bpf, arm64: Optimize BPF store/load using str/ldr with immediate offset #141
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Master branch: 6789ab9 |
|
Master branch: c09df4b |
kernel-patches-bot
force-pushed
the
series/622651=>bpf-next
branch
from
68c49b4
to
a9b15ce
Compare
|
Master branch: d3b351f |
kernel-patches-bot
force-pushed
the
series/622651=>bpf-next
branch
from
a9b15ce
to
2034771
Compare
The current BPF store/load instruction is translated by the JIT into two instructions. The first instruction moves the immediate offset into a temporary register. The second instruction uses this temporary register to do the real store/load. In fact, arm64 supports addressing with immediate offsets. So This patch introduces optimization that uses arm64 str/ldr instruction with immediate offset when the offset fits. Example of generated instuction for r2 = *(u64 *)(r1 + 0): without optimization: mov x10, 0 ldr x1, [x0, x10] with optimization: ldr x1, [x0, 0] If the offset is negative, or is not aligned correctly, or exceeds max value, rollback to the use of temporary register. Result for test_bpf: # dmesg -D # insmod test_bpf.ko # dmesg | grep Summary test_bpf: Summary: 1009 PASSED, 0 FAILED, [997/997 JIT'ed] test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed] test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED Signed-off-by: Xu Kuohai <[email protected]>
|
Master branch: d3b351f |
kernel-patches-bot
force-pushed
the
series/622651=>bpf-next
branch
from
2034771
to
8397976
Compare
|
At least one diff in series https://patchwork.kernel.org/project/netdevbpf/list/?series=623094 expired. Closing PR. |
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Jul 9, 2023
Add selftests for BTF_TYPE_SAFE_TRUSTED_UNION, the result as follows: #141/1 nested_trust/test_read_cpumask:OK #141/2 nested_trust/test_skb_field:OK <<<< #141/3 nested_trust/test_invalid_nested_user_cpus:OK #141/4 nested_trust/test_invalid_nested_offset:OK #141/5 nested_trust/test_invalid_skb_field:OK <<<< #141 nested_trust:OK Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Jul 10, 2023
Add selftests for BTF_TYPE_SAFE_TRUSTED_UNION, the result as follows: #141/1 nested_trust/test_read_cpumask:OK #141/2 nested_trust/test_skb_field:OK <<<< #141/3 nested_trust/test_invalid_nested_user_cpus:OK #141/4 nested_trust/test_invalid_nested_offset:OK #141/5 nested_trust/test_invalid_skb_field:OK <<<< #141 nested_trust:OK Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Jul 11, 2023
Add selftests for BTF_TYPE_SAFE_TRUSTED_UNION, the result as follows: #141/1 nested_trust/test_read_cpumask:OK #141/2 nested_trust/test_skb_field:OK <<<< #141/3 nested_trust/test_invalid_nested_user_cpus:OK #141/4 nested_trust/test_invalid_nested_offset:OK #141/5 nested_trust/test_invalid_skb_field:OK <<<< #141 nested_trust:OK Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Jul 13, 2023
Add selftests for nested_strust to check whehter PTR_UNTRUSTED is cleared as expected, the result as follows: #141/1 nested_trust/test_read_cpumask:OK #141/2 nested_trust/test_skb_field:OK <<<< #141/3 nested_trust/test_invalid_nested_user_cpus:OK #141/4 nested_trust/test_invalid_nested_offset:OK #141/5 nested_trust/test_invalid_skb_field:OK <<<< #141 nested_trust:OK The #141/2 and #141/5 are newly added. Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Jul 13, 2023
Add selftests for nested_strust to check whehter PTR_UNTRUSTED is cleared as expected, the result as follows: #141/1 nested_trust/test_read_cpumask:OK #141/2 nested_trust/test_skb_field:OK <<<< #141/3 nested_trust/test_invalid_nested_user_cpus:OK #141/4 nested_trust/test_invalid_nested_offset:OK #141/5 nested_trust/test_invalid_skb_field:OK <<<< #141 nested_trust:OK The #141/2 and #141/5 are newly added. Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Jul 13, 2023
Add selftests for nested_strust to check whehter PTR_UNTRUSTED is cleared as expected, the result as follows: #141/1 nested_trust/test_read_cpumask:OK #141/2 nested_trust/test_skb_field:OK <<<< #141/3 nested_trust/test_invalid_nested_user_cpus:OK #141/4 nested_trust/test_invalid_nested_offset:OK #141/5 nested_trust/test_invalid_skb_field:OK <<<< #141 nested_trust:OK The #141/2 and #141/5 are newly added. Signed-off-by: Yafang Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Sep 18, 2023
Inject fault while probing kunit-example-test.ko, if kzalloc fails in kunit_parse_glob_filter(), strcpy() or strncpy() to NULL will cause below null-ptr-deref bug. So check NULL for kzalloc() and return int instead of void for kunit_parse_glob_filter(). Unable to handle kernel paging request at virtual address dfff800000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfff800000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: kunit_example_test cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test] CPU: 4 PID: 6047 Comm: modprobe Tainted: G W N 6.5.0-next-20230829+ #141 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strncpy+0x58/0xc0 lr : kunit_filter_suites+0x15c/0xa84 sp : ffff800082a17420 x29: ffff800082a17420 x28: 0000000000000000 x27: 0000000000000004 x26: 0000000000000000 x25: ffffa847e40a5320 x24: 0000000000000001 x23: 0000000000000000 x22: 0000000000000001 x21: dfff800000000000 x20: 000000000000002a x19: 0000000000000000 x18: 00000000750b3b54 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 34393178302f3039 x12: ffff7508fcea4ec1 x11: 1ffff508fcea4ec0 x10: ffff7508fcea4ec0 x9 : dfff800000000000 x8 : ffff6051b1a7f86a x7 : ffff800082a17270 x6 : 0000000000000002 x5 : 0000000000000098 x4 : ffff028d9817b250 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffffa847e40a5320 x0 : 0000000000000000 Call trace: strncpy+0x58/0xc0 kunit_filter_suites+0x15c/0xa84 kunit_module_notify+0x1b0/0x3ac blocking_notifier_call_chain+0xc4/0x128 do_init_module+0x250/0x594 load_module+0x37b0/0x44b4 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2c8/0x524 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x38/0x78 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: 5400028a d343fe63 12000a62 39400034 (38f56863) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x284761400000 from 0xffff800080000000 PHYS_OFFSET: 0xfffffd7380000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Fixes: a127b15 ("kunit: tool: allow filtering test cases via glob") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Rae Moar <[email protected]> Reviewed-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Apr 30, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Apr 30, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 1, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 1, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 1, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 1, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 3, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 3, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 6, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 6, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 6, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 9, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 9, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 9, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 12, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Nov 1, 2024
…low() There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1]. Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu(). [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/361: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 dev_get_by_index_rcu+0x1d3/0x210 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0 ip_tunnel_bind_dev+0x72f/0xa00 ip_tunnel_newlink+0x368/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: db53cd3 ("net: Handle l3mdev in ip_tunnel_init_flow") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Pull request for series with
subject: bpf, arm64: Optimize BPF store/load using str/ldr with immediate offset
version: 1
url: https://patchwork.kernel.org/project/netdevbpf/list/?series=622651