Update the master repo #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Use generic config_init callback also for KSZ8021 and KSZ8031. This has been avoided this far due to commit b838b4a ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY becomes unresponsive if the broadcast-disable flag is set before configuring the clock mode. Turns out that the problem seemingly worked-around by the above mentioned commit was really due to a hardware-configuration issue, where the PHY was in fact strapped to address 3 rather than 0. Tested-by: Bruno Thomsen <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
…rnel/git/deller/parisc-linux Pull parisc build fix from Helge Deller: "This unbreaks the kernel compilation on parisc with gcc-4.9" * 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix out-of-register compiler error in ldcw inline assembler function
This property is no longer used in the code yet the code looks for it in the device tree. It does not cause an error if it's not in the tree. Signed-off-by: Kedareswara rao Appana <[email protected]> Signed-off-by: David S. Miller <[email protected]>
After commit d7480fd ("neigh: remove dynamic neigh table registration support"), this field is not used anymore. CC: Cong Wang <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The second init_completion call should be a reinit_completion here. patch is against 3.18.0 linux-next Signed-off-by: Nicholas Mc Guire <[email protected]> Signed-off-by: David S. Miller <[email protected]>
GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert <[email protected]> CC: Joe Stringer <[email protected]> CC: Eric Dumazet <[email protected]> CC: Hayes Wang <[email protected]> Signed-off-by: Jesse Gross <[email protected]> Acked-by: Tom Herbert <[email protected]> Fixes: 04ffcb2 ("net: Add ndo_gso_check") Tested-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
….org/pub/scm/linux/kernel/git/kvalo/wireless-drivers o Paul made a Kconfig dependency fix to ipw2200, it was not possible to enable that driver because Wireless Extensions is now disabled by default. o Mika fixed brcmfmac not to crash when platform data is not populated o Emmanuel provided few fixes to iwlwifi, he says: "I have here new device IDs and a fix for double free bug I introduced. I also fix an issue with the RFKILL interrupt - the HW needs us to ACK the interrupt again after we reset it. Liad fixes an issue with the firmware debugging infrastructure. While working on torture scenarios of firmware restarts, Eliad found an issue which he fixed." Signed-off-by: David S. Miller <[email protected]>
…nel/git/bluetooth/bluetooth Johan Hedberg says: ==================== Here's one more bluetooth pull request for 3.19. We've got two fixes: - Fix for accepting connections with old user space versions of BlueZ - Fix for Bluetooth controllers that don't have a public address Both of these are regressions that were introduced in 3.17, so the appropriate Cc: stable annotations are provided. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
In one of the places (ll_md_blocking_ast()) we had open-coded !is_root_inode(inode) and replaced it with is_root_inode(inode). See the last chunk of f76c23: - inode != inode->i_sb->s_root->d_inode) + is_root_inode(inode)) should've been + !is_root_inode(inode)) obviously... Signed-off-by: Al Viro <[email protected]>
Prevent BUG or corrupted file systems after the following: mkfs.ext4 /dev/vdc 100M mount -t ext4 -o sb=40961 /dev/vdc /vdc resize2fs /dev/vdc We previously prevented online resizing using the old resize ioctl. Move the code to ext4_resize_begin(), so the check applies for all of the resize ioctl's. Reported-by: Maxim Malkov <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
The new name is more expressive - this isn't a generic unbind function but rather only a little undo helper for use only in netlink_bind(). Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
There's no point to force the caller to know about the internal genl_sock to use inside struct net, just have them pass the network namespace. This doesn't really change code generation since it's an inline, but makes the caller less magic - there's never any reason to pass another socket. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The code is now confusing to read - first in one function down (netlink_remove) any group subscriptions are implicitly removed by calling __sk_del_bind_node(), but the subscriber database is only updated far later by calling netlink_update_listeners(). Move the latter call to just after removal from the list so it is easier to follow the code. This also enables moving the locking inside the kernel-socket conditional, which improves the normal socket destruction path. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Currently, netlink_unbind() is only called when the socket explicitly unbinds, which limits its usefulness (luckily there are no users of it yet anyway.) Call netlink_unbind() also when a socket is released, so it becomes possible to track listeners with this callback and without also implementing a netlink notifier (and checking netlink_has_listeners() in there.) Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
