puppet-module-nscd

===

Puppet module to manage nscd, Linux's Name Service Cache Daemon.

Recommend reading the man page, NSCD.CONF(5). This module allows for parameterization of all options specified in the man page.

The module assumes that you want to set enable-cache to true for each of the services (passwd, group, hosts, and services). If this is not the case, you can disable the cache on a per service basis.

To use this module simply include ::nscd

===

Compatibility

---

This module has been tested to work on the following systems with the latest Puppet v3, v3 with future parser, v4, v5 and v6. See .travis.yml for the exact matrix of supported Puppet and ruby versions.

• Amazon Linux 2015
• Amazon Linux 2016
• Amazon Linux 2017
• Debian 6
• EL 5
• EL 6
• EL 7
• EL 8
• Solaris 10
• Suse 10
• Suse 11
• Suse 12
• Suse 15
• OpenSuse 13.1
• Ubuntu 12.04 LTS

Compatibility with Dell Authentication Services

---

When using nscd in combination with Dell Authentication Services (QAS/VAS) [1] it is recommended to turn off caching of passwd and groups.

nscd::passwd_enable_cache: 'no'
nscd::group_enable_cache:  'no'

[1] http://software.dell.com/products/authentication-services/

===

Parameters

---

All numbers should be type cast as strings. Global options for nscd.con can be accessed as parameters, with the dashes changed to underscores. Each per service option can be accessed as parameters and follow the naming scheme of <service>_<option> with the dashed changed to underscores. So enable-cache for the passwd service is available as passwd_enable_cache. The default values follow that of the man page, unless otherwise noted.

Resource parameters

---

package_name

String or array for name of package(s). 'USE_DEFAULTS' will use platform specific defaults.

• Default: 'USE_DEFAULTS'

package_ensure

String for value of ensure attribute of nscd package. Valid values are 'present', 'installed', or 'absent'.

• Default: 'present'

package_adminfile

String for value of Solaris specific adminfile attribute of package resource. 'USE_DEFAULTS' will use platform specific defaults.

• Default: 'USE_DEFAULTS'

package_source

String for value of Solaris specific source attribute of package resource. 'USE_DEFAULTS' will use platform specific defaults.

• Default: 'USE_DEFAULTS'

config_path

Path to nscd.conf.

• Default: '/etc/nscd.conf'

config_owner

Owner of nscd.conf.

• Default: 'root'

config_group

Group of nscd.conf.

• Default: 'root'

config_mode

Mode of nscd.conf. Must be in four digit octal notation.

• Default: '0644'

service_name

String or array for name of service(s). 'USE_DEFAULTS' will use platform specific defaults

• Default: 'USE_DEFAULTS'

service_ensure

String for value of ensure attribute of nscd service. Valid values are 'present', 'running', 'absent', or 'stopped'.

• Default: 'running'

service_enable

Value of enable attribute of nscd service. This determines if the service will start at boot or not. Allows for boolean, 'true', or 'false'.

• Default: true

service_provider

String for value of the provider attribute of nscd service. Specifying here will allow you to change the platform's default.

• Default: 'USE_DEFAULTS'

Global nscd.conf settings

---

logfile

Setting for logfile in nscd.conf. See nscd.conf(5). Must be an absolute path.

• Default: 'USE_DEFAULTS'

threads

Setting for threads in nscd.conf. See nscd.conf(5). Must be an number expressed as a string.

• Default: '5'

max_threads

Setting for max-threads in nscd.conf. See nscd.conf(5). Must be an number expressed as a string.

• Default: '32'

server_user

Setting for server-user in nscd.conf. See nscd.conf(5). 'USE_DEFAULTS' will use platform specific defaults. RedHat based systems set this optional parameter to 'nscd' while other platforms do not use it.

• Default: 'USE_DEFAULTS'

stat_user

Setting for stat-user in nscd.conf. See nscd.conf(5).

• Default: 'root'

debug_level

Setting for debug-level in nscd.conf. See nscd.conf(5). Must be a number expressed as a string.

• Default: '0'

reload_count

Settings for reload-count in nscd.conf. See nscd.conf(5). Must be a number expressed as a string or 'unlimited'.

