Bugfix 2.0.x (#1)

* Don't test certain changes

* Reset runout.ran_out on resume (MarlinFirmware#16230)

* Step timing cleanup and rounding fix (MarlinFirmware#16258)

* Add MRR_ESPA/_ESPE (ESP32) boards (MarlinFirmware#16238)

* Add Ender-5 Pro config (MarlinFirmware#16221)

* Add FLYBOARD (STM32F407ZG) (MarlinFirmware#16257)

* Fix STM32 flush of TX (used by UBL) (MarlinFirmware#16197)

* Flash leveling (for some STM32) (MarlinFirmware#16174)

* Some ESP32 patches (MarlinFirmware#16297)

* MKS SGen-L pins EEBF or EFBF scheme (MarlinFirmware#16296)

* Add Rumba32 support for PIO (MarlinFirmware#16202)

* MKS Robin 2 (STM32F407ZE) base support (MarlinFirmware#16270)

* Update Czech language (MarlinFirmware#16305)

* Sync SKR E3 configs (MarlinFirmware#16301)

* Add NOZZLE_AS_PROBE (no probe offsets) (MarlinFirmware#15929)

* Update README with status badge, etc.

* Split up HAL items

* Update mfpub for current MarlinDocumentation

* Fix Max7219 with 256 or more cels

* Fix games menu back item, titles

* Update comments re: NOZZLE_AS_PROBE

* Fix min limit for acc, feed, jerk (MarlinFirmware#16416)

* Improve Renkforce configs (MarlinFirmware#16417)

* Permit ENDSTOP_INTERRUPTS_FEATURE on more STM32 (MarlinFirmware#16412)

* Improve STEVAL_3DP001V1 and future STEVAL_* support (MarlinFirmware#16404)

* MKS Robin ILI9328 TFT support (MarlinFirmware#16401)

* Disable PIDTEMPBED for SKR Mini E3 (MarlinFirmware#16396)

* Return from loop() on non-AVR boards (MarlinFirmware#16390)

* Refactor TMC-related macros and sanity checks (MarlinFirmware#16384)

* Add FILAMENT_UNLOAD_PURGE_FEEDRATE (MarlinFirmware#16372)

* Fix some DOGM warnings (MarlinFirmware#16363)

* Fix warnings in stepper.cpp (MarlinFirmware#16364)

* Fix PrintrBoard build (ignore TMC libraries) (MarlinFirmware#16346)

(In future try to get Teensy processors better supported by `TMCStepper`.)

* Clean up trailing whitespace

* PWM pin not needed for Neopixel brightness / submenu (MarlinFirmware#16345)

* Misc patches preceding DGUS PR

* Fix Visual Micro "Arduino IDE for Visual Studio" support (MarlinFirmware#16418)

* Update Russian language (MarlinFirmware#16426)

* STM32F1: Fix misleading indent / nullptr on FSMC (MarlinFirmware#16431)

* Z-offset edit precision based on value limits (MarlinFirmware#16425)

* Add Ender-5 leadscrew README (MarlinFirmware#16424)

* Add motherboard BIGTREE_SKR_V1.4_TURBO  (MarlinFirmware#16374)

* Enable MULTI_NOZZLE_DUPLICATION for BIBO (MarlinFirmware#16435)

* Touch UI: Fix UBL mesh value editing (MarlinFirmware#16432)

* Sidewinder X1 Config Updates (MarlinFirmware#16315)

* Add Leapfrog Xeed 2015 support (MarlinFirmware#16400)

* Improve JGAurora A1/A5S touch buttons (MarlinFirmware#16394)

* Standardize drivers.h values, add class indirection (MarlinFirmware#16448)

* Update Russian language (MarlinFirmware#16440)

* BTT002: Add runout, PLR, and RGB pins (MarlinFirmware#16442)

* Pins debugging AVR serial pins (MarlinFirmware#16437)

* Fix MIN_PROBE_EDGE bug in default ABL G29 (MarlinFirmware#16367)

* Temporary CI fix for STM32

* Use a default monitor_speed of 250000

* MSG_WATCH => MSG_INFO_SCREEN

* Add EVNOVO (Artillery) Genius config (MarlinFirmware#16320)

