| Part | Lecktor | Zaribo | RatRig | Notes |
|---|---|---|---|---|
| Prusa Bear Frame kit | 109,95€ | 89,99€ | Avoid Chinese clones as they won't have the same precision as the ones from the official sellers | |
| MK52 Heated bed carriage | 33,95€ | 34,50€ | You can try to source a carriage from Aliexpress and if you get an uneven one, compensate with Nylock Mod. But for the price difference just get a good one in the first place |
| Part | Lecktor | Zaribo | Amazon.es | fillment3d.pt | AlliExpress | Notes |
|---|---|---|---|---|---|---|
| 24v Power Supply | 36,00€ | 28,50€ | 29,50€ | |||
| PSU cables | 3,95€ | 6,95€ | Alternatively you can buy 14-16 gauge cable, spade terminals and make your own cable | |||
| BigTreeTech SKR 1.4 Turbo | 30,99€ | 42,50€ | 24,55€ | |||
| 5x BigTreeTech TMC2226 v1.0 | 24,52€ | You can also use the old TMC2209 V3.0 | ||||
| Nema 17 Motor Set | 89,95€ | 99,50€ | ||||
| MK52 24V Heated Bed | 89,50€ | 96,50€ | Includes magnets, thermistor, power cable, spacers and screws | |||
| PINDA V2 | 13,95€ | 14,95€ | 11,16€ | |||
| Prusa Mk3s IR Filament Sensor kit | 14,95€ | 7,63€ | Includes IR Sensor, Stell ball and Magnets | |||
| SKR Extension wire set | 11,95€ | 9,50€ | Alternatively you can replace the connectors by yourself (4x XHP-2 + 1x XHP-1 + 5x XHP-4) | |||
| BigTreeTech TFT35 V3.0 | 39,99€ | 26,00€ | ||||
| 2x 80cm LCD cable | 7,90€ | 9,00€ | 5,40€ | 5,62€ | BTT provides shorter cables |
| Part | Lecktor | Zaribo | Fillment3d.pt | Amazon.es | AlliExpress | Notes |
|---|---|---|---|---|---|---|
| Bondtech gears (1.75mm with 20mm shaft) | 29,50€ | 12,90€ | 15,15€ | You can use clones, as long as they are note crappy Chinese ones. | ||
| 50mm PTFE Tube | 0,30€ | |||||
| 3mm Nylon cable - 500mm | Search for 2,85mm filament sample or cleaning filament from a local store or buy some 3mm lawn mower nylon cord. | |||||
| Hotend Fan (40x40x10mm - 24v) | 10,90€ | Use Sunon or Mecatronics fans otherwise it will be hard to use the same firmware/slicer settings. | ||||
| Nozzle Fan (5015 - 24v) | 8,83€ | Use Sunon or Mecatronics fans otherwise it will be hard to use the same firmware/slicer settings. | ||||
| E3D V6 Hotend - 1.75mm | 59,95€ | 72,95€ | 18,16€ | 11,16€ | Make sure that your kit have all the parts listed below. |
| Part | Lecktor | Zaribo | Fillment3d.pt | Amazon.es | AlliExpress |
|---|---|---|---|---|---|
| E3D V6 Universal Heat Sink - 1.75mm | 14,50€ | 9,75€ | 6,63€ | ||
| E3D V6 Heat Break - 1.75mm | 13,50€ | 1,50€ | 3,98€ | ||
| E3D V6 Heater Block | 15,95€ | 3,00€ | 2,43 | ||
| Heater Cartridge 24V - 40W | 6,95€ | 6,50€ | 1,90€ | 4,07€ | |
| 3mm Thermistor Cartridge | 6,95€ | 6,95€ | 2,60€ | 6,51€ | |
| E3D Silicone Sock | 1,50€ | 4,95€ | 2,29€ | ||
| E3D Brass Nozzles - V6 | 6,50€ | 10,00€ | 4,21€ |
| Part | Lecktor | Zaribo | Notes |
|---|---|---|---|
| 322mm Smooth linear rods | 42,95€ | 2x 322mm Z axis| 2x 360mm Y axis| 2x 370mm X axis | |
