of the section is skipped up to the start of the range due to the commit b92df1d. Now any code calling move_freepages_block() (like reusing the page from a freelist as in this example) with a page from the beginning of the range will get the page rounded down to start_page ffffea0001ed8000 and passed to move_freepages() which crashes on assertion getting wrong zonenr. > VM_BUG_ON(page_zone(start_page) != page_zone(end_page)); Note, page_zone() derives the zone from page flags here. From similar machine before commit b92df1d: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffff73941e00000 78000000 0 0 1 1fffff00000000 fffff73941ed7fc0 7b5ff000 0 0 1 1fffff00000000 fffff73941ed8000 7b600000 0 0 1 1fffff00000000 fffff73941edff80 7b7fe000 0 0 1 1fffff00000000 fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1 1fffff00020068 uptodate,lru,active,mappedtodisk All the pages since the beginning of the section are initialized. move_freepages()' not gonna blow up. The same machine with this fix applied: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001e00000 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 1 1fffff00000000 ffffea0001edff80 7b7fe000 0 0 1 1fffff00000000 ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2 1fffff00020068 uptodate,lru,active,mappedtodisk At least the bare minimum of pages is initialized preventing the crash as well. Customers started to report this as soon as 7.4 (where b92df1d was merged in RHEL) was released. I remember reports from September/October-ish times. It's not easily reproduced and happens on a handful of machines only. I guess that's why. But that does not make it less serious, I think. Though there actually is a report here: https://bugzilla.kernel.org/show_bug.cgi?id=196443 And there are reports for Fedora from July: https://bugzilla.redhat.com/show_bug.cgi?id=1473242 and CentOS: https://bugs.centos.org/view.php?id=13964 and we internally track several dozens reports for RHEL bug https://bugzilla.redhat.com/show_bug.cgi?id=1525121 Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com Fixes: b92df1d ("mm: page_alloc: skip over regions of invalid pfns where possible") Signed-off-by: Daniel Vacek <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Paul Burton <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <[email protected]> Cc: <[email protected]> Reported-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>

The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <[email protected]> Fixes: c8f6a36 ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Sean Hefty <[email protected]> Signed-off-by: Doug Ledford <[email protected]>

Under memory pressure, we sometimes observe the following crash: [ 5694.832838] ------------[ cut here ]------------ [ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100) [ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80 [ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1 [ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021 [ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80 [ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7 [ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246 [ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000 [ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480 [ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370 [ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002 [ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240 [ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000 [ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0 [ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5695.207197] PKRU: 55555554 [ 5695.212602] Call Trace: [ 5695.217486] <TASK> [ 5695.221674] zs_map_object+0x91/0x270 [ 5695.229000] zswap_frontswap_store+0x33d/0x870 [ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0 [ 5695.245899] __frontswap_store+0x51/0xb0 [ 5695.253742] swap_writepage+0x3c/0x60 [ 5695.261063] shrink_page_list+0x738/0x1230 [ 5695.269255] shrink_lruvec+0x5ec/0xcd0 [ 5695.276749] ? shrink_slab+0x187/0x5f0 [ 5695.284240] ? mem_cgroup_iter+0x6e/0x120 [ 5695.292255] shrink_node+0x293/0x7b0 [ 5695.299402] do_try_to_free_pages+0xea/0x550 [ 5695.307940] try_to_free_pages+0x19a/0x490 [ 5695.316126] __folio_alloc+0x19ff/0x3e40 [ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0 [ 5695.332681] ? walk_component+0x2a8/0xb50 [ 5695.340697] ? generic_permission+0xda/0x2a0 [ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0 [ 5695.357940] ? walk_component+0x2a8/0xb50 [ 5695.365955] vma_alloc_folio+0x10e/0x570 [ 5695.373796] ? walk_component+0x52/0xb50 [ 5695.381634] wp_page_copy+0x38c/0xc10 [ 5695.388953] ? filename_lookup+0x378/0xbc0 [ 5695.397140] handle_mm_fault+0x87f/0x1800 [ 5695.405157] do_user_addr_fault+0x1bd/0x570 [ 5695.413520] exc_page_fault+0x5d/0x110 [ 5695.421017] asm_exc_page_fault+0x22/0x30 After some investigation, I have found the following issue: unlike other zswap backends, zsmalloc performs the LRU list update at the object mapping time, rather than when the slot for the object is allocated. This deviation was discussed and agreed upon during the review process of the zsmalloc writeback patch series: https://lore.kernel.org/lkml/[email protected]/ Unfortunately, this introduces a subtle bug that occurs when there is a concurrent store and reclaim, which interleave as follows: zswap_frontswap_store() shrink_worker() zs_malloc() zs_zpool_shrink() spin_lock(&pool->lock) zs_reclaim_page() zspage = find_get_zspage() spin_unlock(&pool->lock) spin_lock(&pool->lock) zspage = list_first_entry(&pool->lru) list_del(&zspage->lru) zspage->lru.next = LIST_POISON1 zspage->lru.prev = LIST_POISON2 spin_unlock(&pool->lock) zs_map_object() spin_lock(&pool->lock) if (!list_empty(&zspage->lru)) list_del(&zspage->lru) CHECK_DATA_CORRUPTION(next == LIST_POISON1) /* BOOM */ With the current upstream code, this issue rarely happens. zswap only triggers writeback when the pool is already full, at which point all further store attempts are short-circuited. This creates an implicit pseudo-serialization between reclaim and store. I am working on a new zswap shrinking mechanism, which makes interleaving reclaim and store more likely, exposing this bug. zbud and z3fold do not have this problem, because they perform the LRU list update in the alloc function, while still holding the pool's lock. This patch fixes the aforementioned bug by moving the LRU update back to zs_malloc(), analogous to zbud and z3fold. Link: https://lkml.kernel.org/r/[email protected] Fixes: 64f768c ("zsmalloc: add a LRU to zs_pool to keep track of zspages in LRU order") Signed-off-by: Nhat Pham <[email protected]> Suggested-by: Johannes Weiner <[email protected]> Acked-by: Johannes Weiner <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Acked-by: Minchan Kim <[email protected]> Cc: Dan Streetman <[email protected]> Cc: Nitin Gupta <[email protected]> Cc: Seth Jennings <[email protected]> Cc: Vitaly Wool <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

…ting Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d5 ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>