* Fixed Creality CR-20 Pro configuration example (MarlinFirmware#16332)

* FYSETC F6 v1.4 board support (MarlinFirmware#16321)

* Add example configs. Expand custom menu. (MarlinFirmware#16286)

- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12

* Fix Ender-2 display pins, add BTN_ENC (MarlinFirmware#16349)

* Update and fix DGUS (MarlinFirmware#16317)

* Fix serials available on SKR Pro 1.1 (MarlinFirmware#16439)

* Fix daily date bump action

* Action to check PRs

* Update maintainer funding links

* Skip build tests on forks

* Update git helper usage

* Fix EEPROM error with EXTRUDERS == 0 (MarlinFirmware#16464)

* Fix M115 cap with EXTRUDERS == 0 (MarlinFirmware#16459)

* Add option to invert joystick axes (MarlinFirmware#16466)

* Update Russian language (MarlinFirmware#16461)

* Fix permyriad progress bar (MarlinFirmware#16460)

* Improve French language (UBL) (MarlinFirmware#16453)

* Followup to EEPROM patch (MarlinFirmware#16470)

* Remove extra UBL map edit menu item (MarlinFirmware#16451)

* Fix unused var warning (MarlinFirmware#16467)

* Update U20 config to help UBL toggle (MarlinFirmware#16471)

* Move auto_build.py to 'vscode' folder

* Fix MKS_SGEN sanity check (MarlinFirmware#16501)

* Fix EEPROM array size bug (MarlinFirmware#16475)

* Fix SKR Pro BLTouch conflicting timers (MarlinFirmware#16499)

* Provide some missing Arduino macros (MarlinFirmware#16497)

* Fix Change Filament menu item with runout (MarlinFirmware#16485)

* Fix LCD for Tevo Tornado (MarlinFirmware#16474)

* Update workflow skip condition

* Add menu item Tune > Advance K (MarlinFirmware#16488)

* Extend SERIAL_CHAR to take multiple arguments

* Code style and comment tweaks

* Correct ESP32 CPU speed in README (MarlinFirmware#16472)

* Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (MarlinFirmware#16510)

* Fix compile error w/out LCD (MarlinFirmware#16502)

* Add Probe Offsets menu (MarlinFirmware#16444)

* Fix Probe Offset XY edit items (et Français) (MarlinFirmware#16523)

* Update Russian language (MarlinFirmware#16522)

* [cron] Bump distribution date (2020-01-10)

* Prevent Z misaligment on tool change (MarlinFirmware#16518)

* Update Italian language (MarlinFirmware#16527)

* ESP3d integration for ESP32 (MarlinFirmware#16515)

* [cron] Bump distribution date (2020-01-11)

* Migrate actions to default (2.0.x) branch

* Only constrain motion on homed axes (MarlinFirmware#16533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix probeless delta build (MarlinFirmware#16537)

* Use RECIPROCAL macro (not _RECIP) (MarlinFirmware#16530)

* [cron] Bump distribution date (2020-01-12)

* Restore test_builds action to bugfix

* Update auto_build.py paths for Atom/Sublime

* [cron] Bump distribution date (2020-01-13)

* Add GTM32 (STM32F103VET6) environment (MarlinFirmware#16454)

* Power options formatting

* Geeetech G2Pro configuration (MarlinFirmware#16553)

* Fix Linux upload path detection (MarlinFirmware#16514)

* Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support (MarlinFirmware#16538)

* Clean up whitespace

* [cron] Bump distribution date (2020-01-14)

* Improved STMicro L64XX stepper driver support (MarlinFirmware#16452)

* Make lcd_power_loss_recovery_cancel exportable

* Fix PLR cancel with ExtUI (MarlinFirmware#16556)

* Bring MP_SCARA config up to date

* Fix Fysetc S6 FLASH_PAGE_SIZE and test build (MarlinFirmware#16560)

* [cron] Bump distribution date (2020-01-15)

* Update more configs

* Move configurations to a separate repo

* Fix build error with unsupported reset flags (MarlinFirmware#16562)

* Steval_3DP001V1 timers, analog inputs, etc. (MarlinFirmware#16565)

* Use Flash EEPROM on BTT002 (MarlinFirmware#16558)

* Get test configs from GitHub

* Fix typo

* Nikon IR support for time lapse photos (MarlinFirmware#16539)

