Skip to content

A Dactyl mounting Cherry Ultra Low Profile switches :D

License

AGPL-3.0, Unknown licenses found

Licenses found

AGPL-3.0
LICENSE
Unknown
LICENSE-models
Notifications You must be signed in to change notification settings

jonboh/ulp-dactyl

 
 

Repository files navigation

ULP Dactyl

This repository has my last keyboard. The ULP Dactyl, that uses the Cherry Ultra Low Profile switches

ULP Dactyl

You can find out more about these switches in the Cherry_MX_ULP.

I bought the switches from Reichelt, they have both clicky and tactile variant.

You can find the PCBs I designed for the keyboard here. You should be able to order them in any pcb manufacturer like EuroCircuits or JLPCB. The diodes used in the PCBs are 1N4148W SOD323.

Regarding the model, lot of the features of the original dactyl manuform repository no longer work as I've focused on using just solidpython2 and I've hacked away wherever I needed.

It is forked from the wylders version because initially I just wanted to have a nice trackball. Then I went from MX switches to Choc ones and finally to ULP.

The assembly unfortunately can't be made modular, at least not in a normal FDM printer. Some of the things I tried include using columns in which to rest the pcbs. However this approach needed extremely tight tolerances that made printing almost impossible.

Finally I just settled for mounting the pcbs on the surface of the shell. Although it isn't strictly necessary you'll want to add a bit of glue on the bottom of the PCBs so they stay in place.

Depending on the tolerance of your printer you might want to have a bit of sanding paper to sand the corners and edges of your pcbs so that the fit.

soldering soldering mounted

Soldering

First you'll have to solder all the switches to the pcb. Then the diode to the pcb, and finally mount the pcbs on the keyboard shell and solder with a soldering iron the wires between the pcbs.

To solder the switches to the pcbs you need a hot air gun. I used helping hands to raise the pcbs and blast them from below and prevent the switches plastic from getting damaged. Once the switch is attached to the pcb plate you can use a soldering iron to reflow the corners so that they grip the switch. Otherwise you might snap them when handling them. Be careful to not use excessive soldering paste, as it can flow inside the switch itself and ruin it.

solder_paste soldering_position_0 soldering_position_1

When you are done with the switch you can solder the diode on the back. The diodes 1N4148W SOD323 are quite small, I used the hot air gun again for these, although you have again to be quick and not over do it with the heat or you could detach the switch on the front.

Trackball

The trackball uses Rexroth BTUs REXROTH R053010810. I bought them from rodavigo but they should be available in other stores.

I started out using static ceramic bearings, but the BTUs roll much better with almost no static friction (even after a lot of use).

Transport Box

As the keyboard switches are much more fragile than traditional choc and mx switches and not easily changed, I've made a pair of boxes to transport the keyboard.

They are tight enough to prevent the keyboard from moving around inside the case, but loose enough to not actually press any switch when closed. The left side has a cavity in which any moderately sized wire set for your keyboard should enter.

Modular Tenting

In the latest version of the ULP Dactyl I've modified the baseplates to attach to independent tenting blocks. These blocks can be printed in whichever angle is desired. I tried several ones before settling in 30 degrees.

Having these as independent pieces allows me to use the keyboard at home with the tenting blocks but still be able to transport the keyboard in a backpack with the transport boxes.

The tenting blocks are not very visually pleasing but they are robust and big enough to prevent any wobbliness while typing.

Curved Keycaps

I slightly modified the mask-2.0 keyboard to improve its printability in an FDM machine, here is the modified version. I print them with a 0.12 layer height and then smooth them out with a bit of sand paper. You can use the model defined in src/ulp_keycap_sanding.py to ease that job.

The result is surprisingly good (taken there isn't really any buyable keycap for these switches)

Running the configuration

I've made a Nix Flake with the needed Python interpreter to generate the keyboard. If you don't want to use the flake you can try to install solidpython2 with pip.

