odxtools is a set of utilities for working with diagnostic
descriptions of automotive electronic control units using the data
model and the associated technologies of the ODX standard.
ODX stands for "Open Diagnostic data eXchange" and is primarily an XML based file format to describe the diagnostic capabilities of the electronic control units (ECUs) of complex distributed technical systems (usually cars and trucks). ODX is an open standard maintained by ASAM e.V. and is also standardized internationally by ISO-22901.
Usually, ODX is used to complement the UDS automotive diagnostics standard -- which itself can be considered to be an extension of OBD-II -- to provide a machine-processable description of the vendor-specific diagnostics functionality of a vehicle's ECUs. That said, the functionality which is described by ODX files neither needs to be a super- nor a subset of OBD-II/UDS, e.g., ODX can be used to describe diagnostic functionality that uses fundamentally different wire formats and conventions than the ones mandated by OBD-II/UDS. (In practice, the ODX-described functionality usually adheres to these standards, though.)
The functionality provided by odxtools encompasses parsing and
internalizing ODX diagnostic database files as well as de- and
encoding the data of diagnostic requests and their responses
send to/received from ECUs in an pythonic manner.
- Use Cases
- Installation
- Usage Examples
- Using the non-strict mode
- Interactive Usage
- Command line usage
- Testing
- Contributing
- Code of Conduct
- Provider Information
- Acknowledgements
- License
Here are some of the intended use cases of odxtools:
- Prototype development: Interacting with the diagnostic services of electronic control units directly from python (requires taping into the car's relevant CAN or ethernet bus)
- End-of-production calibration/quality control: Initial set up and running a self diagnosis of newly produced cars to ensure that everything works as specified
- After-sales: Implementing servicing functionality for workshops, i.e., defining test schedules based on the legally mandated functionality of ISO 15031-6 (OBD II) as well as manufacturer-specific routines
- Prototype development (II): Analyzing and debugging diagnostic sessions done using third-party software
- Prototype development (III): Implementing bridges to higher-level protocols such as HTTP
- Development for mass production: Accelerating the implementation of
diagnostic servicesfor low-cost ECUs by using
odxtools-based code generators for the diagnostic glue code on system-level languages like C++ or rust
Please be aware that some of the use cases listed above are currently rather aspirational.
The easiest way of installing odxtools on your system is via pip:
python3 -m pip install odxtoolsIf you want to develop odxtools itself, you need to install it from
source using git. The first step is to clone the repository:
cd $BASE_DIR
git clone https://github.com/mercedes-benz/odxtoolsAfter this, make sure that all python dependencies are installed:
cd $BASE_DIR/odxtools
python3 -m pip install -e .Next, you can optionally build a package and install it on the system:
cd $BASE_DIR/odxtools
python3 -m pip install --upgrade build
python3 -m build
sudo python3 -m pip install dist/odxtools-*.whlFinally, update the PYTHONPATH environment variable and the newly
cloned module is ready to be used:
export PYTHONPATH="$BASE_DIR/odxtools:$PYTHONPATH"Now, you can check whether the installation worked:
python3 -m odxtools list -a "$YOUR_PDX_FILE"-
Load an ODX database from file
somersault.pdx:import odxtools db = odxtools.load_pdx_file("somersault.pdx")
-
List the names of all available services of the
somersault_lazyECU:# [...] ecu = db.ecus.somersault_lazy print(f"Available services for {ecu.short_name}: {ecu.services}")
-
Determine the CAN IDs which the
somersault_lazyECU uses to send and receive diagnostic messages:# [...] print(f"ECU {ecu.short_name} listens for requests on CAN ID 0x{ecu.get_can_receive_id():x}") print(f"ECU {ecu.short_name} transmits responses on CAN ID 0x{ecu.get_can_send_id():x}")
-
Encode a
session_startrequest to thesomersault_lazyECU:# [...] raw_request_data = ecu.services.session_start() print(f"Message for session start request of ECU {ecu.short_name}: {raw_request_data}") # -> bytearray(b'\x10\x00')
-
Print all mutable parameters of the
session_startservice's first positive response:# [...] ecu.services.session_start.positive_responses[0].print_free_parameters_info()
-
Encode the positive response to the
