Merge pull request #9273 from iNavFlight/dzikuvx-speedybee-f405-mini

Speedybee F405 mini

src/main/target/SPEEDYBEEF405MINI/CMakeLists.txt

@@ -0,0 +1,2 @@
+target_stm32f405xg(SPEEDYBEEF405MINI)
+target_stm32f405xg(SPEEDYBEEF405MINI_6OUTPUTS)

src/main/target/SPEEDYBEEF405MINI/config.c

@@ -0,0 +1,37 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "fc/fc_msp_box.h"
+
+#include "io/piniobox.h"
+#include "io/serial.h"
+
+void targetConfiguration(void)
+{
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART2)].functionMask = FUNCTION_RX_SERIAL;
+
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART5)].functionMask = FUNCTION_ESCSERIAL;
+
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].functionMask = FUNCTION_MSP;
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].msp_baudrateIndex = BAUD_115200;
+
+    pinioBoxConfigMutable()->permanentId[0] = BOXARM;
+}

src/main/target/SPEEDYBEEF405MINI/target.c

@@ -0,0 +1,46 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM4, CH1, PB6, TIM_USE_MC_MOTOR  | TIM_USE_FW_MOTOR,   1, 0), // S1
+    DEF_TIM(TIM4, CH2, PB7, TIM_USE_MC_MOTOR  | TIM_USE_FW_MOTOR,   1, 0), // S2
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_MC_MOTOR  | TIM_USE_FW_SERVO,   1, 0), // S3
+    DEF_TIM(TIM3, CH3, PB0, TIM_USE_MC_MOTOR  | TIM_USE_FW_SERVO,   1, 0), // S4
+
+#ifdef SPEEDYBEEF405MINI_6OUTPUTS
+    DEF_TIM(TIM12,  CH1,    PB14,   TIM_USE_MC_MOTOR | TIM_USE_MC_SERVO | TIM_USE_FW_SERVO,     1, 0), // CAM_CTRL
+    DEF_TIM(TIM1,   CH1,    PA8,    TIM_USE_MC_MOTOR | TIM_USE_MC_SERVO | TIM_USE_FW_SERVO,     0, 0), // LED
+#else
+    DEF_TIM(TIM12,  CH1,    PB14,   TIM_USE_ANY,                                                1, 0), // CAM_CTRL
+    DEF_TIM(TIM1,   CH1,    PA8,    TIM_USE_LED,                                                0, 0), // LED
+#endif
+
+    DEF_TIM(TIM5, CH3, PA2, TIM_USE_ANY,                            0, 0), //TX2  softserial1_Tx
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);

src/main/target/SPEEDYBEEF405MINI/target.h

@@ -0,0 +1,186 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "SF4M"
+#define USBD_PRODUCT_STRING     "SPEEDYBEEF405MINI"
+
+#define LED0                    PC13
+
+#define BEEPER                  PC15
+#define BEEPER_INVERTED
+
+/*
+ * SPI Buses
+ */
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN   	    PC2
+#define SPI2_MOSI_PIN   	    PC3
+
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PB3
+#define SPI3_MISO_PIN   	    PB4
+#define SPI3_MOSI_PIN   	    PB5
+
+/*
+ * I2C
+ */
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+/*
+ * Serial
+ */
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PA2
+#define UART2_RX_PIN            PA3
+
+#define USE_UART3
+#define UART3_TX_PIN            PC10
+#define UART3_RX_PIN            PC11
+
+#define USE_UART4 //Internally routed to BLE
+#define UART4_TX_PIN            PA0
+#define UART4_RX_PIN            PA1 
+
+#define USE_UART5
+#define UART5_TX_PIN            PC12
+#define UART5_RX_PIN            PD2
+
+#define USE_UART6
+#define UART6_TX_PIN            PC6
+#define UART6_RX_PIN            PC7
+
+#define USE_SOFTSERIAL1
+#define SOFTSERIAL_1_TX_PIN      PA2
+#define SOFTSERIAL_1_RX_PIN      PA2
+
+#define SERIAL_PORT_COUNT       8
+
+/*
+ * Gyro
+ */
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN      CW270_DEG
+#define ICM42605_CS_PIN         PA4
+#define ICM42605_SPI_BUS        BUS_SPI1
+
+/*
+ * Other
+ */
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+#define USE_BARO_DPS310
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_AK8975
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+#define USE_MAG_MAG3110
+#define USE_MAG_LIS3MDL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C1
+#define PITOT_I2C_BUS           BUS_I2C1
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+
+/*
+ * OSD
+ */
+#define USE_MAX7456
+#define MAX7456_CS_PIN          PB12
+#define MAX7456_SPI_BUS         BUS_SPI2
+
+/*
+ * Blackbox
+ */
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define M25P16_SPI_BUS          BUS_SPI3
+#define M25P16_CS_PIN           PC14
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define SERIALRX_UART           SERIAL_PORT_USART2
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+
+#define ADC_CHANNEL_1_PIN           PC0
+#define ADC_CHANNEL_2_PIN           PC1
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_2
+
+// *************** PINIO ***************************
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN                  PB11 // RF Switch
+#define PINIO1_FLAGS                PINIO_FLAGS_INVERTED
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN                  PA8
+
+#define DEFAULT_FEATURES        (FEATURE_OSD | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TX_PROF_SEL | FEATURE_BLACKBOX)
+#define CURRENT_METER_SCALE     250
+#define CURRENT_METER_OFFSET    0
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+
+#ifdef SPEEDYBEEF405MINI_6OUTPUTS
+
+#define MAX_PWM_OUTPUT_PORTS        6
+
+#else
+
+#define MAX_PWM_OUTPUT_PORTS        4
+
+#endif
+
+#define USE_DSHOT
+#define USE_SERIALSHOT
+#define USE_ESC_SENSOR