After commit 27a2195 ("power: supply: core: auto-exposure of simple-battery data") we call power_supply_get_battery_info() in __power_supply_register(), but it causes test_battery crash with NULL pointer: [ 7.524846] __power_supply_register: Expected proper parent device for 'test_battery' [ 7.524856] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000278, era == 9000000002fb279c, ra == 9000000003173434 [ 7.524862] Oops[#1]: [ 7.524866] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.3.0+ #524 [ 7.524870] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022 [ 7.524872] pc 9000000002fb279c ra 9000000003173434 tp 90000001001f0000 sp 90000001001f3c00 [ 7.524875] a0 0000000000000000 a1 0000000000000000 a2 0000000000000000 a3 9000000004553e13 [ 7.524878] a4 9000000004553e16 a5 ffffffffffffffff a6 9000000003fd0948 a7 0000000000000030 [ 7.524881] t0 9000000003173434 t1 90000000035e2c00 t2 0000000000000001 t3 00000000fffff2b0 [ 7.524883] t4 0000000000000007 t5 fffffffffffffffe t6 0000000000000000 t7 0000000000000010 [ 7.524886] t8 00000000000000b4 u0 00000001c0840c76 s9 0000000000000000 s0 0000000000000000 [ 7.524889] s1 900000000370c458 s2 0000000000000001 s3 9000000101f81000 s4 9000000101f81038 [ 7.524891] s5 9000000101f813a0 s6 900000000370c398 s7 9000000003eebd18 s8 90000000037c0070 [ 7.524894] ra: 9000000003173434 power_supply_get_battery_info+0xe4/0x710 [ 7.591224] ERA: 9000000002fb279c __dev_fwnode+0x8/0x20 [ 7.853583] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 7.859740] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 7.864073] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 7.868839] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 7.873430] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 7.878884] BADV: 0000000000000278 [ 7.882346] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 7.888056] Modules linked in: [ 7.891088] Process swapper/0 (pid: 1, threadinfo=0000000091357ee8, task=00000000313d98cb) [ 7.899307] Stack : 00000000000000b4 900000000279aca8 0000000000000001 0000000000000000 [ 7.907274] 0000000000000049 0000000000000408 9000000100008c00 90000000035b6370 [ 7.915238] 900000000b801080 90000000029a440c 9000000003eb4680 9000000003eb4680 [ 7.923202] 9000000101f81038 900000000357cdcc 0000000000000001 900000000370c458 [ 7.931166] 9000000101f81000 90000000037c0070 9000000003eebd18 900000000370c398 [ 7.939131] 90000000045f4530 9000000101f81038 0000000000000000 0000000000000001 [ 7.947095] 900000000370c458 9000000101f81000 0000000000000000 9000000003173e64 [ 7.955059] 0000000000000026 9000000003de3880 9000000100562040 900000000357e07c [ 7.963023] 000000000000026f 0000000000000001 90000001001f3d68 fffffffffffffff5 [ 7.970987] 90000000036d2ca8 90000000027429d8 90000000037c0030 0000000000000001 [ 7.978951] ... [ 7.981379] Call Trace: [ 7.981382] [<9000000002fb279c>] __dev_fwnode+0x8/0x20 [ 7.988916] [<9000000003173434>] power_supply_get_battery_info+0xe4/0x710 [ 7.995666] [<9000000003173e64>] __power_supply_register+0x404/0x580 [ 8.001984] [<900000000379d368>] test_power_init+0x6c/0x124 [ 8.007527] [<90000000026e08f8>] do_one_initcall+0x58/0x1ec [ 8.013066] [<9000000003761614>] kernel_init_freeable+0x290/0x310 [ 8.019127] [<90000000035b40e8>] kernel_init+0x24/0x11c [ 8.024324] [<90000000026e2048>] ret_from_kernel_thread+0xc/0xa4 [ 8.030295] [ 8.031769] Code: 4c000020 0015002c 03400000 <28c9e08c> 40000d80 02c06184 4c000020 28ca0084 4c000020 Root cause: psy->dev.parent is NULL in power_supply_get_battery_info(), so change the else branch to be 'else if (psy->dev.parent)' and return -ENOENT if psy->dev.parent is NULL. Fixes: 27a2195 ("power: supply: core: auto-exposure of simple-battery data") Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>

Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: [email protected] # 4.14+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: [email protected] Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Tudor Ambarus <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration. Fixes: e49300a ("net/smc: add listen processing for SMC-Rv2") Link: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Wen Gu <[email protected]> Reviewed-by: Tony Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc8 ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c241 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. Fixes: c0fd210 ("Revert "android: binder: stop saving a pointer to the VMA"") Fixes: dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <[email protected]> Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver Cc: <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Yang Shi <[email protected]> Cc: Liam Howlett <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Acked-by: Todd Kjos <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Commit 1e8fed8 ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") removed the limits on the possible values for ARCH_FORCE_MAX_ORDER. However removing the ranges entirely causes some common work flows to break. For example building a defconfig (which uses 64K pages), changing the page size to 4K, and rebuilding used to work, because ARCH_FORCE_MAX_ORDER would be clamped to 12 by the ranges. With the ranges removed it creates a kernel that builds but crashes at boot: kernel BUG at mm/huge_memory.c:470! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP hugepage_init+0x9c/0x278 LR do_one_initcall+0x80/0x320 Call Trace: do_one_initcall+0x80/0x320 kernel_init_freeable+0x304/0x3ac kernel_init+0x30/0x1a0 ret_from_kernel_user_thread+0x14/0x1c The reasoning for removing the ranges was that some of the values were too large. So take that into account and limit the maximums to 10 which is the default max, except for the 4K case which uses 12. Fixes: 1e8fed8 ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]

In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dd ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Shay Drory <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 6702782 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Whenever a shutdown is invoked, free irqs only and keep mlx5_irq synthetic wrapper intact in order to avoid use-after-free on system shutdown. for example: ================================================================== BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80 Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608 CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? _find_first_bit+0x66/0x80 kasan_report+0xad/0x130 ? _find_first_bit+0x66/0x80 _find_first_bit+0x66/0x80 mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 1: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 irq_pool_free+0x138/0x200 [mlx5_core] mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core] mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core] shutdown+0x194/0x1aa [mlx5_core] pci_device_shutdown+0x75/0x120 device_shutdown+0x35c/0x620 kernel_restart+0x60/0xa0 __do_sys_reboot+0x1cb/0x2c0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x4b/0xb5 The buggy address belongs to the object at ffff88823fc0d300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 24 bytes inside of 192-byte region [ffff88823fc0d300, ffff88823fc0d3c0) The buggy address belongs to the physical page: page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x23fc0c head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== general protection fault, probably for non-canonical address 0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67] CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:__alloc_pages+0x141/0x5c0 Call Trace: <TASK> ? sysvec_apic_timer_interrupt+0xa0/0xc0 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0 ? _raw_spin_unlock_irqrestore+0x3d/0x80 __kmalloc_large_node+0x80/0x120 ? kvmalloc_node+0x4e/0x170 __kmalloc_node+0xd4/0x150 kvmalloc_node+0x4e/0x170 mlx5e_open_channels+0x631/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:__alloc_pages+0x141/0x5c0 Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea 03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02 00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89 RSP: 0018:ffff888251f0f438 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000 RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60 RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003 R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380 FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---] Reported-by: Frederick Lawler <[email protected]> Link: https://lore.kernel.org/netdev/[email protected] Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