In order to make the newly fixed multicast bind/unbind functionality in generic netlink, pass them down to the appropriate family. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Johannes Berg says: ==================== netlink/genetlink cleanups & multicast improvements I'm looking at using the multicast group functionality in a way that would benefit from knowing when there are subscribers to avoid collecting the required data when there aren't any. During this I noticed that the unbind for multicast groups doesn't actually work - it's never called when sockets are closed. Luckily, nobody actually uses the functionality. While looking at the code trying to find why it's not called and where the multicast listeners are actually removed, I found the potential cleanup in patch 3. Patch 2 also has a cleanup for a generic netlink API in this area. ==================== Signed-off-by: David S. Miller <[email protected]>
In __bond_release_one(), when the interface is not a slave or not a slave of "this" master, it log error message. The message actually should be a debug message matching what bond_enslave() does. Signed-off-by: Wengang Wang <[email protected]> Acked-by: Ding Tianhong <[email protected]> Signed-off-by: Andy Gospodarek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
For linux-3.18.0 The driver lacks pci_disable_device in error handling code of ne2k_pci_init_one, so the device enabled by pci_enable_device is not disabled when errors occur. This patch fixes this problem. Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Netlink families can exist in multiple namespaces, and for the most part multicast subscriptions are per network namespace. Thus it only makes sense to have bind/unbind notifications per network namespace. To achieve this, pass the network namespace of a given client socket to the bind/unbind functions. Also do this in generic netlink, and there also make sure that any bind for multicast groups that only exist in init_net is rejected. This isn't really a problem if it is accepted since a client in a different namespace will never receive any notifications from such a group, but it can confuse the family if not rejected (it's also possible to silently (without telling the family) accept it, but it would also have to be ignored on unbind so families that take any kind of action on bind/unbind won't do unnecessary work for invalid clients like that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The commit 34a1cd6, "x86: vmx: move some vmx setting from vmx_init() to hardware_setup()", tried to refactor some codes specific to vmx hardware setting into hardware_setup(), but some msr writing should depend on our previous setting condition like enable_apicv, enable_ept and so on. Reported-by: Jamie Heilman <[email protected]> Tested-by: Jamie Heilman <[email protected]> Signed-off-by: Tiejun Chen <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Since most virtual machines raise this message once, it is a bit annoying. Make it KERN_DEBUG severity. Cc: [email protected] Fixes: 7a2e8aa Signed-off-by: Paolo Bonzini <[email protected]>
…el/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a couple of fixes for the new Intel Skylake HD-audio support" * tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: apply the Seperate stream_tag for Skylake ALSA: hda_controller: Separate stream_tag for input and output streams.
The successive init_completion calls should be reinit_completion calls. Signed-off-by: Nicholas Mc Guire <[email protected]> Acked-by: Helge Deller <[email protected]> Tested-by: Helge Deller <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
Before commit 0e60b07 (kvm: change memslot sorting rule from size to GFN, 2014-12-01), the memslots' sorting key was npages, meaning that a valid memslot couldn't have its sorting key equal to zero. On the other hand, a valid memslot can have base_gfn == 0, and invalid memslots are identified by base_gfn == npages == 0. Because of this, commit 0e60b07 broke the invariant that invalid memslots are at the end of the mslots array. When a memslot with base_gfn == 0 was created, any invalid memslot before it were left in place. This can be fixed by changing the insertion to use a ">=" comparison instead of "<=", but some care is needed to avoid breaking the case of deleting a memslot; see the comment in update_memslots. Thanks to Tiejun Chen for posting an initial patch for this bug. Reported-by: Jamie Heilman <[email protected]> Reported-by: Andy Lutomirski <[email protected]> Tested-by: Jamie Heilman <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Modifying a non-existent slot is not allowed. Also check that the first loop doesn't move a deleted slot beyond the used part of the mslots array. Signed-off-by: Paolo Bonzini <[email protected]>