* Adjustable ADC debounce delay (MarlinFirmware#16264)

* [cron] Bump distribution date (2020-01-16)

* STM32 RODATA LENGTH (MarlinFirmware#16580)

* Fix I2C address of MCP4728 on LPC176x (MarlinFirmware#16578)

* Fix GTM32 environment (to prevent a crash)

* Fix some warnings, Melzi pins

* Move macros to stepper/indirection

* Fix TOUCH_UI_FTDI_EVE bugs (MarlinFirmware#16540)

* ESP32 HAL: Fix random pauses during prints (MarlinFirmware#16548)

* [cron] Bump distribution date (2020-01-17)

* STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (MarlinFirmware#16579)

* Clean up HAL ADC, old test scripts

* Adjust GTM32 build flags (MarlinFirmware#16582)

* Shared SPI sanity check (MarlinFirmware#16581)

* More CI test updates

* Update FYSETC S6 pins (MarlinFirmware#16559)

* PINDA v2 temperature sensor / compensation (MarlinFirmware#16293)

* [cron] Bump distribution date (2020-01-18)

* Allow RRW Keypad with any LCD

* [cron] Bump distribution date (2020-01-19)

* [cron] Bump distribution date (2020-01-20)

* Fix M112 with Emergency Parser

* Simplify TMC monitor code

* Updates for L64XX

* Function-like macros

* Use bool in pin compare

* Patch for _STEP_INIT

* Simplify a drivers.h macro (MarlinFirmware#16589)

* SAMD51: ADC for probe temperature compensation (MarlinFirmware#16596)

* Update FYSETC S6 Peripheral Pins (MarlinFirmware#16593)

* Update BTT002 pins (MarlinFirmware#16591)

* Reset shutdown timer on M85 (MarlinFirmware#16587)

* AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial (MarlinFirmware#16421)

* STEVAL_3DP001V1: Easier Serial2 (for WIFI interface) (MarlinFirmware#16599)

* Fix Greek language string (MarlinFirmware#16601)

* Quad Z stepper support (MarlinFirmware#16277)

* LPC1768: Allow I2C master channel override (MarlinFirmware#16584)

* Move steps/mm out of slim menus (MarlinFirmware#16603)

* Fix CHAMBER_MAXTEMP security margin (MarlinFirmware#16600)

* L64xx M906 Fix status variable, formatting (MarlinFirmware#16597)

* Provide methods for M420 + MBL (MarlinFirmware#16602)

* [cron] Bump distribution date (2020-01-21)

* Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning (MarlinFirmware#16621)

* Override for LPC1768 u8g/digipot I2C master ID (MarlinFirmware#16622)

* Release UI on G26 priming timeout (MarlinFirmware#16449)

* Add HMS434 V15 ATSAM board (MarlinFirmware#16620)

* Tweak some config spacing

* G12 defaults per tool. Event G-code for post-toolchange (MarlinFirmware#16554)

* Arc segment radius scaling (MarlinFirmware#16551)

* Update mfdoc, mfpub

* [cron] Bump distribution date (2020-01-22)

* Tweak mfpub stashing

* [cron] Bump distribution date (2020-01-23)

* Enable use of latest TMCStepper on MKS Robin Nano (MarlinFirmware#16652)

* [cron] Bump distribution date (2020-01-24)

* Convert chars only for enabled languages

* Extra debugging for leveling on/off

* Bring configs and drivers.h up to date

* Duet Smart Effector support (MarlinFirmware#16641)

* BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (MarlinFirmware#16595)

* [cron] Bump distribution date (2020-01-26)

* Fix DELTA_CALIBRATION_MENU recursive call (MarlinFirmware#16656)

* Fix MKS Base + Digipot compile error (MarlinFirmware#16636)

* Add ESP3DLib idletask entry point (MarlinFirmware#16658)

* Fix Serial defines for M43 on AVR (MarlinFirmware#16649)

* Fix HOMING_BACKOFF_MM for DELTA (MarlinFirmware#16657)

* Clean up PID language defines

* More 8 extruder defines

* Update Slovak language (MarlinFirmware#16646)

* Fix M43 timer report on AVR (MarlinFirmware#16645)