The read_skb hook calls consume_skb() now, but this means that if the recv_actor program wants to use the skb it needs to inc the ref cnt so that the consume_skb() doesn't kfree the sk_buff. This is problematic because in some error cases under memory pressure we may need to linearize the sk_buff from sk_psock_skb_ingress_enqueue(). Then we get this, skb_linearize() __pskb_pull_tail() pskb_expand_head() BUG_ON(skb_shared(skb)) Because we incremented users refcnt from sk_psock_verdict_recv() we hit the bug on with refcnt > 1 and trip it. To fix lets simply pass ownership of the sk_buff through the skb_read call. Then we can drop the consume from read_skb handlers and assume the verdict recv does any required kfree. Bug found while testing in our CI which runs in VMs that hit memory constraints rather regularly. William tested TCP read_skb handlers. [ 106.536188] ------------[ cut here ]------------ [ 106.536197] kernel BUG at net/core/skbuff.c:1693! [ 106.536479] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 106.536726] CPU: 3 PID: 1495 Comm: curl Not tainted 5.19.0-rc5 #1 [ 106.537023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.16.0-1 04/01/2014 [ 106.537467] RIP: 0010:pskb_expand_head+0x269/0x330 [ 106.538585] RSP: 0018:ffffc90000138b68 EFLAGS: 00010202 [ 106.538839] RAX: 000000000000003f RBX: ffff8881048940e8 RCX: 0000000000000a20 [ 106.539186] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff8881048940e8 [ 106.539529] RBP: ffffc90000138be8 R08: 00000000e161fd1a R09: 0000000000000000 [ 106.539877] R10: 0000000000000018 R11: 0000000000000000 R12: ffff8881048940e8 [ 106.540222] R13: 0000000000000003 R14: 0000000000000000 R15: ffff8881048940e8 [ 106.540568] FS: 00007f277dde9f00(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 106.540954] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.541227] CR2: 00007f277eeede64 CR3: 000000000ad3e000 CR4: 00000000000006e0 [ 106.541569] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.541915] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.542255] Call Trace: [ 106.542383] <IRQ> [ 106.542487] __pskb_pull_tail+0x4b/0x3e0 [ 106.542681] skb_ensure_writable+0x85/0xa0 [ 106.542882] sk_skb_pull_data+0x18/0x20 [ 106.543084] bpf_prog_b517a65a242018b0_bpf_skskb_http_verdict+0x3a9/0x4aa9 [ 106.543536] ? migrate_disable+0x66/0x80 [ 106.543871] sk_psock_verdict_recv+0xe2/0x310 [ 106.544258] ? sk_psock_write_space+0x1f0/0x1f0 [ 106.544561] tcp_read_skb+0x7b/0x120 [ 106.544740] tcp_data_queue+0x904/0xee0 [ 106.544931] tcp_rcv_established+0x212/0x7c0 [ 106.545142] tcp_v4_do_rcv+0x174/0x2a0 [ 106.545326] tcp_v4_rcv+0xe70/0xf60 [ 106.545500] ip_protocol_deliver_rcu+0x48/0x290 [ 106.545744] ip_local_deliver_finish+0xa7/0x150 Fixes: 04919be ("tcp: Introduce tcp_read_skb()") Reported-by: William Findlay <[email protected]> Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: William Findlay <[email protected]> Reviewed-by: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe1 ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbad ("udp: use it's own memory accounting schema") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Previously the Q-counters initialization assumed that the vport Q-counters structures and the normal Q-counters structures are identical in size, and hence when a Q-counter was added to normal Q-counters structure but not to the vport Q-counters struct it would lead to that counter name being NULL in switchdev mode, which could cause the kernel crash below. Currently break the dependency between those two structure and always use the appropriate struct size, in order to remove the assumption that both structure sizes are equal. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 20c64a067 P4D 20c64a067 PUD 20152b067 PMD 0 Oops: 0000 [#1] SMP CPU: 19 PID: 11717 Comm: devlink Tainted: G OE 6.2.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:strlen+0x0/0x20 Code: 66 2e 0f 1f 84 00 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 48 89 f8 74 10 48 83 c7 01 80 3f 00 75 f7 48 29 c7 48 89 RSP: 0018:ffffc9000318b618 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000002c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888211918110 R09: ffff888211918000 R10: 000000000000001e R11: ffff888211918000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8881038ec250 FS: 00007fa53342fe80(0000) GS:ffff88885fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000002042b2003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> kernfs_name_hash+0x12/0x80 kernfs_find_ns+0x35/0xb0 kernfs_remove_by_name_ns+0x46/0xc0 remove_files.isra.1+0x30/0x70 internal_create_group+0x253/0x380 internal_create_groups.part.4+0x3e/0xa0 setup_port+0x27a/0x8c0 [ib_core] ib_setup_port_attrs+0x9d/0x300 [ib_core] ib_register_device+0x48e/0x550 [ib_core] __mlx5_ib_add+0x2b/0x80 [mlx5_ib] mlx5_ib_vport_rep_load+0x141/0x360 [mlx5_ib] mlx5_esw_offloads_rep_load+0x48/0xa0 [mlx5_core] esw_offloads_enable+0x41e/0xd10 [mlx5_core] mlx5_eswitch_enable_locked+0x1e3/0x340 [mlx5_core] ? __cond_resched+0x15/0x30 mlx5_devlink_eswitch_mode_set+0x204/0x3c0 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0x8d/0x100 genl_family_rcv_msg_doit.isra.19+0xea/0x110 genl_rcv_msg+0x19b/0x290 ? devlink_nl_cmd_region_read_dumpit+0x760/0x760 ? devlink_nl_cmd_port_param_get_doit+0x30/0x30 ? devlink_put+0x50/0x50 ? genl_get_cmd_both+0x60/0x60 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1be/0x2a0 netlink_sendmsg+0x361/0x4d0 sock_sendmsg+0x30/0x40 __sys_sendto+0x11a/0x150 ? handle_mm_fault+0x101/0x2b0 ? do_user_addr_fault+0x21d/0x720 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fa533611cba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffdb6a898a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000daab00 RCX: 00007fa533611cba RDX: 0000000000000038 RSI: 0000000000daab00 RDI: 0000000000000003 RBP: 0000000000daa910 R08: 00007fa533822000 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) mlx_compat(OE) mlxfw(OE) memtrack(OE) pci_hyperv_intf nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat dns_resolver nf_nat br_netfilter nfs bridge stp llc lockd grace fscache netfs rfkill overlay iTCO_wdt iTCO_vendor_support kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel i2c_i801 sunrpc lpc_ich sha512_ssse3 pcspkr i2c_smbus mfd_core drm sch_fq_codel i2c_core ip_tables fuse crc32c_intel serio_raw virtio_net net_failover failover [last unloaded: mlxfw] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x0/0x20 Code: 66 2e 0f 1f 84 00 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 48 89 f8 74 10 48 83 c7 01 80 3f 00 75 f7 48 29 c7 48 89 RSP: 0018:ffffc9000318b618 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000002c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888211918110 R09: ffff888211918000 R10: 000000000000001e R11: ffff888211918000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8881038ec250 FS: 00007fa53342fe80(0000) GS:ffff88885fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000002042b2003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: d22467a ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <[email protected]> Reviewed-by: Mark Zhang <[email protected]> Link: https://lore.kernel.org/r/016777b7f16eb6bb178999ff59097d0c0f91f68a.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]>