start_sessionrequest:# [...] raw_request_data = ecu.services.session_start() raw_response_data = ecu.services.session_start.positive_responses[0].encode(can_do_backward_flips="true", coded_request=raw_request_data) print(f"Positive response to session_start() of ECU {ecu.short_name}: {raw_response_data.hex(' ')}") # -> Positive response to session_start() of ECU somersault_lazy: 50 01
-
Decode a request:
# [...] raw_data = b"\x10\x00" decoded_message = ecu.decode(raw_data) for x in decoded_message: print(f"decoded as '{x.coding_object.short_name}': {x.param_dict}") # -> decoded as 'start_session': {'sid': 16, 'id': 0}
-
Decode a response to a request:
# [...] raw_request_data = bytes.fromhex("1000") raw_response_data = bytes.fromhex("5001") decoded_response = ecu.decode_response(raw_response_data, raw_request_data) for x in decoded_response: print(f"decoded as '{x.coding_object.short_name}': {x.param_dict}") # -> decoded as 'session': {'sid': 80, 'can_do_backward_flips': 'true'}
By default, odxtools raises exceptions if it suspects that it cannot fulfill a requested operation correctly. For example, if the dataset it is instructed to load is detected to be not conformant with the ODX specification, or if completing the operation requires missing features of odxtools. To be able to deal with such cases, odxtools provides a "non-strict" mode where such issues are ignored, but where the results are undefined. The following snippet shows how to instruct odxtools to load a non-conforming file in non-strict mode, and after this is done, enables the safety checks again:
import odxtools
[...]
odxtools.exceptions.strict_mode = False
botched_db = odxtools.load_file("my_non-conforming_database.pdx")
odxtools.exceptions.strict_mode = True
[...]python's interactive read-reval-print-loop (REPL) supports
tab-completion on most plattforms, i.e., in this case, all data can be
conveniently interactivly discovered and this makes odxtools a very
convenient tool to explore the capabilities of a given ECU.
A notable exception is the Microsoft Windows platform: Most python
distribtions for Windows do not enable tab-completion by default in
their REPL. For more convenience in such a scenario, we recommend
using
ptpython. ptpython
can be installed like any other python package, i.e., via python3 -m pip install ptpython. Then, the REPL ought to be started using
c:\odxtest>python3 "C:\Python39\Lib\site-packages\ptpython\entry_points\run_ptpython.py"Alternatively, pyreadline can be used after installing it via
python3 -m pip install pyreadline. With this, basic
tab-completion for python under Windows in Interactive
Mode
should work.
Based the python module, odxtools also provides a set of command
line utilities for quick interactive explorations. Amongst others,
these utilities allow the inspection ODX/PDX files, snooping on
diagnostic sessions, etc. If odxtools is installed on a system-wide
basis, these commands can be invoked using odxtools SUBCOMMAND [PARAMS], if the repository has been manually cloned via git and
odxtools has not been installed on a system-wide basis, the way to
invoke these utilities is via python3 -m odxtools SUBCOMMAND [PARAMS].
Available generic parameters and a list of subcommands can be obtained
using odxtools --help:
$ odxtools --help
usage: odxtools [-h] [--version] {list,browse,snoop,find,decode,compare} ...
Utilities to interact with automotive diagnostic descriptions based on the ODX standard.
Examples:
For printing all services use:
odxtools list ./path/to/database.pdx --services
For browsing the data base and encoding messages use:
odxtools browse ./path/to/database.pdx
positional arguments:
{list,browse,snoop,find,decode,compare}
Select a sub command
list Print a summary of automotive diagnostic files.
browse Interactively browse the content of automotive diagnostic files.
snoop Live decoding of a diagnostic session.
find Find & display services by their name
decode Find & print service by hex-data. Can also decode the hex-data to its named parameters.
compare Compares two ecu versions or databases with each other. Checks whether diagnostic services and its parameters have changed.
optional arguments:
-h, --help show this help message and exit
--version Print the odxtools versionAll subcommands accept the --help parameter:
$ odxtools list --help
usage: odxtools list [-h] [-v VARIANT [VARIANT ...]] [-s [SERVICE [SERVICE ...]]] [-p] [-d] [-a] PDX_FILE
[...]It follows is an inexhaustive list of the subcommands that are currently available:
The list subcommand is used to parse a .pdx database file and
print the relevant parts of its content to the terminal.