• Default: '5'

paranoia

Setting for paranoia in nscd.conf. See nscd.conf(5). Must be 'yes' or 'no'.

• Default: 'no'

restart_interval

Setting for restart-interval in nscd.conf. See nscd.conf(5). Must be a number expressed as a string.

• Default: '3600'

Per service nscd.conf settings

---

enable_db_passwd

Switch to show passwd section in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS', based on OS platform

enable_db_group

Switch to show group section in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS', based on OS platform

enable_db_hosts

Switch to show hosts section in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS', based on OS platform

enable_db_services

Switch to show services section in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS', based on OS platform

enable_db_netgroup

Switch to show netgroup section in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS', based on OS platform

enable_db_audit_user

Settings for enable_db_audit_user in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_auth_attr

Settings for enable_db_auth_attr in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_bootparams

Settings for enable_db_bootparams in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_ethers

Settings for enable_db_ethers in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_exec_attr

Settings for enable_db_exec_attr in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_ipnodes

Settings for enable_db_ipnodes in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_netmasks

Settings for enable_db_netmasks in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_networks

Settings for enable_db_networks in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_printers

Settings for enable_db_printers in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_prof_attr

Settings for enable_db_prof_attr in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_project

Settings for enable_db_project in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_protocols

Settings for enable_db_protocols in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_rpc

Settings for enable_db_rpc in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_tnrhdb

Settings for enable_db_tnrhdb in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_tnrhtp

Settings for enable_db_tnrhtp in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_db_user_attr

Settings for enable_db_user_attr in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

enable_opt_auto_propagate

Settings for enable_opt_auto_propagate in nscd.conf. Allows for boolean, 'true', or 'false'.

• Default: 'USE_DEFAULTS'

passwd_enable_cache

Settings for enable-cache passwd in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

passwd_positive_time_to_live

Settings for positive-time-to-live passwd in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '600'

passwd_negative_time_to_live

Settings for negative-time-to-live passwd in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

passwd_keep_hot_count

Settings for keep-hot-count passwd in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

passwd_suggested_size

Settings for suggested-size passwd in nscd.conf. Must be a number expressed as a string.

• Default: '211'

passwd_check_files

Settings for check-files passwd in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

passwd_persistent

Settings for persistent passwd in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

passwd_shared

Settings for shared passwd in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

passwd_max_db_size

Settings for max-db-size passwd in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

passwd_auto_propagate

Settings for auto-propagate passwd in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

group_enable_cache

Settings for enable-cache group in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

group_positive_time_to_live

Settings for positive-time-to-live group in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

group_negative_time_to_live

Settings for negative-time-to-live group in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '60'

group_keep_hot_count

Settings for keep-hot-count group in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

group_suggested_size

Settings for suggested-size group in nscd.conf. Must be a number expressed as a string.

• Default: '211'

group_check_files

Settings for check-files group in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

group_persistent

Settings for persistent group in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

group_shared

Settings for shared group in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

group_max_db_size

Settings for max-db-size group in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

group_auto_propagate

Settings for auto-propagate group in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

hosts_enable_cache

Settings for enable-cache hosts in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

hosts_positive_time_to_live

Settings for positive-time-to-live hosts in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

hosts_negative_time_to_live

Settings for negative-time-to-live hosts in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

hosts_keep_hot_count

Settings for keep-hot-count hosts in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

hosts_suggested_size

Settings for suggested-size hosts in nscd.conf. Must be a number expressed as a string.

• Default: '211'

hosts_check_files

Settings for check-files hosts in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

hosts_persistent

Settings for persistent hosts in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

hosts_shared

Settings for shared hosts in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

hosts_max_db_size

Settings for max-db-size hosts in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

services_enable_cache

Settings for enable-cache services in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

services_positive_time_to_live

Settings for positive-time-to-live services in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '28800'

services_negative_time_to_live

Settings for negative-time-to-live services in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

services_keep_hot_count

Settings for keep-hot-count services in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

services_suggested_size

Settings for suggested-size services in nscd.conf. Must be a number expressed as a string.

• Default: '211'

services_check_files

Settings for check-files services in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

services_persistent

Settings for persistent services in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

services_shared

Settings for shared services in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

services_max_db_size

Settings for max-db-size servicess in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

netgroup_enable_cache

Settings for enable-cache netgroup in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netgroup_positive_time_to_live

Settings for positive-time-to-live netgroup in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '28800'

netgroup_negative_time_to_live

Settings for negative-time-to-live netgroup in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

netgroup_suggested_size

Settings for suggested-size netgroup in nscd.conf. Must be a number expressed as a string.

• Default: '211'

netgroup_check_files

Settings for check-files netgroup in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netgroup_persistent

Settings for persistent netgroup in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netgroup_shared

Settings for shared netgroup in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netgroup_max_db_size

Settings for max-db-size netgroup in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

audit_user_enable_cache

Settings for enable-cache audit_user in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

audit_user_positive_time_to_live

Settings for positive-time-to-live audit_user in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

audit_user_negative_time_to_live

Settings for negative-time-to-live audit_user in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

audit_user_keep_hot_count

Settings for keep-hot-count audit_user in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

audit_user_suggested_size

Settings for suggested-size audit_user in nscd.conf. Must be a number expressed as a string.

• Default: '211'

audit_user_check_files

Settings for check-files audit_user in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

audit_user_persistent

Settings for persistent audit_user in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

audit_user_shared

Settings for shared audit_user in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

audit_user_max_db_size

Settings for max-db-size audit_user in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

audit_user_auto_propagate

Settings for auto-propagate audit_user in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

auth_attr_enable_cache

Settings for enable-cache auth_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

auth_attr_positive_time_to_live

Settings for positive-time-to-live auth_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

auth_attr_negative_time_to_live

Settings for negative-time-to-live auth_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

auth_attr_keep_hot_count

Settings for keep-hot-count auth_attr in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

auth_attr_suggested_size

Settings for suggested-size auth_attr in nscd.conf. Must be a number expressed as a string.

• Default: '211'

auth_attr_check_files

Settings for check-files auth_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

auth_attr_persistent

Settings for persistent auth_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

auth_attr_shared

Settings for shared auth_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

auth_attr_max_db_size

Settings for max-db-size auth_attr in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

auth_attr_auto_propagate

Settings for auto-propagate auth_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

bootparams_enable_cache

Settings for enable-cache bootparams in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

bootparams_positive_time_to_live

Settings for positive-time-to-live bootparams in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

bootparams_negative_time_to_live

Settings for negative-time-to-live bootparams in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

bootparams_keep_hot_count

Settings for keep-hot-count bootparams in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

bootparams_suggested_size

Settings for suggested-size bootparams in nscd.conf. Must be a number expressed as a string.

• Default: '211'

bootparams_check_files

Settings for check-files bootparams in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

bootparams_persistent

Settings for persistent bootparams in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

bootparams_shared

Settings for shared bootparams in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

bootparams_max_db_size

Settings for max-db-size bootparams in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

bootparams_auto_propagate

Settings for auto-propagate bootparams in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ethers_enable_cache

Settings for enable-cache ethers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ethers_positive_time_to_live

Settings for positive-time-to-live ethers in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

ethers_negative_time_to_live

Settings for negative-time-to-live ethers in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

ethers_keep_hot_count

Settings for keep-hot-count ethers in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

ethers_suggested_size

Settings for suggested-size ethers in nscd.conf. Must be a number expressed as a string.

• Default: '211'

ethers_check_files

Settings for check-files ethers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ethers_persistent

Settings for persistent ethers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ethers_shared

Settings for shared ethers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ethers_max_db_size

Settings for max-db-size ethers in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

ethers_auto_propagate

Settings for auto-propagate ethers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

exec_attr_enable_cache

Settings for enable-cache exec_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

exec_attr_positive_time_to_live

Settings for positive-time-to-live exec_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

exec_attr_negative_time_to_live

Settings for negative-time-to-live exec_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

exec_attr_keep_hot_count

Settings for keep-hot-count exec_attr in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

exec_attr_suggested_size

Settings for suggested-size exec_attr in nscd.conf. Must be a number expressed as a string.

• Default: '211'

exec_attr_check_files

Settings for check-files exec_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

exec_attr_persistent

Settings for persistent exec_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

exec_attr_shared

Settings for shared exec_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

exec_attr_max_db_size

Settings for max-db-size exec_attr in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

exec_attr_auto_propagate

Settings for auto-propagate exec_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ipnodes_enable_cache

Settings for enable-cache ipnodes in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ipnodes_positive_time_to_live

Settings for positive-time-to-live ipnodes in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

ipnodes_negative_time_to_live

Settings for negative-time-to-live ipnodes in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

ipnodes_keep_hot_count

Settings for keep-hot-count ipnodes in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

ipnodes_suggested_size

Settings for suggested-size ipnodes in nscd.conf. Must be a number expressed as a string.

• Default: '211'

ipnodes_check_files

Settings for check-files ipnodes in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ipnodes_persistent

Settings for persistent ipnodes in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ipnodes_shared

Settings for shared ipnodes in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

ipnodes_max_db_size

Settings for max-db-size ipnodes in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

ipnodes_auto_propagate

Settings for auto-propagate ipnodes in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netmasks_enable_cache

Settings for enable-cache netmasks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netmasks_positive_time_to_live

Settings for positive-time-to-live netmasks in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

netmasks_negative_time_to_live

Settings for negative-time-to-live netmasks in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

netmasks_keep_hot_count

Settings for keep-hot-count netmasks in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

netmasks_suggested_size

Settings for suggested-size netmasks in nscd.conf. Must be a number expressed as a string.

• Default: '211'

netmasks_check_files

Settings for check-files netmasks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netmasks_persistent

Settings for persistent netmasks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netmasks_shared

Settings for shared netmasks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

netmasks_max_db_size

Settings for max-db-size netmasks in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

netmasks_auto_propagate

Settings for auto-propagate netmasks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

networks_enable_cache

Settings for enable-cache networks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

networks_positive_time_to_live

Settings for positive-time-to-live networks in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

networks_negative_time_to_live

Settings for negative-time-to-live networks in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

networks_keep_hot_count

Settings for keep-hot-count networks in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

networks_suggested_size

Settings for suggested-size networks in nscd.conf. Must be a number expressed as a string.

• Default: '211'

networks_check_files

Settings for check-files networks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

networks_persistent

Settings for persistent networks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

networks_shared

Settings for shared networks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

networks_max_db_size

Settings for max-db-size networks in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

networks_auto_propagate

Settings for auto-propagate networks in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

printers_enable_cache

Settings for enable-cache printers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

printers_positive_time_to_live

Settings for positive-time-to-live printers in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

printers_negative_time_to_live

Settings for negative-time-to-live printers in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

printers_keep_hot_count

Settings for keep-hot-count printers in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

printers_suggested_size

Settings for suggested-size printers in nscd.conf. Must be a number expressed as a string.

• Default: '211'

printers_check_files

Settings for check-files printers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

printers_persistent

Settings for persistent printers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

printers_shared

Settings for shared printers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

printers_max_db_size

Settings for max-db-size printers in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

printers_auto_propagate

Settings for auto-propagate printers in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

prof_attr_enable_cache

Settings for enable-cache prof_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

prof_attr_positive_time_to_live

Settings for positive-time-to-live prof_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

prof_attr_negative_time_to_live

Settings for negative-time-to-live prof_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

prof_attr_keep_hot_count

Settings for keep-hot-count prof_attr in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

prof_attr_suggested_size

Settings for suggested-size prof_attr in nscd.conf. Must be a number expressed as a string.

• Default: '211'

prof_attr_check_files

Settings for check-files prof_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

prof_attr_persistent

Settings for persistent prof_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

prof_attr_shared

Settings for shared prof_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

prof_attr_max_db_size

Settings for max-db-size prof_attr in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

prof_attr_auto_propagate

Settings for auto-propagate prof_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

project_enable_cache

Settings for enable-cache project in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

project_positive_time_to_live

Settings for positive-time-to-live project in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

project_negative_time_to_live

Settings for negative-time-to-live project in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

project_keep_hot_count

Settings for keep-hot-count project in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

project_suggested_size

Settings for suggested-size project in nscd.conf. Must be a number expressed as a string.

