merge: with linus tree on 25-August #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just small ALPS and Elan touchpads, and other driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add special check for fw_version 0x470f01 touchpad Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning Input: alps - only Dell laptops have separate button bits for v2 dualpoint sticks Input: axp20x-pek - add module alias Input: turbografx - fix potential out of bound access
It was possible for a synchronous update of the RX index in the error case to get ahead of the asynchronous RX index update in the normal case. Change the RX processing to preserve an RX completion order. There were two error cases. First, if a buffer is not present to receive data, there would be no queue entry to preserve the RX completion order. Instead of dropping the RX frame, leave the RX frame in the ring. Schedule RX processing when RX entries are enqueued, in case there are RX frames waiting in the ring to be received. Second, if a buffer is too small to receive data, drop the frame in the ring, mark the RX entry as done, and indicate the error in the RX entry length. Check for a negative length in the receive callback in ntb_netdev, and count occurrences as rx_length_errors. Signed-off-by: Allen Hubbe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
Currently the debugfs does not have files for all NTB transport queue pairs. When there are multiple NTBs present in a system, the QP names of the last transport clobber the names of previously added transport QPs. Only the last added QPs can be observed via debugfs. Create a directory per NTB transport to associate the QPs with that transport. Name the directory the same as the PCI device. Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]>
ntb_netdev is allowing the link to come up even when -ENOMEM is returned from ntb_transport_rx_enqueue. Fix to cover all possible errors. Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]>
When the remote side is not up, we do not have all the context for the transport, and that causes NULL ptr access. Have the debugfs reads check to see if transport is up before we make access. Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]>
Schedule to receive on QP link up, to make sure that the doorbell is properly cleared for interrupts. Signed-off-by: Allen Hubbe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
A plain 32 bit integer will overflow for values over 4GiB. Change the plain integer size to the appropriate size type in ntb_set_mw. Change the type of the size parameter and two local variables used for size. Even if there is no overflow, a size of zero is invalid here. Reported-by: Juyoung Jung <[email protected]> Signed-off-by: Allen Hubbe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
Remove early dereference of a pointer that is checked later in the code. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Allen Hubbe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
Avoid any chance of format string expansion when calling dev_set_name. Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Jon Mason <[email protected]>
Commit 11c32d7 "video: move Versatile CLCD helpers" missed the fact that the Integrator/CP is also using the helper, and as a result the platform got only stubs and no graphics. Add this as a default selection to Kconfig so we have graphics again. Fixes: 11c32d7 (video: move Versatile CLCD helpers) Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
Fix node refcount leak in omapdss_of_get_next_port(). Signed-off-by: Jyri Sarha <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
Fix omap_dss_find_output_by_port_node() port parameter refcount decrementation. The only user of dss_of_port_get_parent_device() function is omap_dss_find_output_by_port_node() and it assumes the refcount of the port parameter is not decremented by the call. Signed-off-by: Jyri Sarha <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
The clocks need to be prepared before being enabled. Without it a warning appears in the drivers probe path : WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:707 clk_core_enable+0x84/0xa0() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0-rc3-cm-x300+ #804 Hardware name: CM-X300 module [<c000ed50>] (unwind_backtrace) from [<c000ce08>] (show_stack+0x10/0x14) [<c000ce08>] (show_stack) from [<c0017eb4>] (warn_slowpath_common+0x7c/0xb4) [<c0017eb4>] (warn_slowpath_common) from [<c0017f88>] (warn_slowpath_null+0x1c/0x24) [<c0017f88>] (warn_slowpath_null) from [<c02d30dc>] (clk_core_enable+0x84/0xa0) [<c02d30dc>] (clk_core_enable) from [<c02d3118>] (clk_enable+0x20/0x34) [<c02d3118>] (clk_enable) from [<c0200dfc>] (pxa3xx_gcu_probe+0x148/0x338) [<c0200dfc>] (pxa3xx_gcu_probe) from [<c022eccc>] (platform_drv_probe+0x30/0x94) Signed-off-by: Robert Jarzmik <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
