transport: stop always closing connections when loopy returns (#6110)

internal/transport/controlbuf.go

@@ -22,6 +22,7 @@ import (
 	"bytes"
 	"errors"
 	"fmt"
+	"net"
 	"runtime"
 	"strconv"
 	"sync"
@@ -486,12 +487,13 @@ type loopyWriter struct {
 	hEnc          *hpack.Encoder // HPACK encoder.
 	bdpEst        *bdpEstimator
 	draining      bool
+	conn          net.Conn
 
 	// Side-specific handlers
 	ssGoAwayHandler func(*goAway) (bool, error)
 }
 
-func newLoopyWriter(s side, fr *framer, cbuf *controlBuffer, bdpEst *bdpEstimator) *loopyWriter {
+func newLoopyWriter(s side, fr *framer, cbuf *controlBuffer, bdpEst *bdpEstimator, conn net.Conn) *loopyWriter {
 	var buf bytes.Buffer
 	l := &loopyWriter{
 		side:          s,
@@ -504,6 +506,7 @@ func newLoopyWriter(s side, fr *framer, cbuf *controlBuffer, bdpEst *bdpEstimato
 		hBuf:          &buf,
 		hEnc:          hpack.NewEncoder(&buf),
 		bdpEst:        bdpEst,
+		conn:          conn,
 	}
 	return l
 }
@@ -521,15 +524,27 @@ const minBatchSize = 1000
 // 2. Stream level flow control quota available.
 //
 // In each iteration of run loop, other than processing the incoming control
-// frame, loopy calls processData, which processes one node from the activeStreams linked-list.
-// This results in writing of HTTP2 frames into an underlying write buffer.
-// When there's no more control frames to read from controlBuf, loopy flushes the write buffer.
-// As an optimization, to increase the batch size for each flush, loopy yields the processor, once
-// if the batch size is too low to give stream goroutines a chance to fill it up.
+// frame, loopy calls processData, which processes one node from the
+// activeStreams linked-list.  This results in writing of HTTP2 frames into an
+// underlying write buffer.  When there's no more control frames to read from
+// controlBuf, loopy flushes the write buffer.  As an optimization, to increase
+// the batch size for each flush, loopy yields the processor, once if the batch
+// size is too low to give stream goroutines a chance to fill it up.
+//
+// Upon exiting, if the error causing the exit is not an I/O error, run()
+// flushes and closes the underlying connection.  Otherwise, the connection is
+// left open to allow the I/O error to be encountered by the reader instead.
 func (l *loopyWriter) run() (err error) {
-	// Always flush the writer before exiting in case there are pending frames
-	// to be sent.
-	defer l.framer.writer.Flush()
+	defer func() {
+		if logger.V(logLevel) {
+			logger.Infof("transport: loopyWriter exiting with error: %v", err)
+		}
+		if !isIOError(err) {
+			l.framer.writer.Flush()
+			l.conn.Close()
+		}
+		l.cbuf.finish()
+	}()
 	for {
 		it, err := l.cbuf.get(true)
 		if err != nil {
@@ -757,6 +772,7 @@ func (l *loopyWriter) cleanupStreamHandler(c *cleanupStream) error {
 		}
 	}
 	if l.draining && len(l.estdStreams) == 0 {
+		// Flush and close the connection; we are done with it.
 		return errors.New("finished processing active streams while in draining mode")
 	}
 	return nil
@@ -792,6 +808,7 @@ func (l *loopyWriter) incomingGoAwayHandler(*incomingGoAway) error {
 	if l.side == clientSide {
 		l.draining = true
 		if len(l.estdStreams) == 0 {
+			// Flush and close the connection; we are done with it.
 			return errors.New("received GOAWAY with no active streams")
 		}
 	}
@@ -810,13 +827,6 @@ func (l *loopyWriter) goAwayHandler(g *goAway) error {
 	return nil
 }
 