$ odxtools list -h
usage: odxtools list [-h] [-v VARIANT [VARIANT ...]] [-g] [-s [SERVICE [SERVICE ...]]] [-p] [-d] [-a] [-po] PDX_FILE
List the content of automotive diagnostic files (*.pdx)
Examples:
For displaying only the names of the diagnostic layers use:
odxtools list ./path/to/database.pdx
For displaying all content use:
odxtools list ./path/to/database.pdx --all
For more information use:
odxtools list -h
positional arguments:
PDX_FILE path to the .pdx file
optional arguments:
-h, --help show this help message and exit
-v VARIANT [VARIANT ...], --variants VARIANT [VARIANT ...]
Specifies which variants should be included.
-g, --global-negative-responses
Print a list of the global negative responses for the selected ECUs.
-s [SERVICE [SERVICE ...]], --services [SERVICE [SERVICE ...]]
Print a list of diagnostic services specified in the pdx.
If no service names are specified, all services are printed.
-p, --params Print a list of all parameters relevant for the selected items.
-d, --dops Print a list of all data object properties relevant for the selected items
-a, --all Print a list of all diagnostic services and DOPs specified in the pdx
-po, --plumbing-output
Print full objects instead of selected and formatted attributesThe options --variants and --services can be used to specify which services should be printed.
If the --params option is specified, the message layout and information about the service parameters (reuest as well as responses) are printed for all specified variants/services.
If the --global-negative-responses option is specified, all global negative responses are printed for all specified variants.
If the --dops option is specified, a list of all data object properties (their names) is printed for all specified variants/services.
With the parameter --all all data of the file that is recognized by odxtools is printed.
The default output does not display all information of the specified objects but a selection. To see all object information choose the parameter --plumbing-output.
Example:
$ odxtools list $BASE_DIR/odxtools/examples/somersault.pdx --variants somersault_lazy --services do_forward_flips --params
Overview of diagnostic layers:
| Name | Variant Type | Num. of Services | Num. of DOPs | Num. of comparams
----+-----------------+--------------+------------------+--------------+-------------------
0 | somersault_lazy | ECU-VARIANT | 5 | 10 | 10
Diagnostic layer: 'somersault_lazy'
Variant Type: ECU-VARIANT
Description: Sloppy variant of the somersault ECU (lazy < assiduous)
The services of 'somersault_lazy' are:
do_forward_flips <ID: OdxLinkId('somersault.service.do_forward_flips')>
Service description: Do a forward flip.