Commit 77a3c6f ("[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers") uses the __WARN() macro which isn't defined when CONFIG_BUG isn't set. This introduces a compilation breakage. Fix it by using WARN_ON() instead. The commit was also broken in that it merged v1 of the patch while a new v2 version had been submitted, reviewed and acked. Fix it by incorporating the changes from v1 to v2. Fixes: 77a3c6f ("[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers") Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Larry Finger <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
This happens when networking namespaces are enabled. Suggested-by: Patrick McHardy <[email protected]> Signed-off-by: Phil Sutter <[email protected]> Acked-by: Patrick McHardy <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Upon receipt of SYNACK from the server, ipt_SYNPROXY first sends back an ACK to finish the server handshake, then calls nf_ct_seqadj_init() to initiate sequence number adjustment of forwarded packets to the client and finally sends a window update to the client to unblock it's TX queue. Since synproxy_send_client_ack() does not set synproxy_send_tcp()'s nfct parameter, no sequence number adjustment happens and the client receives the window update with incorrect sequence number. Depending on client TCP implementation, this leads to a significant delay (until a window probe is being sent). Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
In case videomode_from_timings() fails in function of_get_videomode(), the allocated display timing data is not freed in the exit path. Make sure that display_timings_release() is called in any case. Detected by Coverity CID 1309681. Signed-off-by: Christian Engelmayer <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
A sun7i-a20-olinuxino-micro fails to boot when kernel parameter vt.global_cursor_default=0. The value is copied to vc->vc_deccm causing the initialization of ops->cur_blink_jiffies to be skipped. Unconditionally initialize it. Reported-and-tested-by: Jonathan Liu <[email protected]> Signed-off-by: Scot Doyle <[email protected]> Acked-by: Pavel Machek <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
It turns out that a PV domU also requires the "Xen PV" APIC driver. Otherwise, the flat driver is used and we get stuck in busy loops that never exit, such as in this stack trace: (gdb) target remote localhost:9999 Remote debugging using localhost:9999 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56 56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY) (gdb) bt #0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56 #1 __default_send_IPI_shortcut (shortcut=<optimized out>, dest=<optimized out>, vector=<optimized out>) at ./arch/x86/include/asm/ipi.h:75 #2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54 #3 0xffffffff81011336 in arch_irq_work_raise () at arch/x86/kernel/irq_work.c:47 #4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at kernel/irq_work.c:100 #5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633 #6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>, fmt=<optimized out>, args=<optimized out>) at kernel/printk/printk.c:1778 #7 0xffffffff816010c8 in printk (fmt=<optimized out>) at kernel/printk/printk.c:1868 #8 0xffffffffc00013ea in ?? () #9 0x0000000000000000 in ?? () Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755 Signed-off-by: Jason A. Donenfeld <[email protected]> Cc: <[email protected]> Signed-off-by: David Vrabel <[email protected]>
Since 906c555 ("timekeeping: Copy the shadow-timekeeper over the real timekeeper last") it has become possible on arm64 to: - Obtain a CLOCK_MONOTONIC_COARSE or CLOCK_REALTIME_COARSE timestamp via syscall. - Subsequently obtain a timestamp for the same clock ID via VDSO which predates the first timestamp (by one jiffy). This is because arm64's update_vsyscall is deriving the coarse time using the __current_kernel_time interface, when it should really be using the timekeeper object provided to it by the timekeeping core. It happened to work before only because __current_kernel_time would access the same timekeeper object which had been passed to update_vsyscall. This is no longer the case. Signed-off-by: Nathan Lynch <[email protected]> Acked-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
The ESP code has been updated to generate a completely linear AD SG list. This unfortunately broke authencesn which expects the AD to be divided into at least three parts. This patch fixes it to cope with the new format. Later we will fix it properly to accept arbitrary input and not rely on the input being linear as part of the AEAD conversion. Fixes: 7021b2e ("esp4: Switch to new AEAD interface") Signed-off-by: Herbert Xu <[email protected]>
The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <[email protected]> Tested-by: Iago López Galeiras <[email protected]> Cc: <[email protected]> # 3.17+ Acked-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
…/git/viro/vfs Pull RCU pathwalk fix from Al Viro: "Another racy use of nd->path.dentry in RCU mode" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: may_follow_link() should use nd->inode
