Numark Mixtrack Pro 3
- Manufacturer's product page
- Forum thread
- Download mapping for Mixxx 2.0 (mapping is included in Mixxx 2.1)
The Numark Mixtrack 3 and Numark Mixtrack Pro 3 are the same controller except that the Pro version has an integrated 4 channel output sound card and costs $50 more. If you use the non-Pro version, you would need a splitter cable or separate audio interface to be able to preview tracks in headphones.
The microphone input on the Pro version is not available to the computer through the controller's sound card. It is mixed with the master output in hardware, so this controller's sound card is not suitable for broadcasting or recording the inputs. If you want to use the controller for broadcasting or recording, getting the non-Pro version with a separate USB audio interface with a microphone input is suggested.
Configuration options can be set in the mapping. You will need to edit the values below at the very top of the JavaScript file “Numark-Mixtrack-3-scripts.js” and save changes. Allowed values are “true” or “false” unless specified.
- TrackEndWarning: whether the Wheel button flashes near the end of a track
- iCutEnabled: whether to enable iCut with the jog wheel. See #platter/jog wheel section for details
- fastSeekEnabled: whether to enable fast seeking with the jog wheel. See #platter/jog wheel section for details
- smartPFL: When the Load button is used, the Cue/PFL button is automatically activated on the deck being loaded and deactivated on the other deck
- beatlooprollActivate: Use beatlooproll (slip mode loop) instead of beatloop command when using pads in Autoloop mode
- DarkMetalSkin: Specify if Dark Metal skin is used for your installation. This is required in order for Expand Library feature to work properly.
- FXMode: Select FX Mode based on skin used:
* value "**1**": (Deere skin): Each deck is assigned its own Effect Unit with 3 effects per deck (e.g. Deck 1 = Effect Unit 1, Deck 2 = Effect Unit 2, etc...\\
* value "**2**": (other skins): FX button 1 = Effect Unit 1, Effect 1, FX Button 2 = Effect Unit 2, Effect 1, FX button 3 = Effect Unit 3, Effect 1. Effect settings are shared by each deck.\\
* **PitchBendOnWheelOff**: allow nudge with wheel when wheel is not active.
* **noPlayOnSyncDoublePress**: Specify if Play is disabled on Sync button Double Press.
* **ShiftFilterFX4**: Specify Shift+Filter control behavior - FX parameter 4 (true) or Channel Gain (false)
Rotate this knob to cycle through tracks in main library window. Press
the Knob to expand library view.
Shift + Turn: allows selecting Play Lists and side navigation bar
items.
Shift + Push: opens / closes selected side navigation bar item.
Adjusts the master volume in the software.
Note: This control does not affect the microphone volume which is
summed with the final output of the Master Gain to the Master Output.
Use the Mic Gain knob to control the microphone volume.
Adjusts the software’s audio output to the headphones, mixing between the cue (PFL) output and the master mix output.
Adjusts the volume for headphone cueing in the software.
Press one of these buttons while a track is selected in the library
window to assign it to Deck 1 and 2, respectively, in the software.
Shift + Load: Activates Fader Start mode for the corresponding (PFL
Button is then blinking). Fader start guide: In fader start mode, not
only you can press the play/pause button to play/pause the track, but if
you move up the level fader (the volume fader if you prefer) of the
deck, the track will be played and if you close it to zero, the track
will be paused.
Configurable option:
If the smartPFL option is set to true, the
Cue/PFL button is automatically activated on the deck being loaded and
deactivated on the other deck.
