Arasan

Arasan is a chess engine, that is, a console-based program that plays the game of chess.

By itself, it has no graphical interface, but can be used together with interface programs such as Winboard and xboard. There is a separate Windows-only GUI for Arasan distributed with the Windows releases: it is not hosted on Github.

For communicating with a chess interface, Arasan supports either the standard CECP protocol (version 2) or the UCI protocol. CECP is the native protocol used by Winboard and xboard. UCI-compatible chess interfaces include ChessBase and Fritz. Arena, a free interface, supports both protocols.

Arasan is multi-platform (Windows, Linux, Mac OS, Unix) and supports multi-threading for higher performance.

Copyright, license

Copyright 1994-2024 by Jon Dart. All Rights Reserved.

Arasan is licensed under the MIT License. See the LICENSE file.

Program variants

Several different binaries for Arasan can be built. The default executable (arasanx-32 for 32-bit operating systems, or arasanx-64 for 64-bit ones) is designed to be runnable on most systems. Default x86 or x86_64 builds assume SSE2 instructions are available (these were introduced in 2000 with the Pentium IV).

Other program variants include:

1. arasanx-64-old - assumes no SIMD instructions, not even SSE2. Will run on very old x86 hardware.

2. arasanx-64-modern - requires a x86 processor with POPCNT, SSSE3 and SSE4.1 instructions (Intel Nehalem or later, i.e. 2008 era or more recent).

3. arasanx-64-avx2 - requires a more modern x86 processor with AVX2 instructions, as well as those required by the "modern" build. Recommended for AMD Excavator through Zen2 processors.

4. arasanx-64-avx2-bmi2 - requires a more modern x86 processor with AVX2 and BMI2 instructions, as well as those required by the "modern" build. Recommended for Intel Haswell or later processors and AMD processors on the Zen3 architecture (Nov. 2020) or later.

5. arasanx-64-avx512 - requires a modern x86 processor with AVX512 instructions (Intel Skylake X and Cannon Lake, or later), as well as those required by the "avx2" build.

6. arasanx-64-neon - ARM executable with support for NEON instruction set.

In addition it is possible to build a version with support for NUMA (Non- Uniform Memory Access) systems - generally these are large multi-CPU systems. NUMA-enabled versions of Arasan require the HWLOC library version 2.0 or higher: see https://www.open-mpi.org/software/hwloc/v2.0/.

Command-line switches

Arasanx recognizes the following command-line options:

• -a auto-loads the options from an arasan.rc file in the program directory (if present), and aslso (if present) from an arasan.rc in the user's home directory.

• -H: specifies the hash table size in bytes ('K', 'M', or 'G' can be used to indicate kilobytes, megabyates or gigabytes).

• -c: specifies the number of threads to use (default is 1).

• -r: specifies an option file (arasan.rc) to load on startup.

• -t: shows some debugging output in the UI window or log file. To enable debug output, you also need to use the "-debugMode true" switch if using xboard/Winboard, or the "debug=true" option if using Arasan as a UCI engine. You normally shouldn't need to turn this on.

• -tbpath: specifies the Syzygy tablepath path and enables use of tablebases. Under Windows, path components should be separated by ';', while under Linux or MacOS, they should be separated by ":".

• -ics: outputs additional info when playing on a chess server.

Note: when using Arasan with a GUI or other interface program, usually hash size and thread count are set in the interface. But the -H and -c switches, if specified on the arasanx command line, take precedence over those passed to Arasan via a GUI.

If the word "bench" is specified on the command line, then Arasan will run the bench command (for performance reporting) and then exit.

Option file (arasan.rc)

Formerly Arasan would auto-load options from an arasan.rc file. The engine would look for this file in the program's directory, and if present, Arasan will also read a file from the user's home directory:

• on Windows, from arasan.rc
• on MacOS or Linux, from .arasan.rc

The contents of these files will overwrite the one that is in the program directory.

This behavior has now changed. Now, by default, no options file is read and the program's options are entirely controlled by UCI or CECP commands.

To get the older behavior of auto-loading the .rc file, you can specify the -a flag on the command line. Alternatively the -r flag with a filename will read the options from the specified filename.

Option files are primarily useful for configuring Arasan when running it from the command line or from command-line tools. Generally, chess engine interfaces (especially GUIs such as Fritz or xboard) will have their own means of setting options, and they may set default options that differ from anything in an options file. Their settings override anything in an arasan.rc file. Therefore, using an option file with an engine GUI is not recommended, and that is why it is now disabled by default in the chess engine.

At present, Arasan utility programs still use the older method of auto-loading .rc files.

