Cura Start Gcode

[Patpend1973]

I have been working on getting this firmware working right. When I change Cura's starting gcode to what https://github.com/mriscoc/Ender3V2S1/wiki/Slicer-G-code-Scripts has, I slice then import to octoprint. When I start the print I get an error,
Slicer Settings Missing
Some slicer settings were missing from your gcode file. Missing Settings: Retraction Length,Retraction Speed,Deretraction Speed,Z Lift Height,X/Y Travel Speed,Z Travel Speed

What have I screwed up? Thanks in advance.

[mriscoc]

Check your Octoprint plugins.

[Patpend1973]

Bump

[Patpend1973]

I wished that helped but it really doesn't. What am I checking for?

…

On Sat, Sep 2, 2023, 19:52 Miguel Risco-Castillo ***@***.***> wrote: Check your Octoprint plugins. — Reply to this email directly, view it on GitHub <#1065 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOBDMMZ6YGJ7JOH3ETPB65TXYPWIJANCNFSM6AAAAAA4IE2BNE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Patpend1973]

Still looking for some help here. What octo print settings am I checking? I used your github pages octoprint setting suggestions. Also the video that you sent me talks about g29 and p1. I have neither as I do not run a mesh before every print