* Fix Spanish (swapped BLTouch strings) (MarlinFirmware#16637)

* SKR 1.3 sensorless endstops hack (MarlinFirmware#16659)

* Fix PID F menu label

* [cron] Bump distribution date (2020-01-27)

* Preserve CWD for write/remove file (MarlinFirmware#16667)

* Rename some temperature members

* Fix Trigorilla 1.4 limit switches

See MarlinFirmware#16612

* Fix serial port redirection (index ≠ port num) (MarlinFirmware#16687)

* G60/G61 Position Save/Restore (MarlinFirmware#16557)

* Remove extraneous G60/G61 lines

* Fix Manual Bed Leveling with multiple extruders (MarlinFirmware#16688)

* [cron] Bump distribution date (2020-01-28)

* Prevent SD access from resetting ESP32 (MarlinFirmware#16690)

* [cron] Bump distribution date (2020-01-29)

* Fix Toolchange (!no_move) return to status (MarlinFirmware#16699)

* [cron] Bump distribution date (2020-01-30)

* Cleanup of old includes, add comments

* Fix HAS_FAN macro (MarlinFirmware#16717)

* Fix probe temp calibration (MarlinFirmware#16718)

* Support for E4d@BOX mainboard (MarlinFirmware#16716)

* Fix missing string for M48 build (MarlinFirmware#16708)

* Fix G60/G61 slots > 8 and compile error (MarlinFirmware#16715)

* Move L64XX index_to_axis to progmem (MarlinFirmware#16697)

* Refactor heater watch, job timer auto-start (MarlinFirmware#16725)

* Auto assign DIAG pins for multi-endstop (MarlinFirmware#16723)

* Tweak G60/G61 slots

* Fix compile error in SdVolume on ESP32 (MarlinFirmware#16728)

* Simultaneous use of rotary encoder and touch buttons (MarlinFirmware#16729)

* Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo (MarlinFirmware#16727)

* Extend RX/TX pins for up to 8 extruders

* Fix up, improve endstop pin auto-assignment

Followup for MarlinFirmware#16723

* (21) PT100 for MCUs with 3.3v logic (MarlinFirmware#16731)

* [cron] Bump distribution date (2020-01-31)

* Add sanity-check for new Advanced Pause option

Followup to MarlinFirmware#16372

* Include macros for delta ABC

* Update Russian language (MarlinFirmware#16745)

* Fix BTT SKR 1.4 extra endstop pins (MarlinFirmware#16738)

* Option for Trigorilla 1.4 with add-on endstops board (MarlinFirmware#16737)

* Consistent M112 with Emergency Parser (MarlinFirmware#16747)

* Improve mfadd helper script

- Use the original branch name if none is supplied
- Set the remote tracking to the source
- Accept User/Branch or User:Branch syntax

* Clean up i2c encoder, sanitize serial

* Misc cleanup, whitespace

* Encapsulate probe as singleton class (MarlinFirmware#16751)

* G34 automatic point assignment (MarlinFirmware#16473)

* Fix Temperature::over_autostart_threshold (MarlinFirmware#16749)

* Update Russian language (MarlinFirmware#16750)