Pull NTB bugfixes from Jon Mason: "NTB bug fixes to address transport receive issues, stats, link negotiation issues, and string formatting" * tag 'ntb-4.2-rc7' of git://github.com/jonmason/ntb: ntb: avoid format string in dev_set_name NTB: Fix dereference before check NTB: Fix zero size or integer overflow in ntb_set_mw NTB: Schedule to receive on QP link up NTB: Fix oops in debugfs when transport is half-up NTB: ntb_netdev not covering all receive errors NTB: Fix transport stats for multiple devices NTB: Fix ntb_transport out-of-order RX update
…l/git/lee/mfd Pull MFD fixes from Lee Jones: - fix dependency issues on ChromeOS platforms - fix runtime PM issues on Arizona - fix IRQ/suspend race on Arizona * tag 'mfd-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: Remove MFD_CROS_EC_SPI depends on OF platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM mfd: arizona: Fix initialisation of the PM runtime mfd: arizona: Fix race between runtime suspend and IRQs
Using spinlocks protection during one-time driver initialization is not necessary. Moreover it resulted in invalid GFP_KERNEL allocation under the lock. This commit removes redundant spinlocks from buffer manager part of mvpp2 initialization. Signed-off-by: Marcin Wojtas <[email protected]> Reported-by: Alexandre Fournier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
mvpp2 driver allows usage of per-CPU TX processing. Once the packets are prepared independetly on each CPU, the hardware enqueues the descriptors in common TX queue. After they are sent, the buffers and associated sk_buffs should be released on the corresponding CPU. This is why a special index is maintained in order to point to the right data to be released after transmission takes place. Each per-CPU TX queue comprise an array of sent sk_buffs, freed in mvpp2_txq_bufs_free function. However, the index was used there also for obtaining a descriptor (and therefore a buffer to be DMA-unmapped) from common TX queue, which was wrong, because it was not referring to the current CPU. This commit enables proper unmapping of sent data buffers by indexing them in per-CPU queues using a dedicated array for keeping their physical addresses. Signed-off-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The PP2 controller is capable of per-CPU TX processing, which means there are per-CPU banked register sets and queues. Current version of the driver supports TX packet coalescing - once on given CPU sent packets amount reaches a threshold value, an IRQ occurs. However, there is a single interrupt line responsible for CPU0/1 TX and RX events (the latter is not per-CPU, the hardware does not support RSS). When the top-half executes the interrupt cause is not known. This is why in NAPI poll function, along with RX processing, IRQ cause register on both CPU's is accessed in order to determine on which of them the TX coalescing threshold might have been reached. Thus the egress processing and releasing the buffers is able to take place on the corresponding CPU. Hitherto approach lead to an illegal usage of on_each_cpu function in softirq context. The problem is solved by resigning from TX coalescing interrupts and separating egress finalization from NAPI processing. For that purpose a method of using hrtimer is introduced. In main transmit function (mvpp2_tx) buffers are released once a software coalescing threshold is reached. In case not all the data is processed a timer is set on this CPU - in its interrupt context a tasklet is scheduled in which all queues are processed. At once only one timer per-CPU can be running, which is controlled by a dedicated flag. This commit removes TX processing from NAPI polling function, disables hardware coalescing and enables hrtimer with tasklet, using new per-CPU port structure (mvpp2_port_pcpu). Signed-off-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Marcin Wojtas says: ==================== Fixes for the network driver of Marvell Armada 375 SoC This is a set of three patches that fix long-lasting problems implemented in the initial support for the Armada 375 network controller. Due to an inappropriate concept of handling the per-CPU sent packets' processing on TX path the driver numerous problems occured, such as RCU stalls. Those have been fixed, of which details you can find in the commit logs. The patches were intensively tested on top of v4.2-rc5. I'm looking forward to any comments or remarks. ==================== Signed-off-by: David S. Miller <[email protected]>
…t/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a small collecton of sound fix patches. The most significant one is the disablement of newly introduced topology API. Its ABI couldn't be stabilized enough, so we decided to delay for 4.3 in the end. Other than that, all oneliner fixes: a USB-audio runtime PM fix and a couple of HD-audio quirks" * tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211) ALSA: usb-audio: Fix runtime PM unbalance ASoC: topology: Disable use from userspace ASoC: topology: Add Kconfig option for topology ALSA: hda - Fix the white noise on Dell laptop
…ux/kernel/git/xen/tip Pull xen build fix from David Vrabel: "Fix i386 build with an (uncommon) configuration" * tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
Pull networking fixes from David Miller:
1) Out of bounds array access in 802.11 minstrel code, from Adrien
Schildknecht.
