Fix some typos #3

misyltoad · 2018-04-16T20:01:28Z

No description provided.

Djelibeybi · 2018-04-16T20:25:51Z

Unfortunately, as documented in the README, we do not accept pull requests via this GitHub repo.

Orabug: 27719848 The locking order in fuse should be nn->fc->lock then nn->lock, mis-order locking will cause deadlock. The following deadlock was caused. PID 378084 asked lock in wrong order. PID: 378084 TASK: ffff8825421942c0 CPU: 2 COMMAND: "dbfs_client" #0 [ffff88207f846e70] crash_nmi_callback at ffffffff810326c6 #1 [ffff88207f846e80] notifier_call_chain at ffffffff81513115 #2 [ffff88207f846ec0] atomic_notifier_call_chain at ffffffff8151317a #3 [ffff88207f846ed0] notify_die at ffffffff815131ae #4 [ffff88207f846f00] default_do_nmi at ffffffff815106b9 #5 [ffff88207f846f30] do_nmi at ffffffff81510840 #6 [ffff88207f846f50] nmi at ffffffff8150fc10 [exception RIP: __ticket_spin_lock+25] RIP: ffffffff81040fe9 RSP: ffff8801f6d3b8e8 RFLAGS: 00000297 RAX: 00000000000068f8 RBX: 0000000000021000 RCX: ffff881fbd8e2d50 RDX: 00000000000068f7 RSI: ffff8801f6d3ba78 RDI: ffff883127828000 RBP: ffff8801f6d3b8e8 R8: ffff8801f6d3ba20 R9: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: ffff883127828000 R13: ffff8801f6d3ba78 R14: ffff881fbd8e2cc4 R15: ffff881fbd8e2cc0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #7 [ffff8801f6d3b8e8] __ticket_spin_lock at ffffffff81040fe9 #8 [ffff8801f6d3b8f0] _raw_spin_lock at ffffffff8150f16e #9 [ffff8801f6d3b900] fuse_get_unique at ffffffffa00fe2ce [fuse] #10 [ffff8801f6d3b920] fuse_read_batch_forget at ffffffffa00fe820 [fuse] #11 [ffff8801f6d3b9a0] fuse_dev_do_read at ffffffffa010052c [fuse] #12 [ffff8801f6d3ba70] fuse_dev_read at ffffffffa0100984 [fuse] #13 [ffff8801f6d3baf0] do_sync_read at ffffffff8116da52 #14 [ffff8801f6d3bc00] vfs_read at ffffffff8116e195 #15 [ffff8801f6d3bc30] sys_read at ffffffff8116e361 #16 [ffff8801f6d3bc80] _read_orig at ffffffffa05f411d [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #17 [ffff8801f6d3bce0] syscall_wrappers_generic_flow_with_param at ffffffffa05f0cc6 [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #18 [ffff8801f6d3bdb0] syscall_wrappers_generic_read.clone.2 at ffffffffa05f136b [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #19 [ffff8801f6d3bee0] SYS_read_common_wrap at ffffffffa05f6085 [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #20 [ffff8801f6d3bf70] SYS_read_wrap64 at ffffffffa05f617e [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #21 [ffff8801f6d3bf80] system_call_fastpath at ffffffff81517622 RIP: 00007f1492a3282d RSP: 00007f148a5f1448 RFLAGS: 00010206 RAX: 0000000000000000 RBX: ffffffff81517622 RCX: 00007f12de0cafd0 RDX: 0000000000021000 RSI: 00007f11e3938550 RDI: 0000000000000004 RBP: 00000000023f1110 R8: 00007ffce2baab50 R9: 000000000005c4e4 R10: 0000000000000024 R11: 0000000000000293 R12: ffffffffa05f617e R13: ffff8801f6d3bf78 R14: 00007f148a5f1e58 R15: 0000000000021000 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b PID: 38445 TASK: ffff881072a1c600 CPU: 19 COMMAND: "ggcmd" #0 [ffff88407f026e70] crash_nmi_callback at ffffffff810326c6 #1 [ffff88407f026e80] notifier_call_chain at ffffffff81513115 #2 [ffff88407f026ec0] atomic_notifier_call_chain at ffffffff8151317a #3 [ffff88407f026ed0] notify_die at ffffffff815131ae #4 [ffff88407f026f00] default_do_nmi at ffffffff815106b9 #5 [ffff88407f026f30] do_nmi at ffffffff81510840 #6 [ffff88407f026f50] nmi at ffffffff8150fc10 [exception RIP: __ticket_spin_lock+28] RIP: ffffffff81040fec RSP: ffff881070b8fb48 RFLAGS: 00000297 RAX: 000000000000a41c RBX: ffff881fbd8e2cc4 RCX: 0000000000051000 RDX: 000000000000a41b RSI: ffff8811edefac50 RDI: ffff881fbd8e2cc4 RBP: ffff881070b8fb48 R8: ffff8811edefac58 R9: 0000000000000003 R10: ffff88407ffd8e00 R11: 000000000000007d R12: ffff881fbd8e2cc0 R13: ffff8811edefac50 R14: ffff8811edefac58 R15: ffff8811edefac50 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #7 [ffff881070b8fb48] __ticket_spin_lock at ffffffff81040fec #8 [ffff881070b8fb50] _raw_spin_lock at ffffffff8150f16e #9 [ffff881070b8fb60] fuse_request_send_background_locked