Merge tag 'v5.4.103' into 5.4-2.1.x-imx

This is the 5.4.103 stable release

Signed-off-by: Andrey Zhizhikin <[email protected]>

Documentation/devicetree/bindings/net/btusb.txt

@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -204,6 +204,11 @@ properties:
                 Indicates that full-duplex is used. When absent, half
                 duplex is assumed.
 
+            pause:
+              $ref: /schemas/types.yaml#definitions/flag
+              description:
+                Indicates that pause should be enabled.
+
             asym-pause:
               $ref: /schemas/types.yaml#definitions/flag
               description:

Documentation/filesystems/sysfs.txt

@@ -232,12 +232,10 @@ Other notes:
   is 4096. 
 
 - show() methods should return the number of bytes printed into the
-  buffer. This is the return value of scnprintf().
+  buffer.
 
-- show() must not use snprintf() when formatting the value to be
-  returned to user space. If you can guarantee that an overflow
-  will never happen you can use sprintf() otherwise you must use
-  scnprintf().
+- show() should only use sysfs_emit() or sysfs_emit_at() when formatting
+  the value to be returned to user space.
 
 - store() should return the number of bytes used from the buffer. If the
   entire buffer has been used, just return the count argument.

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 102
+SUBLEVEL = 103
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/arm/xen/p2m.c

@@ -93,12 +93,39 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 	int i;
 
 	for (i = 0; i < count; i++) {
+		struct gnttab_unmap_grant_ref unmap;
+		int rc;
+
 		if (map_ops[i].status)
 			continue;
-		if (unlikely(!set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
-				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT))) {
-			return -ENOMEM;
-		}
+		if (likely(set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
+				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT)))
+			continue;
+
+		/*
+		 * Signal an error for this slot. This in turn requires
+		 * immediate unmapping.
+		 */
+		map_ops[i].status = GNTST_general_error;
+		unmap.host_addr = map_ops[i].host_addr,
+		unmap.handle = map_ops[i].handle;
+		map_ops[i].handle = ~0;
+		if (map_ops[i].flags & GNTMAP_device_map)
+			unmap.dev_bus_addr = map_ops[i].dev_bus_addr;
+		else
+			unmap.dev_bus_addr = 0;
+
+		/*
+		 * Pre-populate the status field, to be recognizable in
+		 * the log message below.
+		 */
+		unmap.status = 1;
+
+		rc = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref,
+					       &unmap, 1);
+		if (rc || unmap.status != GNTST_okay)
+			pr_err_once("gnttab unmap failed: rc=%d st=%d\n",
+				    rc, unmap.status);
 	}
 
 	return 0;

arch/arm64/kernel/module.lds

@@ -1,5 +1,5 @@
 SECTIONS {
-	.plt (NOLOAD) : { BYTE(0) }
-	.init.plt (NOLOAD) : { BYTE(0) }
-	.text.ftrace_trampoline (NOLOAD) : { BYTE(0) }
+	.plt 0 (NOLOAD) : { BYTE(0) }
+	.init.plt 0 (NOLOAD) : { BYTE(0) }
+	.text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) }
 }