2) Don't use skb_get() in IGMP/MLD code paths, as this makes
pskb_may_pull() BUG. From Linus Luessing.
3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.
4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.
5) Fix ppp device deregistration wrt. netns deletion, from Guillaume
Nault.
6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
Lau.
7) Fix memory leak in batman-adv code, from Sven Eckelmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
batman-adv: Fix memory leak on tt add with invalid vlan
net: phy: fix semicolon.cocci warnings
net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
be2net: avoid vxlan offloading on multichannel configs
ipv6: Fix a potential deadlock when creating pcpu rt
ipv6: Add rt6_make_pcpu_route()
ipv6: Remove un-used argument from ip6_dst_alloc()
net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
net: ethernet: micrel: fix an error code
ppp: fix device unregistration upon netns deletion
net: phy: fix PHY_RUNNING in phy_state_machine
Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
inet: fix potential deadlock in reqsk_queue_unlink()
gianfar: Restore link state settings after MAC reset
ipv4: off-by-one in continuation handling in /proc/net/route
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
mac80211: fix invalid read in minstrel_sort_best_tp_rates()
Commit b253149 ("sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance") restores mwait_idle(), but the trace_cpu_idle related calls are missing. This causes powertop on my old desktop powered by Intel Core2 E6550 to report zero wakeups and zero events. Add them back to restore the proper behaviour. Fixes: b253149 ("sched/idle/x86: Restore mwait_idle() to ...") Signed-off-by: Jisheng Zhang <[email protected]> Cc: <[email protected]> Cc: [email protected] # 4.1 Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
Meelis and Helge reported that 3a9ad0b ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b, we always used 32-bit PCI addresses. After 3a9ad0b, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/[email protected] Reported-by: Meelis Roos <[email protected]> Reported-by: Helge Deller <[email protected]> Tested-by: Helge Deller <[email protected]> Based-on-idea-by: Yinghai Lu <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Yinghai Lu <[email protected]> CC: [email protected] # v3.19+
* acpi-video: ACPI / video: Fix circular lock dependency issue in the video-detect code * cpufreq-fixes: cpufreq: exynos: Fix for memory leak in case SoC name does not match
…nel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
…rg/drm-intel into drm-fixes Revert of a VBT parsing commit that should've been queued for drm-next, not v4.2. The revert unbreaks Braswell among other things. Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency support. The code was optimistically added based on incorrect documentation; the platform does not support them. These are cc: stable. Finally a gpu state fix from Chris, also cc: stable. * tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel: drm/i915: Avoid TP3 on CHV drm/i915: remove HBR2 from chv supported list Revert "drm/i915: Add eDP intermediate frequencies for CHV" Revert "drm/i915: Allow parsing of variable size child device entries from VBT" drm/i915: Flag the execlists context object as dirty after every use
We apparantly get a hotplug irq before we've initialised modesetting, [drm] Loading R100 Microcode BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91 *pde = 00000000 Oops: 0002 [#1] Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111 Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003 Workqueue: events radeon_hotplug_work_func [radeon] task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000 EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0 EIP is at __mutex_lock_slowpath+0x23/0x91 EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0 Stack: f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940 Call Trace: [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7 [<c125f162>] ? mutex_lock+0x9/0xa [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon] [<c1034741>] ? process_one_work+0xfc/0x194 [<c1034b58>] ? worker_thread+0x18d/0x218 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5 [<c103742a>] ? kthread+0x7b/0x80 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30 [<c10373af>] ? init_completion+0x18/0x18 Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63 Reported-and-Tested-by: Meelis Roos <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
Pull drm fixes from Dave Airlie: "A bunch of i915 fixes, one revert a VBT fix that was a bit premature, and some braswell feature removal that the hw actually didn't support. One radeon race fix at boot, and one hlcdc build fix, one fix from Russell that fixes build as well with new audio features. This is hopefully all I have until -next" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix hotplug race at startup drm/edid: add function to help find SADs drm/i915: Avoid TP3 on CHV drm/i915: remove HBR2 from chv supported list Revert "drm/i915: Add eDP intermediate frequencies for CHV" Revert "drm/i915: Allow parsing of variable size child device entries from VBT" drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only drm/i915: Flag the execlists context object as dirty after every use
…/git/dtor/input Pull input layer fix from Dmitry Torokhov: "A small fixup to gpio_keys_polled driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_keys_polled - request GPIO pin as input.