at ffffffffa00ffa97 [fuse] #10 [ffff881070b8fb90] fuse_send_writepage at ffffffffa0108301 [fuse] #11 [ffff881070b8fbc0] fuse_flush_writepages at ffffffffa01083f3 [fuse] #12 [ffff881070b8fc00] fuse_writepage_locked at ffffffffa0108683 [fuse] #13 [ffff881070b8fc60] fuse_writepage at ffffffffa010875e [fuse] #14 [ffff881070b8fc80] __writepage at ffffffff8111a8a7 #15 [ffff881070b8fca0] write_cache_pages at ffffffff8111bc06 #16 [ffff881070b8fdd0] generic_writepages at ffffffff8111bf31 #17 [ffff881070b8fe30] do_writepages at ffffffff8111bf95 #18 [ffff881070b8fe40] __filemap_fdatawrite_range at ffffffff8111166b #19 [ffff881070b8fe90] filemap_fdatawrite at ffffffff8111193f #20 [ffff881070b8fea0] filemap_write_and_wait at ffffffff81111985 #21 [ffff881070b8fec0] fuse_vma_close at ffffffffa010662c [fuse] #22 [ffff881070b8fed0] remove_vma at ffffffff8113c8b3 #23 [ffff881070b8fef0] do_munmap at ffffffff8113e8cf #24 [ffff881070b8ff50] sys_munmap at ffffffff8113e9e6 #25 [ffff881070b8ff80] system_call_fastpath at ffffffff81517622 RIP: 00007f3ed5cc84b7 RSP: 00007f3ed5100950 RFLAGS: 00000216 RAX: 000000000000000b RBX: ffffffff81517622 RCX: 0000000000140070 RDX: 0000000000000000 RSI: 00000000002fe000 RDI: 00007f3ed4abc000 RBP: 00007f3ed4abc1d8 R8: 00000000ffffffff R9: ffffffffffffc4f9 R10: 00000000000ce02f R11: 0000000000000246 R12: 00007f3ed4abc000 R13: 0000000000000000 R14: 00007f3ecc20d950 R15: 00007f3ecc007620 ORIG_RAX: 000000000000000b CS: 0033 SS: 002b OFF-MAINLINE/UEK5: nn->lock was introduced by oracle special fuse numa aware patches. OFF-UEK4: New lock fc->seq_lock was introduced, fc->lock not used in fuse_get_unique(). Signed-off-by: Junxiao Bi <[email protected]> Reviewed-by: Ashish Samant <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Orabug: 27241654 Signed-off-by: Guanglei Li <[email protected]> Signed-off-by: Honglei Wang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Yanjun Zhu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit 2c0aa08) Reviewed-by: Håkon Bugge <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Orabug: 27760268 The locking order in fuse should be nn->fc->lock then nn->lock, mis-order locking will cause deadlock. The following deadlock was caused. PID 378084 asked lock in wrong order. PID: 378084 TASK: ffff8825421942c0 CPU: 2 COMMAND: "dbfs_client" #0 [ffff88207f846e70] crash_nmi_callback at ffffffff810326c6 #1 [ffff88207f846e80] notifier_call_chain at ffffffff81513115 #2 [ffff88207f846ec0] atomic_notifier_call_chain at ffffffff8151317a #3 [ffff88207f846ed0] notify_die at ffffffff815131ae #4 [ffff88207f846f00] default_do_nmi at ffffffff815106b9 #5 [ffff88207f846f30] do_nmi at ffffffff81510840 #6 [ffff88207f846f50] nmi at ffffffff8150fc10 [exception RIP: __ticket_spin_lock+25] RIP: ffffffff81040fe9 RSP: ffff8801f6d3b8e8 RFLAGS: 00000297 RAX: 00000000000068f8 RBX: 0000000000021000 RCX: ffff881fbd8e2d50 RDX: 00000000000068f7 RSI: ffff8801f6d3ba78 RDI: ffff883127828000 RBP: ffff8801f6d3b8e8 R8: ffff8801f6d3ba20 R9: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: ffff883127828000 R13: ffff8801f6d3ba78 R14: ffff881fbd8e2cc4 R15: ffff881fbd8e2cc0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #7 [ffff8801f6d3b8e8] __ticket_spin_lock at ffffffff81040fe9 #8 [ffff8801f6d3b8f0] _raw_spin_lock at ffffffff8150f16e #9 [ffff8801f6d3b900] fuse_get_unique at ffffffffa00fe2ce [fuse] #10 [ffff8801f6d3b920] fuse_read_batch_forget at ffffffffa00fe820 [fuse] #11 [ffff8801f6d3b9a0] fuse_dev_do_read at ffffffffa010052c [fuse] #12 [ffff8801f6d3ba70] fuse_dev_read at ffffffffa0100984 [fuse] #13 [ffff8801f6d3baf0] do_sync_read at ffffffff8116da52 #14 [ffff8801f6d3bc00] vfs_read at ffffffff8116e195 #15 [ffff8801f6d3bc30] sys_read at ffffffff8116e361 #16 [ffff8801f6d3bc80] _read_orig at ffffffffa05f411d [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #17 [ffff8801f6d3bce0] syscall_wrappers_generic_flow_with_param at ffffffffa05f0cc6 [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #18 [ffff8801f6d3bdb0] syscall_wrappers_generic_read.clone.2 at ffffffffa05f136b [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #19 [ffff8801f6d3bee0] SYS_read_common_wrap at ffffffffa05f6085 [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #20 [ffff8801f6d3bf70] SYS_read_wrap64 at ffffffffa05f617e [krg_10_5_0_3021_impOEL6-UEK4-smp-x86_64] #21 [ffff8801f6d3bf80] system_call_fastpath at ffffffff81517622 RIP: 00007f1492a3282d RSP: 00007f148a5f1448 RFLAGS: 00010206 RAX: 0000000000000000 RBX: ffffffff81517622 RCX: 00007f12de0cafd0 RDX: 0000000000021000 RSI: 00007f11e3938550 RDI: 0000000000000004 RBP: 00000000023f1110 R8: 00007ffce2baab50 R9: 000000000005c4e4 R10: 0000000000000024 R11: 0000000000000293 R12: ffffffffa05f617e R13: ffff8801f6d3bf78 R14: 00007f148a5f1e58 R15: 0000000000021000 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b PID: 38445 TASK: ffff881072a1c600 CPU: 19 COMMAND: "ggcmd" #0 [ffff88407f026e70] crash_nmi_callback at ffffffff810326c6 #1 [ffff88407f026e80] notifier_call_chain at ffffffff81513115 #2 [ffff88407f026ec0] atomic_notifier_call_chain at ffffffff8151317a #3 [ffff88407f026ed0] notify_die at ffffffff815131ae #4 [ffff88407f026f00] default_do_nmi at ffffffff815106b9 #5 [ffff88407f026f30] do_nmi at ffffffff81510840 #6 [ffff88407f026f50] nmi at ffffffff8150fc10 [exception RIP: __ticket_spin_lock+28] RIP: ffffffff81040fec RSP: ffff881070b8fb48 RFLAGS: 00000297 RAX: 000000000000a41c RBX: ffff881fbd8e2cc4 RCX: 0000000000051000 RDX: 000000000000a41b RSI: ffff8811edefac50 RDI: ffff881fbd8e2cc4 RBP: ffff881070b8fb48 R8: ffff8811edefac58 R9: 0000000000000003 R10: ffff88407ffd8e00 R11: 000000000000007d R12: ffff881fbd8e2cc0 R13: ffff8811edefac50 R14: ffff8811edefac58 R15: ffff8811edefac50 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #7 [ffff881070b8fb48] __ticket_spin_lock at ffffffff81040fec #8 [ffff881070b8fb50] _raw_spin_lock at ffffffff8150f16e #9 [ffff881070b8fb60] fuse_request_send_background_locked at ffffffffa00ffa97 [fuse] #10 [ffff881070b8fb90] fuse_send_writepage at ffffffffa0108301 [fuse] #11 [ffff881070b8fbc0] fuse_flush_writepages at ffffffffa01083f3 [fuse] #12 [ffff881070b8fc00] fuse_writepage_locked at ffffffffa0108683 [fuse] #13 [ffff881070b8fc60] fuse_writepage at ffffffffa010875e [fuse] #14 [ffff881070b8fc80] __writepage at ffffffff8111a8a7 #15 [ffff881070b8fca0] write_cache_pages at ffffffff8111bc06 #16 [ffff881070b8fdd0] generic_writepages at ffffffff8111bf31 #17 [ffff881070b8fe30] do_writepages at ffffffff8111bf95 #18 [ffff881070b8fe40] __filemap_fdatawrite_range at ffffffff8111166b #19 [ffff881070b8fe90] filemap_fdatawrite at ffffffff8111193f #20 [ffff881070b8fea0] filemap_write_and_wait at ffffffff81111985 #21 [ffff881070b8fec0] fuse_vma_close at ffffffffa010662c [fuse] #22 [ffff881070b8fed0] remove_vma at ffffffff8113c8b3 #23 [ffff881070b8fef0] do_munmap at ffffffff8113e8cf #24 [ffff881070b8ff50] sys_munmap at ffffffff8113e9e6 #25 [ffff881070b8ff80] system_call_fastpath at ffffffff81517622 RIP: 00007f3ed5cc84b7 RSP: 00007f3ed5100950 RFLAGS: 00000216 RAX: 000000000000000b RBX: ffffffff81517622 RCX: 0000000000140070 RDX: 0000000000000000 RSI: 00000000002fe000 RDI: 00007f3ed4abc000 RBP: 00007f3ed4abc1d8 R8: 00000000ffffffff R9: ffffffffffffc4f9 R10: 00000000000ce02f R11: 0000000000000246 R12: 00007f3ed4abc000 R13: 0000000000000000 R14: 00007f3ecc20d950 R15: 00007f3ecc007620 ORIG_RAX: 000000000000000b CS: 0033 SS: 002b OFF-MAINLINE/UEK5: nn->lock was introduced by oracle special fuse numa aware patches. OFF-UEK4: New lock fc->seq_lock was introduced, fc->lock not used in fuse_get_unique(). Signed-off-by: Junxiao Bi <[email protected]> Signed-off-by: Brian Maly <[email protected]>