Request Properties:
Request Name: do_forward_flips
Byte-Array: --- Hex-String: 0x---
Service Parameters: [sid, forward_soberness_check, num_flips]
| Name | Byte Pos. | Bit Length | Param. Type | Data Type | Value | Value Desc. | Linked DOP
----+-------------------------+-----------+------------+-------------+-----------+-------+-------------+-----------------
0 | sid | 0 | 8 | CODED-CONST | A_UINT32 | 0xBA | coded value |
1 | forward_soberness_check | 1 | 8 | VALUE | A_UINT32 | | | soberness_check
2 | num_flips | 2 | 8 | VALUE | A_UINT32 | | | num_flips
Message format of a request:
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | forward_soberness_check(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
2 | num_flips(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
Positive Response Properties:
Number of Positive Responses: 1
Positive Responses: [grudging_forward]
Service Parameters: [sid, num_flips_done]
| Name | Byte Pos. | Bit Length | Parameter Type | Data Type | Value | Value Desc. | Linked DOP
----+----------------+-----------+------------+------------------------+-----------+-------+-------------+-------------
0 | sid | 0 | 8 | CODED-CONST | A_UINT32 | 0xFA | coded value |
1 | num_flips_done | 1 | 8 | MATCHING-REQUEST-PARAM | | | |
Message format of a positive response:
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | num_flips_done(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
Negative Response Properties:
Number of Negative Responses: 1
Negative Responses: [flips_not_done]
Service Parameters: [sid, rq_sid, reason, flips_successfully_done]
| Name |Byte Pos. | Bit Length | Parameter Type | Data Type | Value | Value Desc. | Linked DOP
----+-------------------------+----------+------------+------------------------+-----------+-----------+-------------+-------------
0 | sid | 0 | 8 | CODED-CONST | A_UINT32 | 0x7F | coded value |
1 | rq_sid | 1 | 8 | MATCHING-REQUEST-PARAM | | | |
2 | reason | 2 | 8 | NRC-CONST | A_UINT32 | [0, 1, 2] | coded value |
3 | flips_successfully_done | 3 | 8 | VALUE | A_UINT32 | | | num_flips
Number of negative responses: 1
Message format of a negative response:
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | rq_sid(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
2 | reason(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
3 | flips_successfully_done(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
The browse subcommand uses
InquirerPy to interactively
navigate through the database of a .pdx file. For example, using the
browse subcommand you can select the ECU and service without
spamming the terminal:
$ odxtools browse $BASE_DIR/odxtools/examples/somersault.pdx
? Select a Variant. somersault_lazy
ECU-VARIANT 'somersault_lazy' (Receive ID: 0x7b, Send ID: 0x1c8)
? The variant somersault_lazy offers the following services. Select one! do_forward_flips
? This service offers the following messages. Request: do_forward_flips
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | forward_soberness_check(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
2 | num_flips(8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
Parameter(short_name='sid', type='CODED-CONST', semantic=None, byte_position=0, bit_length=8, coded_value='0xba')
Parameter(short_name='forward_soberness_check', type='VALUE', semantic=None, byte_position=1, bit_length=8, dop_ref='somersault.DOP.soberness_check')
DataObjectProperty('soberness_check', category='LINEAR', internal_type='A_UINT32', physical_type='A_UINT32')
Parameter(short_name='num_flips', type='VALUE', semantic=None, byte_position=2, bit_length=8, dop_ref='somersault.DOP.num_flips')
DataObjectProperty('num_flips', category='LINEAR', internal_type='A_UINT32', physical_type='A_UINT32')
[...]The snoop subcommand can be used to decode a trace of a or a
currently running diagnostic session.
$ odxtools snoop -h
usage: odxtools snoop [-h] [--active] [--channel CHANNEL] [--rx RX] [--tx TX] [--variant VARIANT]
[--protocol PROTOCOL]
PDX_FILE
Live decoding of a diagnostic session.
positional arguments:
PDX_FILE path to the .pdx file
options:
-h, --help show this help message and exit
--active, -a Active mode, sends flow control messages to receive ISO-TP telegrams successfully
--channel CHANNEL, -c CHANNEL
CAN interface name to be used (required in active mode)
--rx RX, -r RX CAN ID in which the ECU listens for diagnostic messages
--tx TX, -t TX CAN ID in which the ECU sends replys to diagnostic messages (required in active mode)
--variant VARIANT, -v VARIANT
Name of the ECU variant which the decode process ought to be based on
--protocol PROTOCOL, -p PROTOCOL
Name of the protocol used for decodingExample:
# create a socketcan `vcan0` interface
sudo ip link add dev vcan0 type vcan
sudo ip link set vcan0 up
# start the snooping on vcan0
odxtools snoop -c vcan0 --variant "somersault_lazy" $BASE_DIR/odxtools/examples/somersault.pdx
# on a different terminal, run the diagnostic session
$BASE_DIR/odxtools/examples/somersaultlazy.py -c vcan0The snoop command will then output the following:
$ odxtools snoop -c vcan0 --variant "somersault_lazy" $BASE_DIR/odxtools/examples/somersault.pdx
Decoding messages on channel vcan0
Tester: do_forward_flips(forward_soberness_check=18, num_flips=1)
-> 7fba7f (bytearray(b'\x7f\xba\x7f'), 3 bytes)
Tester: start_session()
-> session()
Tester: do_forward_flips(forward_soberness_check=18, num_flips=1)
-> grudging_forward(num_flips_done=bytearray(b'\x01'))
Tester: do_forward_flips(forward_soberness_check=35, num_flips=1)
-> flips_not_done(rq_sid=bytearray(b'\xba'), reason=0, flips_successfully_done=0)
Tester: do_forward_flips(forward_soberness_check=18, num_flips=3)
-> grudging_forward(num_flips_done=bytearray(b'\x03'))
Tester: do_forward_flips(forward_soberness_check=18, num_flips=50)
-> flips_not_done(rq_sid=bytearray(b'\xba'), reason=1, flips_successfully_done=6)The find subcommand can be used to find a service and its associated information by a partial name via cli.