-func (l *loopyWriter) closeConnectionHandler() error {
-	// Exit loopyWriter entirely by returning an error here.  This will lead to
-	// the transport closing the connection, and, ultimately, transport
-	// closure.
-	return ErrConnClosing
-}
-
 func (l *loopyWriter) handle(i interface{}) error {
 	switch i := i.(type) {
 	case *incomingWindowUpdate:
@@ -846,7 +856,9 @@ func (l *loopyWriter) handle(i interface{}) error {
 	case *outFlowControlSizeRequest:
 		l.outFlowControlSizeRequestHandler(i)
 	case closeConnection:
-		return l.closeConnectionHandler()
+		// Just return a non-I/O error and run() will flush and close the
+		// connection.
+		return ErrConnClosing
 	default:
 		return fmt.Errorf("transport: unknown control message type %T", i)
 	}
@@ -905,7 +917,7 @@ func (l *loopyWriter) processData() (bool, error) {
 				return false, err
 			}
 			if err := l.cleanupStreamHandler(trailer.cleanup); err != nil {
-				return false, nil
+				return false, err
 			}
 		} else {
 			l.activeStreams.enqueue(str)

internal/transport/http2_client.go

@@ -444,15 +444,8 @@ func newHTTP2Client(connectCtx, ctx context.Context, addr resolver.Address, opts
 		return nil, err
 	}
 	go func() {
-		t.loopy = newLoopyWriter(clientSide, t.framer, t.controlBuf, t.bdpEst)
-		err := t.loopy.run()
-		if logger.V(logLevel) {
-			logger.Infof("transport: loopyWriter exited. Closing connection. Err: %v", err)
-		}
-		// Do not close the transport.  Let reader goroutine handle it since
-		// there might be data in the buffers.
-		t.conn.Close()
-		t.controlBuf.finish()
+		t.loopy = newLoopyWriter(clientSide, t.framer, t.controlBuf, t.bdpEst, t.conn)
+		t.loopy.run()
 		close(t.writerDone)
 	}()
 	return t, nil

internal/transport/http2_server.go

@@ -331,14 +331,9 @@ func NewServerTransport(conn net.Conn, config *ServerConfig) (_ ServerTransport,
 	t.handleSettings(sf)
 
 	go func() {
-		t.loopy = newLoopyWriter(serverSide, t.framer, t.controlBuf, t.bdpEst)
+		t.loopy = newLoopyWriter(serverSide, t.framer, t.controlBuf, t.bdpEst, t.conn)
 		t.loopy.ssGoAwayHandler = t.outgoingGoAwayHandler
-		err := t.loopy.run()
-		if logger.V(logLevel) {
-			logger.Infof("transport: loopyWriter exited. Closing connection. Err: %v", err)
-		}
-		t.conn.Close()
-		t.controlBuf.finish()
+		t.loopy.run()
 		close(t.writerDone)
 	}()
 	go t.keepalive()
@@ -1355,9 +1350,6 @@ func (t *http2Server) outgoingGoAwayHandler(g *goAway) (bool, error) {
 			return false, err
 		}
 		if retErr != nil {
-			// Abruptly close the connection following the GoAway (via
-			// loopywriter).  But flush out what's inside the buffer first.
-			t.framer.writer.Flush()
 			return false, retErr
 		}
 		return true, nil

internal/transport/http_util.go

@@ -21,6 +21,7 @@ package transport
 import (
 	"bufio"
 	"encoding/base64"
+	"errors"
 	"fmt"
 	"io"
 	"math"
@@ -330,7 +331,8 @@ func (w *bufWriter) Write(b []byte) (n int, err error) {
 		return 0, w.err
 	}
 	if w.batchSize == 0 { // Buffer has been disabled.
-		return w.conn.Write(b)
+		n, err = w.conn.Write(b)
+		return n, toIOError(err)
 	}
 	for len(b) > 0 {
 		nn := copy(w.buf[w.offset:], b)
@@ -352,10 +354,30 @@ func (w *bufWriter) Flush() error {
 		return nil
 	}
 	_, w.err = w.conn.Write(w.buf[:w.offset])
+	w.err = toIOError(w.err)
 	w.offset = 0
 	return w.err
 }
 
+type ioError struct {
+	error
+}
+
+func (i ioError) Unwrap() error {
+	return i.error
+}
+
+func isIOError(err error) bool {
+	return errors.As(err, &ioError{})
+}
+
+func toIOError(err error) error {
+	if err == nil {
+		return nil
+	}
+	return ioError{error: err}
+}
+
 type framer struct {
 	writer *bufWriter
 	fr     *http2.Framer