[ Upstream commit 2c0aa08 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <[email protected]> Signed-off-by: Honglei Wang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Yanjun Zhu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5c64576 upstream. syzkaller reports for wrong rtnl_lock usage in sync code [1] and [2] We have 2 problems in start_sync_thread if error path is taken, eg. on memory allocation error or failure to configure sockets for mcast group or addr/port binding: 1. recursive locking: holding rtnl_lock while calling sock_release which in turn calls again rtnl_lock in ip_mc_drop_socket to leave the mcast group, as noticed by Florian Westphal. Additionally, sock_release can not be called while holding sync_mutex (ABBA deadlock). 2. task hung: holding rtnl_lock while calling kthread_stop to stop the running kthreads. As the kthreads do the same to leave the mcast group (sock_release -> ip_mc_drop_socket -> rtnl_lock) they hang. Fix the problems by calling rtnl_unlock early in the error path, now sock_release is called after unlocking both mutexes. Problem 3 (task hung reported by syzkaller [2]) is variant of problem 2: use _trylock to prevent one user to call rtnl_lock and then while waiting for sync_mutex to block kthreads that execute sock_release when they are stopped by stop_sync_thread. [1] IPVS: stopping backup sync thread 4500 ... WARNING: possible recursive locking detected 4.16.0-rc7+ #3 Not tainted -------------------------------------------- syzkaller688027/4497 is trying to acquire lock: (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 but task is already holding lock: IPVS: stopping backup sync thread 4495 ... (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtnl_mutex); lock(rtnl_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by syzkaller688027/4497: #0: (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (ipvs->sync_mutex){+.+.}, at: [<00000000703f78e3>] do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388 stack backtrace: CPU: 1 PID: 4497 Comm: syzkaller688027 Not tainted 4.16.0-rc7+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_deadlock_bug kernel/locking/lockdep.c:1761 [inline] check_deadlock kernel/locking/lockdep.c:1805 [inline] validate_chain kernel/locking/lockdep.c:2401 [inline] __lock_acquire+0xe8f/0x3e00 kernel/locking/lockdep.c:3431 lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 ip_mc_drop_socket+0x88/0x230 net/ipv4/igmp.c:2643 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:413 sock_release+0x8d/0x1e0 net/socket.c:595 start_sync_thread+0x2213/0x2b70 net/netfilter/ipvs/ip_vs_sync.c:1924 do_ip_vs_set_ctl+0x1139/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2389 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1261 udp_setsockopt+0x45/0x80 net/ipv4/udp.c:2406 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2975 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x446a69 RSP: 002b:00007fa1c3a64da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000446a69 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006e29fc R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 00000000006e29f8 R13: 00676e697279656b R14: 00007fa1c3a659c0 R15: 00000000006e2b60 [2] IPVS: sync thread started: state = BACKUP, mcast_ifn = syz_tun, syncid = 4, id = 0 IPVS: stopping backup sync thread 25415 ... INFO: task syz-executor7:25421 blocked for more than 120 seconds. Not tainted 4.16.0-rc6+ #284 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D23688 25421 4408 0x00000004 Call Trace: context_switch kernel/sched/core.c:2862 [inline] __schedule+0x8fb/0x1ec0 kernel/sched/core.c:3440 schedule+0xf5/0x430 kernel/sched/core.c:3499 schedule_timeout+0x1a3/0x230 kernel/time/timer.c:1777 do_wait_for_common kernel/sched/completion.c:86 [inline] __wait_for_common kernel/sched/completion.c:107 [inline] wait_for_common kernel/sched/completion.c:118 [inline] wait_for_completion+0x415/0x770 kernel/sched/completion.c:139 kthread_stop+0x14a/0x7a0 kernel/kthread.c:530 stop_sync_thread+0x3d9/0x740 net/netfilter/ipvs/ip_vs_sync.c:1996 do_ip_vs_set_ctl+0x2b1/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2394 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1253 sctp_setsockopt+0x2ca/0x63e0 net/sctp/socket.c:4154 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:3039 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454889 RSP: 002b:00007fc927626c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fc9276276d4 RCX: 0000000000454889 RDX: 000000000000048c RSI: 0000000000000000 RDI: 0000000000000017 RBP: 000000000072bf58 R08: 0000000000000018 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000051c R14: 00000000006f9b40 R15: 0000000000000001 Showing all locks held in the system: 2 locks held by khungtaskd/868: #0: (rcu_read_lock){....