$ odxtools find -h
usage: odxtools find [-h] [-v VARIANT] -s [SERVICES ...] [-nd] [-ro] [-po] PDX_FILE
Find & print services by name
Examples:
For displaying the services associated with the partial name 'Reset' without details:
odxtools find ./path/to/database.pdx -s "Reset" --no-details
For more information use:
odxtools find -h
positional arguments:
PDX_FILE Location of the .pdx file
options:
-h, --help show this help message and exit
-v VARIANT, --variants VARIANT
Specifies which ecu variants should be included.
-s [SERVICES ...], --service-names [SERVICES ...]
Print a list of diagnostic services partially matching given service names
-nd, --no-details Don't show all service details
-ro, --relaxed-output
Relax output formatting rules (allow unknown bitlengths for ascii representation)
-po, --plumbing-output
Print full objects instead of selected and formatted attributesExample: Find diagnostic services with the name session_start
$ odxtools find $BASE_DIR/odxtools/examples/somersault.pdx -s session_start
=====================================
somersault_lazy, somersault_assiduous
=====================================
session_start <ID: OdxLinkId('somersault.service.session_start')>
Request Properties:
Request Name: start_session
Byte-Array: bytearray(b'\x10\x00') Hex-String: 0x1000
Service Parameters: [sid, id]
| Name | Byte Pos. | Bit Length | Param. Type | Data Type | Value | Value Desc. | Linked DOP
----+------+-----------+------------+-------------+-----------+-------+-------------+------------
0 | sid | 0 | 8 | CODED-CONST | A_UINT32 | 0x10 | coded value |
1 | id | 1 | 8 | CODED-CONST | A_UINT32 | 0x00 | coded value |
Message format of a request:
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | id (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
Positive Response Properties:
Number of Positive Responses: 1
Positive Responses: [session]
Service Parameters: [sid, can_do_backward_flips]
| Name | Byte Pos. | Bit Length | Param. Type | Data Type | Value | Value Desc. | Linked DOP
----+-----------------------+-----------+------------+-------------+------------------+-------+-------------+------------
0 | sid | 0 | 8 | CODED-CONST | A_UINT32 | 0x50 | coded value |
1 | can_do_backward_flips | 1 | 8 | VALUE | A_UNICODE2STRING | | | boolean
Message format of a positive response:
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | can_do_backward_flips (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
Negative Response Properties:
Number of Negative Responses: 1
Negative Responses: [general_negative_response]
Service Parameters: [sid, rq_sid, response_code]
| Name | Byte Pos.| Bit Length | Parameter Type | Data Type | Value | Value Desc. | Linked DOP
----+---------------+----------+------------+------------------------+-----------+-------+-------------+------------
0 | sid | 0 | 8 | CODED-CONST | A_UINT32 | 0x7F | coded value |
1 | rq_sid | 1 | 8 | MATCHING-REQUEST-PARAM | | | |
2 | response_code | 2 | 8 | VALUE | A_UINT32 | | | error_code
Message format of a negative response:
7 6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+-----+
0 | sid (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
1 | rq_sid (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
2 | response_code (8 bits) |
+-----+-----+-----+-----+-----+-----+-----+-----+
The decode subcommand can be used to decode hex-data to a service, and its associated
parameters.
