[docs] Quantization (#1236)

* first draft

* feedback

* update api doc

* feedback

docs/source/_toctree.yml

@@ -39,6 +39,8 @@
 
 - title: Developer guides
   sections:
+  - local: developer_guides/quantization
+    title: Quantization
   - local: developer_guides/custom_models
     title: Working with custom models
   - local: developer_guides/low_level_api

docs/source/developer_guides/quantization.md

@@ -0,0 +1,134 @@
+<!--Copyright 2023 The HuggingFace Team. All rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
+the License. You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
+an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
+specific language governing permissions and limitations under the License.
+
+⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
+rendered properly in your Markdown viewer.
+
+-->
+
+# Quantization
+
+Quantization represents data with fewer bits, making it a useful technique for reducing memory-usage and accelerating inference especially when it comes to large language models (LLMs). There are several ways to quantize a model including:
+
+* optimizing which model weights are quantized with the [AWQ](https://hf.co/papers/2306.00978) algorithm
+* independently quantizing each row of a weight matrix with the [GPTQ](https://hf.co/papers/2210.17323) algorithm
+* quantizing to 8-bit and 4-bit precision with the [bitsandbytes](https://github.com/TimDettmers/bitsandbytes) library
+
+However, after a model is quantized it isn't typically further trained for downstream tasks because training can be unstable due to the lower precision of the weights and activations. But since PEFT methods only add *extra* trainable parameters, this allows you to train a quantized model with a PEFT adapter on top! Combining quantization with PEFT can be a good strategy for training even the largest models on a single GPU. For example, [QLoRA](https://hf.co/papers/2305.14314) is a method that quantizes a model to 4-bits and then trains it with LoRA. This method allows you to finetune a 65B parameter model on a single 48GB GPU!
+
+In this guide, you'll see how to quantize a model to 4-bits and train it with LoRA.
+
+## Quantize a model
+
+[bitsandbytes](https://github.com/TimDettmers/bitsandbytes) is a quantization library with a Transformers integration. With this integration, you can quantize a model to 8 or 4-bits and enable many other options by configuring the [`~transformers.BitsAndBytesConfig`] class. For example, you can:
+
+* set `load_in_4bit=True` to quantize the model to 4-bits when you load it
+* set `bnb_4bit_quant_type="nf4"` to use a special 4-bit data type for weights initialized from a normal distribution
+* set `bnb_4bit_use_double_quant=True` to use a nested quantization scheme to quantize the already quantized weights
+* set `bnb_4bit_compute_dtype=torch.bfloat16` to use bfloat16 for faster computation
+
+```py
+import torch
+from transformers import BitsAndBytesConfig
+
+config = BitsAndBytesConfig(
+    load_in_4bit=True,
+    bnb_4bit_quant_type="nf4",
+    bnb_4bit_use_double_quant=True,
+    bnb_4bit_compute_dtype=torch.bfloat16,
+)
+```
+
+Pass the `config` to the [`~transformers.AutoModelForCausalLM.from_pretrained`] method.
+
+```py
+from transformers import AutoModelForCausalLM
+
+model = AutoModelForCausalLM.from_pretrained("mistralai/Mistral-7B-v0.1", quantization_config=config)
+```
+
+Next, you should call the [`~peft.utils.prepare_model_for_kbit_training`] function to preprocess the quantized model for traininng.
+
+```py
+from peft import prepare_model_for_kbit_training
+
+model = prepare_model_for_kbit_training(model)
+```
+
+Now that the quantized model is ready, let's set up a configuration.
+
+## LoraConfig
+
+Create a [`LoraConfig`] with the following parameters (or choose your own):
+
+```py
+from peft import LoraConfig
+
+config = LoraConfig(
+    r=16,
+    lora_alpha=8,
+    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
+    lora_dropout=0.05
+    bias="none",
+    task_type="CAUSAL_LM"
+)
+```
+
+Then use the [`get_peft_model`] function to create a [`PeftModel`] from the quantized model and configuration.
+
+```py
+from peft import get_peft_model
+
+model = get_peft_model(model, config)
+```
+
+You're all set for training with whichever training method you prefer!
+
+### LoftQ initialization
+
+[LoftQ](https://hf.co/papers/2310.08659) initializes LoRA weights such that the quantization error is minimized, and it can improve performance when training quantized models. To get started, create a [`LoftQConfig`] and set `loftq_bits=4` for 4-bit quantization.
+
+<Tip warning={true}>
+
+LoftQ initialization does not require quantizing the base model with the `load_in_4bits` parameter in the [`~transformers.AutoModelForCausalLM.from_pretrained`] method! Learn more about LoftQ initialization in the [Initialization options](../conceptual_guides/lora#initialization-options) section.
+
+</Tip>
+
+```py
+from peft import AutoModelForCausalLM, LoftQConfig, LoraConfig, get_peft_model
+
+model = AutoModelForCausalLM.from_pretrained("mistralai/Mistral-7B-v0.1")
+loftq_config = LoftQConfig(loftq_bits=4)
+```
+
+Now pass the `loftq_config` to the [`LoraConfig`] to enable LoftQ initialization, and create a [`PeftModel`] for training.
+
+```py
+lora_config = LoraConfig(
+    init_lora_weights="loftq",
+    loftq_config=loftq_config,
+    r=16,
+    lora_alpha=8,
+    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
+    lora_dropout=0.05
+    bias="none",
+    task_type="CAUSAL_LM"
+)
+
+model = get_peft_model(model, lora_config)
+```
+
+## Next steps
+
+If you're interested in learning more about quantization, the following may be helpful:
+
+* Learn more about details about QLoRA and check out some benchmarks on its impact in the [Making LLMs even more accessible with bitsandbytes, 4-bit quantization and QLoRA](https://huggingface.co/blog/4bit-transformers-bitsandbytes) blog post.
+* Read more about different quantization schemes in the Transformers [Quantization](https://hf.co/docs/transformers/main/quantization) guide.

docs/source/package_reference/peft_model.md

@@ -55,4 +55,6 @@ A `PeftModel` for getting extracting features/embeddings from transformer models
 
 ## Utilities
 
-[[autodoc]] get_peft_model
+[[autodoc]] get_peft_model
+
+[[autodoc]] utils.prepare_model_for_kbit_training