- When a iSER session is released, ib_isert module is taking a mutex lock and releasing all pending connections. As part of this, ib_isert is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending CM events to CMA handler of ib_isert. This handler is taking same mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm modules. - For fix, created local list of pending connections and release the connection outside of mutex lock. Calltrace: --------- [ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds. [ 1229.791416] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791419] task:kworker/10:1 state:D stack: 0 pid: 642 ppid: 2 flags:0x80004000 [ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm] [ 1229.791436] Call Trace: [ 1229.791438] __schedule+0x2d1/0x830 [ 1229.791445] ? select_idle_sibling+0x23/0x6f0 [ 1229.791449] schedule+0x35/0xa0 [ 1229.791451] schedule_preempt_disabled+0xa/0x10 [ 1229.791453] __mutex_lock.isra.7+0x310/0x420 [ 1229.791456] ? select_task_rq_fair+0x351/0x990 [ 1229.791459] isert_cma_handler+0x224/0x330 [ib_isert] [ 1229.791463] ? ttwu_queue_wakelist+0x159/0x170 [ 1229.791466] cma_cm_event_handler+0x25/0xd0 [rdma_cm] [ 1229.791474] cma_ib_handler+0xa7/0x2e0 [rdma_cm] [ 1229.791478] cm_process_work+0x22/0xf0 [ib_cm] [ 1229.791483] cm_work_handler+0xf4/0xf30 [ib_cm] [ 1229.791487] ? move_linked_works+0x6e/0xa0 [ 1229.791490] process_one_work+0x1a7/0x360 [ 1229.791491] ? create_worker+0x1a0/0x1a0 [ 1229.791493] worker_thread+0x30/0x390 [ 1229.791494] ? create_worker+0x1a0/0x1a0 [ 1229.791495] kthread+0x10a/0x120 [ 1229.791497] ? set_kthread_struct+0x40/0x40 [ 1229.791499] ret_from_fork+0x1f/0x40 [ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds. [ 1229.791740] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791742] task:targetcli state:D stack: 0 pid:28666 ppid: 5510 flags:0x00004080 [ 1229.791743] Call Trace: [ 1229.791744] __schedule+0x2d1/0x830 [ 1229.791746] schedule+0x35/0xa0 [ 1229.791748] schedule_preempt_disabled+0xa/0x10 [ 1229.791749] __mutex_lock.isra.7+0x310/0x420 [ 1229.791751] rdma_destroy_id+0x15/0x20 [rdma_cm] [ 1229.791755] isert_connect_release+0x115/0x130 [ib_isert] [ 1229.791757] isert_free_np+0x87/0x140 [ib_isert] [ 1229.791761] iscsit_del_np+0x74/0x120 [iscsi_target_mod] [ 1229.791776] lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod] [ 1229.791784] configfs_write_file+0xb2/0x110 [ 1229.791788] vfs_write+0xa5/0x1a0 [ 1229.791792] ksys_write+0x4f/0xb0 [ 1229.791794] do_syscall_64+0x5b/0x1a0 [ 1229.791798] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: bd37922 ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Saravanan Vajravel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>

[BUG] Syzbot reports a reproducible ASSERT() when using rescue=usebackuproot mount option on a corrupted fs. The full report can be found here: https://syzkaller.appspot.com/bug?extid=c4614eae20a166c25bf0 BTRFS error (device loop0: state C): failed to load root csum assertion failed: !tmp, in fs/btrfs/disk-io.c:1103 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3664! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3608 Comm: syz-executor356 Not tainted 6.0.0-rc7-syzkaller-00029-g3800a713b607 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 RIP: 0010:assertfail+0x1a/0x1c fs/btrfs/ctree.h:3663 RSP: 0018:ffffc90003aaf250 EFLAGS: 00010246 RAX: 0000000000000032 RBX: 0000000000000000 RCX: f21c13f886638400 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff888021c640a0 R08: ffffffff816bd38d R09: ffffed10173667f1 R10: ffffed10173667f1 R11: 1ffff110173667f0 R12: dffffc0000000000 R13: ffff8880229c21f7 R14: ffff888021c64060 R15: ffff8880226c0000 FS: 0000555556a73300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a2637d7a00 CR3: 00000000709c4000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_global_root_insert+0x1a7/0x1b0 fs/btrfs/disk-io.c:1103 load_global_roots_objectid+0x482/0x8c0 fs/btrfs/disk-io.c:2467 load_global_roots fs/btrfs/disk-io.c:2501 [inline] btrfs_read_roots fs/btrfs/disk-io.c:2528 [inline] init_tree_roots+0xccb/0x203c fs/btrfs/disk-io.c:2939 open_ctree+0x1e53/0x33df fs/btrfs/disk-io.c:3574 btrfs_fill_super+0x1c6/0x2d0 fs/btrfs/super.c:1456 btrfs_mount_root+0x885/0x9a0 fs/btrfs/super.c:1824 legacy_get_tree+0xea/0x180 fs/fs_context.c:610 vfs_get_tree+0x88/0x270 fs/super.c:1530 fc_mount fs/namespace.c:1043 [inline] vfs_kern_mount+0xc9/0x160 fs/namespace.c:1073 btrfs_mount+0x3d3/0xbb0 fs/btrfs/super.c:1884 [CAUSE] Since the introduction of global roots, we handle csum/extent/free-space-tree roots as global roots, even if no extent-tree-v2 feature is enabled. So for regular csum/extent/fst roots, we load them into fs_info::global_root_tree rb tree. And we should not expect any conflicts in that rb tree, thus we have an ASSERT() inside btrfs_global_root_insert(). But rescue=usebackuproot can break the assumption, as we will try to load those trees again and again as long as we have bad roots and have backup roots slot remaining. So in that case we can have conflicting roots in the rb tree, and triggering the ASSERT() crash. [FIX] We can safely remove that ASSERT(), as the caller will properly put the offending root. To make further debugging easier, also add two explicit error messages: - Error message for conflicting global roots - Error message when using backup roots slot Reported-by: [email protected] Fixes: abed4aa ("btrfs: track the csum, extent, and free space trees in a rb tree") CC: [email protected] # 6.1+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

As clk_core_populate_parent_map() checks clk_init_data.num_parents first, and checks clk_init_data.parent_names[] before clk_init_data.parent_data[] and clk_init_data.parent_hws[]. Therefore the clk_init_data structure needs to be explicitly initialised to prevent an unexpected crash if clk_init_data.parent_names[] is a random value. CPU 0 Unable to handle kernel paging request at virtual address 0000000000000dc0, era == 9000000002986290, ra == 900000000298624c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #4582 pc 9000000002986290 ra 900000000298624c tp 9000000100094000 sp 9000000100097a60 a0 9000000104541e00 a1 0000000000000000 a2 0000000000000dc0 a3 0000000000000001 a4 90000001000979f0 a5 90000001800977d7 a6 0000000000000000 a7 900000000362a000 t0 90000000034f3548 t1 6f8c2a9cb5ab5f64 t2 0000000000011340 t3 90000000031cf5b0 t4 0000000000000dc0 t5 0000000000000004 t6 0000000000011300 t7 9000000104541e40 t8 000000000005a4f8 u0 9000000104541e00 s9 9000000104541e00 s0 9000000104bc4700 s1 9000000104541da8 s2 0000000000000001 s3 900000000356f9d8 s4 ffffffffffffffff s5 0000000000000000 s6 0000000000000dc0 s7 90000000030d0a88 s8 0000000000000000 ra: 900000000298624c __clk_register+0x228/0x84c ERA: 9000000002986290 __clk_register+0x26c/0x84c CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000dc0 PRID: 0014a000 (Loongson-64bit, ) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 90000000031c1810 90000000030d0a88 900000000325bac0 90000000034f3548 90000001002ab410 9000000104541e00 0000000000000dc0 9000000003150098 90000000031c1810 90000000031a0460 900000000362a000 90000001002ab410 900000000362a000 9000000104541da8 9000000104541de8 90000001002ab410 900000000362a000 9000000002986a68 90000000034f3ed8 90000000030d0aa8 9000000104541da8 900000000298d3b8 90000000031c1810 0000000000000000 90000000034f3ed8 90000000030d0aa8 0000000000000dc0 90000000030d0a88 90000001002ab410 900000000298d401 0000000000000000 6f8c2a9cb5ab5f64 90000000034f4000 90000000030d0a88 9000000003a48a58 90000001002ab410 9000000104bd81a8 900000000298d484 9000000100020260 0000000000000000 ... Call Trace: [<9000000002986290>] __clk_register+0x26c/0x84c [<9000000002986a68>] devm_clk_hw_register+0x5c/0xe0 [<900000000298d3b8>] loongson2_clk_register.constprop.0+0xdc/0x10c [<900000000298d484>] loongson2_clk_probe+0x9c/0x4ac [<9000000002a4eba4>] platform_probe+0x68/0xc8 [<9000000002a4bf80>] really_probe+0xbc/0x2f0 [<9000000002a4c23c>] __driver_probe_device+0x88/0x128 [<9000000002a4c318>] driver_probe_device+0x3c/0x11c [<9000000002a4c5dc>] __driver_attach+0x98/0x18c [<9000000002a49ca0>] bus_for_each_dev+0x80/0xe0 [<9000000002a4b0dc>] bus_add_driver+0xfc/0x1ec [<9000000002a4d4a8>] driver_register+0x68/0x134 [<90000000020f0110>] do_one_initcall+0x50/0x188 [<9000000003150f00>] kernel_init_freeable+0x224/0x294 [<90000000030240fc>] kernel_init+0x20/0x110 [<90000000020f1568>] ret_from_kernel_thread+0xc/0xa4 Fixes: acc0ccf ("clk: clk-loongson2: add clock controller driver support") Cc: [email protected] Cc: Yinbo Zhu <[email protected]> Signed-off-by: Binbin Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>