UCI Options

When used as a UCI engine, Arasan supports the following options:

• Hash - hash size in kilobytes
• Threads - number of threads to use
• Ponder - true to enable pondering (thinking on opponent's time)
• Contempt - followed by a number from -200 to 200. This is the inverse of the value of a draw in centipawns (1/100 pawn value). Negative values mean the opponent is higher rated, so a draw is desirable. Positive values mean the opponent is lower rated, so a draw should be avoided.
• Use tablebases - true to use tablebases, false to disable
• SyzygyUses50MoveRule - true to observe the 50 move draw rule when probing tablebases; false to have tablebase probes ignore the rule. Default is true.
• SyzygyProbeDepth - maximum depth to probe tablebases. Default is 4.
• SyzygyPath - path to the Syzygy tablebases. Multiple directories can be specified, separated by ':'.
• MultiPV - followed by a number. Number of distinct best lines to display. Default is 1.
• OwnBook - true or false. True to enable use of the Arasan book (book.bin) if installed. Default is true.
• BookPath - path to the Arasan book. Default is book.bin in the same directory as the Arasan engine executable.
• Book variety - value from 0 to 100, default 50. Higher values produce more variety in book move selection.
• Position learning - true to enable position learning (storing key position results in a file and later retrieving them).
• Learn file name - name & location of the file to store position learning data
• UCI_LimitStrength - true or false, default false. True to limit the engine playing strength.
• UCI_Elo - desired playing strength, settable from Elo 1000 to Elo 3450. This is only effective if UCI_LimitStrength is set true.
• Set processor affinity - for NUMA builds only. If set true, binds threads to cores.
• Move overhead - value settable from 0 to 1000. This is a value in milliseconds that will be subtraced from the time available to make a move. It helps Arasan account for network or interface delays in calculating its time usage.
• NNUE File - the name of the neural network file to load. Currently assumed to be in the same directory as the Arasan engine executable.

The defaults for many of these options are the values set in the arasan.rc file.

CECP options

Besides the standard option-setting commands such as "memory" and "egtpath," the following additional option settings are available in CECP mode:

• SyzygyUses50MoveRule - true to observe the 50 move draw rule when probing tablebases; false to have tablebase probes ignore the rule. Default is true.
• SyzygyProbeDepth - maximum depth to probe tablebases. Default is 4.
• Can resign - sets whether or not the engine can resign a game. Note: under UCI, the interface program is always in charge of resignation.
• Resign threshold - sets how bad the score must be before resignation. Only effective if "Can resign" is set true. Value is in centipawns (1/100 pawn) and is negative. So for example -500 means resign when down 5 pawns in score value.
• OwnBook - true to enable Arasan's native opening book, false to disable.
• BookPath - path to the Arasan book. Default is book.bin in the same directory as the Arasan engine executable.
• Book variety - value from 0 to 100, default 50. Higher values produce more variety in book move selection.
• Position learning - true to enable position learning (storing key position results in a file and later retrieving them).
• Learn file name - name & location of the file to store position learning data
• Strength - search strength, settable on a scale of 0 (weakest) to 100 (strongest)
• Set processor affinity - for NUMA builds only. If set true, binds threads to cores.
• Move overhead - value settable from 0 to 1000. This is a value in milliseconds that will be subtraced from the time available to make a move. It helps Arasan account for network or interface delays in calculating its time usage.
• NNUE File - the name of the neural network file to load. Currently assumed to be in the same directory as the Arasan engine executable.

Note: the defaults for all these options are taken from the values in arasan.rc, if that file is present.

Neural Network

Arasan now supports chess evaluation utilizing a neural network. The neural network file is external to the program and is loaded at runtime. The file name for the network can be specified using UCI or CECP options, or by setting the search.nnueFile option in the arasan.rc file. There is a default network filename set there. In the options, if no directory path is part of the option or a relative path is used, the file is assumed to be in or relative to the same directory as the Arasan executable.

Tablebases

Arasan supports Syzygy format compressed endgame tablebases. You can configure Arasan to use tablebases by editing the arasan.rc file, or by using a GUI that supports UCI or CECP option commands. Note that many chess GUIs will override the arasan.rc settings, and set their own defaults. So if using a GUI you should if possible set the tablebase path and related options in the GUI, not in the file.

The Arasan distribution does not come with any tablebase files. Syzygy tablebases can be downloaded from https://syzygy-tables.info/.

Programming and build information

See BUILD.md for compilation instructions. See the Programmer's Guide for additional technical information.

Related projects

Arasan relies on the following other projects, also authored by or modified by Jon Dart:

• Fathom, Syzygy tablebase probing code (fork of basil00/Fathom)
• nnue, Chess neural network reading code
• stats, Python module for SPRT computation (derived from glinscott/fishtest)

Additional information

Arasan's website hosts binaries and additional information related to Arasan.