[close #27] add a lot work from Magnus Thomé (related to ESP32 family)

iDoka · Jan 15, 2024 · a68af88 · a68af88
1 parent df362ff
commit a68af88
Showing 1 changed file with 6 additions and 1 deletion.
diff --git a/README.md b/README.md
@@ -408,15 +408,20 @@ All kind of HW like CAN bus USB2CAN dongles, loggers, sniffers, adapters, etc.
 * [esp32s3-slcan](https://github.com/Pacerino/TWAI_SLCAN) - SLCAN implementation for ESP32-S3 (based on [esp32-slcan](https://github.com/mintynet/esp32-slcan)).
 <!--lint enable double-link-->
 * [ESP32-Arduino-CAN](https://github.com/miwagner/ESP32-Arduino-CAN) - Arduino CAN-Bus library for ESP32.
-* [ESP32RET](https://github.com/collin80/ESP32RET) - CAN Reverse engineering tool for ESP32 based boards (unmaintained).
 * [ESP32_CAN_Interface](https://github.com/PhilippFux/ESP32_CAN_Interface) - Wireless CAN-Interface for the ESP32 which uses the cannelloni protocol to send CAN-Frames via UDP over an Wi-Fi tunnel.
 * [esp32_canbus_gateway](https://github.com/vigoballak/esp32_canbus_gateway) - CAN module on esp32 + tja1050 coded on micropython.
 * [esp32-cantroller](https://github.com/neg2led/esp32-cantroller) - ESP32-S2-WROVER/WROOM based CANBUS controller thingy.
 * [esp32-canbus-logger](https://github.com/scipioni/esp32-canbus-logger) - CAN bus logger on uSD-card based on ESP32.
 * 🔝[ESP32_CANViewer](https://github.com/Cellgalvano/ESP32_CANViewer) -  ESP32 based CAN interface for your webbrowser.
 * [esp-idf-can2http](https://github.com/nopnop2002/esp-idf-can2http) -  CANbus to http bridge using ESP32.
 * [esp32-obd2-emulator](https://github.com/limiter121/esp32-obd2-emulator) - Open-source OBD-II emulator based on an ESP32 + CAN transceiver IC, controllable via WiFi through a simple web UI (or via API).
+* [ESP32RET](https://github.com/collin80/ESP32RET) - CAN Reverse engineering tool for ESP32 based boards (unmaintained).
+* [ESP32S3RET](https://github.com/MagnusThome/ESP32S3RET) - CAN Reverse engineering tool for ESP32-S3 based boards.
+* [esp32_obd2](https://github.com/MagnusThome/esp32_obd2) - Simplified OBD2 layer to run on top of the esp32_can library that supports the newer ESP32-S3 (Arduino library).
+* [ESP32_OBD2_Emulator](https://github.com/MagnusThome/ESP32_OBD2_Emulator) - Simple OBD2 car emulator which runs on ESP32-S3 (replies to all OBD2 requests with dummy data).
 * [RejsaCAN-ESP32](https://github.com/MagnusThome/RejsaCAN-ESP32) - ESP32-S3 board with CAN interface.
+* [RejsaCAN-ESP32-C6](https://github.com/MagnusThome/RejsaCAN-ESP32/tree/main/Code%20Examples/RejsaCAN%20v6.x%20-%20ESP32-C6%20-%20DUAL%20CAN%20self%20test) - example code that is tested and runs on the new ESP32-C6 that has TWO built in CAN controllers.
+
 
 ### SBC
 **SBC** - Single Board Computers.