Disable the modesetting pipeline before release the radeon's fbdev client. Fixes the following error: [ 17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod [ 17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1 [ 17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022 [ 17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff [ 17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202 [ 17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000 [ 17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0 [ 17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08 [ 17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78 [ 17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108 [ 17.217460] FS: 00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000 [ 17.217463] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0 [ 17.217466] PKRU: 55555554 [ 17.217468] Call Trace: [ 17.217470] <TASK> [ 17.217472] ? __warn+0x97/0x160 [ 17.217476] ? ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217481] ? report_bug+0x1ec/0x200 [ 17.217487] ? handle_bug+0x3c/0x70 [ 17.217490] ? exc_invalid_op+0x1f/0x90 [ 17.217493] ? preempt_count_sub+0xb5/0x100 [ 17.217496] ? asm_exc_invalid_op+0x16/0x20 [ 17.217500] ? ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217505] ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm] [ 17.217511] radeon_bo_unref+0x1a/0x30 [radeon] [ 17.217547] radeon_gem_object_free+0x20/0x30 [radeon] [ 17.217579] radeon_fbdev_fb_destroy+0x57/0x90 [radeon] [ 17.217616] unregister_framebuffer+0x72/0x110 [ 17.217620] drm_client_dev_unregister+0x6d/0xe0 [ 17.217623] drm_dev_unregister+0x2e/0x90 [ 17.217626] drm_put_dev+0x26/0x90 [ 17.217628] pci_device_remove+0x44/0xc0 [ 17.217631] really_probe+0x257/0x340 [ 17.217635] __driver_probe_device+0x73/0x120 [ 17.217638] driver_probe_device+0x2c/0xb0 [ 17.217641] __driver_attach+0xa0/0x150 [ 17.217643] ? __pfx___driver_attach+0x10/0x10 [ 17.217646] bus_for_each_dev+0x67/0xa0 [ 17.217649] bus_add_driver+0x10e/0x210 [ 17.217651] driver_register+0x5c/0x120 [ 17.217653] ? __pfx_radeon_module_init+0x10/0x10 [radeon] [ 17.217681] do_one_initcall+0x44/0x220 [ 17.217684] ? kmalloc_trace+0x37/0xc0 [ 17.217688] do_init_module+0x64/0x240 [ 17.217691] __do_sys_finit_module+0xb2/0x100 [ 17.217694] do_syscall_64+0x3b/0x90 [ 17.217697] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 17.217700] RIP: 0033:0x7f319feaa5a9 [ 17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48 [ 17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9 [ 17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018 [ 17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860 [ 17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000 [ 17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899 [ 17.217718] </TASK> [ 17.217719] ---[ end trace 0000000000000000 ]--- The buffer object backing the fbdev emulation got pinned twice: by the fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting code when the framebuffer got displayed. It only got unpinned once by the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO- release function complains about the pin counter. Forcing the outputs off also undoes the modesettings pin increment. Tested-by: Borislav Petkov (AMD) <[email protected]> Reported-by: Borislav Petkov <[email protected]> Closes: https://lore.kernel.org/dri-devel/20230603174814.GCZHt83pN+wNjf63sC@fat_crate.local/ Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: e317a69 ("drm/radeon: Implement client-based fbdev emulation") Cc: Alex Deucher <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: "Christian König" <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>

Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.4.0-rc5 #1 Not tainted ----------------------------------------------------- kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7 and this task is already holding: ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126 which would create a new lock dependency: (&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2} but this new dependency connects a SOFTIRQ-irq-safe lock: (&sta->rate_ctrl_lock){+.-.}-{2:2} etc. etc. etc. Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not enough to pacify lockdep, but changing them all on pers.lock has worked. Fixes: a8938bc ("wifi: iwlwifi: mvm: Add locking to the rate read flow") Signed-off-by: Hugh Dickins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>

It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Martin Schiller <[email protected]> Signed-off-by: David S. Miller <[email protected]>