Commit "amdkfd: use sizeof(long) granularity for the pasid bitmask" calculated the number of longs it will need, but ended up allocating that number of bytes rather than longs. Fix that silly error and allocate the amount of data really required. Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
…/git/viro/vfs Pull vfs fix from Al Viro: "An embarrassing bug in lustre patches from this cycle ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] braino in "lustre: use is_root_inode()"
Pull KVM fixes from Paolo Bonzini: "The important fixes are for two bugs introduced by the merge window. On top of this, add a couple of WARN_ONs and stop spamming dmesg on pretty much every boot of a virtual machine" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: warn on more invariant breakage kvm: fix sorting of memslots with base_gfn == 0 kvm: x86: drop severity of "generation wraparound" message kvm: x86: vmx: reorder some msr writing
Wire up sys_execveat(). This passes the selftests for the system call. Check success of execveat(3, '../execveat', 0)... [OK] Check success of execveat(5, 'execveat', 0)... [OK] Check success of execveat(6, 'execveat', 0)... [OK] Check success of execveat(-100, '/home/pranith/linux/...ftests/exec/execveat', 0)... [OK] Check success of execveat(99, '/home/pranith/linux/...ftests/exec/execveat', 0)... [OK] Check success of execveat(8, '', 4096)... [OK] Check success of execveat(17, '', 4096)... [OK] Check success of execveat(9, '', 4096)... [OK] Check success of execveat(14, '', 4096)... [OK] Check success of execveat(14, '', 4096)... [OK] Check success of execveat(15, '', 4096)... [OK] Check failure of execveat(8, '', 0) with ENOENT... [OK] Check failure of execveat(8, '(null)', 4096) with EFAULT... [OK] Check success of execveat(5, 'execveat.symlink', 0)... [OK] Check success of execveat(6, 'execveat.symlink', 0)... [OK] Check success of execveat(-100, '/home/pranith/linux/...xec/execveat.symlink', 0)... [OK] Check success of execveat(10, '', 4096)... [OK] Check success of execveat(10, '', 4352)... [OK] Check failure of execveat(5, 'execveat.symlink', 256) with ELOOP... [OK] Check failure of execveat(6, 'execveat.symlink', 256) with ELOOP... [OK] Check failure of execveat(-100, '/home/pranith/linux/tools/testing/selftests/exec/execveat.symlink', 256) with ELOOP... [OK] Check success of execveat(3, '../script', 0)... [OK] Check success of execveat(5, 'script', 0)... [OK] Check success of execveat(6, 'script', 0)... [OK] Check success of execveat(-100, '/home/pranith/linux/...elftests/exec/script', 0)... [OK] Check success of execveat(13, '', 4096)... [OK] Check success of execveat(13, '', 4352)... [OK] Check failure of execveat(18, '', 4096) with ENOENT... [OK] Check failure of execveat(7, 'script', 0) with ENOENT... [OK] Check success of execveat(16, '', 4096)... [OK] Check success of execveat(16, '', 4096)... [OK] Check success of execveat(4, '../script', 0)... [OK] Check success of execveat(4, 'script', 0)... [OK] Check success of execveat(4, '../script', 0)... [OK] Check failure of execveat(4, 'script', 0) with ENOENT... [OK] Check failure of execveat(5, 'execveat', 65535) with EINVAL... [OK] Check failure of execveat(5, 'no-such-file', 0) with ENOENT... [OK] Check failure of execveat(6, 'no-such-file', 0) with ENOENT... [OK] Check failure of execveat(-100, 'no-such-file', 0) with ENOENT... [OK] Check failure of execveat(5, '', 4096) with EACCES... [OK] Check failure of execveat(5, 'Makefile', 0) with EACCES... [OK] Check failure of execveat(11, '', 4096) with EACCES... [OK] Check failure of execveat(12, '', 4096) with EACCES... [OK] Check failure of execveat(99, '', 4096) with EBADF... [OK] Check failure of execveat(99, 'execveat', 0) with EBADF... [OK] Check failure of execveat(8, 'execveat', 0) with ENOTDIR... [OK] Invoke copy of 'execveat' via filename of length 4093: Check success of execveat(19, '', 4096)... [OK] Check success of execveat(5, 'xxxxxxxxxxxxxxxxxxxx...yyyyyyyyyyyyyyyyyyyy', 0)... [OK] Invoke copy of 'script' via filename of length 4093: Check success of execveat(20, '', 4096)... [OK] /bin/sh: 0: Can't open /dev/fd/5/xxxxxxx(... a long line of x's and y's, 0)... [OK] Check success of execveat(5, 'xxxxxxxxxxxxxxxxxxxx...yyyyyyyyyyyyyyyyyyyy', 0)... [OK] Tested on a 32-bit powerpc system. Signed-off-by: Pranith Kumar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only cleared iff debug_locks is active. This exposes a race to other users of the field where the mutex->owner may be still set to a stale value, potentially upsetting mutex_spin_on_owner() among others. References: https://bugs.freedesktop.org/show_bug.cgi?id=87955 Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Davidlohr Bueso <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Linus Torvalds <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
