pahole: avoid segfault when parsing a problematic file #104

kernel-patches-bot · 2022-03-04T12:45:39Z

Pull request for series with
subject: pahole: avoid segfault when parsing a problematic file
version: 1
url: https://patchwork.kernel.org/project/netdevbpf/list/?series=620346

kernel-patches-bot · 2022-03-04T12:45:40Z

Master branch: 18b1ab7
series: https://patchwork.kernel.org/project/netdevbpf/list/?series=620346
version: 1

Pull request is NOT updated. Failed to apply https://patchwork.kernel.org/project/netdevbpf/list/?series=620346
error message:

Cmd('git') failed due to: exit code(128)
  cmdline: git am -3
  stdout: 'Applying: pahole: avoid segfault when parsing a problematic file
Patch failed at 0001 pahole: avoid segfault when parsing a problematic file
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".'
  stderr: 'error: sha1 information is lacking or useless (dwarf_loader.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch'

conflict:

kernel-patches-bot · 2022-03-04T14:56:53Z

At least one diff in series https://patchwork.kernel.org/project/netdevbpf/list/?series=620346 irrelevant now. Closing PR.

The BPF STX/LDX instruction uses offset relative to the FP to address stack space. Since the BPF_FP locates at the top of the frame, the offset is usually a negative number. However, arm64 str/ldr immediate instruction requires that offset be a positive number. Therefore, this patch tries to convert the offsets. The method is to find the negative offset furthest from the FP firstly. Then add it to the FP, calculate a bottom position, called FPB, and then adjust the offsets in other STR/LDX instructions relative to FPB. FPB is saved using the callee-saved register x27 of arm64 which is not used yet. Before adjusting the offset, the patch checks every instruction to ensure that the FP does not change in run-time. If the FP may change, no offset is adjusted. For example, for the following bpftrace command: bpftrace -e 'kprobe:do_sys_open { printf("opening: %s\n", str(arg1)); }' Without this patch, jited code(fragment): 0: bti c 4: stp x29, x30, [sp, #-16]! 8: mov x29, sp c: stp x19, x20, [sp, #-16]! 10: stp x21, x22, [sp, #-16]! 14: stp x25, x26, [sp, #-16]! 18: mov x25, sp 1c: mov x26, #0x0 // #0 20: bti j 24: sub sp, sp, #0x90 28: add x19, x0, #0x0 2c: mov x0, #0x0 // #0 30: mov x10, #0xffffffffffffff78 // #-136 34: str x0, [x25, x10] 38: mov x10, #0xffffffffffffff80 // #-128 3c: str x0, [x25, x10] 40: mov x10, #0xffffffffffffff88 // #-120 44: str x0, [x25, x10] 48: mov x10, #0xffffffffffffff90 // #-112 4c: str x0, [x25, x10] 50: mov x10, #0xffffffffffffff98 // #-104 54: str x0, [x25, x10] 58: mov x10, #0xffffffffffffffa0 // #-96 5c: str x0, [x25, x10] 60: mov x10, #0xffffffffffffffa8 // #-88 64: str x0, [x25, x10] 68: mov x10, #0xffffffffffffffb0 // #-80 6c: str x0, [x25, x10] 70: mov x10, #0xffffffffffffffb8 // #-72 74: str x0, [x25, x10] 78: mov x10, #0xffffffffffffffc0 // #-64 7c: str x0, [x25, x10] 80: mov x10, #0xffffffffffffffc8 // #-56 84: str x0, [x25, x10] 88: mov x10, #0xffffffffffffffd0 // #-48 8c: str x0, [x25, x10] 90: mov x10, #0xffffffffffffffd8 // #-40 94: str x0, [x25, x10] 98: mov x10, #0xffffffffffffffe0 // #-32 9c: str x0, [x25, x10] a0: mov x10, #0xffffffffffffffe8 // #-24 a4: str x0, [x25, x10] a8: mov x10, #0xfffffffffffffff0 // #-16 ac: str x0, [x25, x10] b0: mov x10, #0xfffffffffffffff8 // #-8 b4: str x0, [x25, x10] b8: mov x10, #0x8 // #8 bc: ldr x2, [x19, x10] [...] With this patch, jited code(fragment): 0: bti c 4: stp x29, x30, [sp, #-16]! 8: mov x29, sp c: stp x19, x20, [sp, #-16]! 10: stp x21, x22, [sp, #-16]! 14: stp x25, x26, [sp, #-16]! 18: stp x27, x28, [sp, #-16]! 1c: mov x25, sp 20: sub x27, x25, #0x88 24: mov x26, #0x0 // #0 28: bti j 2c: sub sp, sp, #0x90 30: add x19, x0, #0x0 34: mov x0, #0x0 // #0 38: str x0, [x27] 3c: str x0, [x27, #8] 40: str x0, [x27, #16] 44: str x0, [x27, #24] 48: str x0, [x27, #32] 4c: str x0, [x27, #40] 50: str x0, [x27, #48] 54: str x0, [x27, #56] 58: str x0, [x27, #64] 5c: str x0, [x27, #72] 60: str x0, [x27, #80] 64: str x0, [x27, #88] 68: str x0, [x27, #96] 6c: str x0, [x27, #104] 70: str x0, [x27, #112] 74: str x0, [x27, #120] 78: str x0, [x27, #128] 7c: ldr x2, [x19, #8] [...] Signed-off-by: Xu Kuohai <[email protected]>

