Add Heltec new boards. #4226
Merged
Add Heltec new boards. #4226
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
todd-herbert
reviewed
Jul 3, 2024
src/graphics/EInkDisplay2.h
Outdated
Comment on lines
8
to
11
| #if defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) || defined(HELTEC_VISION_MASTER_E290) | ||
| // Re-enable SPI after deep sleep: rtc_gpio_hold_dis() | ||
| #include "driver/rtc_io.h" | ||
| #endif |
There was a problem hiding this comment.
This whole block can come out actually. It's just a remnant from before #3539
There was a problem hiding this comment.
There's a few entries here that aren't used by the code base and can probably be removed (or updated to match variant.h)
DISPLAY_HEIGHTDISPLAY_WIDTHKEY_BUILTINVextLED
It'd be good to just have a general check of the info in all 4x new pins_arduino.h files. I think our existing Wireless Paper variant files have the same issue right now, so we could even skip it for now(?), and tidy the whole lot, together, in the near future.
There was a problem hiding this comment.
Sure, I will fix all of them on the next commit.
There was a problem hiding this comment.
Thanks, I know it's just a fussy detail, so I do appreciate the effort.
| -D EINK_DISPLAY_MODEL=GxEPD2_290_BS | ||
| -D EINK_WIDTH=296 | ||
| -D EINK_HEIGHT=128 | ||
| ; -D USE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk |
There was a problem hiding this comment.
The hacked together "async refresh" technique we've been using is implemented through the EInkDynamicDisplay class.
At some point, Vision Master 290 really needs to use this "async full-refresh" (and-or "fast-refresh"), otherwise it will be affected by #2356
The EInkDynamicDisplay class isn't actually equipped right now to handle displays without fast-refresh. If we can't come up with a fast-refresh operation for the DEPG0290BNS800F6 panel which is safe to use with Meshtastic though, I'll modify EInkDynamicDisplay to support full-refresh-only displays.
There was a problem hiding this comment.
Thanks, that makes sense to me.
What should I do before you modify the EInkDynamicDisplay?
There was a problem hiding this comment.
What should I do before you modify the EInkDynamicDisplay?
Is there any development work for "Partial Refresh"? If no, maybe we can just merge now, and worry about EInkDynamicDisplay after.
There was a problem hiding this comment.
E290 doesn't have a "Partial Refresh" function, so we don't have any development work on this.
thebentern
reviewed
Jul 4, 2024
| lib_deps = | ||
| ${esp32s3_base.lib_deps} | ||
| lewisxhe/PCF8563_Library@^1.0.1 | ||
| https://github.com/Bei-Ji-Quan/st7789 |
There was a problem hiding this comment.
This repo lib_dep and the other instances of it should be tied to a specific commit hash
|
@thebentern no objections from me about merging this as a starting point, if that's the best way forward. |
todd-herbert
added a commit
to todd-herbert/meshtastic-firmware
that referenced
this pull request
Jul 6, 2024
Matches requests made at meshtastic#4226 (comment))
thebentern
pushed a commit
that referenced
this pull request
Jul 6, 2024
* Quick tidy of pins_arduino.h Matches requests made at #4226 (comment)) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12`
thebentern
added a commit
that referenced
this pull request
Jul 8, 2024
* Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <[email protected]> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <[email protected]> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <[email protected]> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <[email protected]> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes #4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <[email protected]> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <[email protected]> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <[email protected]> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: todd-herbert <[email protected]> Co-authored-by: Ben Meadors <[email protected]> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <[email protected]> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <[email protected]> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <[email protected]> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <[email protected]> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <[email protected]> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes #4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes #4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <[email protected]> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes #4135 * powermon WIP (for #4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per #4136 * powermon gps support #4136 * Add CPU deep and light sleep powermon states #4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at #4226 (comment)) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <[email protected]> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h --------- Co-authored-by: Mike <[email protected]> Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Mike G <[email protected]> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <[email protected]> Co-authored-by: GUVWAF <[email protected]> Co-authored-by: Warren Guy <[email protected]> Co-authored-by: todd-herbert <[email protected]> Co-authored-by: geeksville <[email protected]> Co-authored-by: Jonathan Bennett <[email protected]> Co-authored-by: Alexander <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: quimnut <[email protected]> Co-authored-by: Manuel <[email protected]> Co-authored-by: Agent Blu, 006 <[email protected]> Co-authored-by: Mark Trevor Birss <[email protected]>
|
I'm able to build the 213 fine, but the 290 shows errors |
Ah that'll be because the new driver for the 290 hasn't been merged yet. If you change tohttps://github.com/HelTecAutomation/GxEPD2, I imagine it'll work right now though.