In certain situations a program with subprograms may have a NULL extable entry. This should not happen, and when it does, it turns a single trap into multiple. Add a test case for further debugging and to prevent regressions. The test-case contains three essentially identical versions of the same test because just one program may not be sufficient to trigger the oops. This is due to the fact that the items are stored in a binary tree and have identical values so it's possible to sometimes find the ksym with the extable. With 3 copies, this has been reliable on this author's test systems. When triggered out of this test case, the oops looks like this: BUG: kernel NULL pointer dereference, address: 000000000000000c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1132 Comm: test_progs Tainted: G OE 6.4.0-rc3+ #2 RIP: 0010:cmp_ex_search+0xb/0x30 Code: cc cc cc cc e8 36 cb 03 00 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 48 89 e5 48 8b 07 <48> 63 0e 48 01 f1 31 d2 48 39 c8 19 d2 48 39 c8 b8 01 00 00 00 0f RSP: 0018:ffffb30c4291f998 EFLAGS: 00010006 RAX: ffffffffc00b49da RBX: 0000000000000002 RCX: 000000000000000c RDX: 0000000000000002 RSI: 000000000000000c RDI: ffffb30c4291f9e8 RBP: ffffb30c4291f998 R08: ffffffffab1a42d0 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffffab1a42d0 R12: ffffb30c4291f9e8 R13: 000000000000000c R14: 000000000000000c R15: 0000000000000000 FS: 00007fb5d9e044c0(0000) GS:ffff92e95ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000c CR3: 000000010c3a2005 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bsearch+0x41/0x90 ? __pfx_cmp_ex_search+0x10/0x10 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_extable+0x3b/0x60 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_bpf_extables+0x10d/0x190 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_exception_tables+0x5d/0x70 fixup_exception+0x3f/0x5b0 ? look_up_lock_class+0x61/0x110 ? __lock_acquire+0x6b8/0x3560 ? __lock_acquire+0x6b8/0x3560 ? __lock_acquire+0x6b8/0x3560 kernelmode_fixup_or_oops+0x46/0x110 __bad_area_nosemaphore+0x68/0x2b0 ? __lock_acquire+0x6b8/0x3560 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x81/0xa0 exc_page_fault+0xd6/0x210 asm_exc_page_fault+0x2b/0x30 RIP: 0010:bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c Code: f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 7f 08 49 bb 00 00 00 00 00 80 00 00 4c 39 df 73 04 31 f6 eb 04 <48> 8b 77 00 49 bb 00 00 00 00 00 80 00 00 48 81 c7 7c 00 00 00 4c RSP: 0018:ffffb30c4291fcb8 EFLAGS: 00010282 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 00000000cddf1af1 RSI: 000000005315a00d RDI: ffffffffffffffea RBP: ffffb30c4291fcb8 R08: ffff92e644bf38a8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000800000000000 R12: ffff92e663652690 R13: 00000000000001c8 R14: 00000000000001c8 R15: 0000000000000003 bpf_trampoline_251255721842_2+0x63/0x1000 bpf_testmod_return_ptr+0x9/0xb0 [bpf_testmod] ? bpf_testmod_test_read+0x43/0x2d0 [bpf_testmod] sysfs_kf_bin_read+0x60/0x90 kernfs_fop_read_iter+0x143/0x250 vfs_read+0x240/0x2a0 ksys_read+0x70/0xe0 __x64_sys_read+0x1f/0x30 do_syscall_64+0x68/0xa0 ? syscall_exit_to_user_mode+0x77/0x1f0 ? do_syscall_64+0x77/0xa0 ? irqentry_exit+0x35/0xa0 ? sysvec_apic_timer_interrupt+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fb5da00a392 Code: ac 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007ffc5b3cab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055bee7b8b100 RCX: 00007fb5da00a392 RDX: 00000000000001c8 RSI: 0000000000000000 RDI: 0000000000000009 RBP: 00007ffc5b3caba0 R08: 0000000000000000 R09: 0000000000000037 R10: 000055bee7b8c2a7 R11: 0000000000000246 R12: 000055bee78f1f60 R13: 00007ffc5b3cae90 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: bpf_testmod(OE) nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common intel_uncore_frequency_common ppdev nfit crct10dif_pclmul crc32_pclmul psmouse ghash_clmulni_intel sha512_ssse3 aesni_intel parport_pc crypto_simd cryptd input_leds parport rapl ena i2c_piix4 mac_hid serio_raw ramoops reed_solomon pstore_blk drm pstore_zone efi_pstore autofs4 [last unloaded: bpf_testmod(OE)] CR2: 000000000000000c Though there may be some variation, depending on which suprogram triggers the bug. Signed-off-by: Krister Johansen <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/4ebf95ec857cd785b81db69f3e408c039ad8408b.1686616663.git.kjlx@templeofstupid.com Signed-off-by: Alexei Starovoitov <[email protected]>

The call to mmc_request_done() can schedule, so it must not be called from irq context. Wake the irq thread if it needs to be called, and let its existing logic do its work. Fixes the following kernel bug, which appears when running an RT patched kernel on the AmLogic Meson AXG A113X SoC: [ 11.111407] BUG: scheduling while atomic: kworker/0:1H/75/0x00010001 [ 11.111438] Modules linked in: [ 11.111451] CPU: 0 PID: 75 Comm: kworker/0:1H Not tainted 6.4.0-rc3-rt2-rtx-00081-gfd07f41ed6b4-dirty #1 [ 11.111461] Hardware name: RTX AXG A113X Linux Platform Board (DT) [ 11.111469] Workqueue: kblockd blk_mq_run_work_fn [ 11.111492] Call trace: [ 11.111497] dump_backtrace+0xac/0xe8 [ 11.111510] show_stack+0x18/0x28 [ 11.111518] dump_stack_lvl+0x48/0x60 [ 11.111530] dump_stack+0x18/0x24 [ 11.111537] __schedule_bug+0x4c/0x68 [ 11.111548] __schedule+0x80/0x574 [ 11.111558] schedule_loop+0x2c/0x50 [ 11.111567] schedule_rtlock+0x14/0x20 [ 11.111576] rtlock_slowlock_locked+0x468/0x730 [ 11.111587] rt_spin_lock+0x40/0x64 [ 11.111596] __wake_up_common_lock+0x5c/0xc4 [ 11.111610] __wake_up+0x18/0x24 [ 11.111620] mmc_blk_mq_req_done+0x68/0x138 [ 11.111633] mmc_request_done+0x104/0x118 [ 11.111644] meson_mmc_request_done+0x38/0x48 [ 11.111654] meson_mmc_irq+0x128/0x1f0 [ 11.111663] __handle_irq_event_percpu+0x70/0x114 [ 11.111674] handle_irq_event_percpu+0x18/0x4c [ 11.111683] handle_irq_event+0x80/0xb8 [ 11.111691] handle_fasteoi_irq+0xa4/0x120 [ 11.111704] handle_irq_desc+0x20/0x38 [ 11.111712] generic_handle_domain_irq+0x1c/0x28 [ 11.111721] gic_handle_irq+0x8c/0xa8 [ 11.111735] call_on_irq_stack+0x24/0x4c [ 11.111746] do_interrupt_handler+0x88/0x94 [ 11.111757] el1_interrupt+0x34/0x64 [ 11.111769] el1h_64_irq_handler+0x18/0x24 [ 11.111779] el1h_64_irq+0x64/0x68 [ 11.111786] __add_wait_queue+0x0/0x4c [ 11.111795] mmc_blk_rw_wait+0x84/0x118 [ 11.111804] mmc_blk_mq_issue_rq+0x5c4/0x654 [ 11.111814] mmc_mq_queue_rq+0x194/0x214 [ 11.111822] blk_mq_dispatch_rq_list+0x3ac/0x528 [ 11.111834] __blk_mq_sched_dispatch_requests+0x340/0x4d0 [ 11.111847] blk_mq_sched_dispatch_requests+0x38/0x70 [ 11.111858] blk_mq_run_work_fn+0x3c/0x70 [ 11.111865] process_one_work+0x17c/0x1f0 [ 11.111876] worker_thread+0x1d4/0x26c [ 11.111885] kthread+0xe4/0xf4 [ 11.111894] ret_from_fork+0x10/0x20 Fixes: 51c5d84 ("MMC: meson: initial support for GX platforms") Cc: [email protected] Signed-off-by: Martin Hundebøll <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>