arch/mips/include/asm/string.h

@@ -10,127 +10,6 @@
 #ifndef _ASM_STRING_H
 #define _ASM_STRING_H
 
-
-/*
- * Most of the inline functions are rather naive implementations so I just
- * didn't bother updating them for 64-bit ...
- */
-#ifdef CONFIG_32BIT
-
-#ifndef IN_STRING_C
-
-#define __HAVE_ARCH_STRCPY
-static __inline__ char *strcpy(char *__dest, __const__ char *__src)
-{
-  char *__xdest = __dest;
-
-  __asm__ __volatile__(
-	".set\tnoreorder\n\t"
-	".set\tnoat\n"
-	"1:\tlbu\t$1,(%1)\n\t"
-	"addiu\t%1,1\n\t"
-	"sb\t$1,(%0)\n\t"
-	"bnez\t$1,1b\n\t"
-	"addiu\t%0,1\n\t"
-	".set\tat\n\t"
-	".set\treorder"
-	: "=r" (__dest), "=r" (__src)
-	: "0" (__dest), "1" (__src)
-	: "memory");
-
-  return __xdest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n)
-{
-  char *__xdest = __dest;
-
-  if (__n == 0)
-    return __xdest;
-
-  __asm__ __volatile__(
-	".set\tnoreorder\n\t"
-	".set\tnoat\n"
-	"1:\tlbu\t$1,(%1)\n\t"
-	"subu\t%2,1\n\t"
-	"sb\t$1,(%0)\n\t"
-	"beqz\t$1,2f\n\t"
-	"addiu\t%0,1\n\t"
-	"bnez\t%2,1b\n\t"
-	"addiu\t%1,1\n"
-	"2:\n\t"
-	".set\tat\n\t"
-	".set\treorder"
-	: "=r" (__dest), "=r" (__src), "=r" (__n)
-	: "0" (__dest), "1" (__src), "2" (__n)
-	: "memory");
-
-  return __xdest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct)
-{
-  int __res;
-
-  __asm__ __volatile__(
-	".set\tnoreorder\n\t"
-	".set\tnoat\n\t"
-	"lbu\t%2,(%0)\n"
-	"1:\tlbu\t$1,(%1)\n\t"
-	"addiu\t%0,1\n\t"
-	"bne\t$1,%2,2f\n\t"
-	"addiu\t%1,1\n\t"
-	"bnez\t%2,1b\n\t"
-	"lbu\t%2,(%0)\n\t"
-#if defined(CONFIG_CPU_R3000)
-	"nop\n\t"
-#endif
-	"move\t%2,$1\n"
-	"2:\tsubu\t%2,$1\n"
-	"3:\t.set\tat\n\t"
-	".set\treorder"
-	: "=r" (__cs), "=r" (__ct), "=r" (__res)
-	: "0" (__cs), "1" (__ct));
-
-  return __res;
-}
-
-#endif /* !defined(IN_STRING_C) */
-
-#define __HAVE_ARCH_STRNCMP
-static __inline__ int
-strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count)
-{
-	int __res;
-
-	__asm__ __volatile__(
-	".set\tnoreorder\n\t"
-	".set\tnoat\n"
-	"1:\tlbu\t%3,(%0)\n\t"
-	"beqz\t%2,2f\n\t"
-	"lbu\t$1,(%1)\n\t"
-	"subu\t%2,1\n\t"
-	"bne\t$1,%3,3f\n\t"
-	"addiu\t%0,1\n\t"
-	"bnez\t%3,1b\n\t"
-	"addiu\t%1,1\n"
-	"2:\n\t"
-#if defined(CONFIG_CPU_R3000)
-	"nop\n\t"
-#endif
-	"move\t%3,$1\n"
-	"3:\tsubu\t%3,$1\n\t"
-	".set\tat\n\t"
-	".set\treorder"
-	: "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res)
-	: "0" (__cs), "1" (__ct), "2" (__count));
-
-	return __res;
-}
-#endif /* CONFIG_32BIT */
-
 #define __HAVE_ARCH_MEMSET
 extern void *memset(void *__s, int __c, size_t __count);
 

arch/mips/vdso/Makefile

@@ -16,12 +16,9 @@ ccflags-vdso := \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
 	$(filter -m%-float,$(KBUILD_CFLAGS)) \
 	$(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
+	$(CLANG_FLAGS) \
 	-D__VDSO__
 