|
|
@todd-herbert Sorry for the delay, I'm working on this. |
|
Don't worry, no rush! |
|
I have fixed the above issues, thanks in advance for reviewing again. |
thebentern
approved these changes
Jul 9, 2024
todd-herbert
approved these changes
Jul 9, 2024
|
I'm still facing compiler errors for the E290: https://github.com/meshtastic/firmware/actions/runs/9869510579/job/27253395251?pr=3259 |
|
@Heltec-Aaron-Lee Did you install the trunk vscode extension and try: |
|
@mverch67 Need waiting for the meshtastic/GxEPD2#8 be merged. If you can't wait to test it for now, you can add and modify the files mentioned on meshtastic/GxEPD2#8 in your local, it's in the following depends path: |
|
This pull request has been mentioned on Meshtastic. There might be relevant details there: https://meshtastic.discourse.group/t/new-meshtastic-compatible-products/13689/2 |
thebentern
added a commit
that referenced
this pull request
Jul 14, 2024
* Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <[email protected]> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <[email protected]> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <[email protected]> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <[email protected]> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes #4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <[email protected]> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <[email protected]> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <[email protected]> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: todd-herbert <[email protected]> Co-authored-by: Ben Meadors <[email protected]> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <[email protected]> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <[email protected]> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <[email protected]> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <[email protected]> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <[email protected]> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes #4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes #4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <[email protected]> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes #4135 * powermon WIP (for #4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per #4136 * powermon gps support #4136 * Add CPU deep and light sleep powermon states #4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at #4226 (comment)) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <[email protected]> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h * Cleanup NRF s140 Softdevice variants (#4252) Note: This idea is originally from @caveman99 and should be credited as such. Submitting as a separate PR so the work in #4148 can be a bit cleaner and Seeed boards can build while that work is ongoing. The nrf52 boards that depend on the v7 softdevice all use the same code and linker files. Rather than duplicate the code, keep it all together with the platform. * Remove tracker variant specific soft device headers (#4255) * [create-pull-request] automated change (#4247) Co-authored-by: thebentern <[email protected]> * Add wio-sdk-wm1110 to build. (#4258) The wio-sdk-wm1110 is distinct from the wio-tracker-wm1110, with different platformio build options and pin config. This change adds the wio-sdk-wm1110 to the CI matrix so firmware is built as part of release. * fix python warning in uf2conf (#4235) the old regex worked but was technically incorrect. fixes: Generating NRF52 uf2 file /home/kevinh/development/meshtastic/firmware/bin/uf2conv.py:195: SyntaxWarning: invalid escape sequence '\s' words = re.split('\s+', line) Converting to uf2, output size: 1458688, start address: 0x26000 * Collect hex files and specifically wm1110 sdk * Skip dfu file for sdk (for now) * Helps if you remove the original clause * Add Heltec new boards. (#4226) * Add Heltec new boards * Update variant.h disable RTC by default * Add Heltec New boards * Add Heltec new boards * Update Heltec Mesh Node definition. * Update Heltec Vision Mater E290 * [create-pull-request] automated change (#4259) Co-authored-by: thebentern <[email protected]> * Trunk fmt * Fix macros * Move e290 to board level extra while CI is broken * Tell trunk to ignore bin folder * Fix missing * Update trunk.yaml, fix whitespace * Update trunk.yaml * Update build_raspbian_armv7l.yml --fix-missing * [create-pull-request] automated change (#4263) Co-authored-by: thebentern <[email protected]> * GPS Power State tidy-up (#4161) * Refactor GPSPowerState enum Identifies a case where the GPS hardware is awake, but an update is not yet desired * Change terminology * Clear old lock-time prediction on triple press * Use exponential smoothing to predict lock time * Rename averageLockTime to predictedLockTime * Attempt: Send PMREQ with duration 0 on MCU deep-sleep * Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep * Revert "Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit 8b697cd. * Revert "Attempt: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit 9d29ec7. * Remove unused notifyGPSSleep Observable Handled with notifyDeepSleep, and enable() / disable() * WIP: simplify GPS power management An initial attempt only. * Honor #3e9e0fd * No-op when moving between GPS_IDLE and GPS_ACTIVE * Ensure U-blox GPS is awake to receive indefinite sleep command * Longer pause when waking U-blox to send sleep command * Actually implement soft and hard sleep.. * Dynamically estimate the threshold for GPS_HARDSLEEP * Fallback to GPS_HARDSLEEP, if GPS_SOFTSLEEP unsupported * Move "excessive search time" behavior to scheduler class * Minor logging adjustments * Promote log to warning * Gratuitous buffer clearing on boot * Fix inverted standby pin logic Specifically the standby pin for L76B, L76K and clones Discovered during T-Echo testing: totally broken function, probe method failing. * Remove redundant pin init Now handled by setPowerState * Replace max() with if statements Avoid those platform specific implementations.. * Trunk formatting New round of settings.json changes keep catching me out, have to remember to re-enable my "clang-format" for windows workaround. * Remove some asserts from setPowerState Original aim was to prevent sending a 0 second PMREQ to U-blox hardware as part of a timed sleep (GPS_HARDSLEEP, GPS_SOFTSLEEP). I'm not sure this is super important, and it feels tidier to just allow the 0 second sleeptime here, rather than fudge the sleeptime further up. * Fix an error determining whether GPS_SOFTSLEEP is supported * Clarify a log entry * Set PIN_STANDBY for MCU deep-sleep Required to reach TTGO's advertised 0.25mA sleep current for T-Echo. Without this change: ~6mA. * Optimize the shutdown current of RAK10701 to around 25uA (#4260) Co-authored-by: Jonathan Bennett <[email protected]> * INA3221 sensor: use for bus voltage & environment metrics (#4215) * use INA3221 for bus voltage; fixes for telemetry variants - add to sensors available for environment telemetry (to report voltage/current) - add vars to define channels to use for battery voltage (for getBusVoltage) and environment metrics (default to CH1 for both) - write to the correct fields on the measurement struct depending on the measurement variant, and DRY up the sensor measurement collection code a bit - this might be suitable for a common implementation for the INA* sensors in a future PR... * formatting * derp --------- Co-authored-by: Ben Meadors <[email protected]> * WM1110 SDK kit enter serial DFU and add deployment packages (#4266) * Switch default upload protocol to nrfutil so that pio generates zip deploy packages * Enter serial DFU on SDK board * Remove guard for DFU zip from SDK build * NRF_USE_SERIAL_DFU macro instead * Show specific frame when updating screen (#4264) * Updated setFrames in Screen.cpp Added code to attempt to revert back to the same frame that user was on prior to setFrame reload. * Space added Screen.cpp * Update Screen.cpp Make screen to revert to Frame 0 if the originally displayed frame is no longer there. * Update Screen.cpp Inserted boolean holdPosition into setFrames to indicate the requirement to stay on the same frame ( if =true) or else it will switch to new frame . Only Screen::handleStatusUpdate calls with setFrame(true). ( For Node Updates) All other types of updates call as before setFrame(), so it will change focus as needed. * Hold position, even if number of frames increases * Hold position, if handling an outgoing text message * Update Screen.cpp * Reverted chnages related to devicestate.has_rx_text_message * Reset to master * CannedMessages only handles routing packets when waiting for ACK Previously, this was calling Screen::setFrames at unexpected times * Gather position info about screen frames while regenerating * Make admin module observable Notify only when relevant. Currently: only to handle remove_nodenum. * Optionally specify which frame to focus when setFrames runs * UIFrameEvent uses enum instead of multiple booleans * Allow modules to request their own frame to be focussed This is done internally by calling MeshModule::requestFocus() Easier this way, insteady of passing the info in the UIFrameEvent: * Modules don't always know whether they should be focussed until after the UIFrameEvent has been raised, in dramFrame * Don't have to pass reference to module instance as parameter though several methods * E-Ink screensaver uses FOCUS_PRESERVE Previously, it had its own basic implementation of this. * Spelling: regional variant * trunk * Fix HAS_SCREEN guarding * More HAS_SCREEN guarding --------- Co-authored-by: BIST <[email protected]> Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: slash-bit <[email protected]> * Move up telemetry defaults to every 30 minutes (#4274) * Don't send node info interrogation when ch. util is >25% (#4273) * Moar LR1110 Targets * update SD_FLASH_SIZE to 0x27000 (#4232) The 7.3.0 softdevice needs the extra 1000 :) * Fix spacing. --------- Co-authored-by: Mike <[email protected]> Co-authored-by: Ben Meadors <[email protected]> Co-authored-by: Mike G <[email protected]> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <[email protected]> Co-authored-by: GUVWAF <[email protected]> Co-authored-by: Warren Guy <[email protected]> Co-authored-by: todd-herbert <[email protected]> Co-authored-by: geeksville <[email protected]> Co-authored-by: Jonathan Bennett <[email protected]> Co-authored-by: Alexander <[email protected]> Co-authored-by: Thomas Göttgens <[email protected]> Co-authored-by: quimnut <[email protected]> Co-authored-by: Manuel <[email protected]> Co-authored-by: Agent Blu, 006 <[email protected]> Co-authored-by: Mark Trevor Birss <[email protected]> Co-authored-by: Aaron.Lee <[email protected]> Co-authored-by: Daniel.Cao <[email protected]> Co-authored-by: BIST <[email protected]> Co-authored-by: slash-bit <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Added 4 Heltec New boards.
Vision Master T190 -- ESP32-S3 CPU, and a 1.90-inch TFT display
Vision Master E213 -- ESP32-S3 CPU, and a 2.13-inch E-Ink display
Vision Master E290 -- ESP32-S3 CPU, and a 2.9-inch E-Ink display
Mesh Node T114 -- nRF52840 CPU, and a 1.14-inch TFT display, Ultimate low-power design, specifically adapted for the Meshtatic project