Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

PM: Closing the MPTCP connection when last subflow is not the initial one and its IP address is removed #133

Closed
matttbe opened this issue Jan 11, 2021 · 1 comment
Closed

PM: Closing the MPTCP connection when last subflow is not the initial one and its IP address is removed #133

matttbe opened this issue Jan 11, 2021 · 1 comment
Labels
enhancement

Comments

@matttbe
Copy link
Member

matttbe commented Jan 11, 2021

Or is it OK to leave it open until it's forced closed by an interface being shut down?
matttbe pushed a commit that referenced this issue Feb 3, 2021
@DaveWysochanskiRH
SUNRPC: Handle 0 length opaque XDR object data properly
e4a7d1f 
When handling an auth_gss downcall, it's possible to get 0-length
opaque object for the acceptor.  In the case of a 0-length XDR
object, make sure simple_get_netobj() fills in dest->data = NULL,
and does not continue to kmemdup() which will set
dest->data = ZERO_SIZE_PTR for the acceptor.

The trace event code can handle NULL but not ZERO_SIZE_PTR for a
string, and so without this patch the rpcgss_context trace event
will crash the kernel as follows:

[  162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010
[  162.898693] #PF: supervisor read access in kernel mode
[  162.900830] #PF: error_code(0x0000) - not-present page
[  162.902940] PGD 0 P4D 0
[  162.904027] Oops: 0000 [#1] SMP PTI
[  162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 #133
[  162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  162.910978] RIP: 0010:strlen+0x0/0x20
[  162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31
[  162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202
[  162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697
[  162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010
[  162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000
[  162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10
[  162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028
[  162.936777] FS:  00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000
[  162.940067] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0
[  162.945300] Call Trace:
[  162.946428]  trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss]
[  162.949308]  ? __kmalloc_track_caller+0x35/0x5a0
[  162.951224]  ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss]
[  162.953484]  gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss]
[  162.955953]  rpc_pipe_write+0x58/0x70 [sunrpc]
[  162.957849]  vfs_write+0xcb/0x2c0
[  162.959264]  ksys_write+0x68/0xe0
[  162.960706]  do_syscall_64+0x33/0x40
[  162.962238]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  162.964346] RIP: 0033:0x7f1e1f1e57df

Signed-off-by: Dave Wysochanski <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
jenkins-tessares pushed a commit that referenced this issue Aug 14, 2023
@pv @Vudentz
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending
7f74563 
LE Create CIS command shall not be sent before all CIS Established
events from its previous invocation have been processed. Currently it is
sent via hci_sync but that only waits for the first event, but there can
be multiple.

Make it wait for all events, and simplify the CIS creation as follows:

Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been
sent for the connection but it is not yet completed.

Make BT_CONNECT state to mean the connection wants Create CIS.

On events after which new Create CIS may need to be sent, send it if
possible and some connections need it. These events are:
hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis,
hci_le_cis_estabilished_evt.

The Create CIS status/completion events shall queue new Create CIS only
if at least one of the connections transitions away from BT_CONNECT, so
that we don't loop if controller is sending bogus events.

This fixes sending multiple CIS Create for the same CIS in the
"ISO AC 6(i) - Success" BlueZ test case:

< HCI Command: LE Create Co.. (0x08|0x0064) plen 9  #129 [hci0]
        Number of CIS: 2
        CIS Handle: 257
        ACL Handle: 42
        CIS Handle: 258
        ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4           #130 [hci0]
      LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
        Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29           #131 [hci0]
      LE Connected Isochronous Stream Established (0x19)
        Status: Success (0x00)
        Connection Handle: 257
        ...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13  #132 [hci0]
        ...
> HCI Event: Command Complete (0x0e) plen 6         #133 [hci0]
      LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
        ...
< HCI Command: LE Create Co.. (0x08|0x0064) plen 5  #134 [hci0]
        Number of CIS: 1
        CIS Handle: 258
        ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4           #135 [hci0]
      LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
        Status: ACL Connection Already Exists (0x0b)
> HCI Event: LE Meta Event (0x3e) plen 29           #136 [hci0]
      LE Connected Isochronous Stream Established (0x19)
        Status: Success (0x00)
        Connection Handle: 258
        ...

Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Signed-off-by: Pauli Virtanen <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
matttbe pushed a commit that referenced this issue Dec 22, 2023
@rostedt
tracing: Fix uaf issue when open the hist or hist_debug file
1cc111b 
KASAN report following issue. The root cause is when opening 'hist'
file of an instance and accessing 'trace_event_file' in hist_show(),
but 'trace_event_file' has been freed due to the instance being removed.
'hist_debug' file has the same problem. To fix it, call
tracing_{open,release}_file_tr() in file_operations callback to have
the ref count and avoid 'trace_event_file' being freed.

  BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278
  Read of size 8 at addr ffff242541e336b8 by task head/190

  CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x98/0xf8
   show_stack+0x1c/0x30
   dump_stack_lvl+0x44/0x58
   print_report+0xf0/0x5a0
   kasan_report+0x80/0xc0
   __asan_report_load8_noabort+0x1c/0x28
   hist_show+0x11e0/0x1278
   seq_read_iter+0x344/0xd78
   seq_read+0x128/0x1c0
   vfs_read+0x198/0x6c8
   ksys_read+0xf4/0x1e0
   __arm64_sys_read+0x70/0xa8
   invoke_syscall+0x70/0x260
   el0_svc_common.constprop.0+0xb0/0x280
   do_el0_svc+0x44/0x60
   el0_svc+0x34/0x68
   el0t_64_sync_handler+0xb8/0xc0
   el0t_64_sync+0x168/0x170

  Allocated by task 188:
   kasan_save_stack+0x28/0x50
   kasan_set_track+0x28/0x38
   kasan_save_alloc_info+0x20/0x30
   __kasan_slab_alloc+0x6c/0x80
   kmem_cache_alloc+0x15c/0x4a8
   trace_create_new_event+0x84/0x348
   __trace_add_new_event+0x18/0x88
   event_trace_add_tracer+0xc4/0x1a0
   trace_array_create_dir+0x6c/0x100
   trace_array_create+0x2e8/0x568
   instance_mkdir+0x48/0x80
   tracefs_syscall_mkdir+0x90/0xe8
   vfs_mkdir+0x3c4/0x610
   do_mkdirat+0x144/0x200
   __arm64_sys_mkdirat+0x8c/0xc0
   invoke_syscall+0x70/0x260
   el0_svc_common.constprop.0+0xb0/0x280
   do_el0_svc+0x44/0x60
   el0_svc+0x34/0x68
   el0t_64_sync_handler+0xb8/0xc0
   el0t_64_sync+0x168/0x170

  Freed by task 191:
   kasan_save_stack+0x28/0x50
   kasan_set_track+0x28/0x38
   kasan_save_free_info+0x34/0x58
   __kasan_slab_free+0xe4/0x158
   kmem_cache_free+0x19c/0x508
   event_file_put+0xa0/0x120
   remove_event_file_dir+0x180/0x320
   event_trace_del_tracer+0xb0/0x180
   __remove_instance+0x224/0x508
   instance_rmdir+0x44/0x78
   tracefs_syscall_rmdir+0xbc/0x140
   vfs_rmdir+0x1cc/0x4c8
   do_rmdir+0x220/0x2b8
   __arm64_sys_unlinkat+0xc0/0x100
   invoke_syscall+0x70/0x260
   el0_svc_common.constprop.0+0xb0/0x280
   do_el0_svc+0x44/0x60
   el0_svc+0x34/0x68
   el0t_64_sync_handler+0xb8/0xc0
   el0t_64_sync+0x168/0x170

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Suggested-by: Steven Rostedt <[email protected]>
Signed-off-by: Zheng Yejian <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
matttbe pushed a commit that referenced this issue Feb 23, 2024
@arndb @gregkh
nvmem: include bit index in cell sysfs file name
e20f378 
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with

[    0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[    0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S                 6.8.0-rc1-arnd-5+ #133
[    0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[    0.605362] Call trace:
[    0.605365]  show_stack+0x18/0x2c
[    0.605374]  dump_stack_lvl+0x60/0x80
[    0.605383]  dump_stack+0x18/0x24
[    0.605388]  sysfs_warn_dup+0x64/0x80
[    0.605395]  sysfs_add_bin_file_mode_ns+0xb0/0xd4
[    0.605402]  internal_create_group+0x268/0x404
[    0.605409]  sysfs_create_groups+0x38/0x94
[    0.605415]  devm_device_add_groups+0x50/0x94
[    0.605572]  nvmem_populate_sysfs_cells+0x180/0x1b0
[    0.605682]  nvmem_register+0x38c/0x470
[    0.605789]  devm_nvmem_register+0x1c/0x6c
[    0.605895]  apple_efuses_probe+0xe4/0x120
[    0.606000]  platform_probe+0xa8/0xd0

As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.

Fixes: 0331c61 ("nvmem: core: Expose cells through sysfs")
Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156
Cc:  <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Rafał Miłecki <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc:  <[email protected]>
Cc: Sven Peter <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Eric Curtin <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
@matttbe
Copy link
Member Author

matttbe commented Mar 28, 2024

Note that when there is no more subflows, the MPTCP connection should closed after a few seconds (linked to net.mptcp.close_timeout sysctl knob).

The PM could eventually close the connection before if it realises it can no longer communicate, but maybe easier to just rely on the timeout, no?

Closing this, we can re-open that later if we have a clear use-case.

@matttbe matttbe closed this as completed Mar 28, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
enhancement
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@matttbe