The BPF STX/LDX instruction uses offset relative to the FP to address stack space. Since the BPF_FP locates at the top of the frame, the offset is usually a negative number. However, arm64 str/ldr immediate instruction requires that offset be a positive number. Therefore, this patch tries to convert the offsets. The method is to find the negative offset furthest from the FP firstly. Then add it to the FP, calculate a bottom position, called FPB, and then adjust the offsets in other STR/LDX instructions relative to FPB. FPB is saved using the callee-saved register x27 of arm64 which is not used yet. Before adjusting the offset, the patch checks every instruction to ensure that the FP does not change in run-time. If the FP may change, no offset is adjusted. For example, for the following bpftrace command: bpftrace -e 'kprobe:do_sys_open { printf("opening: %s\n", str(arg1)); }' Without this patch, jited code(fragment): 0: bti c 4: stp x29, x30, [sp, #-16]! 8: mov x29, sp c: stp x19, x20, [sp, #-16]! 10: stp x21, x22, [sp, #-16]! 14: stp x25, x26, [sp, #-16]! 18: mov x25, sp 1c: mov x26, #0x0 // #0 20: bti j 24: sub sp, sp, #0x90 28: add x19, x0, #0x0 2c: mov x0, #0x0 // #0 30: mov x10, #0xffffffffffffff78 // #-136 34: str x0, [x25, x10] 38: mov x10, #0xffffffffffffff80 // #-128 3c: str x0, [x25, x10] 40: mov x10, #0xffffffffffffff88 // #-120 44: str x0, [x25, x10] 48: mov x10, #0xffffffffffffff90 // #-112 4c: str x0, [x25, x10] 50: mov x10, #0xffffffffffffff98 // #-104 54: str x0, [x25, x10] 58: mov x10, #0xffffffffffffffa0 // #-96 5c: str x0, [x25, x10] 60: mov x10, #0xffffffffffffffa8 // #-88 64: str x0, [x25, x10] 68: mov x10, #0xffffffffffffffb0 // #-80 6c: str x0, [x25, x10] 70: mov x10, #0xffffffffffffffb8 // #-72 74: str x0, [x25, x10] 78: mov x10, #0xffffffffffffffc0 // #-64 7c: str x0, [x25, x10] 80: mov x10, #0xffffffffffffffc8 // #-56 84: str x0, [x25, x10] 88: mov x10, #0xffffffffffffffd0 // #-48 8c: str x0, [x25, x10] 90: mov x10, #0xffffffffffffffd8 // #-40 94: str x0, [x25, x10] 98: mov x10, #0xffffffffffffffe0 // #-32 9c: str x0, [x25, x10] a0: mov x10, #0xffffffffffffffe8 // #-24 a4: str x0, [x25, x10] a8: mov x10, #0xfffffffffffffff0 // #-16 ac: str x0, [x25, x10] b0: mov x10, #0xfffffffffffffff8 // #-8 b4: str x0, [x25, x10] b8: mov x10, #0x8 // #8 bc: ldr x2, [x19, x10] [...] With this patch, jited code(fragment): 0: bti c 4: stp x29, x30, [sp, #-16]! 8: mov x29, sp c: stp x19, x20, [sp, #-16]! 10: stp x21, x22, [sp, #-16]! 14: stp x25, x26, [sp, #-16]! 18: stp x27, x28, [sp, #-16]! 1c: mov x25, sp 20: sub x27, x25, #0x88 24: mov x26, #0x0 // #0 28: bti j 2c: sub sp, sp, #0x90 30: add x19, x0, #0x0 34: mov x0, #0x0 // #0 38: str x0, [x27] 3c: str x0, [x27, #8] 40: str x0, [x27, #16] 44: str x0, [x27, #24] 48: str x0, [x27, #32] 4c: str x0, [x27, #40] 50: str x0, [x27, #48] 54: str x0, [x27, #56] 58: str x0, [x27, #64] 5c: str x0, [x27, #72] 60: str x0, [x27, #80] 64: str x0, [x27, #88] 68: str x0, [x27, #96] 6c: str x0, [x27, #104] 70: str x0, [x27, #112] 74: str x0, [x27, #120] 78: str x0, [x27, #128] 7c: ldr x2, [x19, #8] [...] Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