}, at: [<00000000a1a8f002>] check_hung_uninterruptible_tasks kernel/hung_task.c:175 [inline] #0: (rcu_read_lock){....}, at: [<00000000a1a8f002>] watchdog+0x1c5/0xd60 kernel/hung_task.c:249 #1: (tasklist_lock){.+.+}, at: [<0000000037c2f8f9>] debug_show_all_locks+0xd3/0x3d0 kernel/locking/lockdep.c:4470 1 lock held by rsyslogd/4247: #0: (&f->f_pos_lock){+.+.}, at: [<000000000d8d6983>] __fdget_pos+0x12b/0x190 fs/file.c:765 2 locks held by getty/4338: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4339: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4340: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4341: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4342: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4343: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4344: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 3 locks held by kworker/0:5/6494: #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] work_static include/linux/workqueue.h:198 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] set_work_data kernel/workqueue.c:619 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] process_one_work+0xb12/0x1bb0 kernel/workqueue.c:2084 #1: ((addr_chk_work).work){+.+.}, at: [<00000000278427d5>] process_one_work+0xb89/0x1bb0 kernel/workqueue.c:2088 #2: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 1 lock held by syz-executor7/25421: #0: (ipvs->sync_mutex){+.+.}, at: [<00000000d414a689>] do_ip_vs_set_ctl+0x277/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2393 2 locks held by syz-executor7/25427: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (ipvs->sync_mutex){+.+.}, at: [<00000000e6d48489>] do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388 1 lock held by syz-executor7/25435: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 1 lock held by ipvs-b:2:0/25415: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Fixes: e0b26cc ("ipvs: call rtnl_lock early") Signed-off-by: Julian Anastasov <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Cc: Zubin Mithra <[email protected]> Cc: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 352672d upstream. Currently; we're grabbing all of the modesetting locks before adding MST connectors to fbdev. This isn't actually necessary, and causes a deadlock as well: ====================================================== WARNING: possible circular locking dependency detected 4.17.0-rc3Lyude-Test+ #1 Tainted: G O ------------------------------------------------------ kworker/1:0/18 is trying to acquire lock: 00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] but task is already holding lock: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (crtc_ww_class_mutex){+.+.}: ww_mutex_lock+0x43/0x80 drm_modeset_lock+0x71/0x130 [drm] drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (crtc_ww_class_acquire){+.+.}: drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dev->mode_config.mutex){+.+.}: drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&helper->lock){+.+.}: __mutex_lock+0x70/0x9d0 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(crtc_ww_class_mutex); lock(crtc_ww_class_acquire); lock(crtc_ww_class_mutex); lock(&helper->lock); *** DEADLOCK *** 5 locks held by kworker/1:0/18: #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm] #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm] #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] stack backtrace: CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G O 4.17.0-rc3Lyude-Test+ #1 Hardware name: Gateway FX6840/FX6840, BIOS P01-A3 05/17/2010 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.38+0x1ce/0x1db __lock_acquire+0x128f/0x1350 ? lock_acquire+0x9f/0x200 ? lock_acquire+0x9f/0x200 ? __ww_mutex_lock.constprop.13+0x8f/0x1000 lock_acquire+0x9f/0x200 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] __mutex_lock+0x70/0x9d0 