$ odxtools decode -h
usage: odxtools decode [-h] [-v VARIANT] -d DATA [-D] PDX_FILE
Decode request by hex-data
Examples:
For displaying the service associated with the request 10 01 & decoding it:
odxtools decode ./path/to/database.pdx -D -d '10 01'
For displaying the service associated with the request 10 01, without decoding it:
odxtools decode ./path/to/database.pdx -d '10 01'
For more information use:
odxtools decode -h
positional arguments:
PDX_FILE Location of the .pdx file
options:
-h, --help show this help message and exit
-v VARIANT, --variants VARIANT
Specifies which ecu variants should be included.
-d DATA, --data DATA Specify data of hex request
-D, --decode Decode the given hex dataExample: Decode diagnostic services with the request 10 00
$ odxtools decode $BASE_DIR/odxtools/examples/somersault.pdx -d '10 00'
Binary data: 10 00
Decoded by service 'session_start' (decoding ECUs: somersault_lazy, somersault_assiduous)Example: Decode diagnostic services with the request 10 00, and parameters
$ odxtools decode $BASE_DIR/odxtools/examples/somersault.pdx -d '10 00' -D
Binary data: 10 00
Decoded by service 'session_start' (decoding ECUs: somersault_lazy, somersault_assiduous)
Decoded data:
sid=16 (0x10)
id=0 (0x0)The compare subcommand can be used to compare databases (pdx-files) and diagnostic layers with each other. All diagnostic services as well as its parameters of specified databases and variants are compared with each other and changes are displayed.
- new diagnostic layers
- deleted diagnostic layers
- diagnostic layer comparison
- new services
- deleted services
- renamed services
- service parameter comparison
find changes in following properties:
- Name
- Byte Position
- Bit Length
- Semantic
- Parameter Type
- Coded Value
- Data Type
- Data Object Property (Name, Data Type, Bit Length, Default Value)
$ odxtools compare -h
usage: odxtools compare [-h] [-v VARIANT [VARIANT ...]] [-db DATABASE [DATABASE ...]] [-nd] [-od] PDX_FILE
Compares two ecu versions or databases with each other. Checks whether diagnostic services and its parameters have changed.
Examples:
Comparison of two ecu versions:
odxtools compare ./path/to/database.pdx -v variant1 variant2
Comparison of two database versions:
odxtools compare ./path/to/database.pdx -db ./path/to/old-database.pdx
For more information use:
odxtools compare -h
positional arguments:
PDX_FILE Location of the .pdx file
options:
-h, --help show this help message and exit
-v VARIANT [VARIANT ...], --variants VARIANT [VARIANT ...]
Compare specified ecu variants to each other.
-db DATABASE [DATABASE ...], --database DATABASE [DATABASE ...]
Compare specified database file(s) to database file of first input argument.
-nd, --no-details Don't show all service parameter details
-od, --object-details
Print all object details instead of just the nameExample: Compare the ecu variants somersault_lazy and somersault_assiduous
$ odxtools compare $BASE_DIR/odxtools/examples/somersault.pdx -v somersault_lazy somersault_assiduous
Overview of diagnostic layers:
| Name | Variant Type | Num. of Services | Num. of DOPs | Num. of comparams
----+----------------------+--------------+------------------+--------------+-------------------
0 | somersault_lazy | ECU-VARIANT | 5 | 10 | 10
1 | somersault_assiduous | ECU-VARIANT | 8 | 10 | 10
Changes in ecu variant somersault_lazy
(compared to somersault_assiduous)
Changed diagnostic services for ecu variant: somersault_lazy
Deleted services
| Name | Semantic | Hex-Request
----+----------------------+------------+---------------
0 | set_operation_params | FUNCTION |
1 | do_backward_flips | FUNCTION |
2 | headstand | UNKNOWN |Example: Compare two databases
$ odxtools compare $BASE_DIR/odxtools/examples/somersault_modified.pdx -db $BASE_DIR/odxtools/examples/somersault.pdx -nd
Changes in file somersault_modified.pdx
(compared to somersault.pdx)
Overview of diagnostic layers (for somersault_modified.pdx)
| Name | Variant Type | Num. of Services | Num. of DOPs | Num. of comparams
----+----------------------+--------------+------------------+--------------+-------------------
0 | somersault | BASE-VARIANT | 6 | 10 | 10
