Revamp yaml config for Raspbian

.github/workflows/package_raspbian.yml

@@ -0,0 +1,34 @@
+name: Package Raspbian
+
+on: workflow_dispatch
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          cp release/meshtasticd_linux_arm64 /usr/sbin/meshtasticd
+          cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ github.ref }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7
+          desc: Native Linux Meshtastic binary.

.trunk/configs/.yamllint.yaml

@@ -3,7 +3,7 @@ rules:
     required: only-when-needed
     extra-allowed: ["{|}"]
   empty-values:
-    forbid-in-block-mappings: true
+    forbid-in-block-mappings: false
     forbid-in-flow-mappings: true
   key-duplicates: {}
   octal-values:

bin/config-dist.yaml

@@ -1,26 +1,21 @@
-# Define your devices here.
-# Use Broadcom pin numbering
+# Define your devices here using Broadcom pin numbering
+# Uncomment the block that corresponds to your hardware
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
 
-#Waveshare SX126X XXXM
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
 
-#USE_SX1262: true
-#SX126X_DIO2_AS_RF_SWITCH: true
-#SX126X_CS: 21
-#SX126X_DIO1: 16
-#SX126X_BUSY: 20
-#SX126X_RESET: 18
-
-#Waveshare SX1302 LISTEN ONLY AT THIS TIME!
-
-#USE_SX1262: true
-#SX126X_CS: 7
-#SX126X_DIO1: 17
-#SX126X_RESET: 22
-
-#Adafruit RFM9x
-
-#USE_RF95: true
-#RF95_RESET: 25
-#RF95_NSS: 7
-#RF95_IRQ: 22
-#RF95_DIO1: 23
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23

src/main.cpp

@@ -694,8 +694,8 @@ void setup()
     if (settingsMap[use_sx1262]) {
         if (!rIf) {
             PiHal *RadioLibHAL = new PiHal(1);
-            rIf = new SX1262Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[sx126x_cs], settingsMap[sx126x_dio1],
-                                      settingsMap[sx126x_reset], settingsMap[sx126x_busy]);
+            rIf = new SX1262Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
+                                      settingsMap[busy]);
             if (!rIf->init()) {
                 LOG_ERROR("Failed to find SX1262 radio\n");
                 delete rIf;
@@ -707,8 +707,8 @@ void setup()
     } else if (settingsMap[use_rf95]) {
         if (!rIf) {
             PiHal *RadioLibHAL = new PiHal(1);
-            rIf = new RF95Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[rf95_nss], settingsMap[rf95_irq],
-                                    settingsMap[rf95_reset], settingsMap[rf95_dio1]);
+            rIf = new RF95Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
+                                    settingsMap[busy]);
             if (!rIf->init()) {
                 LOG_ERROR("Failed to find RF95 radio\n");
                 delete rIf;

src/mesh/SX126xInterface.cpp

@@ -79,7 +79,7 @@ template <typename T> bool SX126xInterface<T>::init()
     bool dio2AsRfSwitch = true;
 #elif defined(ARCH_RASPBERRY_PI)
     bool dio2AsRfSwitch = false;
-    if (settingsMap[sx126x_dio2_as_rf_switch]) {
+    if (settingsMap[dio2_as_rf_switch]) {
         LOG_DEBUG("Setting DIO2 as RF switch\n");
         dio2AsRfSwitch = true;
     }

src/platform/portduino/PortduinoGlue.cpp

@@ -123,17 +123,21 @@ void portduinoSetup()
     }
 
     try {
-        settingsMap[use_sx1262] = yamlConfig["USE_SX1262"].as<bool>(false);
-        settingsMap[sx126x_dio2_as_rf_switch] = yamlConfig["SX126X_DIO2_AS_RF_SWITCH"].as<bool>(false);
-        settingsMap[sx126x_cs] = yamlConfig["SX126X_CS"].as<int>(RADIOLIB_NC);
-        settingsMap[sx126x_dio1] = yamlConfig["SX126X_DIO1"].as<int>(RADIOLIB_NC);
-        settingsMap[sx126x_busy] = yamlConfig["SX126X_BUSY"].as<int>(RADIOLIB_NC);
-        settingsMap[sx126x_reset] = yamlConfig["SX126X_RESET"].as<int>(RADIOLIB_NC);
-        settingsMap[use_rf95] = yamlConfig["USE_RF95"].as<bool>(false);
-        settingsMap[rf95_nss] = yamlConfig["RF95_NSS"].as<int>(RADIOLIB_NC);
-        settingsMap[rf95_irq] = yamlConfig["RF95_IRQ"].as<int>(RADIOLIB_NC);
-        settingsMap[rf95_reset] = yamlConfig["RF95_RESET"].as<int>(RADIOLIB_NC);
-        settingsMap[rf95_dio1] = yamlConfig["RF95_DIO1"].as<int>(RADIOLIB_NC);
+        if (yamlConfig["Lora"]) {
+            settingsMap[use_sx1262] = false;
+            settingsMap[use_rf95] = false;
+
+            if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as<std::string>("") == "sx1262") {
+                settingsMap[use_sx1262] = true;
+            } else if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as<std::string>("") == "RF95") {
+                settingsMap[use_rf95] = true;
+            }
+            settingsMap[dio2_as_rf_switch] = yamlConfig["Lora"]["DIO2_AS_RF_SWITCH"].as<bool>(false);
+            settingsMap[cs] = yamlConfig["Lora"]["CS"].as<int>(RADIOLIB_NC);
+            settingsMap[irq] = yamlConfig["Lora"]["IRQ"].as<int>(RADIOLIB_NC);
+            settingsMap[busy] = yamlConfig["Lora"]["Busy"].as<int>(RADIOLIB_NC);
+            settingsMap[reset] = yamlConfig["Lora"]["Reset"].as<int>(RADIOLIB_NC);
+        }
 
     } catch (YAML::Exception e) {
         std::cout << "*** Exception " << e.what() << std::endl;

src/platform/portduino/PortduinoGlue.h

@@ -4,18 +4,6 @@
 
 extern std::map<int, int> settingsMap;
 
-enum {
-    use_sx1262,
-    sx126x_cs,
-    sx126x_dio1,
-    sx126x_busy,
-    sx126x_reset,
-    sx126x_dio2_as_rf_switch,
-    use_rf95,
-    rf95_nss,
-    rf95_irq,
-    rf95_reset,
-    rf95_dio1
-};
+enum { use_sx1262, cs, irq, busy, reset, dio2_as_rf_switch, use_rf95 };
 
 #endif