* Fix CURRENT_STEP_DOWN compile error

* Drop obsolete SD special char handling

See MarlinFirmware#14035

* Probe singleton patch

Followup to MarlinFirmware#16751

* Fix RGB / Neopixel white color bug

See MarlinFirmware#16752

* Suppress a compile warning

* More 8-extruder fixups

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Tanguy Pruvot <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Luc <[email protected]>
Co-authored-by: thisiskeithb <[email protected]>
Co-authored-by: FLYmaker <[email protected]>
Co-authored-by: randellhodges <[email protected]>
Co-authored-by: ferengi82 <[email protected]>
Co-authored-by: Luu Lac <[email protected]>
Co-authored-by: petrzjunior <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Dirk O. Kaar <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Bob Kuhn <[email protected]>
Co-authored-by: Alexander Gavrilenko <[email protected]>
Co-authored-by: swilkens <[email protected]>
Co-authored-by: Lino Barreca <[email protected]>
Co-authored-by: rado79 <[email protected]>
Co-authored-by: Acenotass <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Walt Sorensen <[email protected]>
Co-authored-by: yedey <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Vertabreaker <[email protected]>
Co-authored-by: greppp <[email protected]>
Co-authored-by: Jamie <[email protected]>
Co-authored-by: Justin <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: 0r31 <[email protected]>
Co-authored-by: Alejandro Aguilera <[email protected]>
Co-authored-by: meponderR <[email protected]>
Co-authored-by: Mehdi Beyk Mohamadi <[email protected]>
Co-authored-by: FlyingSamson <[email protected]>
Co-authored-by: Ryan V1 <[email protected]>
Co-authored-by: David Klasinc <[email protected]>
Co-authored-by: gjdodd <[email protected]>
Co-authored-by: Dennis <[email protected]>
Co-authored-by: felixstorm <[email protected]>
Co-authored-by: vivian-ng <[email protected]>
Co-authored-by: tompe-proj <[email protected]>
Co-authored-by: MaukCC <[email protected]>
Co-authored-by: Ryan <[email protected]>
Co-authored-by: Artur Petrzak <[email protected]>
Co-authored-by: yangwenxiong <[email protected]>
Co-authored-by: Roman Moravčík <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: Hans007a <[email protected]>
Co-authored-by: Neskik <[email protected]>
Co-authored-by: Mauro <[email protected]>
Co-authored-by: Radek Pietruszewski <[email protected]>
Co-authored-by: chgi <[email protected]>
Co-authored-by: Robert Stein <[email protected]>
Co-authored-by: rebel1 <[email protected]>

.github/FUNDING.yml

@@ -1 +1,3 @@
-custom: http://www.thinkyhead.com/donate-to-marlin
+github: [thinkyhead]
+patreon: thinkyhead
+custom: ["http://www.thinkyhead.com/donate-to-marlin"]

.github/workflows/test-builds.yml

@@ -0,0 +1,103 @@
+#
+# test-builds.yml
+# Do test builds to catch compile errors
+#
+
+name: CI
+
+on:
+  pull_request:
+    branches:
+    - bugfix-2.0.x
+    - dev-2.1.x
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+
+jobs:
+  test_builds:
+
+    runs-on: ubuntu-latest
+
+    strategy:
+      matrix:
+        test-platform:
+        # Base Environments
+
+        - DUE
+        - esp32
+        - linux_native
+        - megaatmega2560
+        - teensy31
+        - teensy35
+
+        # Extended AVR Environments
+
+        - FYSETC_F6_13
+        - megaatmega1280
+        - rambo
+        - sanguino_atmega1284p
+        - sanguino_atmega644p
+
+        # Extended STM32 Environments
+
+        - STM32F103RC_bigtree
+        - STM32F103RC_bigtree_USB
+        - STM32F103RE_bigtree
+        - STM32F103RE_bigtree_USB
+        - STM32F103RC_fysetc
+        - jgaurora_a5s_a1
+        - STM32F103VE_longer
+        - STM32F407VE_black
+        - BIGTREE_SKR_PRO
+        - mks_robin
+        - ARMED
+        - FYSETC_S6
+
+        # Put lengthy tests last
+
+        - LPC1768
+        - LPC1769
+
+        # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
+
+        #- STM32F4
+        #- STM32F7
+
+        # Non-working environment tests
+
+        #- BIGTREE_BTT002
+        #- at90usb1286_cdc
+        #- at90usb1286_dfu
+        #- STM32F103CB_malyan
+        #- mks_robin_lite
+        #- mks_robin_mini
+        #- mks_robin_nano
+        #- SAMD51_grandcentral_m4
+
+    steps:
+
+    - name: Select Python 3.7
+      uses: actions/setup-python@v1
+      with:
+        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
+        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
+
+    - name: Install PlatformIO
+      run: |
+        pip install -U https://github.com/platformio/platformio-core/archive/master.zip
+        platformio update
+
+    - name: Check out the PR
+      uses: actions/checkout@v2
+
+    - name: Run ${{ matrix.test-platform }} Tests
+      run: |
+        # Inline tests script
+        [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
+        chmod +x buildroot/bin/*
+        chmod +x buildroot/share/tests/*
+        export PATH=./buildroot/bin/:./buildroot/share/tests/:${PATH}
+        run_tests . ${{ matrix.test-platform }}