Adjust High frequencies of the deck
Shift + High : Adjust FX 1, parameter 1 of the Effect Unit assigned
to the deck
Padmode + high : Adjust FX 2, parameter 1 of the Effect Unit
assigned to the deck
Tap + high : Adjust FX 2, parameter 1 of the Effect Unit assigned to
the deck
Adjust Mid frequencies of the deck
Shift + Mid: Adjust FX 1, parameter 2 of the Effect Unit assigned to
the deck
Padmode + Mid: Adjust FX 2, parameter 2 of the Effect Unit assigned
to the deck
Tap + Mid: Adjust FX 3, parameter 2 of the Effect Unit assigned to
the deck
Adjust Low frequencies of the deck
Shift + Mid: Adjust FX 1, parameter 3 of the Effect Unit assigned to
the deck
Padmode + Mid: Adjust FX 2, parameter 3 of the Effect Unit assigned
to the deck
Tap + Mid: Adjust FX 3 parameter 3 of the Effect Unit assigned to
the deck
Adjusts the amount of the filter effect. Turning the knob left controls
the low pass filter; turning it right controls the high pass filter.
Shift + Filter: Adjust FX 1, parameter 4 of the Effect Unit assigned
to the deck
Padmode + Filter: Adjust FX 2, parameter 4 of the Effect Unit
assigned to the deck
Tap + Filter: Adjust FX 3, parameter 4 of the Effect Unit assigned
to the deck
Sends pre-fader audio to the headphone output
SHIFT + press: toggle slip mode
SHIFT + double press: toggle quantize mode
Adjusts the volume of the deck
Controls the blend between the two decks
Press and hold to momentarily reduce the speed of the track.
Shift+Pitch Bend Down/Up: Jump 1 beat backward/forward
Adjust the speed of the music (activate keylock to adjust tempo without affecting pitch). Note that moving the fader down increases speed, as marked by the "+" at the bottom of the fader on the controller. This can be reversed in Mixxx's preferences under Interface > Speed slider direction
Use the Touch Strip to adjust the deck’s Effect Unit Superknob. If
Effects are assigned to Instant FX , they will be enabled instantly on
touch, and disabled on finger lift.
Shift + Touch Strip: search through a track’s timeline
Adjusts the Dry/Wet mix of the deck’s Effect Unit
Shift + Beats: Moves the beat grid left (turn counterclockwise) or
right (turn clockwise) Padmode + Beats: Adjust Sampler Volume. Left
beat knob will adjusts Samplers 1-4; Right knob will adjusts Samplers
5-8
Enables FX 1 of the deck’s Effect Unit (Deck 1 = Unit 1, Deck 2 = Unit
2, Deck 3 = Unit 3, Deck 4 = Unit 4)
Shift + FX 1: Select from the list of available effects for the
respective effect.
Padmode + FX 1: Activates Brake effect
Tap + FX 1: Assign / unassign FX 1 to Instant FX. When assigned to
Instant FX, the FX is instantly activated by touching the Strip and
stopped when finger is lifted.
Enables FX 2 of the deck’s Effect Unit (Deck 1 = Unit 1, Deck 2 = Unit
2, Deck 3 = Unit 3, Deck 4 = Unit 4)
Shift + FX 2: Select from the list of available effects for the
respective effect.
Padmode + FX 2: Activates Spinback effect
Tap + FX 2: Assign / unassign FX 1 to Instant FX. When assigned to
Instant FX, the FX is instantly activated by touching the Strip and
stopped when finger is lifted.
Enables FX 3 of the deck’s Effect Unit (Deck 1 = Unit 1, Deck 2 = Unit
2, Deck 3 = Unit 3, Deck 4 = Unit 4)
Shift + FX 3: Select from the list of available effects for the
respective effect.
Tap + FX 3: Assign / unassign FX 1 to Instant FX. When assigned to
Instant FX, the FX is instantly activated by touching the Strip and
stopped when finger is lifted.
Press this 8 or more times on beat to manually enter a new BPM. The
software will ignore the track's BPM and follow your manually entered
tempo.
Shift + Tap: Toggles deck between deck 1-3 (left side) or deck 2-4
(right side). TAP LED will be RED when deck 3 is active (Left Tap) or
deck 4 is active (Right Tap)
Activate this button to use the platter/jog wheel to grab and move the audio, scratching the track like a vinyl record.