This is a static checker fix. We write some binary settings to the sysfs file. One of the settings is the "->startup_profile". There isn't any checking to make sure it fits into the pyra->profile_settings[] array in the profile_activated() function. I added a check to pyra_sysfs_write_settings() in both places because I wasn't positive that the other callers were correct. Cc: <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled image failed to compile with the following error: arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function) It seems that '80d6b0c ARM: mm: allow text and rodata sections to be read-only' and 'ded9477 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE' commits crossed. 80d6b0c uses PMD_SECT_RDONLY macro but ded9477 renames it and uses software bits L_PMD_SECT_RDONLY instead. Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as ded9477 does in another places. Signed-off-by: Victor Kamensky <[email protected]> Acked-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <[email protected]>: mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed memcg: fix destination cgroup leak on task charges migration mm: memcontrol: switch soft limit default back to infinity mm/debug_pagealloc: remove obsolete Kconfig options vfs: renumber FMODE_NONOTIFY and add to uniqueness check arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file MAINTAINERS: update rydberg's addresses mm: protect set_page_dirty() from ongoing truncation mm: prevent endless growth of anon_vma hierarchy exit: fix race between wait_consider_task() and wait_task_zombie() ocfs2: remove bogus check in dlm_process_recovery_data
…/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "None of these are huge, but my commit does fix a regression from 3.18 that could cause lost files during log replay. This also adds Dave Sterba to the list of Btrfs maintainers. It doesn't mean we're doing things differently, but Dave has really been helping with the maintainer workload for years" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't delay inode ref updates during log replay Btrfs: correctly get tree level in tree_backref_for_extent Btrfs: call inode_dec_link_count() on mkdir error path Btrfs: abort transaction if we don't find the block group Btrfs, scrub: uninitialized variable in scrub_extent_for_parity() Btrfs: add more maintainers
…/git/sage/ceph-client Pull two Ceph fixes from Sage Weil: "These are both pretty trivial: a sparse warning fix and size_t printk thing" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix sparse endianness warnings ceph: use %zu for len in ceph_fill_inline_data()
Pull two nfsd bugfixes from Bruce Fields. * 'for-3.19' of git://linux-nfs.org/~bfields/linux: rpc: fix xdr_truncate_encode to handle buffer ending on page boundary nfsd: fix fi_delegees leak when fi_had_conflict returns true
…kernel/git/jwessel/kgdb
Pull kgdb/kdb fixes from Jason Wessel:
"These have been around since 3.17 and in kgdb-next for the last 9
weeks and some will go back to -stable.
Summary of changes:
Cleanups
- kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE
Fixes
- kgdb/kdb: Allow access on a single core, if a CPU round up is
deemed impossible, which will allow inspection of the now "trashed"
kernel
- kdb: Add enable mask for the command groups
- kdb: access controls to restrict sensitive commands"
* tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kernel/debug/debug_core.c: Logging clean-up
kgdb: timeout if secondary CPUs ignore the roundup
kdb: Allow access to sensitive commands to be restricted by default
kdb: Add enable mask for groups of commands
kdb: Categorize kdb commands (similar to SysRq categorization)
kdb: Remove KDB_REPEAT_NONE flag
kdb: Use KDB_REPEAT_* values as flags
kdb: Rename kdb_register_repeat() to kdb_register_flags()
kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags
kdb: Remove currently unused kdbtab_t->cmd_flags
…git/arm64/linux Pull arm64 fixes from Will Deacon: "Here is a handful of minor arm64 fixes discovered and fixed over the Christmas break. The main part is adding some missing #includes that we seem to be getting transitively but have started causing problems in -next. - Fix early mapping fixmap corruption by EFI runtime services - Fix __NR_compat_syscalls off-by-one - Add missing sanity checks for some 32-bit registers - Add some missing #includes which we get transitively - Remove unused prepare_to_copy() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: add missing call to early_ioremap_reset() arm64: fix missing asm/io.h include in kernel/smp_spin_table.c arm64: fix missing asm/alternative.h include in kernel/module.c arm64: fix missing linux/bug.h include in asm/arch_timer.h arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h arm64: sanity checks: add missing AArch32 registers arm64: Remove unused prepare_to_copy() arm64: Correct __NR_compat_syscalls for bpf
