Add back in poll data init #46
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Norman James <[email protected]>
amboar
pushed a commit
to amboar/linux
that referenced
this pull request
Dec 23, 2016
This patch fixes the lockdep warning below DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at linux-next/kernel/locking/lockdep.c:2876 lockdep_trace_alloc+0xe0/0xf0 Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-11756-g86c5152 openbmc#46 ... Call trace: Exception stack(0xffff8007da837890 to 0xffff8007da8379c0) 7880: ffff8007da834000 0001000000000000 78a0: ffff8007da837a70 ffff0000081111a0 00000000600000c5 000000000000003d 78c0: 9374bc6a7f3c7832 0000000000381878 ffff000009db7ab8 000000000000002f 78e0: ffff00000811aabc ffff000008be2548 ffff8007da837990 ffff00000811adf8 7900: ffff8007da834000 00000000024080c0 00000000000000c0 ffff000009021000 7920: 0000000000000000 0000000000000000 ffff000008c8f7c8 ffff8007da579810 7940: 000000000000002f ffff8007da858000 0000000000000000 0000000000000001 7960: 0000000000000001 0000000000000000 ffff00000811a468 0000000000000002 7980: 656c62617369645f 0000000000038187 00000000000000ee ffff8007da837850 79a0: ffff000009db50c0 ffff000009db569d 0000000000000006 ffff000089db568f [<ffff0000081111a0>] lockdep_trace_alloc+0xe0/0xf0 [<ffff0000081f4950>] __kmalloc_track_caller+0x50/0x250 [<ffff00000857c088>] devres_alloc_node+0x28/0x60 [<ffff0000081220e0>] devm_request_threaded_irq+0x50/0xe0 [<ffff0000087e6220>] pcc_mbox_request_channel+0x110/0x170 [<ffff0000084b2660>] acpi_cppc_processor_probe+0x264/0x414 [<ffff0000084ae9f4>] __acpi_processor_start+0x28/0xa0 [<ffff0000084aeab0>] acpi_processor_start+0x44/0x54 [<ffff00000857897c>] driver_probe_device+0x1fc/0x2b0 [<ffff000008578ae4>] __driver_attach+0xb4/0xc0 [<ffff00000857683c>] bus_for_each_dev+0x5c/0xa0 [<ffff000008578110>] driver_attach+0x20/0x30 [<ffff000008577c20>] bus_add_driver+0x110/0x230 [<ffff000008579320>] driver_register+0x60/0x100 [<ffff000008d478b8>] acpi_processor_driver_init+0x2c/0xb0 [<ffff000008083168>] do_one_initcall+0x38/0x130 [<ffff000008d20d6c>] kernel_init_freeable+0x210/0x2b4 [<ffff000008945d90>] kernel_init+0x10/0x110 [<ffff000008082e80>] ret_from_fork+0x10/0x50 It's because the spinlock inside pcc_mbox_request_channel() is kept too long. This patch releases spinlock before request_irq() and free_irq() to fix this issue as spinlock is only needed to protect the channel data. Signed-off-by: Hoan Tran <[email protected]> Reviewed-by: Prashanth Prakash <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
eddiejames
pushed a commit
to eddiejames/linux
that referenced
this pull request
Aug 27, 2018
If a device gets removed right after having registered a power_supply node, we might enter in a deadlock between the remove call (that has a lock on the parent device) and the deferred register work. Allow the deferred register work to exit without taking the lock when we are in the remove state. Stack trace on a Ubuntu 16.04: [16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds. [16072.109127] Not tainted 4.13.0-41-generic openbmc#46~16.04.1-Ubuntu [16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109132] kworker/u16:2 D 0 1180 2 0x80000000 [16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work [16072.109144] Call Trace: [16072.109152] __schedule+0x3d6/0x8b0 [16072.109155] schedule+0x36/0x80 [16072.109158] schedule_preempt_disabled+0xe/0x10 [16072.109161] __mutex_lock.isra.2+0x2ab/0x4e0 [16072.109166] __mutex_lock_slowpath+0x13/0x20 [16072.109168] ? __mutex_lock_slowpath+0x13/0x20 [16072.109171] mutex_lock+0x2f/0x40 [16072.109174] power_supply_deferred_register_work+0x2b/0x50 [16072.109179] process_one_work+0x15b/0x410 [16072.109182] worker_thread+0x4b/0x460 [16072.109186] kthread+0x10c/0x140 [16072.109189] ? process_one_work+0x410/0x410 [16072.109191] ? kthread_create_on_node+0x70/0x70 [16072.109194] ret_from_fork+0x35/0x40 [16072.109199] INFO: task test:2257 blocked for more than 120 seconds. [16072.109202] Not tainted 4.13.0-41-generic openbmc#46~16.04.1-Ubuntu [16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109206] test D 0 2257 2256 0x00000004 [16072.109208] Call Trace: [16072.109211] __schedule+0x3d6/0x8b0 [16072.109215] schedule+0x36/0x80 [16072.109218] schedule_timeout+0x1f3/0x360 [16072.109221] ? check_preempt_curr+0x5a/0xa0 [16072.109224] ? ttwu_do_wakeup+0x1e/0x150 [16072.109227] wait_for_completion+0xb4/0x140 [16072.109230] ? wait_for_completion+0xb4/0x140 [16072.109233] ? wake_up_q+0x70/0x70 [16072.109236] flush_work+0x129/0x1e0 [16072.109240] ? worker_detach_from_pool+0xb0/0xb0 [16072.109243] __cancel_work_timer+0x10f/0x190 [16072.109247] ? device_del+0x264/0x310 [16072.109250] ? __wake_up+0x44/0x50 [16072.109253] cancel_delayed_work_sync+0x13/0x20 [16072.109257] power_supply_unregister+0x37/0xb0 [16072.109260] devm_power_supply_release+0x11/0x20 [16072.109263] release_nodes+0x110/0x200 [16072.109266] devres_release_group+0x7c/0xb0 [16072.109274] wacom_remove+0xc2/0x110 [wacom] [16072.109279] hid_device_remove+0x6e/0xd0 [hid] [16072.109284] device_release_driver_internal+0x158/0x210 [16072.109288] device_release_driver+0x12/0x20 [16072.109291] bus_remove_device+0xec/0x160 [16072.109293] device_del+0x1de/0x310 [16072.109298] hid_destroy_device+0x27/0x60 [hid] [16072.109303] usbhid_disconnect+0x51/0x70 [usbhid] [16072.109308] usb_unbind_interface+0x77/0x270 [16072.109311] device_release_driver_internal+0x158/0x210 [16072.109315] device_release_driver+0x12/0x20 [16072.109318] usb_driver_release_interface+0x77/0x80 [16072.109321] proc_ioctl+0x20f/0x250 [16072.109325] usbdev_do_ioctl+0x57f/0x1140 [16072.109327] ? __wake_up+0x44/0x50 [16072.109331] usbdev_ioctl+0xe/0x20 [16072.109336] do_vfs_ioctl+0xa4/0x600 [16072.109339] ? vfs_write+0x15a/0x1b0 [16072.109343] SyS_ioctl+0x79/0x90 [16072.109347] entry_SYSCALL_64_fastpath+0x24/0xab [16072.109349] RIP: 0033:0x7f20da807f47 [16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47 [16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009 [16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010 [16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000 [16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000 Reported-and-tested-by: Richard Hughes <[email protected]> Tested-by: Aaron Skomra <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Fixes: 7f1a57f ("power_supply: Fix possible NULL pointer dereference on early uevent") Signed-off-by: Sebastian Reichel <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Oct 4, 2018
[ Upstream commit 3ffa658 ] If a device gets removed right after having registered a power_supply node, we might enter in a deadlock between the remove call (that has a lock on the parent device) and the deferred register work. Allow the deferred register work to exit without taking the lock when we are in the remove state. Stack trace on a Ubuntu 16.04: [16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds. [16072.109127] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109132] kworker/u16:2 D 0 1180 2 0x80000000 [16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work [16072.109144] Call Trace: [16072.109152] __schedule+0x3d6/0x8b0 [16072.109155] schedule+0x36/0x80 [16072.109158] schedule_preempt_disabled+0xe/0x10 [16072.109161] __mutex_lock.isra.2+0x2ab/0x4e0 [16072.109166] __mutex_lock_slowpath+0x13/0x20 [16072.109168] ? __mutex_lock_slowpath+0x13/0x20 [16072.109171] mutex_lock+0x2f/0x40 [16072.109174] power_supply_deferred_register_work+0x2b/0x50 [16072.109179] process_one_work+0x15b/0x410 [16072.109182] worker_thread+0x4b/0x460 [16072.109186] kthread+0x10c/0x140 [16072.109189] ? process_one_work+0x410/0x410 [16072.109191] ? kthread_create_on_node+0x70/0x70 [16072.109194] ret_from_fork+0x35/0x40 [16072.109199] INFO: task test:2257 blocked for more than 120 seconds. [16072.109202] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109206] test D 0 2257 2256 0x00000004 [16072.109208] Call Trace: [16072.109211] __schedule+0x3d6/0x8b0 [16072.109215] schedule+0x36/0x80 [16072.109218] schedule_timeout+0x1f3/0x360 [16072.109221] ? check_preempt_curr+0x5a/0xa0 [16072.109224] ? ttwu_do_wakeup+0x1e/0x150 [16072.109227] wait_for_completion+0xb4/0x140 [16072.109230] ? wait_for_completion+0xb4/0x140 [16072.109233] ? wake_up_q+0x70/0x70 [16072.109236] flush_work+0x129/0x1e0 [16072.109240] ? worker_detach_from_pool+0xb0/0xb0 [16072.109243] __cancel_work_timer+0x10f/0x190 [16072.109247] ? device_del+0x264/0x310 [16072.109250] ? __wake_up+0x44/0x50 [16072.109253] cancel_delayed_work_sync+0x13/0x20 [16072.109257] power_supply_unregister+0x37/0xb0 [16072.109260] devm_power_supply_release+0x11/0x20 [16072.109263] release_nodes+0x110/0x200 [16072.109266] devres_release_group+0x7c/0xb0 [16072.109274] wacom_remove+0xc2/0x110 [wacom] [16072.109279] hid_device_remove+0x6e/0xd0 [hid] [16072.109284] device_release_driver_internal+0x158/0x210 [16072.109288] device_release_driver+0x12/0x20 [16072.109291] bus_remove_device+0xec/0x160 [16072.109293] device_del+0x1de/0x310 [16072.109298] hid_destroy_device+0x27/0x60 [hid] [16072.109303] usbhid_disconnect+0x51/0x70 [usbhid] [16072.109308] usb_unbind_interface+0x77/0x270 [16072.109311] device_release_driver_internal+0x158/0x210 [16072.109315] device_release_driver+0x12/0x20 [16072.109318] usb_driver_release_interface+0x77/0x80 [16072.109321] proc_ioctl+0x20f/0x250 [16072.109325] usbdev_do_ioctl+0x57f/0x1140 [16072.109327] ? __wake_up+0x44/0x50 [16072.109331] usbdev_ioctl+0xe/0x20 [16072.109336] do_vfs_ioctl+0xa4/0x600 [16072.109339] ? vfs_write+0x15a/0x1b0 [16072.109343] SyS_ioctl+0x79/0x90 [16072.109347] entry_SYSCALL_64_fastpath+0x24/0xab [16072.109349] RIP: 0033:0x7f20da807f47 [16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47 [16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009 [16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010 [16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000 [16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000 Reported-and-tested-by: Richard Hughes <[email protected]> Tested-by: Aaron Skomra <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Fixes: 7f1a57f ("power_supply: Fix possible NULL pointer dereference on early uevent") Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Oct 21, 2018
[ Upstream commit d4859d7 ] Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by: Mahesh Bandewar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Mar 4, 2019
commit 90cc55f upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <[email protected]> Signed-off-by: Paweł Chmiel <[email protected]> Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
amboar
pushed a commit
to amboar/linux
that referenced
this pull request
Jun 28, 2019
After commit d4fc506 ("mm: switch s_mem and slab_cache in struct page") page->mapping will be re-used by slab allocations and page->mapping->host will be used in balance_dirty_pages_ratelimited() as an inode member but it's not an inode in fact and leads an oops. [ 159.906493] Unable to handle kernel paging request at virtual address ffff200012d90be8 [ 159.908029] Mem abort info: [ 159.908552] ESR = 0x96000007 [ 159.909138] Exception class = DABT (current EL), IL = 32 bits [ 159.910155] SET = 0, FnV = 0 [ 159.910690] EA = 0, S1PTW = 0 [ 159.911241] Data abort info: [ 159.911846] ISV = 0, ISS = 0x00000007 [ 159.912567] CM = 0, WnR = 0 [ 159.913105] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000042acd000 [ 