Touch side: Pitch bend (nudging) if track is playing (Wheel On
(always) & Wheel Off - if PitchBendOnWheelOff
configuration option is true) and / track positioning (Wheel On)
Wheel On + Touch platter: scratching: touch the platter and move
it
Shift + Wheel On + Touch platter: iCut mode: simulates a scratch
routine with the jog wheel. When the jog wheel is turned back, the
crossfader closes; when the jog wheel is turned forward the crossfader
will open. As a visual reference, TAP LED and Wheel button LED will be
ON.
Wheel Button Off + Touch platter: If track is not playing, allows
positionning the track
Shift + Wheel Off + Touch platter: fast seek through track
Configuration Options: The iCutEnabled and fastSeekEnabled options can be used to turn off iCut and fast seeking. These options may be helpful to avoid accidentally using these features when touching the platter with shift lock on.
Allows multiple control commands to be triggered when pressed first
along with other buttons
Single Press : Temporary SHIFT
Double press (like a double click): SHIFT Lock enabled (TAP LED will
remain ON if Shift Lock is enabled)
Press and release: toggle off SHIFT Lock if enabled
This is used to change the operation mode of the top 4 performance pads. Pressing this button will light the pad indicating the currently active mode (Manual Loop, Auto Loop or Sampler).
Enables BPM syncing between decks.
Short Press: Press once to synchronize the tempo (BPM) to that of to
that of the other track
Double Press: press twice QUICKLY to play the track immediately
synchronized to the tempo (BPM) and to the phase of the other track, if
the track was paused
Long Press (Sync Lock): Hold for at least half of a second to enable
sync lock for this deck. Decks with sync locked will all play at the
same tempo, and decks that also have quantize enabled will always have
their beats lined up. If the Sync Lock was previously activated, it just
deactivates it regardless of the Short press/Double Press
Shift + Sync: Toggle Key Lock
Configuration Options: The noPlayOnSyncDoublePress option can be used to turn off Play on Sync Double Press.
Behavior depends on the cue
mode
set in the Mixxx preferences.
Shift + Cue: return the play head to the start of the track.
Starts and suspends playback. If no track is loaded, loads the selected
track (if any) and play.
Shift + Play/Pause: stutter the track from the last set cue point.
If a cue point has not been set, the play head will return to the start
of the track.
The top row of pads is for controlling loops and samples. To select a mode, hold down the Pad Mode button and press one of the upper pads. An LED under the pad section indicates the currently selected mode. See the subsections below for details about each mode.
The bottom row of pads is used to trigger hotcue points. If a hotcue
point has not already been set for the loaded track, this control will
mark the hotcue point. If a hotcue point has already been set, this
control will jump to it.
Shift + Hot Cue: Deletes the assigned hotcue point
Hold Pad Mode and press the pad marked Manual Loop (silkscreened above the pad) to assign the lower 4 pads to the functions listed below:
- Loop In – Sets the beginning of a loop: When assigned, the Pad LED will light blue
- Loop Out – Sets the end point for the loop: When assigned, the Pad LED will light blue
- On/Off – (De)activate the loop. If a loop has not been set, this button will have no effect.: When assigned, the Pad LED will light blue
- Loop x1/2 – Halve the length of the loop. Press Shift + Loop x1/2 to double the length of the loop.
Hold Pad Mode and press the pad marked Autoloop to assign the lower 4
pads to the functions listed below: When assigned, the respective Pad
LED will blink Yellow
* Auto 1 – Sets and starts playback of a 2-beat autoloop.
- Auto 2 – Sets and starts playback of a 4-beat autoloop.
- Auto 3 – Sets and starts playback of a 8-beat autoloop.
-
Auto 4 – Sets and starts playback of a 16-beat autoloop.
* Shift + Auto 1 – Sets and starts playback of a 1/8-beat autoloop. - Shift + Auto 2 – Sets and starts playback of a 1/4-beat autoloop.
- Shift + Auto 3 – Sets and starts playback of a 1/2-beat autoloop.
- Shift + Auto 4 – Sets and starts playback of a 1-beat autoloop.