1 | somersault_lazy | ECU-VARIANT | 5 | 10 | 10
2 | somersault_assiduous | ECU-VARIANT | 8 | 10 | 10
3 | somersault_young | ECU-VARIANT | 6 | 10 | 10
Overview of diagnostic layers (for somersault.pdx)
| Name | Variant Type | Num. of Services | Num. of DOPs | Num. of comparams
----+----------------------+--------------+------------------+--------------+-------------------
0 | somersault | BASE-VARIANT | 7 | 10 | 10
1 | somersault_lazy | ECU-VARIANT | 5 | 10 | 10
2 | somersault_assiduous | ECU-VARIANT | 8 | 10 | 10
Changed ecu variants:
New ecu variants:
somersault_young
Deleted ecu variants:
Changed diagnostic services for ecu variant: somersault_lazy
Renamed services
| Name | Semantic | Hex-Request | Old service name
----+---------------+------------+---------------+--------------------
0 | session_start | SESSION | 0x1000 | start_session
Services with parameter changes
| Name | Semantic | Hex-Request | Changed parameters
----+----------------+---------------+-------------+-----------------------------------------------------------------------------------------------
0 | session_start | SESSION | 0x1000 | positive response parameter 'can_do_backward_flips',
1 | session_stop | SESSION | 0x1001 | request parameter 'id', positive response parameter 'can_do_backward_flips',
2 | tester_present | TESTERPRESENT | 0x3E00 | request parameter 'id', positive response parameter 'status',
3 | report_status | CURRENTDATA | 0x2200 | positive response parameter 'dizzyness_level', positive response parameter 'happiness_level',
Detailed changes of diagnostic service session_start
Properties of 2. positive response parameter can_do_backward_flips have changed
| Property | Old Value | New Value
----+---------------+-------------+------------------
0 | Linked DOP | uint8 | boolean
1 | DOP data type | A_UINT32 | A_UNICODE2STRING
Detailed changes of diagnostic service session_stop
Properties of 2. request parameter id have changed
| Property | Old Value | New Value
----+------------+-------------+-------------
0 | Bit Length | 16 | 8
Properties of 2. positive response parameter can_do_backward_flips have changed
| Property | Old Value | New Value
----+---------------+-------------+------------------
0 | Linked DOP | uint8 | boolean
1 | DOP data type | A_UINT32 | A_UNICODE2STRING
Detailed changes of diagnostic service tester_present
Properties of 2. request parameter id have changed
| Property | Old Value | New Value
----+------------+-------------+-------------
0 | Value | 0x01 | 0x00
Properties of 2. positive response parameter status have changed
| Property | Old Value | New Value
----+------------+-------------+-------------
0 | Bit Length | 16 | 8
1 | Value | 0x0043 | 0x00
Detailed changes of diagnostic service report_status
Properties of 2. positive response parameter dizzyness_level have changed
| Property | Old Value | New Value
----+----------------+-----------------+-----------------
0 | Parameter name | happiness_level | dizzyness_level
1 | Linked DOP | happiness_level | dizzyness_level
Properties of 3. positive response parameter happiness_level have changed
| Property | Old Value | New Value
----+----------------+-----------------+-----------------
0 | Parameter name | dizzyness_level | happiness_level
1 | Linked DOP | dizzyness_level | happiness_level
Changed diagnostic services for ecu variant: somersault_assiduous
New services
| Name | Semantic | Hex-Request
----+----------+------------+---------------
0 | flicflac | FUNCTION |
Deleted services
| Name | Semantic | Hex-Request
----+----------------------+------------+---------------
0 | set_operation_params | FUNCTION |
Renamed services
| Name | Semantic | Hex-Request | Old service name
----+---------------+------------+---------------+--------------------
0 | session_start | SESSION | 0x1000 | start_session
Services with parameter changes
| Name | Semantic | Hex-Request | Changed parameters
----+-------------------+---------------+-------------+---------------------------------------------------------------------------------------------------------------------------------------------
0 | session_start | SESSION | 0x1000 | positive response parameter 'can_do_backward_flips',