Pull drm fixes from Dave Airlie: "I'm briefly working between holidays and LCA, so this is close to a couple of weeks of fixes, Two sets of amdkfd fixes, this is a new feature this kernel, and this pull fixes a few issues since it got merged, ordering when built-in to kernel and also the iommu vs gpu ordering patch, it also reworks the ioctl before the initial release. Otherwise: - radeon: some misc fixes all over, hdmi, 4k, dpm - nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix - i915: power fixes, revert VGACNTR patch Probably be quiteer next week since I'll be at LCA anyways" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits) drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() drm/amdkfd: reformat IOCTL definitions to drm-style drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() drm/radeon: integer underflow in radeon_cp_dispatch_texture() drm/radeon: adjust default bapm settings for KV drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw drm/radeon: fix sad_count check for dce3 drm/radeon: KV has three PPLLs (v2) drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS) drm/radeon: Init amdkfd only if it was compiled amdkfd: actually allocate longs for the pasid bitmask drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP drm/nv4c/mc: disable msi drm/nouveau/fb/ram/mcp77: enable NISO poller drm/nouveau/fb/ram/mcp77: use carveout reg to determine size drm/nouveau/fb/ram/mcp77: subclass nouveau_ram drm/nouveau: wake up the card if necessary during gem callbacks drm/nouveau/device: Add support for GK208B, resolves bug 86935 drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate drm/nouveau/bios: fix oops on pre-nv50 chipsets ...
…/git/jikos/hid Pull HID updates from Jiri Kosina: - bounds checking fixes in logitech and roccat drivers, from Peter Wu and Dan Carpenter - double-kfree fix in i2c-hid driver on bus shutdown, from Mika Westerberg - a couple of various small driver fixes - a few device id additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: roccat: potential out of bounds in pyra_sysfs_write_settings() HID: Add a new id 0x501a for Genius MousePen i608X HID: logitech-hidpp: prefix the name with "Logitech" HID: logitech-hidpp: avoid unintended fall-through HID: Allow HID_BATTERY_STRENGTH to be enabled HID: i2c-hid: Do not free buffers in i2c_hid_stop() HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard HID: logitech-hidpp: check WTP report length HID: logitech-dj: check report length
…el/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All a few small regression or stable fixes: a Nvidia HDMI ID addition, a regression fix for CAIAQ stream count, a typo fix for GPIO setup with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix" * tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fireworks: fix an endianness bug for transaction length ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs ALSA: snd-usb-caiaq: fix stream count check
…it/jejb/scsi Pull SCSI fix from James Bottomley: "Just one fix: a qlogic busy wait regression" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla2xxx: fix busy wait regression
Pull VFIO fix from Alex Williamson: "Fix PCI header check in vfio_pci_probe() (Wei Yang)" * tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix the check on pci device type in vfio_pci_probe()
…g locking fixes Signed-off-by: Ingo Molnar <[email protected]>
Commit fee7e49 ("mm: propagate error from stack expansion even for guard page") made sure that we return the error properly for stack growth conditions. It also theorized that counting the guard page towards the stack limit might break something, but also said "Let's see if anybody notices". Somebody did notice. Apparently android-x86 sets the stack limit very close to the limit indeed, and including the guard page in the rlimit check causes the android 'zygote' process problems. So this adds the (fairly trivial) code to make the stack rlimit check be against the actual real stack size, rather than the size of the vma that includes the guard page. Reported-and-tested-by: Chih-Wei Huang <[email protected]> Cc: Jay Foad <[email protected]> Cc: [email protected] # to match back-porting of fee7e49 Signed-off-by: Linus Torvalds <[email protected]>
Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel
BUG at mm/rmap.c:399!") caused by commit 7a3ef20 ("mm: prevent
endless growth of anon_vma hierarchy")
Anon_vma_clone() is usually called for a copy of source vma in
destination argument. If source vma has anon_vma it should be already
in dst->anon_vma. NULL in dst->anon_vma is used as a sign that it's
called from anon_vma_fork(). In this case anon_vma_clone() finds
anon_vma for reusing.