If the pad is held down more than .5 second (Long Press), the Autoloop will be disabled once pad is released. On Short Press, the pad will behave as a normal button (ON on first press, OFF on second press)
Hold Pad Mode and press the pad marked Sampler to assign the lower 4
pads to the functions listed below. When assigned, the respective Pad
LED will blink Purple
Shift + Sample X will play loaded sample, but with Sampler unit Sync
disabled
- Deck 1 - Sample 1 – Plays the sample assigned to Sample Pad 1 with the unit Sync activated.
- Deck 1 - Sample 2 – Plays the sample assigned to Sample Pad 2 with the unit Sync activated.
- Deck 1 - Sample 3 – Plays the sample assigned to Sample Pad 3 with the unit Sync activated.
- Deck 1 - Sample 4 – Plays the sample assigned to Sample Pad 4 with the unit Sync activated.
- Deck 2 - Sample 1 – Plays the sample assigned to Sample Pad 5 with the unit Sync activated.
-
Deck 2 - Sample 2 – Plays the sample assigned to Sample Pad 6
with the unit Sync activated.
* Deck 2 - Sample 3 – Plays the sample assigned to Sample Pad 7 with the unit Sync activated.
* Deck 2 - Sample 4 – Plays the sample assigned to Sample Pad 8 with the unit Sync activated.
If the pad is held down more than .5 second (Long Press), the sampler will be disabled once pad is released. On Short Press, the pad will behave as a normal button (ON on first press, OFF on second press)
Displays the audio level going to the Master Output.
This set of changes is implemented in development versions of Mixxx 2.1 available from the build server.
Some configuration options that exist in 2.0 are no longer available in 2.1. Version 2.1 supports the following options:
- TrackEndWarning: whether the Wheel button flashes near the end of a track
- iCutEnabled: whether to enable iCut with the jog wheel. See #platter/jog wheel section for details
- smartPFL: When the Load button is used, the Cue/PFL button is automatically activated on the deck being loaded and deactivated on the other deck
- noPlayOnSyncDoublePress: Specify if Play is disabled on Sync button Double Press.
- ShiftFilterFX4: Specify Shift+Filter control behavior - FX parameter 4 (true) or Channel Gain (false)
- PitchBendOnWheelOff: allow nudge with wheel when wheel is not active.
- Focus effect with FX button
- Toggle effect with Tap + FX button
- Move mapping of InstantFX to Padmode + FX button
- Shift + High controls parameter 1 of focused effect
- Shift + Mid controls parameter 2 of focused effect
- Shift + Low controls parameter 3 of focused effect
- Shift + Filter controls parameter 4 of focused effect
If no effects are focused, the super knob of the effect rack is controlled by the touch strip. If an effect is focused, the touch strip controls the meta knob of the focused effect. If any effects are added to InstantFX, they are turned on when the touch strip is activated, and off when it is not. While active, the meta knobs associated with effects with InstantFX enabled are controlled by the touch strip.
- Load sample by selecting track and pressing Sample X
- Pressing sample button when sample is already playing goes back to cue and plays
- Shift + sample to stop sample
- Eject sample by Tap + Sample X
- Adjust beatjump amount with Shift + Beats knob
- Beatjump with Shift + Pitch Bend +/-. If loop is activated, move loop by beatjump amount instead.
- Starting with commit 2c129ea0af838543b987d55538b903e115f08ba5, the Loop x1/2 button is disabled unless the corresponding deck is set to be quantized
- Move slip mode to Shift + Wheel
- Move quantize toggle to Shift + PFL (single press)
- Move beat grid alignment to Tap + Beats knob
This is the Mixxx Wiki - 
Mixxx is a free and open-source DJ software.
Manual
Hardware Compatibility
Reporting Bugs
Getting Involved
Contribution Guidelines
Coding Guidelines
Using Git
Developer Guide
Creating Skins
Contributing Mappings
Mixxx Controls
MIDI Scripting
Components JS
HID Scripting