1 | session_stop | SESSION | 0x1001 | request parameter 'id', positive response parameter 'can_do_backward_flips',
2 | tester_present | TESTERPRESENT | 0x3E00 | request parameter 'id', positive response parameter 'status',
3 | do_backward_flips | FUNCTION | | request parameter 'backward_soberness_check', positive response parameter 'num_flips_done', positive response parameter 'grumpiness_level',
4 | report_status | CURRENTDATA | 0x2200 | positive response parameter 'dizzyness_level', positive response parameter 'happiness_level',
5 | headstand | UNKNOWN | | request parameter list,
Detailed changes of diagnostic service session_start
Properties of 2. positive response parameter can_do_backward_flips have changed
| Property | Old Value | New Value
----+---------------+-------------+------------------
0 | Linked DOP | uint8 | boolean
1 | DOP data type | A_UINT32 | A_UNICODE2STRING
Detailed changes of diagnostic service session_stop
Properties of 2. request parameter id have changed
| Property | Old Value | New Value
----+------------+-------------+-------------
0 | Bit Length | 16 | 8
Properties of 2. positive response parameter can_do_backward_flips have changed
| Property | Old Value | New Value
----+---------------+-------------+------------------
0 | Linked DOP | uint8 | boolean
1 | DOP data type | A_UINT32 | A_UNICODE2STRING
Detailed changes of diagnostic service tester_present
Properties of 2. request parameter id have changed
| Property | Old Value | New Value
----+------------+-------------+-------------
0 | Value | 0x01 | 0x00
Properties of 2. positive response parameter status have changed
| Property | Old Value | New Value
----+------------+-------------+-------------
0 | Bit Length | 16 | 8
1 | Value | 0x0043 | 0x00
Detailed changes of diagnostic service do_backward_flips
Properties of 2. request parameter backward_soberness_check have changed
| Property | Old Value | New Value
----+----------------+----------------+--------------------------
0 | Parameter name | backward_check | backward_soberness_check
Properties of 2. positive response parameter num_flips_done have changed
| Property | Old Value | New Value
----+---------------+-------------+-------------
0 | Byte position | 1 |
Properties of 3. positive response parameter grumpiness_level have changed
| Property | Old Value | New Value
----+----------------+-------------+-------------
0 | Byte position | 2 |
1 | Parameter type | CODED-CONST | VALUE
Detailed changes of diagnostic service report_status
Properties of 2. positive response parameter dizzyness_level have changed
| Property | Old Value | New Value
----+----------------+-----------------+-----------------
0 | Parameter name | happiness_level | dizzyness_level
1 | Linked DOP | happiness_level | dizzyness_level
Properties of 3. positive response parameter happiness_level have changed
| Property | Old Value | New Value
----+----------------+-----------------+-----------------
0 | Parameter name | dizzyness_level | happiness_level
1 | Linked DOP | dizzyness_level | happiness_level
Detailed changes of diagnostic service headstand
List of request parameters for service headstand is not identical.
| List | Values
----+----------+---------------------
0 | Old list | [sid, id, duration]
1 | New list | [sid, duration]The included unit tests can be run via
python -m unittest tests/test_*.pyThe static type checker can be run via
python3 -m mypy --ignore-missing-imports odxtoolsWe welcome any contributions. If you want to contribute to this project, please read the contributing guide.
Please read our Code of Conduct as it is our base for interaction.
Please visit https://mbition.io/en/home/index.html for information on the provider.
Notice: Before you use the program in productive use, please take all necessary precautions, e.g. testing and verifying the program with regard to your specific use. The program was tested solely for our own use cases, which might differ from yours.
This work includes research of the project SofDCar (19S21002), which is funded by the German Federal Ministry for Economic Affairs and Climate Action.
This project is licensed under the MIT LICENSE.