| 10x LM8U bearings | 39,50€ | 49,50€ | 3x Extruder | 4x Z axis | 3x Y axis |
| Part | Lecktor | Zaribo | AlliExpress | Notes |
|---|---|---|---|---|
| 2x 2GT 16T pulley (5mm bore) | 5,90€ | 1x Y axis | 1x X axis | ||
| 2x 2GT 20T idler (3mm bore) - Smooth or toothed | 3,90€ | 1x Y axis | 1x X axis | ||
| Gates LL-2GT 6mm belt - 1530mm | 14,40€ | 8,50€ | 9,98€ | 880mm X axis| 650mm Y axis |
| Part | Quant. | Total | Lecktor | Zaribo | Fillment3d.pt | Notes |
|---|---|---|---|---|---|---|
| M3x8mm socket head screw (ISO 4762) | 8 | 0,72€ | 0,09€ | 4x SKR box | ||
| M3x10mm socket head screw (ISO 4762) | 17 | 1,36€ | 0,08€ | 3x Y motor mount | 14x for BearExxa | ||
| M3x12mm socket head screw (ISO 4762) | 8 | 0,80€ | 0,10€ | 8x Z motor mount | ||
| M3x16mm socket head screw (ISO 4762) | 1 | 0,14€ | 0,14€ | 1x PSU holder | ||
| M3x18mm socket head screw (ISO 4762) | 14 | 2,38€ | 14x BearExxa | |||
| M3x25mm socket head screw (ISO 4762) | 3 | 0,45€ | 0,15€ | 2x BearExxa | 1x SKR box | ||
| M3x40mm socket head screw (ISO 4762) | 6 | 1,44€ | 0,24€ | 6x BearExxa | ||
| M3x16 button head (ISO 7380) | 4 | 0,44€ | 0,11€ | 4x BearExxa hotend fan | ||
| M3 Steel washer (DIN 125) - 0.5mm thick | 13 | 0,07€ | 0,01€ | 8x Z motor mount | 5x BearExxa | ||
| M3 Hex nuts (DIN 934) | 15 | 0,75€ | 0,05€ | 1x PSU holder | 14x BearExxa | ||
| M3 Hex nylock nuts (DIN 985) | 4 | 0,52€ | 0,13€ | 4x BearExxa | ||
| M3 Square nuts (DIN 562) - 1.8mm thick and 5.5mm wide | 12 | 1,44€ | 0,12€ | 7x BearExxa | 5x SKR box | ||
| Dowel pin (15.8x2.95mm) | 2 | 1,50€ | 0,75€ | 1x Y idler | 1x X idler | ||
| Spring (Center 4.9mm, 15mm- free & 10mm compressed) | 1 | 0,95€ | 3,80€ | 0,95€ | Extruder |
| Part | Zaribo | Aliexpress | Notes |
|---|---|---|---|
| Original Thekkiinngg Powder-Coated Spring Sheet V4 | 49,50€ | Highly recommended | |
| FYSETC Double Sided Textured PEI Spring Steel Sheet | 21,93€ | Not the best one, but cheap. | |
| Trianglelab Double Sided Textured PEI Spring Steel Sheet | 38,02€ | Better than FYSETC, but not as good as Thekkiinngg. | |
| MK3 Spring Steel Plate | 10,72€ | This is just the Steel Plate. You will need to source 2x PEI Stickers. | |
| MK52 PEI for Steel Sheet | 13,50€ | This is just the sticker. You will need one sticker for each side and a Spring Steel Plate. | |
| MK52 Buildplate Black Sticker Sheet | 3,83€ | Not the best sticker, but works fine with PLA and not medium size objects. | |
| Note: You cannot print directly to the heated bed. You will need a "Textured Spring Steel Sheet" or a "Spring Steel Sheet" and two stickers. |
| Part | Lecktor | Aliexpress | Notes |
|---|---|---|---|
| 25x Zip ties 2.5x100mm | 2,15€ | 6x for extruder | 4x for Y rods | 15x for cable management | |
| Textile Cable Sleeve Set Prusa MK3 | 4,95€ | 2,62€ + 2,54€ | 1x 490x13mm for extruder + 2x 300x5mm for bed and x moto |