XFRM core provides two callbacks to release resources, one is .xdo_dev_policy_delete() and another is .xdo_dev_policy_free(). This separation allows delayed release so "ip xfrm policy free" commands won't starve. Unfortunately, mlx5 command interface can't run in .xdo_dev_policy_free() callbacks as the latter runs in ATOMIC context. BUG: scheduling while atomic: swapper/7/0/0x00000100 Modules linked in: act_mirred act_tunnel_key cls_flower sch_ingress vxlan mlx5_vdpa vringh vhost_iotlb vdpa rpcrdma rdma_ucm ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.3.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x33/0x50 __schedule_bug+0x4e/0x60 __schedule+0x5d5/0x780 ? __mod_timer+0x286/0x3d0 schedule+0x50/0x90 schedule_timeout+0x7c/0xf0 ? __bpf_trace_tick_stop+0x10/0x10 __wait_for_common+0x88/0x190 ? usleep_range_state+0x90/0x90 cmd_exec+0x42e/0xb40 [mlx5_core] mlx5_cmd_do+0x1e/0x40 [mlx5_core] mlx5_cmd_exec+0x18/0x30 [mlx5_core] mlx5_cmd_delete_fte+0xa8/0xd0 [mlx5_core] del_hw_fte+0x60/0x120 [mlx5_core] mlx5_del_flow_rules+0xec/0x270 [mlx5_core] ? default_send_IPI_single_phys+0x26/0x30 mlx5e_accel_ipsec_fs_del_pol+0x1a/0x60 [mlx5_core] mlx5e_xfrm_free_policy+0x15/0x20 [mlx5_core] xfrm_policy_destroy+0x5a/0xb0 xfrm4_dst_destroy+0x7b/0x100 dst_destroy+0x37/0x120 rcu_core+0x2d6/0x540 __do_softirq+0xcd/0x273 irq_exit_rcu+0x82/0xb0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 7a 4d ee 00 85 c0 7e 07 0f 00 2d 2f 98 2e 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 40 b4 02 00 RSP: 0018:ffff888100843ee0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffff888100812b00 RCX: 4000000000000000 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000002d2ec RBP: 0000000000000007 R08: 00000021daeded59 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000f R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 default_idle_call+0x30/0xb0 do_idle+0x1c1/0x1d0 cpu_startup_entry+0x19/0x20 start_secondary+0xfe/0x120 secondary_startup_64_no_verify+0xf3/0xfb </TASK> bad: scheduling from the idle thread! Fixes: a5b8ca9 ("net/mlx5e: Add XFRM policy offload logic") Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

…phys When booting with "intremap=off" and "x2apic_phys" on the kernel command line, the physical x2APIC driver ends up being used even when x2APIC mode is disabled ("intremap=off" disables x2APIC mode). This happens because the first compound condition check in x2apic_phys_probe() is false due to x2apic_mode == 0 and so the following one returns true after default_acpi_madt_oem_check() having already selected the physical x2APIC driver. This results in the following panic: kernel BUG at arch/x86/kernel/apic/io_apic.c:2409! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc2-ver4.1rc2 #2 Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021 RIP: 0010:setup_IO_APIC+0x9c/0xaf0 Call Trace: <TASK> ? native_read_msr apic_intr_mode_init x86_late_time_init start_kernel x86_64_start_reservations x86_64_start_kernel secondary_startup_64_no_verify </TASK> which is: setup_IO_APIC: apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); for_each_ioapic(ioapic) BUG_ON(mp_irqdomain_create(ioapic)); Return 0 to denote that x2APIC has not been enabled when probing the physical x2APIC driver. [ bp: Massage commit message heavily. ] Fixes: 9ebd680 ("x86, apic: Use probe routines to simplify apic selection") Signed-off-by: Dheeraj Kumar Srivastava <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Kishon Vijay Abraham I <[email protected]> Reviewed-by: Vasant Hegde <[email protected]> Reviewed-by: Cyrill Gorcunov <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]

…plate When commit 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") repurposed the writeback_dirty_page trace event as a template to create its new wait_on_page_writeback trace event, it ended up opening a window to NULL pointer dereference crashes due to the (infrequent) occurrence of a race where an access to a page in the swap-cache happens concurrently with the moment this page is being written to disk and the tracepoint is enabled: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023 RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0 Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044 RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006 R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000 R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200 FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_writeback_folio_template+0x76/0xf0 folio_wait_writeback+0x6b/0x80 shmem_swapin_folio+0x24a/0x500 ? filemap_get_entry+0xe3/0x140 shmem_get_folio_gfp+0x36e/0x7c0 ? find_busiest_group+0x43/0x1a0 shmem_fault+0x76/0x2a0 ? __update_load_avg_cfs_rq+0x281/0x2f0 __do_fault+0x33/0x130 do_read_fault+0x118/0x160 do_pte_missing+0x1ed/0x2a0 __handle_mm_fault+0x566/0x630 handle_mm_fault+0x91/0x210 do_user_addr_fault+0x22c/0x740 exc_page_fault+0x65/0x150 asm_exc_page_fault+0x22/0x30 This problem arises from the fact that the repurposed writeback_dirty_page trace event code was written assuming that every pointer to mapping (struct address_space) would come from a file-mapped page-cache object, thus mapping->host would always be populated, and that was a valid case before commit 19343b5. The swap-cache address space (swapper_spaces), however, doesn't populate its ->host (struct inode) pointer, thus leading to the crashes in the corner-case aforementioned. commit 19343b5 ended up breaking the assignment of __entry->name and __entry->ino for the wait_on_page_writeback tracepoint -- both dependent on mapping->host carrying a pointer to a valid inode. The assignment of __entry->name was fixed by commit 68f23b8 ("memcg: fix a crash in wb_workfn when a device disappears"), and this commit fixes the remaining case, for __entry->ino. Link: https://lkml.kernel.org/r/[email protected] Fixes: 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") Signed-off-by: Rafael Aquini <[email protected]> Reviewed-by: Yafang Shao <[email protected]> Cc: Aristeu Rozanski <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