Vma_adjust() calls it differently and this breaks anon_vma reusing
logic: anon_vma_clone() links vma to old anon_vma and updates degree
counters but vma_adjust() overrides vma->anon_vma right after that. As
a result final unlink_anon_vmas() decrements degree for wrong anon_vma.
This patch assigns ->anon_vma before calling anon_vma_clone().
Signed-off-by: Konstantin Khlebnikov <[email protected]>
Reported-and-tested-by: Chris Clayton <[email protected]>
Reported-and-tested-by: Oded Gabbay <[email protected]>
Reported-and-tested-by: Chih-Wei Huang <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Daniel Forrest <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: [email protected] # to match back-porting of 7a3ef20
Signed-off-by: Linus Torvalds <[email protected]>
…cm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "A liblockdep fix and a mutex_unlock() mutex-debugging fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Always clear owner field upon mutex_unlock() tools/liblockdep: Fix debug_check thinko in mutex destroy
…linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also some kernel side fixes: uncore PMU driver fix, user regs sampling fix and an instruction decoder fix that unbreaks PEBS precise sampling" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes perf/x86_64: Improve user regs sampling perf: Move task_pt_regs sampling into arch code x86: Fix off-by-one in instruction decoder perf hists browser: Fix segfault when showing callchain perf callchain: Free callchains when hist entries are deleted perf hists: Fix children sort key behavior perf diff: Fix to sort by baseline field by default perf list: Fix --raw-dump option perf probe: Fix crash in dwarf_getcfi_elf perf probe: Fix to fall back to find probe point in symbols perf callchain: Append callchains only when requested perf ui/tui: Print backtrace symbols when segfault occurs perf report: Show progress bar for output resorting
…/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: group scheduling corner case fix, two deadline scheduler fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs system fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group() sched/deadline: Avoid double-accounting in case of missed deadlines sched/deadline: Fix migration of SCHED_DEADLINE tasks sched: Fix odd values in effective_load() calculations sched, fanotify: Deal with nested sleeps sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation
…inux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix with certain odd memory mappings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Use asm volatile in __getcpu x86/build: Clean auto-generated processor feature files x86: Fix mkcapflags.sh bash-ism x86: Fix step size adjustment during initial memory mapping x86_64, vdso: Fix the vdso address randomization algorithm
Pull ARM fixes from Russell King: "Three small fixes from over the Christmas period, and wiring up the new execveat syscall for ARM" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region ARM: 8249/1: mm: dump: don't skip regions ARM: wire up execveat syscall
irogerthat
pushed a commit
that referenced
this pull request
Jan 12, 2015
The clock type mix is a kind of clock combines "div" and "mux". This kind of clock can not allow to change div first then mux or change mux first or div. The reason is 1. Some clock has frequency change bit. Each time want to change the frequency, there are some operations based on this bit, and these operations are time-cost. Seperating div and mux change will make the process longer, and waste more time. 2. Seperting the div and mux may generate middle clock that the peripharals do not support. It may make the peripharals hang. There are three kinds of this type of clock in all SOCes. 1. The clock has bit to trigger the frequency change. 2. Same as #1, but the operations for the bit is different 3. Do not have frequency change bit. So this type of clock has implemented the callbacks ->determine_rate ->set_rate_and_parent These callbacks can help to change the div and mux together. Signed-off-by: Chao Xie <[email protected]> Acked-by: Haojian Zhuang <[email protected]> Signed-off-by: Michael Turquette <[email protected]>
