MOM6: +Pass total depths as arguments

src/ALE/MOM_regridding.F90

@@ -880,21 +880,20 @@ subroutine check_remapping_grid( G, GV, h, dzInterface, msg )
 
   !$OMP parallel do default(shared)
   do j = G%jsc-1,G%jec+1 ; do i = G%isc-1,G%iec+1
-    if (G%mask2dT(i,j)>0.) call check_grid_column( GV%ke, GV%Z_to_H*G%bathyT(i,j), h(i,j,:), dzInterface(i,j,:), msg )
+    if (G%mask2dT(i,j)>0.) call check_grid_column( GV%ke, h(i,j,:), dzInterface(i,j,:), msg )
   enddo ; enddo
 
 end subroutine check_remapping_grid
 
 !> Check that the total thickness of new and old grids are consistent
-subroutine check_grid_column( nk, depth, h, dzInterface, msg )
+subroutine check_grid_column( nk, h, dzInterface, msg )
   integer,               intent(in) :: nk !< Number of cells
-  real,                  intent(in) :: depth !< Depth of bottom [Z ~> m] or arbitrary units
   real, dimension(nk),   intent(in) :: h  !< Cell thicknesses [Z ~> m] or arbitrary units
   real, dimension(nk+1), intent(in) :: dzInterface !< Change in interface positions (same units as h)
   character(len=*),      intent(in) :: msg !< Message to append to errors
   ! Local variables
   integer :: k
-  real    :: eps, total_h_old, total_h_new, h_new, z_old, z_new
+  real    :: eps, total_h_old, total_h_new, h_new
 
   eps =1. ; eps = epsilon(eps)
 
@@ -904,13 +903,8 @@ subroutine check_grid_column( nk, depth, h, dzInterface, msg )
     total_h_old = total_h_old + h(k)
   enddo
 
-  ! Integrate upwards for the interfaces consistent with the rest of MOM6
-  z_old = - depth
-  if (depth == 0.) z_old = - total_h_old
   total_h_new = 0.
   do k = nk,1,-1
-    z_old = z_old + h(k) ! Old interface position above layer k
-    z_new = z_old + dzInterface(k) ! New interface position based on dzInterface
     h_new = h(k) + ( dzInterface(k) - dzInterface(k+1) ) ! New thickness
     if (h_new<0.) then
       write(0,*) 'k,h,hnew=',k,h(k),h_new
@@ -1082,7 +1076,7 @@ subroutine filtered_grid_motion( CS, nk, z_old, z_new, dz_g )
 
 end subroutine filtered_grid_motion
 
-!> Builds a z*-ccordinate grid with partial steps (Adcroft and Campin, 2004).
+!> Builds a z*-coordinate grid with partial steps (Adcroft and Campin, 2004).
 !! z* is defined as
 !!   z* = (z-eta)/(H+eta)*H  s.t. z*=0 when z=eta and z*=-H when z=-H .
 subroutine build_zstar_grid( CS, G, GV, h, dzInterface, frac_shelf_h)
@@ -1118,7 +1112,7 @@ subroutine build_zstar_grid( CS, G, GV, h, dzInterface, frac_shelf_h)
         cycle
       endif
 
-      ! Local depth (G%bathyT is positive)
+      ! Local depth (G%bathyT is positive downward)
       nominalDepth = G%bathyT(i,j)*GV%Z_to_H
 
       ! Determine water column thickness
@@ -1319,7 +1313,7 @@ subroutine build_rho_grid( G, GV, US, h, tv, dzInterface, remapCS, CS, frac_shel
       endif
 
 
-      ! Local depth (G%bathyT is positive)
+      ! Local depth (G%bathyT is positive downward)
       nominalDepth = G%bathyT(i,j)*GV%Z_to_H
 