-ifdef CONFIG_CC_IS_CLANG
-ccflags-vdso += $(filter --target=%,$(KBUILD_CFLAGS))
-endif
-
 #
 # The -fno-jump-tables flag only prevents the compiler from generating
 # jump tables but does not prevent the compiler from emitting absolute

arch/parisc/kernel/irq.c

@@ -376,7 +376,11 @@ static inline int eirr_to_irq(unsigned long eirr)
 /*
  * IRQ STACK - used for irq handler
  */
+#ifdef CONFIG_64BIT
+#define IRQ_STACK_SIZE      (4096 << 4) /* 64k irq stack size */
+#else
 #define IRQ_STACK_SIZE      (4096 << 3) /* 32k irq stack size */
+#endif
 
 union irq_stack_union {
 	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];

arch/x86/events/intel/core.c

@@ -4002,6 +4002,9 @@ static const struct x86_cpu_desc isolation_ucodes[] = {
 	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_X,		 2, 0x0b000014),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 3, 0x00000021),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 4, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 5, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 6, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 7, 0x00000000),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_L,		 3, 0x0000007c),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE,		 3, 0x0000007c),
 	INTEL_CPU_DESC(INTEL_FAM6_KABYLAKE,		 9, 0x0000004e),

arch/x86/kernel/module.c

@@ -114,6 +114,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
 			*location += sym->st_value;
 			break;
 		case R_386_PC32:
+		case R_386_PLT32:
 			/* Add the value, subtract its position */
 			*location += sym->st_value - (uint32_t)location;
 			break;

arch/x86/kernel/reboot.c

@@ -477,6 +477,15 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = {
 		},
 	},
 
+	{	/* PCIe Wifi card isn't detected after reboot otherwise */
+		.callback = set_pci_reboot,
+		.ident = "Zotac ZBOX CI327 nano",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "NA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZBOX-CI327NANO-GS-01"),
+		},
+	},
+
 	/* Sony */
 	{	/* Handle problems with rebooting on Sony VGN-Z540N */
 		.callback = set_bios_reboot,

arch/x86/tools/relocs.c

@@ -867,9 +867,11 @@ static int do_reloc32(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
@@ -910,9 +912,11 @@ static int do_reloc_real(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 

arch/x86/xen/p2m.c

@@ -714,6 +714,8 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 
 	for (i = 0; i < count; i++) {
 		unsigned long mfn, pfn;
+		struct gnttab_unmap_grant_ref unmap[2];
+		int rc;
 
 		/* Do not add to override if the map failed. */
 		if (map_ops[i].status != GNTST_okay ||
@@ -731,10 +733,46 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 
 		WARN(pfn_to_mfn(pfn) != INVALID_P2M_ENTRY, "page must be ballooned");
 
-		if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) {
-			ret = -ENOMEM;
-			goto out;
+		if (likely(set_phys_to_machine(pfn, FOREIGN_FRAME(mfn))))
+			continue;
+
+		/*
+		 * Signal an error for this slot. This in turn requires
+		 * immediate unmapping.
+		 */
+		map_ops[i].status = GNTST_general_error;
+		unmap[0].host_addr = map_ops[i].host_addr,
+		unmap[0].handle = map_ops[i].handle;
+		map_ops[i].handle = ~0;
+		if (map_ops[i].flags & GNTMAP_device_map)
+			unmap[0].dev_bus_addr = map_ops[i].dev_bus_addr;
+		else
+			unmap[0].dev_bus_addr = 0;
+
+		if (kmap_ops) {
+			kmap_ops[i].status = GNTST_general_error;
+			unmap[1].host_addr = kmap_ops[i].host_addr,
+			unmap[1].handle = kmap_ops[i].handle;
+			kmap_ops[i].handle = ~0;
+			if (kmap_ops[i].flags & GNTMAP_device_map)
+				unmap[1].dev_bus_addr = kmap_ops[i].dev_bus_addr;
+			else
+				unmap[1].dev_bus_addr = 0;
 		}
+
+		/*
+		 * Pre-populate both status fields, to be recognizable in
+		 * the log message below.
+		 */
+		unmap[0].status = 1;
+		unmap[1].status = 1;
+
+		rc = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref,
+					       unmap, 1 + !!kmap_ops);
+		if (rc || unmap[0].status != GNTST_okay ||
+		    unmap[1].status != GNTST_okay)
+			pr_err_once("gnttab unmap failed: rc=%d st0=%d st1=%d\n",
+				    rc, unmap[0].status, unmap[1].status);
 	}
 
 out: