Fix home issue

Possible fix for MarlinFirmware#7 and MarlinFirmware#8
maz3max · Jan 2, 2019 · f877f12 · f877f12
1 parent 1a8f4e8
commit f877f12
Show file tree

Hide file tree

Showing 9 changed files with 23,676 additions and 7,894 deletions.
diff --git a/Marlin-AI3M-181231-TMC2208.hex → Marlin-AI3M-190102-TMC2208.hex b/Marlin-AI3M-181231-TMC2208.hex → Marlin-AI3M-190102-TMC2208.hex
diff --git a/Marlin-AI3M-181231-TMC2208_reversed.hex → Marlin-AI3M-190102-TMC2208_reversed.hex b/Marlin-AI3M-181231-TMC2208_reversed.hex → Marlin-AI3M-190102-TMC2208_reversed.hex
diff --git a/Marlin-AI3M-181231-stock_drivers.hex → Marlin-AI3M-190102-stock_drivers.hex b/Marlin-AI3M-181231-stock_drivers.hex → Marlin-AI3M-190102-stock_drivers.hex
diff --git a/Marlin/AnycubicTFT.cpp b/Marlin/AnycubicTFT.cpp
@@ -203,7 +203,7 @@ void AnycubicTFTClass::HandleSpecialMenu()
     SpecialMenu=true;
   } else if (strcmp(SelectedDirectory, "<auto tune hotend pid>")==0) {
     SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune Hotend PID");
-    enqueue_and_echo_commands_P(PSTR("M106 S178\nM303 E0 S210 C6 U1"));
+    enqueue_and_echo_commands_P(PSTR("M106 S204\nM303 E0 S210 C6 U1"));
   } else if (strcmp(SelectedDirectory, "<auto tune hotbed pid>")==0) {
     SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune Hotbed Pid");
     enqueue_and_echo_commands_P(PSTR("M303 E-1 S60 C6 U1"));
@@ -212,7 +212,7 @@ void AnycubicTFTClass::HandleSpecialMenu()
     enqueue_and_echo_commands_P(PSTR("M500"));
   } else if (strcmp(SelectedDirectory, "<load fw defaults>")==0) {
     SERIAL_PROTOCOLLNPGM("Special Menu: Load FW Defaults");
-    enqueue_and_echo_commands_P(PSTR("M501"));
+    enqueue_and_echo_commands_P(PSTR("M502"));
   } else if (strcmp(SelectedDirectory, "<preheat bed>")==0) {
     SERIAL_PROTOCOLLNPGM("Special Menu: Preheat Bed");
     enqueue_and_echo_commands_P(PSTR("M140 S60"));

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -629,7 +629,7 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 2000, 2000,  60, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 3000, 2000,  60, 10000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s
@@ -640,8 +640,8 @@
  *   M204 T    Travel Acceleration
  */
 #define DEFAULT_ACCELERATION          1200    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   2000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk (mm/s)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -281,7 +281,7 @@
 
 // If you want endstops to stay on (by default) even when not homing
 // enable this option. Override at any time with M120, M121.
-//#define ENDSTOPS_ALWAYS_ON_DEFAULT
+#define ENDSTOPS_ALWAYS_ON_DEFAULT
 
 // @section extras