irogerthat
pushed a commit
that referenced
this pull request
Jan 12, 2015
Add assignment of the variant_regs field which is missing in commit a5a5687 ("ASoC: samsung: add support for exynos7 I2S controller"). Without this attempting to probe the secondary DAI fails with an error like: [ 1.763026] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 1.780895] pgd = c0004000 [ 1.783606] [0000000c] *pgd=00000000 [ 1.838255] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1.843514] Modules linked in: [ 1.846558] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc1-00009-g5dcb01e-dirty #1521 [ 1.854887] task: ee00a800 ti: ee088000 task.ti: ee088000 [ 1.860284] PC is at i2s_txctrl+0x40/0x2d4 [ 1.864350] LR is at i2s_txctrl+0x28/0x2d4 [ 1.868428] pc : [<c036ffd4>] lr : [<c036ffbc>] psr: 60000153 [ 1.868428] sp : ee089dc0 ip : 00000000 fp : ee21f000 [ 1.879883] r10: 00000000 r9 : ee21fb00 r8 : c06406c4 [ 1.885091] r7 : ee21fb00 r6 : 00000000 r5 : f00f6000 r4 : ed943410 [ 1.891601] r3 : 0000016c r2 : c0464550 r1 : c055cef8 r0 : ed943610 [ 1.898113] Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.905490] Control: 10c5387d Table: 4000404a DAC: 00000015 [ 1.911218] Process swapper/0 (pid: 1, stack limit = 0xee088240) [ 1.917208] Stack: (0xee089dc0 to 0xee08a000) ... [ 2.068431] [<c036ffd4>] (i2s_txctrl) from [<c03719fc>] (samsung_i2s_dai_probe+0xb8/0x450) [ 2.076676] [<c03719fc>] (samsung_i2s_dai_probe) from [<c03607e0>] (snd_soc_register_card+0xd98/0x1348) [ 2.086044] [<c03607e0>] (snd_soc_register_card) from [<c03726e4>] (odroidx2_audio_probe+0xa8/0x11c) [ 2.095160] [<c03726e4>] (odroidx2_audio_probe) from [<c0249dd0>] (platform_drv_probe+0x48/0xa4) [ 2.103922] [<c0249dd0>] (platform_drv_probe) from [<c0248988>] (driver_probe_device+0x10c/0x22c) [ 2.112773] [<c0248988>] (driver_probe_device) from [<c0248b34>] (__driver_attach+0x8c/0x90) [ 2.121192] [<c0248b34>] (__driver_attach) from [<c02471c8>] (bus_for_each_dev+0x54/0x88) [ 2.129352] [<c02471c8>] (bus_for_each_dev) from [<c0248188>] (bus_add_driver+0xd4/0x1d0) [ 2.137510] [<c0248188>] (bus_add_driver) from [<c024915c>] (driver_register+0x78/0xf4) [ 2.145499] [<c024915c>] (driver_register) from [<c0008924>] (do_one_initcall+0x80/0x1b8) [ 2.153670] [<c0008924>] (do_one_initcall) from [<c05b7d40>] (kernel_init_freeable+0xfc/0x1c8) [ 2.162260] [<c05b7d40>] (kernel_init_freeable) from [<c04146c0>] (kernel_init+0x8/0xec) [ 2.170330] [<c04146c0>] (kernel_init) from [<c000e7f8>] (ret_from_fork+0x14/0x3c) [ 2.177873] Code: e594000 e59f128c e59f228c e2800010 (e59c700c) Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Mark Brown <[email protected]>
irogerthat
pushed a commit
that referenced
this pull request
Jan 12, 2015
Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: <IRQ> [<ffffffff815e237b>] dump_stack+0x19/0x1b kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40 kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70 kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20 kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100 kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0 kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc <[email protected]> Cc: Stefan Assmann <[email protected]> Reported-by: Sunil Choudhary <[email protected]> Signed-off-by: Govindarajulu Varadarajan <[email protected]> Reviewed-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
irogerthat
pushed a commit
that referenced
this pull request
Jan 12, 2015