…/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a regression fix at the videobuf2 core driver - fix error handling at mantis probing code - revert the IR encode patches, as the API is not mature enough. So, better to postpone the changes to a latter Kernel - fix Kconfig breakages on some randconfig scenarios. * tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] mantis: Fix error handling in mantis_dma_init() Revert "[media] rc: rc-ir-raw: Add scancode encoder callback" Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper" Revert "[media] rc: ir-rc5-decoder: Add encode capability" Revert "[media] rc: ir-rc6-decoder: Add encode capability" Revert "[media] rc: rc-core: Add support for encode_wakeup drivers" Revert "[media] rc: rc-loopback: Add loopback of filter scancodes" Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback" [media] vb2: Fix compilation breakage when !CONFIG_BUG [media] vb2: Only requeue buffers immediately once streaming is started [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled [media] media/dvb: fix ts2020.c Kconfig and build
…rnel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for ASPM-related NULL pointer dereference crashes on
Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
PA-RISC. These are both caused by things we merged in the v4.2 merge
window. Details:
Resource management
- Don't use 64-bit bus addresses on PA-RISC
Miscellaneous
- Tolerate hierarchies with no Root Port"
* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't use 64-bit bus addresses on PA-RISC
PCI: Tolerate hierarchies with no Root Port
Commit c48a11c ("netvm: propagate page->pfmemalloc to skb") added checks for page->pfmemalloc to __skb_fill_page_desc(): if (page->pfmemalloc && !page->mapping) skb->pfmemalloc = true; It assumes page->mapping == NULL implies that page->pfmemalloc can be trusted. However, __delete_from_page_cache() can set set page->mapping to NULL and leave page->index value alone. Due to being in union, a non-zero page->index will be interpreted as true page->pfmemalloc. So the assumption is invalid if the networking code can see such a page. And it seems it can. We have encountered this with a NFS over loopback setup when such a page is attached to a new skbuf. There is no copying going on in this case so the page confuses __skb_fill_page_desc which interprets the index as pfmemalloc flag and the network stack drops packets that have been allocated using the reserves unless they are to be queued on sockets handling the swapping which is the case here and that leads to hangs when the nfs client waits for a response from the server which has been dropped and thus never arrive. The struct page is already heavily packed so rather than finding another hole to put it in, let's do a trick instead. We can reuse the index again but define it to an impossible value (-1UL). This is the page index so it should never see the value that large. Replace all direct users of page->pfmemalloc by page_is_pfmemalloc which will hide this nastiness from unspoiled eyes. The information will get lost if somebody wants to use page->index obviously but that was the case before and the original code expected that the information should be persisted somewhere else if that is really needed (e.g. what SLAB and SLUB do). [[email protected]: fix blooper in slub] Fixes: c48a11c ("netvm: propagate page->pfmemalloc to skb") Signed-off-by: Michal Hocko <[email protected]> Debugged-by: Vlastimil Babka <[email protected]> Debugged-by: Jiri Bohac <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: David Miller <[email protected]> Acked-by: Mel Gorman <[email protected]> Cc: <[email protected]> [3.6+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
While the idea behind get_maintainer seems highly useful it's unfortunately way to trigger happy to grab people that once had a few commits to files. For someone like me who does a lot of tree-wide API work that leads to an incredible amount of Cc spam. Signed-off-by: Christoph Hellwig <[email protected]> Cc: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
On a math-emu bootup the following crash occurs: Initializing CPU#0 ------------[ cut here ]------------ kernel BUG at arch/x86/kernel/traps.c:779! invalid opcode: 0000 [#1] SMP [...] EIP is at do_device_not_available+0xe/0x70 [...] Call Trace: [<c18238e6>] error_code+0x5a/0x60 [<c1002bd0>] ? math_error+0x140/0x140 [<c100bbd9>] ? fpu__init_cpu+0x59/0xa0 [<c1012322>] cpu_init+0x202/0x330 [<c104509f>] ? __native_set_fixmap+0x1f/0x30 [<c1b56ab0>] trap_init+0x305/0x346 [<c1b548af>] start_kernel+0x1a5/0x35d [<c1b542b4>] i386_start_kernel+0x82/0x86 The reason is that in the following commit: b1276c4 ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()") I failed to consider math-emu's limitation that it cannot execute the FNINIT instruction in kernel mode. The long term fix might be to allow math-emu to execute (certain) kernel mode FPU instructions, but for now apply the safe (albeit somewhat ugly) fix: initialize the emulation state explicitly without trapping out to the FPU emulator. Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Quentin Casasnovas <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