• Default: '211'

project_check_files

Settings for check-files project in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

project_persistent

Settings for persistent project in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

project_shared

Settings for shared project in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

project_max_db_size

Settings for max-db-size project in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

project_auto_propagate

Settings for auto-propagate project in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

protocols_enable_cache

Settings for enable-cache protocols in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

protocols_positive_time_to_live

Settings for positive-time-to-live protocols in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

protocols_negative_time_to_live

Settings for negative-time-to-live protocols in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

protocols_keep_hot_count

Settings for keep-hot-count protocols in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

protocols_suggested_size

Settings for suggested-size protocols in nscd.conf. Must be a number expressed as a string.

• Default: '211'

protocols_check_files

Settings for check-files protocols in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

protocols_persistent

Settings for persistent protocols in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

protocols_shared

Settings for shared protocols in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

protocols_max_db_size

Settings for max-db-size protocols in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

protocols_auto_propagate

Settings for auto-propagate protocols in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

rpc_enable_cache

Settings for enable-cache rpc in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

rpc_positive_time_to_live

Settings for positive-time-to-live rpc in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

rpc_negative_time_to_live

Settings for negative-time-to-live rpc in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

rpc_keep_hot_count

Settings for keep-hot-count rpc in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

rpc_suggested_size

Settings for suggested-size rpc in nscd.conf. Must be a number expressed as a string.

• Default: '211'

rpc_check_files

Settings for check-files rpc in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

rpc_persistent

Settings for persistent rpc in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

rpc_shared

Settings for shared rpc in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

rpc_max_db_size

Settings for max-db-size rpc in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

rpc_auto_propagate

Settings for auto-propagate rpc in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhdb_enable_cache

Settings for enable-cache tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhdb_positive_time_to_live

Settings for positive-time-to-live tnrhdb in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

tnrhdb_negative_time_to_live

Settings for negative-time-to-live tnrhdb in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

tnrhdb_keep_hot_count

Settings for keep-hot-count tnrhdb in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

tnrhdb_suggested_size

Settings for suggested-size tnrhdb in nscd.conf. Must be a number expressed as a string.

• Default: '211'

tnrhdb_check_files

Settings for check-files tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhdb_persistent

Settings for persistent tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhdb_shared

Settings for shared tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhdb_max_db_size

Settings for max-db-size tnrhdb in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

tnrhdb_auto_propagate

Settings for auto-propagate tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhtp_enable_cache

Settings for enable-cache tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhtp_positive_time_to_live

Settings for positive-time-to-live tnrhdb in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

tnrhtp_negative_time_to_live

Settings for negative-time-to-live tnrhdb in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

tnrhtp_keep_hot_count

Settings for keep-hot-count tnrhdb in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

tnrhtp_suggested_size

Settings for suggested-size tnrhdb in nscd.conf. Must be a number expressed as a string.

• Default: '211'

tnrhtp_check_files

Settings for check-files tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhtp_persistent

Settings for persistent tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhtp_shared

Settings for shared tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

tnrhtp_max_db_size

Settings for max-db-size tnrhdb in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

tnrhtp_auto_propagate

Settings for auto-propagate tnrhdb in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

user_attr_enable_cache

Settings for enable-cache user_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

user_attr_positive_time_to_live

Settings for positive-time-to-live user_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '3600'

user_attr_negative_time_to_live

Settings for negative-time-to-live user_attr in nscd.conf. Must be a number in seconds expressed as a string.

• Default: '20'

user_attr_keep_hot_count

Settings for keep-hot-count user_attr in nscd.conf. Must be a number expressed as a string.

• Default: '2048'

user_attr_suggested_size

Settings for suggested-size user_attr in nscd.conf. Must be a number expressed as a string.

• Default: '211'

user_attr_check_files

Settings for check-files user_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

user_attr_persistent

Settings for persistent user_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

user_attr_shared

Settings for shared user_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'

user_attr_max_db_size

Settings for max-db-size user_attr in nscd.conf. Must be a number in bytes expressed as a string.

• Default: '33554432'

user_attr_auto_propagate

Settings for auto-propagate user_attr in nscd.conf. Must be 'yes' or 'no'.

• Default: 'yes'