If ACPI _PPC changed notification happens before governor was initiated while kernel is booting, a NULL pointer dereference will be triggered: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 PGD 0 Oops: 0000 [#1] SMP ... ... RIP: 0010:[<ffffffff81470453>] [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 RSP: 0018:ffff881fcfbcfbb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff881fd11b3980 RCX: ffff88407fc20000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff881fd11b3980 RBP: ffff881fcfbcfbd8 R08: 0000000000000000 R09: 000000000000000f R10: ffffffff818068d0 R11: 0000000000000043 R12: 0000000000000004 R13: 0000000000000000 R14: ffffffff8196cae0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff881fffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000000018ae000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:3 (pid: 750, threadinfo ffff881fcfbce000, task ffff881fcf556400) Stack: ffff881fffc17d00 ffff881fcfbcfc18 ffff881fd11b3980 0000000000000000 ffff881fcfbcfc08 ffffffff81470d08 ffff881fd11b3980 0000000000000007 ffff881fcfbcfc18 ffff881fffc17d00 ffff881fcfbcfd28 ffffffff81472e9a Call Trace: [<ffffffff81470d08>] __cpufreq_set_policy+0x1b8/0x2e0 [<ffffffff81472e9a>] cpufreq_update_policy+0xca/0x150 [<ffffffff81472f20>] ? cpufreq_update_policy+0x150/0x150 [<ffffffff81324a96>] acpi_processor_ppc_has_changed+0x71/0x7b [<ffffffff81320bcd>] acpi_processor_notify+0x55/0x115 [<ffffffff812f9c29>] acpi_device_notify+0x19/0x1b [<ffffffff813084ca>] acpi_ev_notify_dispatch+0x41/0x5f [<ffffffff812f64a4>] acpi_os_execute_deferred+0x27/0x34 The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver were initiated, but cpufreq_governor wasn't and _PPC changed notification happened, __cpufreq_governor() was called within acpi_os_execute_deferred kernel thread context. To fix this panic issue, add pointer checking code in __cpufreq_governor() before pointer policy->governor is to be dereferenced. Signed-off-by: Ethan Zhao <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
irogerthat
pushed a commit
that referenced
this pull request
Jan 12, 2015
…ast_skb Eric Paris explains: Since kauditd_send_multicast_skb() gets called in audit_log_end(), which can come from any context (aka even a sleeping context) GFP_KERNEL can't be used. Since the audit_buffer knows what context it should use, pass that down and use that. See: https://lkml.org/lkml/2014/12/16/542 BUG: sleeping function called from invalid context at mm/slab.c:2849 in_atomic(): 1, irqs_disabled(): 0, pid: 885, name: sulogin 2 locks held by sulogin/885: #0: (&sig->cred_guard_mutex){+.+.+.}, at: [<ffffffff91152e30>] prepare_bprm_creds+0x28/0x8b #1: (tty_files_lock){+.+.+.}, at: [<ffffffff9123e787>] selinux_bprm_committing_creds+0x55/0x22b CPU: 1 PID: 885 Comm: sulogin Not tainted 3.18.0-next-20141216 torvalds#30 Hardware name: Dell Inc. Latitude E6530/07Y85M, BIOS A15 06/20/2014 ffff880223744f10 ffff88022410f9b8 ffffffff916ba529 0000000000000375 ffff880223744f10 ffff88022410f9e8 ffffffff91063185 0000000000000006 0000000000000000 0000000000000000 0000000000000000 ffff88022410fa38 Call Trace: [<ffffffff916ba529>] dump_stack+0x50/0xa8 [<ffffffff91063185>] ___might_sleep+0x1b6/0x1be [<ffffffff910632a6>] __might_sleep+0x119/0x128 [<ffffffff91140720>] cache_alloc_debugcheck_before.isra.45+0x1d/0x1f [<ffffffff91141d81>] kmem_cache_alloc+0x43/0x1c9 [<ffffffff914e148d>] __alloc_skb+0x42/0x1a3 [<ffffffff914e2b62>] skb_copy+0x3e/0xa3 [<ffffffff910c263e>] audit_log_end+0x83/0x100 [<ffffffff9123b8d3>] ? avc_audit_pre_callback+0x103/0x103 [<ffffffff91252a73>] common_lsm_audit+0x441/0x450 [<ffffffff9123c163>] slow_avc_audit+0x63/0x67 [<ffffffff9123c42c>] avc_has_perm+0xca/0xe3 [<ffffffff9123dc2d>] inode_has_perm+0x5a/0x65 [<ffffffff9123e7ca>] selinux_bprm_committing_creds+0x98/0x22b [<ffffffff91239e64>] security_bprm_committing_creds+0xe/0x10 [<ffffffff911515e6>] install_exec_creds+0xe/0x79 [<ffffffff911974cf>] load_elf_binary+0xe36/0x10d7 [<ffffffff9115198e>] search_binary_handler+0x81/0x18c [<ffffffff91153376>] do_execveat_common.isra.31+0x4e3/0x7b7 [<ffffffff91153669>] do_execve+0x1f/0x21 [<ffffffff91153967>] SyS_execve+0x25/0x29 [<ffffffff916c61a9>] stub_execve+0x69/0xa0 Cc: [email protected] #v3.16-rc1 Reported-by: Valdis Kletnieks <[email protected]> Signed-off-by: Richard Guy Briggs <[email protected]> Tested-by: Valdis Kletnieks <[email protected]> Signed-off-by: Paul Moore <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.