Add bpf trampoline support for arm64. Most of the logic is the same as x86. Tested on raspberry pi 4b and qemu with KASLR disabled (avoid long jump), result: #9 /1 bpf_cookie/kprobe:OK #9 /2 bpf_cookie/multi_kprobe_link_api:FAIL #9 /3 bpf_cookie/multi_kprobe_attach_api:FAIL #9 /4 bpf_cookie/uprobe:OK #9 /5 bpf_cookie/tracepoint:OK #9 /6 bpf_cookie/perf_event:OK #9 /7 bpf_cookie/trampoline:OK #9 /8 bpf_cookie/lsm:OK #9 bpf_cookie:FAIL #18 /1 bpf_tcp_ca/dctcp:OK #18 /2 bpf_tcp_ca/cubic:OK #18 /3 bpf_tcp_ca/invalid_license:OK #18 /4 bpf_tcp_ca/dctcp_fallback:OK #18 /5 bpf_tcp_ca/rel_setsockopt:OK #18 bpf_tcp_ca:OK #51 /1 dummy_st_ops/dummy_st_ops_attach:OK #51 /2 dummy_st_ops/dummy_init_ret_value:OK #51 /3 dummy_st_ops/dummy_init_ptr_arg:OK #51 /4 dummy_st_ops/dummy_multiple_args:OK #51 dummy_st_ops:OK #55 fentry_fexit:OK #56 fentry_test:OK #57 /1 fexit_bpf2bpf/target_no_callees:OK #57 /2 fexit_bpf2bpf/target_yes_callees:OK #57 /3 fexit_bpf2bpf/func_replace:OK #57 /4 fexit_bpf2bpf/func_replace_verify:OK #57 /5 fexit_bpf2bpf/func_sockmap_update:OK #57 /6 fexit_bpf2bpf/func_replace_return_code:OK #57 /7 fexit_bpf2bpf/func_map_prog_compatibility:OK #57 /8 fexit_bpf2bpf/func_replace_multi:OK #57 /9 fexit_bpf2bpf/fmod_ret_freplace:OK #57 fexit_bpf2bpf:OK #58 fexit_sleep:OK #59 fexit_stress:OK #60 fexit_test:OK #67 get_func_args_test:OK #68 get_func_ip_test:OK #104 modify_return:OK #237 xdp_bpf2bpf:OK bpf_cookie/multi_kprobe_link_api and bpf_cookie/multi_kprobe_attach_api failed due to lack of multi_kprobe on arm64. Signed-off-by: Xu Kuohai <[email protected]> Acked-by: Song Liu <[email protected]>