       ! Determine total water column thickness
@@ -1406,7 +1400,7 @@ end subroutine build_rho_grid
 !! density interpolated from the column profile and a clipping of depth for
 !! each interface to a fixed z* or p* grid.  This should probably be (optionally?)
 !! changed to find the nearest location of the target density.
-!! \remark { Based on Bleck, 2002: An oceanice general circulation model framed in
+!! \remark { Based on Bleck, 2002: An ocean-ice general circulation model framed in
 !! hybrid isopycnic-Cartesian coordinates, Ocean Modelling 37, 55-88.
 !! http://dx.doi.org/10.1016/S1463-5003(01)00012-9 }
 subroutine build_grid_HyCOM1( G, GV, US, h, tv, h_new, dzInterface, CS, frac_shelf_h )
@@ -1575,7 +1569,9 @@ subroutine build_grid_SLight(G, GV, US, h, tv, dzInterface, CS)
   real, dimension(SZK_(GV)+1) :: z_col_new ! Interface positions relative to the surface [H ~> m or kg m-2]
   real, dimension(SZK_(GV)+1) :: dz_col  ! The realized change in z_col [H ~> m or kg m-2]
   real, dimension(SZK_(GV))   :: p_col   ! Layer center pressure [R L2 T-2 ~> Pa]
-  real :: depth
+
+  ! Local variables
+  real :: depth   ! Depth of the ocean relative to the mean sea surface height in thickness units [H ~> m or kg m-2]
   integer :: i, j, k, nz
   real :: h_neglect, h_neglect_edge
 
@@ -1631,8 +1627,8 @@ end subroutine build_grid_SLight
 subroutine adjust_interface_motion( CS, nk, h_old, dz_int )
   type(regridding_CS),      intent(in)    :: CS !< Regridding control structure
   integer,                  intent(in)    :: nk !< Number of layers in h_old
-  real, dimension(nk),      intent(in)    :: h_old !< Minium allowed thickness of h [H ~> m or kg m-2]
-  real, dimension(CS%nk+1), intent(inout) :: dz_int !< Minium allowed thickness of h [H ~> m or kg m-2]
+  real, dimension(nk),      intent(in)    :: h_old !< Minimum allowed thickness of h [H ~> m or kg m-2]
+  real, dimension(CS%nk+1), intent(inout) :: dz_int !< Minimum allowed thickness of h [H ~> m or kg m-2]
   ! Local variables
   integer :: k
   real :: h_new, eps, h_total, h_err
@@ -1710,8 +1706,8 @@ subroutine build_grid_arbitrary( G, GV, h, dzInterface, h_new, CS )
   real      :: total_height
   real      :: delta_h
   real      :: max_depth
-  real      :: eta              ! local elevation
-  real      :: local_depth
+  real      :: eta              ! local elevation [H ~> m or kg m-2]
+  real      :: local_depth      ! The local ocean depth relative to mean sea level in thickness units [H ~> m or kg m-2]
   real      :: x1, y1, x2, y2
   real      :: x, t
 
@@ -1769,7 +1765,7 @@ subroutine build_grid_arbitrary( G, GV, h, dzInterface, h_new, CS )
         endif
       enddo
 
-      ! Chnage in interface position
+      ! Change in interface position
       x = 0. ! Left boundary at x=0
       dzInterface(i,j,1) = 0.
       do k = 2,nz
@@ -1797,7 +1793,7 @@ subroutine inflate_vanished_layers_old( CS, G, GV, h )
 ! objective is to make sure all layers are at least as thick as the minimum
 ! thickness allowed for regridding purposes (this parameter is set in the
 ! MOM_input file or defaulted to 1.0e-3). When layers are too thin, they
-! are inflated up to the minmum thickness.
+! are inflated up to the minimum thickness.
 !------------------------------------------------------------------------------
 
   ! Arguments
@@ -1901,7 +1897,7 @@ function uniformResolution(nk,coordMode,maxDepth,rhoLight,rhoHeavy)
   ! Arguments
   integer,          intent(in) :: nk !< Number of cells in source grid
   character(len=*), intent(in) :: coordMode !< A string indicating the coordinate mode.
-                                            !! See the documenttion for regrid_consts
+                                            !! See the documentation for regrid_consts
                                             !! for the recognized values.
   real,             intent(in) :: maxDepth  !< The range of the grid values in some modes
   real,             intent(in) :: rhoLight  !< The minimum value of the grid in RHO mode

src/ALE/regrid_interp.F90

@@ -373,7 +373,7 @@ function get_polynomial_coordinate( N, h, x_g, edge_values, ppoly_coefs, &
   real                        :: grad        ! gradient during N-R iterations [A]
   integer :: i, k, iter  ! loop indices
   integer :: k_found     ! index of target cell
-  character(len=200) :: mesg
+  character(len=320) :: mesg
   logical :: use_2018_answers  ! If true use older, less acccurate expressions.
 
   eps = NR_OFFSET