@offset

[BUG] David reported an ASSERT() get triggered during fio load on 8 devices with data/raid6 and metadata/raid1c3: fio --rw=randrw --randrepeat=1 --size=3000m \ --bsrange=512b-64k --bs_unaligned \ --ioengine=libaio --fsync=1024 \ --name=job0 --name=job1 \ The ASSERT() is from rbio_add_bio() of raid56.c: ASSERT(orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN); Which is checking if the target rbio is crossing the full stripe boundary. [100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622 [100.795] ------------[ cut here ]------------ [100.796] kernel BUG at fs/btrfs/raid56.c:1622! [100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124 [100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [100.802] Workqueue: writeback wb_workfn (flush-btrfs-1) [100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs] [100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246 [100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01 [100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001 [100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f [100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400 [100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000 [100.817] FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 [100.821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0 [100.824] Call Trace: [100.825] <TASK> [100.825] ? die+0x32/0x80 [100.826] ? do_trap+0x12d/0x160 [100.827] ? rbio_add_bio+0x204/0x210 [btrfs] [100.827] ? rbio_add_bio+0x204/0x210 [btrfs] [100.829] ? do_error_trap+0x90/0x130 [100.830] ? rbio_add_bio+0x204/0x210 [btrfs] [100.831] ? handle_invalid_op+0x2c/0x30 [100.833] ? rbio_add_bio+0x204/0x210 [btrfs] [100.835] ? exc_invalid_op+0x29/0x40 [100.836] ? asm_exc_invalid_op+0x16/0x20 [100.837] ? rbio_add_bio+0x204/0x210 [btrfs] [100.837] raid56_parity_write+0x64/0x270 [btrfs] [100.838] btrfs_submit_chunk+0x26e/0x800 [btrfs] [100.840] ? btrfs_bio_init+0x80/0x80 [btrfs] [100.841] ? release_pages+0x503/0x6d0 [100.842] ? folio_unlock+0x2f/0x60 [100.844] ? __folio_put+0x60/0x60 [100.845] ? btrfs_do_readpage+0xae0/0xae0 [btrfs] [100.847] btrfs_submit_bio+0x21/0x60 [btrfs] [100.847] submit_one_bio+0x6a/0xb0 [btrfs] [100.849] extent_write_cache_pages+0x395/0x680 [btrfs] [100.850] ? __extent_writepage+0x520/0x520 [btrfs] [100.851] ? mark_usage+0x190/0x190 [100.852] extent_writepages+0xdb/0x130 [btrfs] [100.853] ? extent_write_locked_range+0x480/0x480 [btrfs] [100.854] ? mark_usage+0x190/0x190 [100.854] ? attach_extent_buffer_page+0x220/0x220 [btrfs] [100.855] ? reacquire_held_locks+0x178/0x280 [100.856] ? writeback_sb_inodes+0x245/0x7f0 [100.857] do_writepages+0x102/0x2e0 [100.858] ? page_writeback_cpu_online+0x10/0x10 [100.859] ? __lock_release.isra.0+0x14a/0x4d0 [100.860] ? reacquire_held_locks+0x280/0x280 [100.861] ? __lock_acquired+0x1e9/0x3d0 [100.862] ? do_raw_spin_lock+0x1b0/0x1b0 [100.863] __writeback_single_inode+0x94/0x450 [100.864] writeback_sb_inodes+0x372/0x7f0 [100.864] ? lock_sync+0xd0/0xd0 [100.865] ? do_raw_spin_unlock+0x93/0xf0 [100.866] ? sync_inode_metadata+0xc0/0xc0 [100.867] ? rwsem_optimistic_spin+0x340/0x340 [100.868] __writeback_inodes_wb+0x70/0x130 [100.869] wb_writeback+0x2d1/0x530 [100.869] ? __writeback_inodes_wb+0x130/0x130 [100.870] ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0 [100.870] wb_do_writeback+0x3eb/0x480 [100.871] ? wb_writeback+0x530/0x530 [100.871] ? mark_lock_irq+0xcd0/0xcd0 [100.872] wb_workfn+0xe0/0x3f0< [CAUSE] Commit a97699d ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce u64 division. Function btrfs_max_io_len() is to get the length to the stripe boundary. It calculates the full stripe start offset (inside the chunk) by the following code: *full_stripe_start = rounddown(*stripe_nr, nr_data_stripes(map)) << BTRFS_STRIPE_LEN_SHIFT; The calculation itself is fine, but the value returned by rounddown() is dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which returned int). Thus the result is also u32, then we do the left shift, which can overflow u32. If such overflow happens, @full_stripe_start will be a value way smaller than @offset, causing later "full_stripe_len - (offset - *full_stripe_start)" to underflow, thus make later length calculation to have no stripe boundary limit, resulting a write bio to exceed stripe boundary. There are some other locations like this, with a u32 @stripe_nr got left shift, which can lead to a similar overflow. [FIX] Fix all @stripe_nr with left shift with a type cast to u64 before the left shift. Those involved @stripe_nr or similar variables are recording the stripe number inside the chunk, which is small enough to be contained by u32, but their offset inside the chunk can not fit into u32. Thus for those specific left shifts, a type cast to u64 is necessary so this patch does not touch them and the code will be cleaned up in the future to keep the fix minimal. Reported-by: David Sterba <[email protected]> Fixes: a97699d ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN") Tested-by: David Sterba <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>

Christoph reported a divide by zero bug in mptcp_recvmsg(): divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018 Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60 RSP: 0018:ffffc90000a07a18 EFLAGS: 00010246 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000040000 RDX: 0000000000000000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 000000000000ffd7 R08: ffffffff820cf297 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffff8103d1a0 R12: 0000000000003f00 R13: 0000000000300000 R14: ffff888101cf3540 R15: 0000000000180000 FS: 00007f9af4c09640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b33824000 CR3: 000000012f241001 CR4: 0000000000170ee0 Call Trace: <TASK> __tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611 mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034 inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861 ____sys_recvmsg+0x269/0x2b0 net/socket.c:1019 ___sys_recvmsg+0xe6/0x260 net/socket.c:2764 do_recvmmsg+0x1a5/0x470 net/socket.c:2858 __do_sys_recvmmsg net/socket.c:2937 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f9af58fc6a9 Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007f9af4c08cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f9af58fc6a9 RDX: 0000000000000001 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000f00 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> mptcp_recvmsg is allowed to release the msk socket lock when blocking, and before re-acquiring it another thread could have switched the sock to TCP_LISTEN status - with a prior connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss. Address the issue preventing the disconnect if some other process is concurrently performing a blocking syscall on the same socket, alike commit 4faeee0 ("tcp: deny tcp_disconnect() when threads are waiting"). Fixes: a6b118f ("mptcp: add receive buffer auto-tuning") Cc: [email protected] Reported-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#404 Signed-off-by: Paolo Abeni <[email protected]> Tested-by: Christoph Paasch <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>

syzbot managed to trigger a divide error [1] in netem. It could happen if q->rate changes while netem_enqueue() is running, since q->rate is read twice. It turns out netem_change() always lacked proper synchronization. [1] divide error: 0000 [#1] SMP KASAN CPU: 1 PID: 7867 Comm: syz-executor.1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 RIP: 0010:div64_u64 include/linux/math64.h:69 [inline] RIP: 0010:packet_time_ns net/sched/sch_netem.c:357 [inline] RIP: 0010:netem_enqueue+0x2067/0x36d0 net/sched/sch_netem.c:576 Code: 89 e2 48 69 da 00 ca 9a 3b 42 80 3c 28 00 4c 8b a4 24 88 00 00 00 74 0d 4c 89 e7 e8 c3 4f 3b fd 48 8b 4c 24 18 48 89 d8 31 d2 <49> f7 34 24 49 01 c7 4c 8b 64 24 48 4d 01 f7 4c 89 e3 48 c1 eb 03 RSP: 0018:ffffc9000dccea60 EFLAGS: 00010246 RAX: 000001a442624200 RBX: 000001a442624200 RCX: ffff888108a4f000 RDX: 0000000000000000 RSI: 000000000000070d RDI: 000000000000070d RBP: ffffc9000dcceb90 R08: ffffffff849c5e26 R09: fffffbfff10e1297 R10: 0000000000000000 R11: dffffc0000000001 R12: ffff888108a4f358 R13: dffffc0000000000 R14: 0000001a8cd9a7ec R15: 0000000000000000 FS: 00007fa73fe18700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa73fdf7718 CR3: 000000011d36e000 CR4: 0000000000350ee0 Call Trace: <TASK> [<ffffffff84714385>] __dev_xmit_skb net/core/dev.c:3931 [inline] [<ffffffff84714385>] __dev_queue_xmit+0xcf5/0x3370 net/core/dev.c:4290 [<ffffffff84d22df2>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff84d22df2>] neigh_hh_output include/net/neighbour.h:531 [inline] [<ffffffff84d22df2>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff84d22df2>] ip_finish_output2+0xb92/0x10d0 net/ipv4/ip_output.c:235 [<ffffffff84d21e63>] __ip_finish_output+0xc3/0x2b0 [<ffffffff84d10a81>] ip_finish_output+0x31/0x2a0 net/ipv4/ip_output.c:323 [<ffffffff84d10f14>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff84d10f14>] ip_output+0x224/0x2a0 net/ipv4/ip_output.c:437 [<ffffffff84d123b5>] dst_output include/net/dst.h:444 [inline] [<ffffffff84d123b5>] ip_local_out net/ipv4/ip_output.c:127 [inline] [<ffffffff84d123b5>] __ip_queue_xmit+0x1425/0x2000 net/ipv4/ip_output.c:542 [<ffffffff84d12fdc>] ip_queue_xmit+0x4c/0x70 net/ipv4/ip_output.c:556 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Cc: Cong Wang <[email protected]> Cc: Jiri Pirko <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

instrument put_user #1

instrument put_user #1

dvyukov commented May 22, 2017

instrument put_user #1

instrument put_user #1

Comments

dvyukov commented May 22, 2017