159.914269] [ffff200012d90be8] pgd=000000043ffff003, pud=000000043fffe003, pmd=000000043fffa003, pte=0000000000000000 [ 159.916280] Internal error: Oops: 96000007 [openbmc#1] SMP [ 159.917195] Dumping ftrace buffer: [ 159.917845] (ftrace buffer empty) [ 159.918521] Modules linked in: uio_dev(OE) [ 159.919276] CPU: 1 PID: 295 Comm: uio_test Tainted: G OE 5.2.0-rc4+ openbmc#46 [ 159.920859] Hardware name: linux,dummy-virt (DT) [ 159.921815] pstate: 60000005 (nZCv daif -PAN -UAO) [ 159.922809] pc : balance_dirty_pages_ratelimited+0x68/0xc38 [ 159.923965] lr : fault_dirty_shared_page.isra.8+0xe4/0x100 [ 159.925134] sp : ffff800368a77ae0 [ 159.925824] x29: ffff800368a77ae0 x28: 1ffff0006d14ce1a [ 159.926906] x27: ffff800368a670d0 x26: ffff800368a67120 [ 159.927985] x25: 1ffff0006d10f5fe x24: ffff200012d90be8 [ 159.929089] x23: ffff200013732000 x22: ffff80036ec03200 [ 159.930172] x21: ffff200012d90bc0 x20: 1fffe400025b217d [ 159.931253] x19: ffff80036ec03200 x18: 0000000000000000 [ 159.932348] x17: 0000000000000000 x16: 0ffffe0000010208 [ 159.933439] x15: 0000000000000000 x14: 0000000000000000 [ 159.934518] x13: 0000000000000000 x12: 0000000000000000 [ 159.935596] x11: 1fffefc001b452c0 x10: ffff0fc001b452c0 [ 159.936697] x9 : dfff200000000000 x8 : dfff200000000001 [ 159.937781] x7 : ffff7e000da29607 x6 : ffff0fc001b452c1 [ 159.938859] x5 : ffff0fc001b452c1 x4 : ffff0fc001b452c1 [ 159.939944] x3 : ffff200010523ad4 x2 : 1fffe400026e659b [ 159.941065] x1 : dfff200000000000 x0 : ffff200013732cd8 [ 159.942205] Call trace: [ 159.942732] balance_dirty_pages_ratelimited+0x68/0xc38 [ 159.943797] fault_dirty_shared_page.isra.8+0xe4/0x100 [ 159.944867] do_fault+0x608/0x1250 [ 159.945571] __handle_mm_fault+0x93c/0xfb8 [ 159.946412] handle_mm_fault+0x1c0/0x360 [ 159.947224] do_page_fault+0x358/0x8d0 [ 159.947993] do_translation_fault+0xf8/0x124 [ 159.948884] do_mem_abort+0x70/0x190 [ 159.949624] el0_da+0x24/0x28 According another commit 5e901d0 ("scsi: qedi: Fix bad pte call trace when iscsiuio is stopped."), using kmalloc also cause other problem. But the documentation about UIO_MEM_LOGICAL allows using kmalloc(), remove and don't allow using kmalloc() in documentation. Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Sep 28, 2020
commit 66a5710 upstream. The crash log as the below: [Thu Aug 20 23:18:14 2020] general protection fault: 0000 [#1] SMP NOPTI [Thu Aug 20 23:18:14 2020] CPU: 152 PID: 1837 Comm: kworker/152:1 Tainted: G OE 5.4.0-42-generic #46~18.04.1-Ubuntu [Thu Aug 20 23:18:14 2020] Hardware name: GIGABYTE G482-Z53-YF/MZ52-G40-00, BIOS R12 05/13/2020 [Thu Aug 20 23:18:14 2020] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [Thu Aug 20 23:18:14 2020] RIP: 0010:evict_process_queues_cpsch+0xc9/0x130 [amdgpu] [Thu Aug 20 23:18:14 2020] Code: 49 8d 4d 10 48 39 c8 75 21 eb 44 83 fa 03 74 36 80 78 72 00 74 0c 83 ab 68 01 00 00 01 41 c6 45 41 00 48 8b 00 48 39 c8 74 25 <80> 78 70 00 c6 40 6d 01 74 ee 8b 50 28 c6 40 70 00 83 ab 60 01 00 [Thu Aug 20 23:18:14 2020] RSP: 0018:ffffb29b52f6fc90 EFLAGS: 00010213 [Thu Aug 20 23:18:14 2020] RAX: 1c884edb0a118914 RBX: ffff8a0d45ff3c00 RCX: ffff8a2d83e41038 [Thu Aug 20 23:18:14 2020] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8a0e2e4178c0 [Thu Aug 20 23:18:14 2020] RBP: ffffb29b52f6fcb0 R08: 0000000000001b64 R09: 0000000000000004 [Thu Aug 20 23:18:14 2020] R10: ffffb29b52f6fb78 R11: 0000000000000001 R12: ffff8a0d45ff3d28 [Thu Aug 20 23:18:14 2020] R13: ffff8a2d83e41028 R14: 0000000000000000 R15: 0000000000000000 [Thu Aug 20 23:18:14 2020] FS: 0000000000000000(0000) GS:ffff8a0e2e400000(0000) knlGS:0000000000000000 [Thu Aug 20 23:18:14 2020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Thu Aug 20 23:18:14 2020] CR2: 000055c783c0e6a8 CR3: 00000034a1284000 CR4: 0000000000340ee0 [Thu Aug 20 23:18:14 2020] Call Trace: [Thu Aug 