During later stages of math-emu bootup the following crash triggers: math_emulate: 0060:c100d0a8 Kernel panic - not syncing: Math emulation needed in kernel CPU: 0 PID: 1511 Comm: login Not tainted 4.2.0-rc7+ #1012 [...] Call Trace: [<c181d50d>] dump_stack+0x41/0x52 [<c181c918>] panic+0x77/0x189 [<c1003530>] ? math_error+0x140/0x140 [<c164c2d7>] math_emulate+0xba7/0xbd0 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c1109c3c>] ? __alloc_pages_nodemask+0x12c/0x870 [<c136ac20>] ? proc_clear_tty+0x40/0x70 [<c136ac6e>] ? session_clear_tty+0x1e/0x30 [<c1003530>] ? math_error+0x140/0x140 [<c1003575>] do_device_not_available+0x45/0x70 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c18258e6>] error_code+0x5a/0x60 [<c1003530>] ? math_error+0x140/0x140 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c100c205>] arch_dup_task_struct+0x25/0x30 [<c1048cea>] copy_process.part.51+0xea/0x1480 [<c115a8e5>] ? dput+0x175/0x200 [<c136af70>] ? no_tty+0x30/0x30 [<c1157242>] ? do_vfs_ioctl+0x322/0x540 [<c104a21a>] _do_fork+0xca/0x340 [<c1057b06>] ? SyS_rt_sigaction+0x66/0x90 [<c104a557>] SyS_clone+0x27/0x30 [<c1824a80>] sysenter_do_call+0x12/0x12 The reason is the incorrect assumption in fpu_copy(), that FNSAVE can be executed from math-emu kernels as well. Don't try to copy the registers, the soft state will be copied by fork anyway, so the child task inherits the parent task's soft math state. With this fix applied math-emu kernels boot up fine on modern hardware and the 'no387 nofxsr' boot options. Cc: Andy Lutomirski <[email protected]> Cc: Bobby Powers <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Quentin Casasnovas <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
…m/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two minimalistic fixes for 4.2 regressions:
- Eric fixed a thinko in the timer_list base switching code caused by
the overhaul of the timer wheel. It can cause a cpu to see the
wrong base for a timer while we move the timer around.
- Guenter fixed a regression for IMX if booted w/o device tree, where
the timer interrupt is not initialized and therefor the machine
fails to boot"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/imx: Fix boot with non-DT systems
timer: Write timer->flags atomically
…inux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A series of small fixlets for a regression visible on OMAP devices caused by the conversion of the OMAP interrupt chips to hierarchical interrupt domains. Mostly one liners on the driver side plus a small helper function in the core to avoid open coded mess in the drivers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Restore set_wake functionality irqchip/crossbar: Restore the mask on suspend behaviour ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism irqchip/crossbar: Restore the irq_set_type() mechanism genirq: Introduce irq_chip_set_type_parent() helper genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
…linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Show backtrace when handling a SIGSEGV on --stdio mode perf tools: Fix buildid processing perf tools: Make fork event processing more resilient perf tools: Avoid deadlock when map_groups are broken
…inux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various low level fixes: fix more fallout from the FPU rework and the asm entry code rework, plus an MSI rework fix, and an idle-tracing fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/math-emu: Fix crash in fork() x86/fpu/math-emu: Fix math-emu boot crash x86/idle: Restore trace_cpu_idle to mwait_idle() calls x86/irq: Build correct vector mapping for multiple MSI interrupts Revert "sched/x86_64: Don't save flags on context switch"
Pull ARM fixes from Russell King: "Another couple of small ARM fixes. A patch from Masahiro Yamada who noticed that "make -jN all zImage" would end up generating bad images where N > 1, and a patch from Nicolas to fix the Marvell CPU user access optimisation code when page faults are disabled" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8418/1: add boot image dependencies to not generate invalid images ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
Some use of those functions were providing unitialized values to those
functions. Notably, when reading 0 bytes from an empty file on a 9P
filesystem, the return code of read() was not 0.