Add bpf trampoline support for arm64. Most of the logic is the same as x86. Tested on raspberry pi 4b and qemu with KASLR disabled (avoid long jump), result: #9 /1 bpf_cookie/kprobe:OK #9 /2 bpf_cookie/multi_kprobe_link_api:FAIL #9 /3 bpf_cookie/multi_kprobe_attach_api:FAIL #9 /4 bpf_cookie/uprobe:OK #9 /5 bpf_cookie/tracepoint:OK #9 /6 bpf_cookie/perf_event:OK #9 /7 bpf_cookie/trampoline:OK #9 /8 bpf_cookie/lsm:OK #9 bpf_cookie:FAIL #18 /1 bpf_tcp_ca/dctcp:OK #18 /2 bpf_tcp_ca/cubic:OK #18 /3 bpf_tcp_ca/invalid_license:OK #18 /4 bpf_tcp_ca/dctcp_fallback:OK #18 /5 bpf_tcp_ca/rel_setsockopt:OK #18 bpf_tcp_ca:OK #51 /1 dummy_st_ops/dummy_st_ops_attach:OK #51 /2 dummy_st_ops/dummy_init_ret_value:OK #51 /3 dummy_st_ops/dummy_init_ptr_arg:OK #51 /4 dummy_st_ops/dummy_multiple_args:OK #51 dummy_st_ops:OK #55 fentry_fexit:OK #56 fentry_test:OK #57 /1 fexit_bpf2bpf/target_no_callees:OK #57 /2 fexit_bpf2bpf/target_yes_callees:OK #57 /3 fexit_bpf2bpf/func_replace:OK #57 /4 fexit_bpf2bpf/func_replace_verify:OK #57 /5 fexit_bpf2bpf/func_sockmap_update:OK #57 /6 fexit_bpf2bpf/func_replace_return_code:OK #57 /7 fexit_bpf2bpf/func_map_prog_compatibility:OK #57 /8 fexit_bpf2bpf/func_replace_multi:OK #57 /9 fexit_bpf2bpf/fmod_ret_freplace:OK #57 fexit_bpf2bpf:OK #58 fexit_sleep:OK #59 fexit_stress:OK #60 fexit_test:OK #67 get_func_args_test:OK #68 get_func_ip_test:OK #104 modify_return:OK #237 xdp_bpf2bpf:OK bpf_cookie/multi_kprobe_link_api and bpf_cookie/multi_kprobe_attach_api failed due to lack of multi_kprobe on arm64. Signed-off-by: Xu Kuohai <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: KP Singh <[email protected]>

Dummy commit

6587e2d

kernel-patches-bot added bpf merge-conflict new V1 labels Mar 4, 2022

kernel-patches-bot added not-applicable and removed merge-conflict new labels Mar 4, 2022

kernel-patches-bot closed this Mar 4, 2022

kernel-patches-bot deleted the series/620346=>bpf branch March 4, 2022 14:56

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

pahole: avoid segfault when parsing a problematic file #104

pahole: avoid segfault when parsing a problematic file #104

kernel-patches-bot commented Mar 4, 2022

kernel-patches-bot commented Mar 4, 2022

kernel-patches-bot commented Mar 4, 2022

pahole: avoid segfault when parsing a problematic file #104

pahole: avoid segfault when parsing a problematic file #104

Conversation

kernel-patches-bot commented Mar 4, 2022

kernel-patches-bot commented Mar 4, 2022

kernel-patches-bot commented Mar 4, 2022