20 23:18:14 2020] kfd_process_evict_queues+0x43/0xd0 [amdgpu] [Thu Aug 20 23:18:14 2020] kfd_suspend_all_processes+0x60/0xf0 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_suspend.part.7+0x43/0x50 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_pre_reset+0x46/0x60 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_amdkfd_pre_reset+0x1a/0x20 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_device_gpu_recover+0x377/0xf90 [amdgpu] [Thu Aug 20 23:18:14 2020] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [Thu Aug 20 23:18:14 2020] process_one_work+0x20f/0x400 [Thu Aug 20 23:18:14 2020] worker_thread+0x34/0x410 When GPU hang, user process will fail to create a compute queue whose struct object will be freed later, but driver wrongly add this queue to queue list of the proccess. And then kfd_process_evict_queues will access a freed memory, which cause a system crash. v2: The failure to execute_queues should probably not be reported to the caller of create_queue, because the queue was already created. Therefore change to ignore the return value from execute_queues. Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Dennis Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
May 24, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this pull request
May 24, 2021
[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-By: Anton Ivanov <[email protected]> Tested-By: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Jul 16, 2021
commit 7c6986a upstream. In raise_backtrace_ipi() we iterate through the cpumask of CPUs, sending each an IPI asking them to do a backtrace, but we don't wait for the backtrace to happen. We then iterate through the CPU mask again, and if any CPU hasn't done the backtrace and cleared itself from the mask, we print a trace on its behalf, noting that the trace may be "stale". This works well enough when a CPU is not responding, because in that case it doesn't receive the IPI and the sending CPU is left to print the trace. But when all CPUs are responding we are left with a race between the sending and receiving CPUs, if the sending CPU wins the race then it will erroneously print a trace. This leads to spurious "stale" traces from the sending CPU, which can then be interleaved messily with the receiving CPU, note the CPU numbers, eg: [ 1658.929157][ C7] rcu: Stack dump where RCU GP kthread last ran: [ 1658.929223][ C7] Sending NMI from CPU 7 to CPUs 1: [ 1658.929303][ C1] NMI backtrace for cpu 1 [ 1658.929303][ C7] CPU 1 didn't respond to backtrace IPI, inspecting paca. [ 1658.929362][ C1] CPU: 1 PID: 325 Comm: kworker/1:1H Tainted: G W E 5.13.0-rc2+ #46 [ 1658.929405][ C7] irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 325 (kworker/1:1H) [ 1658.929465][ C1] Workqueue: events_highpri test_work_fn [test_lockup] [ 1658.929549][ C7] Back trace of paca->saved_r1 (0xc0000000057fb400) (possibly stale): [ 1658.929592][ C1] NIP: c00000000002cf50 LR: c008000000820178 CTR: c00000000002cfa0 To fix it, change the logic so that the sending CPU waits 5s for the receiving CPU to print its trace. If the receiving CPU prints its trace successfully then the sending CPU just continues, avoiding any spurious "stale" trace. This has the added benefit of allowing all CPUs to print their traces in order and avoids any interleaving of their output. Fixes: 5cc0591 ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()") Cc: [email protected] # v4.18+ Reported-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Jan 14, 2022
[ Upstream commit ffb76a8 ] Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8a ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Dec 14, 2023
[ Upstream commit 5104fdf ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Add back init of poll data variable.
Signed-off-by: Norman James [email protected]