Tested with this simple program:
#include <assert.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, const char **argv)
{
assert(argc == 2);
char buffer[256];
int fd = open(argv[1], O_RDONLY|O_NOCTTY);
assert(fd >= 0);
assert(read(fd, buffer, 0) == 0);
return 0;
}
Cc: [email protected] # v4.1
Signed-off-by: Vincent Bernat <[email protected]>
Signed-off-by: Al Viro <[email protected]>
…/git/viro/vfs
Pull 9p regression fix from Al Viro:
"Fix for breakage introduced when switching p9_client_{read,write}() to
struct iov_iter * (went into 4.1)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: ensure err is initialized to 0 in p9_client_read/write
…ream-linus Pull MIPS bug fixes from Ralf Baechle: "Two more fixes for 4.2. One fixes a build issue with the LLVM assembler - LLVM assembler macro names are case sensitive, GNU as macro names are insensitive; the other corrects a license string (GPL v2, not GPLv2) such that the module loader will recognice the license correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: FIRMWARE: bcm47xx_nvram: Fix module license. MIPS: Fix LLVM build issue.
…it/jejb/scsi Pull SCSI fixes from James Bottomley: "A couple of major (hang and deadlock) fixes with fortunately fairly rare triggering conditions. The PM oops is only really triggered by people using enclosure services (rare) and the fnic driver is mostly used in enterprise environments" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: Fix NULL pointer dereference in runtime PM fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
mfrw
added a commit
that referenced
this pull request
Aug 25, 2015
merge: with linus tree on 25-August
mfrw
pushed a commit
that referenced
this pull request
Aug 25, 2015
The ehci_init_driver is used to initialize hcd APIs for each ehci controller driver, it is designed to be called only one time and before driver register is called. The current design will cause ehci_init_driver is called multiple times at probe process, it will cause hc_driver's initialization affect current running hcd. We run out NULL pointer dereference problem when one hcd is started by module_init, and the other is started by otg thread at SMP platform. The reason for this problem is ehci_init_driver will do memory copy for current uniform hc_driver, and this memory copy will do memset (as 0) first, so when the first hcd is running usb_add_hcd, and the second hcd may clear the uniform hc_driver's space (at ehci_init_driver), then the first hcd will meet NULL pointer at the same time. See below two logs: LOG_1: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = 80004000 [00000014] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-222193-g24b2734-dirty torvalds#25 Workqueue: ci_otg ci_otg_work task: d839ec00 ti: d8400000 task.ti: d8400000 PC is at ehci_run+0x4c/0x284 LR is at _raw_spin_unlock_irqrestore+0x28/0x54 pc : [<8041f9a0>] lr : [<8070ea84>] psr: 60000113 sp : d8401e30 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : 00000000 r7 : 00000000 r6 : d8419940 r5 : 80dd24c0 r4 : d8419800 r3 : 8001d060 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd8400238) Stack: (0xd8401e30 to 0xd8402000) 1e20: d87523c0 d8401e48 66667562 d8419800 1e40: 00000000 00000000 d8419800 00000000 00000000 00000000 d84198b0 8040fcdc 1e60: 00000000 80dd320c d8477610 d8419c00 d803d010 d8419800 00000000 00000000 1e80: d8004400 00000000 d8400008 80431494 80431374 d803d100 d803d010 d803d1ac 1ea0: 00000000 80432428 804323d4 d803d100 00000001 80435eb8 80e0d0bc d803d100 1ec0: 00000006 80436458 00000000 d803d100 80e92ec8 80436f44 d803d010 d803d100 1ee0: d83fde00 8043292c d8752710 d803d1f4 d803d010 8042ddfc 8042ddb8 d83f3b00 1f00: d803d1f4 80042b60 00000000 00000003 00000001 00000001 80054598 d83f3b00 1f20: d8004400 d83f3b18 d8004414 d8400000 80e3957b 00000089 d8004400 80043814 1f40: d839ec00 00000000 d83fcd80 d83f3b00 800436e4 00000000 00000000 00000000 1f60: 00000000 80048f34 00000000 00000000 00000000 d83f3b00 00000000 00000000 1f80: d8401f80 d8401f80 00000000 00000000 d8401f90 d8401f90 d8401fac d83fcd80 1fa0: 80048e68 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<8041f9a0>] (ehci_run) from [<8040fcdc>] (usb_add_hcd+0x248/0x6e8) [<8040fcdc>] (usb_add_hcd) from [<80431494>] (host_start+0x120/0x2e4) [<80431494>] (host_start) from [<80432428>] (ci_otg_start_host+0x54/0xbc) [<80432428>] (ci_otg_start_host) from [<80435eb8>] (otg_set_protocol+0xa4/0xd0) [<80435eb8>] (otg_set_protocol) from [<80436458>] (otg_set_state+0x574/0xc58) [<80436458>] (otg_set_state) from [<80436f44>] (otg_statemachine+0x408/0x46c) [<80436f44>] (otg_statemachine) from [<8043292c>] (ci_otg_fsm_work+0x3c/0x190) [<8043292c>] (ci_otg_fsm_work) from [<8042ddfc>] (ci_otg_work+0x44/0x1c4) [<8042ddfc>] (ci_otg_work) from [<80042b60>] (process_one_work+0xf4/0x35c) [<80042b60>] (process_one_work) from [<80043814>] (worker_thread+0x130/0x3bc) [<80043814>] (worker_thread) from [<80048f34>] (kthread+0xcc/0xe4) [<80048f34>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: e5953018 e3530000 0a000000 e12fff33 (e5878014) LOG_2: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 In Online 00:00ternal e Offline rror: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-02007-g24b2734-dirty torvalds#127 Workque Online 00:00ue: ci_o Offline tg ci_otg_work Online 00:00task: d8 Offline 39ec00 ti: d83ea000 task.ti: d83ea000 PC is at 0x0 LR is at usb_add_hcd+0x248/0x6e8 pc : [<00000000>] lr : [<8040f644>] psr: 60000113 sp : d83ebe60 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : d85fd4b0 r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : d85fd400 r3 : 00000000 r2 : d85fd4f4 r1 : 80410178 r0 : d85fd400 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd83ea238) Stack: (0xd83ebe60 to 0xd83ec000) be60: 00000000 80dd920c d8654e10 d85fd800 d803e010 d85fd400 00000000 00000000 be80: d8004400 00000000 d83ea008 80430e34 80430d14 d803e100 d803e010 d803e1ac bea0: 00000000 80431dc8 80431d74 d803e100 00000001 80435858 80e130bc d803e100 bec0: 00000006 80435df8 00000000 d803e100 80e98ec8 804368e4 d803e010 d803e100 bee0: d86e8100 804322cc d86cf050 d803e1f4 d803e010 8042d79c 8042d758 d83cf900 bf00: d803e1f4 80042b78 00000000 00000003 00000001 00000001 800545e8 d83cf900 bf20: d8004400 d83cf918 d8004414 d83ea000 80e3f57b 00000089 d8004400 8004382c bf40: d839ec00 00000000 d8393780 d83cf900 800436fc 00000000 00000000 00000000 bf60: 00000000 80048f50 80e019f4 00000000 0000264c d83cf900 00000000 00000000 bf80: d83ebf80 d83ebf80 00000000 00000000 d83ebf90 d83ebf90 d83ebfac d8393780 bfa0: 80048e84 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ee66e85d 133ebd03 [<804 Online 00:000f644>] Offline (usb_add_hcd) from [<80430e34>] (host_start+0x120/0x2e4) [<80430e34>] (host_start) from [<80431dc8>] (ci_otg_start_host+0x54/0xbc) [<80431dc8>] (ci_otg_start_host) from [<80435858>] (otg_set_protocol+0xa4/0xd0) [<80435858>] (otg_set_protocol) from [<80435df8>] (otg_set_state+0x574/0xc58) [<80435df8>] (otg_set_state) from [<804368e4>] (otg_statemachine+0x408/0x46c) [<804368e4>] (otg_statemachine) from [<804322cc>] (ci_otg_fsm_work+0x3c/0x190) [<804322cc>] (ci_otg_fsm_work) from [<8042d79c>] (ci_otg_work+0x44/0x1c4) [<8042d79c>] (ci_otg_work) from [<80042b78>] (process_one_work+0xf4/0x35c) [<80042b78>] (process_one_work) from [<8004382c>] (worker_thread+0x130/0x3bc) [<8004382c>] (worker_thread) from [<80048f50>] (kthread+0xcc/0xe4) [<80048f50>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: bad PC value Cc: Jun Li <[email protected]> Cc: <[email protected]> Cc: Alan Stern <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Peter Chen <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.