beta V1.22

first_layer when generating tests will no longer have gap fill.
first_layer now adds it's PA command correctly and each test has it's independent value
welcome page now autoselects last selected role when running multitest plates.
infill_every_layers for internalinfill is now supported
if your feature_gcode contains firmwares set PA/LA commands it will be auto commented out when exporting .gcode file

beta V1.21

big changes with the welcome page. it's actually usefull now.

fixed bugs with default values not getting set.
fixed issue with 'internal_bridge_speed' missing on GUI

i also noticed the previous releases might of been missing .dll files..

beta V1.20

removed a bunch of lines and cleaned up.
couple new small features. loads extra number for test ID to bottom right of model.
fixed scaling in xyz
fixed flow calculations for scaling
max height of *5 layer_height
set read only for "number of tests" to create 10 is max(because of test ID feature, this can be fixed later on.)
set read only for "extrusion role" select
updated tooltips
removed some unnecessary text from main config window
on updating row count it auto populates the next rows(this is kinda buggy and could use improving)

i have not done any prints with beta v1.20 yet
up next: fix the welcome page and have it provide useful information 😃

linux version coming shortly :)

beta V1.00

recommended to backup your configs before launching

SuperSlicer based on Version 2.5.59.11
working beta V1.00
stable working beta that generates and adds the required pressure advance parts to the .gcode file
super simple and easy to use to find the values for PA/LA - currently unsupported roles = bridges, supports, ironing, gapfill,
config options for the test will be changed to manual entry later on. it's just dropdown boxes for now.

beta V1.10

recommended to backup your configs before launching

SuperSlicer based on Version 2.5.59.13
working beta V1.10
stable working beta that generates and adds the required pressure advance parts to the .gcode file
super simple and easy to use to find the values for PA/LA - currently unsupported roles = bridges, supports, ironing, gapfill,

added fixes for crash on slicing for 2 models
support manual text entry on combo boxes.

calibration - pressure advance - unfinished testing release

recommended to backup your configs before launching

built from base Version 2.5.59.3

need testers to help check their configs won't cause any issues with how the models are loaded positioned and scaled
the exact positioning/scale might be a little bit off for some configs.
the most important one to check is the 90_bend model itself, it can't have any gap_fill the first layer might sometimes(i know about this issue and need to figure out how to fix it.)

• SS will only add the "set pressure advance" parts to start of generated .gcode file.
• it won't add any "set pressure advance" parts though out the model. so theres no point printing the generated .gcode file yet.