To use the flake you need to install Nix and activate Flake support. Then run

nix develop

That should build the interpreter and put you in a bash shell that will be able to generate the keyboard. Then run:

python src/dactyl_manuform.py

In order to render the model use one of the development snapshots from OpenSCAD. This code makes use of the fill function that is not implemented in the last release (from 2021). I used OpenSCAD-2023.10.27.ai16657 to develop most of the code. I currently use OpenSCAD-2024.04.13.ai19033. In addition some of the geometries of this model seem to only work with the Manifold library instead of the CGAL one. I use the following settings (file ~/.config/OpenSCAD.conf):

[advanced]
openCSGLimit=10000000

[design]
autoReload=true

[feature]
fast-csg=true
fast-csg-safer=true
manifold=true

Quickly iterating

There's a variable quickly in src/dactyl-manuform.py that will generate a rough keyboard with some of the most expensive features removed, you can set it to true to iterate faster on your design.


Wylderbuilds Dactyl Manuform - Python 3 - Cadquery

So, THIS is a fork of a fork of a fork of a... You get the idea.

This one is a direct fork of joshreve's brilliant adaptation of the original Clojure-based dactyl manuform generator redone in Python 3. Without his work, none of this would have been nearly as easy and straightforward as it has been. Vast kudos and thanks to him.

This repo is what I've customized and use to generate the models for the prints I sell online at Wylderbuilds, my Etsy store.

Main Differences and How to Make it Go

Eventually, joshreve and I hope to merge our changes together, but until then, here's a quick rundown on the current changes.

  • Wylderbuilds Trackball cluster -- A new, low-rider Trackball cluster. ("thumb_style": "TRACKBALL_WILD")
  • Wylderbuilds BTU Trackball cluster -- An even newer Trackball cluster with ball transfer unit support. ("thumb_style": TRACKBALL_BTU")
  • 1.5u pinky column support -- Outside 1.5u pinky columns can be generated ("pinky_1_5U": true, "first_1_5U_row": x, "last_1_5U_row": y)
  • Full bottom rows -- Default manuforms drop the bottom row keys on outside columns, this keeps them ("full_last_rows": true)
  • Clusters broken out into their own classes -- Making it easier to swap among them and add more.
  • Updated Kailh Hot swap holder -- If enabled, the hot swap holder is full size and stronger.
  • Cadquery builds generate STLs in addition to STEP files -- The bottom plates are (still) only generated properly when the "ENGINE": "cadquery" is set and this will now generate ready-to-print STLs (some models might need a little repair)
  • OTHER MISC BITS: OLED mount wall tweaks, tweaks to screw-sizes and some wall placements, manuform angle and heights tweaked, support for an "overrides" json config file.

The main script has been reworked into a single make_dactyl() function.

The setup and run instructions are still more-or-less the same, but here's some tips:

  • The docker file likely won't get far, it hasn't been maintained or updated in some time.

  • To run locally, the best route is to install Anaconda or Miniconda, start a conda shell and run the "conda.sh" script. If you're on Windows and don't want to do the WSL Linux thing, you can do the following:

  1. Do the Anaconda/Miniconda bit, above.

  2. In a conda shell, run the following lines:

     conda create --name=dactyl-keyboard python=3.8 -y
    
     conda activate dactyl-keyboard
    
     conda install -c conda-forge -c cadquery cadquery=master -y
    
     pip install dataclasses-json numpy scipy solidpython
    
     conda update --all -y
    

Then, still in the shell, from the base repo directory, run:

python src/dactyl_manuform.py

This will churn and pump out models into the "things" directory. In run_config.json, "ENGINE": "solid" or "cadquery" will specify OpenSCAD or STEP/STL files, respectively. Note that the cadquery option takes considerably longer. Openscad is best for fast iteration.

I'll update more here as things develop.

The Dactyl-ManuForm Keyboard - Python 3 - Cadquery

This is a fork of Dactyl-Manuform by Tom Short, which itself is a fork of Dactyl by Matthew Adereth, a parameterized, split-hand, concave, columnar, ergonomic keyboard.

While the code structure remains comparable to the original, Clojure and OpenSCAD have been replaced by Python and cadquery/OpenCASCADE. The predecessors were exceptional contributions to the ergo keyboard community by the authors but used a rather esoteric programming language, Clojure, and a relatively inconsistent geometry engine, OpenSCAD. My hope is that by converting the code the community will have an easier time modifying and evolving this design.

Collaborations and Donations

I decided to start accepting donations to help offset some of the prototyping costs and development time. There are 2 ways to contribute to this project:

Purchase a kit or keyboard from https://www.ergohaven.xyz/

I am also supported by ergohaven. The Dactyl-Manuforms are generated from this repository. After working with the owner on additions to support new features we decided to collaborate to evolve the designs they can offer and to support my work.

Donate directly

I opened Liberapay and Ko-fi accounts to accept donations. It is obviously not necessary, but is appreciated. If you do donate and have something specific you really want to see, please let me know. I want to be very open that I can't promise to complete all requests as there are many reasons like engine capabilities and generator construction that can make certain features unfeasible, but I will do my best to improve this repo for you and the ergo keyboard community.

Donate using Liberapay

ko-fi

Helpful Feedback

At this point there has been tons of feedback form the community and I greatly appreciate it. While I can only work on this in my free time, I do my best to respond to anyone who posts a comment or question. Feedback on issues or just possible new features is always welcome.

Updated Geometry Engine, generating STEP files

As part of the effort to create a new engine I converted the code to cadquery/OpenCASCADE. While OpenSCAD has provided an open source 3D engine that is extremely popular, it frankly creates barely passable STLs when you have complex geometry. After being extremely frustrated trying to fix the mesh I realized it is just not a stable engine to create high quality files. OpenCASCADE is extremely powerful but requires extensive detail to operate. cadquery provided an excellent platform to run a stable geometry engine with a simplified API.

STEP File in FreeCAD

Added Features

Docker Autobuild

Docker Support!

At the excellent suggestion of martint17r I have added docker configurations with a Windows batch file to assist with getting setup. If you have docker desktop installed, the batch file will create the dactyl-keyboard image and 4 containers:

  • DM-run: runs dactyl_manuform.py,
  • DM-config: runs generate_configuration.py
  • DM-shell: starts an interactive session to manually run from shell
    • tip: run bash after entering to get a better shell environment
  • DM-release-build: runs model_builder.py to generate a number of keyboard variants

All apps bindmount the src and things directory to allow editing in the host and running in the container. While not exactly hard drive space efficient, this hopefully helps those having issues getting cadquery running and prevents local Python conflicts. It works well on my computer, but I don't use docker often, so please let me know if you find any issues with the approach.

Refactored

Your settings are now created by generate_configuration.py or by direct modification of the run_config.json file. This allows you to save run_config.json to share your configuration.

Additionally, the OpenSCAD/solid python and OpenCASCADE/cadquery versions are merged with separate helper functions to decouple the generator from the target library. This also lets me stay sane by only modifying one file for most updates. Running dactyl_manuform.py will automatically load the run_config.json file.

Everyone gets a thumb cluster!

Added support of for the thumb clusters in the carbonfet Dactyl library. These are the "mini" and "carbonfet" thumb clusters. Additional trackball cluster added as well more info to be added after additional build and debug time.

Feel free to try them out with by setting 'thumb_style' to 'DEFAULT', 'MINI', 'CARBONFET', 'MINIDOX', 'TRACKBALL_ORBYL', and 'TRACKBALL_CJ'.

Trackball features accommodate a Perixx PERIPRO-303. Others may fit, but this was the target ball diameter for the design. It is a little smaller than a Ploopy to try to fit better in the cluster.

Rendered and actual images to be added in future commits.

Clippable switch mounting

Tired of hot glue and constraining the socket with "nubs"? I've added an adjustable undercut for using the clips on the sockets. May require some tweaking and little filing, but I have my DM built without any glue and you can too. Just use plate_style = 'UNDERCUT'. I've also added an improved local undercut using plate_style = 'NOTCH'.

Kailh Hotswap

Added a new switch for hot swap and a way to include any additional geometry in the key plate by use of an imported file. For hot swap just use plate_style = 'HS_NOTCH', plate_style = 'HS_HOLE', or plate_style = 'HS_NUB'. To import an arbitrary geometry set the plate_file = None and plate_offset = 0.0. The file must be .step for OpenCascade / cadquery and .stl for openSCAD / solid python. The zero reference should be the key center (XY), and the top of the plate (Z). Plate offset is a Z-axis translation for minor adjustments without modifying the geometry file.

DISCLAIMER: I have not built the hot swap version and cannot speak to the geometry. I found it running around in various places and don't know the origin. At least one user has claimed it works.

If you know the origin I would like to credit the originator. If you test it I'd love to know how well it works or if you come up with a better geometry I'm happy to add it.

Message me on Reddit u/j_oshreve if you are really stuck. I don't have much time to help, but can answer the occasional question. Also feel free to put in a pull request if you come up with something crafty and want to give others access to it.

Hot Swap in OpenSCAD

Multiple Controller Mounts

Added an external mount for a separate controller tray. Looks to work with lolligag's controller trays / holders:

Just use controller_mount_type = 'EXTERNAL'.

Controller tray opening Tray 1 Tray 2

This is a new feature so any feedback is appreciated. If you have issues, message me on Reddit and I will try to help correct them.

OLED Display Mount

Added 3 OLED mounts. Have printed them stand alone with success. I suggest clip, but it may require some tweaks based on your printer (over vs under sized).

OLED Clip Mounting OLED Clip Plate

oled_mount_type = 'CLIP' creates an opening to set the OLED with a clip on face plate to hold it down. This is the preferred mounting, but needs the OLED to have a removable connection.

oled_mount_type = 'SLIDING' creates an opening such that you can slide the screen up through the back and into place. Needs a piece of foam or a bit of glue to lock in place.

oled_mount_type = 'UNDERCUT' creates an opening with an undercut to create whatever custom holder you want. Will not work without additional part creation from the user.

This is a new feature so any feedback is appreciated. If you have issues, message me on Reddit and I will try to help correct them.

Screw Post Locations

You can now have slightly better control of screw mounts. Set to 'screws_offset':'INSIDE', 'screws_offset':'OUTSIDE' or 'screws_offset': 'ORIGINAL' to control screw locations relative to the wall. Inside Screws

I am planning to deprecate outside and original at some point. I don't see the need to carry all of them and the hidden look the best. If you disagree feel free to let me know and I may keep a second form.

Status / Future

This is now a bit of a monster of many minds and yet continues to bear fruit. I plan to continue to use this code to try new geometries and features to share for the foreseeable future.

Installation

There are three different environments in which you can run this application. Depending on which you choose, the installation process will vary.

Docker Environment Installation

Running the application with Docker is the most convenient way to do so. In addition to a straightforward installation, this also allows you to generate models in the background without having to keep a shell open.

Note: If you are using Windows, see Docker Autobuild.

Before you proceed, ensure you have installed Docker and the docker command is available from your terminal.

There are two tools you can use to help manage the Docker containers associated with this project.

Make

If you prefer, you can use make to manage the containers. Type make help to see the available commands.

Bash Script

The dactyl.sh bash script provides a CLI to manage the containers. Type ./dactyl.sh --help to see all CLI options.

In addition to the CLI you can run ./dactyl.sh without any arguments to use an interactive menu.

Upon running the script, you will be prompted to build the dactyl-keyboard Docker image.

Once the image is built, you can choose which containers to run on an as-needed basis. In general, you can start, stop, rebuild, inspect, and remove the containers via the CLI/Menu.

You can also remove all of the Docker artifacts by running the included uninstaller.

Tip: Run ./dactyl.sh shell --session to jump into a bash session inside of the shell container.

Conda Environment Installation

After the Docker installation, Anaconda is the next best option. Before you begin, ensure you have installed Anaconda and the conda command is available from your terminal.

You can install all of the dependencies by hand, but you can automate the install by running the bash script ./conda.sh. This will create a python 3.7 environment named dactyl-keyboard and install all of the required dependencies.

If you would like to install into a conda environment manually, check the bash script to see all of the required commands.

If you would like to remove the conda artifacts, run ./conda.sh --uninstall.

Python Environment Installation

You can install the application in a regular python environment, but it is not recommended. You will not be able to take advantage of the updated geometry generated by the CadQuery engine, as this is only available via the Docker/Anaconda installation.

Setting up the Python environment - NEW

cadquery install

  • Install scipy, easiest method is pip install scipy or pip3 install scipy on linux.
  • Install cadquery, many options (see link), but easiest method is conda install -c conda-forge -c cadquery cadquery=2. Props to the creators/maintainers, this has the power of Open CASCADE with nearing the simplicity of OpenSCAD.

OpenSCAD install

Generating the design

Generating the design - UPDATED

  • Run python dactyl_manuform_cadquery.py or python3 dactyl_manuform_cadquery.py
  • Run python dactyl_manuform.py or python3 dactyl_manuform.py
  • Run generate_configuration.py or directly edit run_config.json to configure the design
  • Run dactyl_manuform.py to create the geometry (ENGINE variable in run determines method)
  • This will regenerate the things/ files (or in subdirectory if defined in config)
    • *left.*
    • *right.*
    • *plate.*
    • *oled_clip.* (if applicable)
    • *oled_clip_test.* (if applicable)
  • Use OpenSCAD to open a .scad file
  • Use FreeCAD or other application to open a .step file
  • Make changes to design, repeat run step
  • When done, use OpenSCAD or FreeCAD to export STL files

The majority of the the rest of the below content is as defined by previous authors, except where noted.

Origin

Imgur

The main change is that the thumb cluster was adapted from the ManuForm keyboard (geekhack). The walls were changed to just drop to the floor. The keyboard is paramaterized to allow adjusting the following:

  • Rows: 4 - 6
  • Columns: 5 and up
  • Row curvature
  • Column curvature
  • Row tilt (tenting)
  • Column tilt
  • Column offsets
  • Height

Assembly

Printing

Pre-generated files can be opened in OpenSCAD or FreeCAD and exported to STL. Bottom plate is available as a step file or dxf for cadquery or a .scad file to be exported from OpenSCAD.

Wiring

Here are materials tshort used for wiring.

I wired one half using the traditional approach of using the legs of a diode to form the row connections. (I'm not great at soldering, so this was challenging for me.) For this side, I used magnet wire to wire columns. That worked okay. The magnet wire is small enough, it wants to move around, and it's hard to tell if you have a good connection.

Imgur

For another half, I used stripboard for the row connections. This allowed me to presolder all of the diodes. Then, I hot-glued this in place and finished the soldering of the other diode ends. I like this approach quite a lot. Connections for the diodes were much easier with one end fixed down. On this half, I also used copper tape to connect columns. This worked a bit better than the magnet wire for me. For a future version, I may try just bare tinned copper wire for columns (something like #20). With the stripboard, it's pretty easy keeping row and column connections separate.

Imgur

Note that a telephone handset cable has leads that are reversed, so take this into account when connecting these leads to the controller.

The 3D printed part is the main keyboard. You can attach a bottom plate with screws. The case has holes for heat-set inserts designed to hold 3- to 6-mm long M3 screws. Then, I used wafer-head screws to connect a bottom plate. If wires aren't dangling, a bottom plate may not be needed. You need something on the bottom to keep the keyboard from sliding around. Without a plate, you could use a rubber pad, or you could dip the bottom of the keyboard in PlastiDip.

For more photos of the first complete wiring of v0.4, see Imgur.

This is how the rows/columns wire to the keys and the ProMicro Wire Diagram

Alternative row-driven wiring diagram for ProMicro:

NOTE: you also make sure the firmware is set up correctly (ex: change row pins with col pins)

Left Wire Diagram

Right Wire Diagram

Firmware

Firmware goes hand in hand with how you wire the circuit. I adapted the QMK firmware here. This allows each side to work separately or together. This site also shows connections for the Arduino Pro Micro controllers.

License

General Code Copyright © 2015-2021 Matthew Adereth, Tom Short, and Joshua Shreve Mini thumb cluster Copyright © 2015-2018 Matthew Adereth, Tom Short, and Leo Lou Carbonfet thumb cluster © 2015-2018 Matthew Adereth, Tom Short, and carbonfet (github username)

The source code for generating the models (everything excluding the things/ and resources/ directories is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3. The generated models and PCB designs are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike License Version 3.0.

About

A Dactyl mounting Cherry Ultra Low Profile switches :D

Resources

License

AGPL-3.0, Unknown licenses found

Licenses found

AGPL-3.0
LICENSE
Unknown
LICENSE-models

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 92.9%
  • Shell 6.1%
  • Other 1.0%