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? ww_mutex_lock+0x43/0x80 ? _cond_resched+0x15/0x30 ? ww_mutex_lock+0x43/0x80 ? drm_modeset_lock+0xb2/0x130 [drm] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] ? mark_held_locks+0x50/0x80 ? kfree+0xcf/0x2a0 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] ? trace_hardirqs_on_caller+0xed/0x180 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau] ? find_held_lock+0x2d/0x90 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] ? __mutex_unlock_slowpath+0x3b/0x280 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 ? process_one_work+0x650/0x650 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x50/0x50 ret_from_fork+0x3a/0x50 Taking example from i915, the only time we need to hold any modesetting locks is when changing the port on the mstc, and in that case we only need to hold the connection mutex. Signed-off-by: Lyude Paul <[email protected]> Cc: Karol Herbst <[email protected]> Cc: [email protected] Signed-off-by: Lyude Paul <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…s found [ Upstream commit 72f17ba ] If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one. However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes. For example, given this sequence: 1 OVS_KEY_ATTR_PRIORITY 2 OVS_KEY_ATTR_TUNNEL 3 OVS_TUNNEL_KEY_ATTR_ID 4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC 5 OVS_TUNNEL_KEY_ATTR_IPV4_DST 6 OVS_TUNNEL_KEY_ATTR_TTL 7 OVS_TUNNEL_KEY_ATTR_TP_SRC 8 OVS_TUNNEL_KEY_ATTR_TP_DST 9 OVS_KEY_ATTR_IN_PORT 10 OVS_KEY_ATTR_SKB_MARK 11 OVS_KEY_ATTR_MPLS we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table: [ 7654.586496] ================================================================== [ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch] [ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430 [ 7654.610983] [ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1 [ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 7654.631379] Call Trace: [ 7654.634108] [<ffffffffb65a7c50>] dump_stack+0x19/0x1b [ 7654.639843] [<ffffffffb53ff373>] print_address_description+0x33/0x290 [ 7654.647129] [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch] [ 7654.654607] [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330 [ 7654.661406] [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40 [ 7654.668789] [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch] [ 7654.676076] [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch] [ 7654.684234] [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40 [ 7654.689968] [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590 [ 7654.696574] [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch] [ 7654.705122] [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0 [ 7654.712503] [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21 [ 7654.719401] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.726298] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.733195] [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50 [ 7654.740187] [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0 [ 7654.746406] [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20 [ 7654.752914] [<ffffffffb53fe711>] ? memset+0x31/0x40 [ 7654.758456] [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch] [snip] [ 7655.132484] The buggy address belongs to the variable: [ 7655.138226] ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch] [ 7655.145507] [ 7655.147166] Memory state around the buggy address: [ 7655.152514] ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa [ 7655.160585] ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa [ 7655.176701] ^ [ 7655.184372] ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05 [ 7655.192431] ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.200490] ================================================================== Reported-by: Hangbin Liu <[email protected]> Fixes: 982b527 ("openvswitch: Fix mask generation for nested attributes.") Signed-off-by: Stefano Brivio <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit af50e4b ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Benc <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ad46e48 ] Currently we can crash perf record when running in pipe mode, like: $ perf record ls | perf report # To display the perf.data header info, please use --header/--header-only options. # perf: Segmentation fault Error: The - file has no samples! The callstack of the crash is: 0x0000000000515242 in perf_event__synthesize_event_update_name 3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]); (gdb) bt #0 0x0000000000515242 in perf_event__synthesize_event_update_name #1 0x00000000005158a4 in perf_event__synthesize_extra_attr #2 0x0000000000443347 in record__synthesize #3 0x00000000004438e3 in __cmd_record #4 0x000000000044514e in cmd_record #5 0x00000000004cbc95 in run_builtin #6 0x00000000004cbf02 in handle_internal_command #7 0x00000000004cc054 in run_argv #8 0x00000000004cc422 in main The reason of the crash is that the evsel does not have ids array allocated and the pipe's synthesize code tries to access it. We don't force evsel ids allocation when we have single event, because it's not needed. However we need it when we are in pipe mode even for single event as a key for evsel update event. Fixing this by forcing evsel ids allocation event for single event, when we are in pipe mode. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit fca3234 ] Executing command 'perf stat -T -- ls' dumps core on x86 and s390. Here is the call back chain (done on x86): # gdb ./perf .... (gdb) r stat -T -- ls ... Program received signal SIGSEGV, Segmentation fault. 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6 (gdb) where #0 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6 #1 0x00007ffff56ae484 in asprintf () from /lib64/libc.so.6 #2 0x00000000004f1982 in __parse_events_add_pmu (parse_state=0x7fffffffd580, list=0xbfb970, name=0xbf3ef0 "cpu", head_config=0xbfb930, auto_merge_stats=false) at util/parse-events.c:1233 #3 0x00000000004f1c8e in parse_events_add_pmu (parse_state=0x7fffffffd580, list=0xbfb970, name=0xbf3ef0 "cpu", head_config=0xbfb930) at util/parse-events.c:1288 #4 0x0000000000537ce3 in parse_events_parse (_parse_state=0x7fffffffd580, scanner=0xbf4210) at util/parse-events.y:234 #5 0x00000000004f2c7a in parse_events__scanner (str=0x6b66c0 "task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", parse_state=0x7fffffffd580, start_token=258) at util/parse-events.c:1673 #6 0x00000000004f2e23 in parse_events (evlist=0xbe9990, str=0x6b66c0 "task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", err=0x0) at util/parse-events.c:1713 #7 0x000000000044e137 in add_default_attributes () at builtin-stat.c:2281 #8 0x000000000044f7b5 in cmd_stat (argc=1, argv=0x7fffffffe3b0) at builtin-stat.c:2828 #9 0x00000000004c8b0f in run_builtin (p=0xab01a0 <commands+288>, argc=4, argv=0x7fffffffe3b0) at perf.c:297 #10 0x00000000004c8d7c in handle_internal_command (argc=4, argv=0x7fffffffe3b0) at perf.c:349 #11 0x00000000004c8ece in run_argv (argcp=0x7fffffffe20c, argv=0x7fffffffe200) at perf.c:393 #12 0x00000000004c929c in main (argc=4, argv=0x7fffffffe3b0) at perf.c:537 (gdb) It turns out that a NULL pointer is referenced. Here are the function calls: ... cmd_stat() +---> add_default_attributes() +---> parse_events(evsel_list, transaction_attrs, NULL); 3rd parameter set to NULL Function parse_events(xx, xx, struct parse_events_error *err) dives into a bison generated scanner and creates parser state information for it first: struct parse_events_state parse_state = { .list = LIST_HEAD_INIT(parse_state.list), .idx = evlist->nr_entries, .error = err, <--- NULL POINTER !!! .evlist = evlist, }; Now various functions inside the bison scanner are called to end up in __parse_events_add_pmu(struct parse_events_state *parse_state, ..) with first parameter being a pointer to above structure definition. Now the PMU event name is not found (because being executed in a VM) and this function tries to create an error message with asprintf(&parse_state->error.str, ....) which references a NULL pointer and dumps core. Fix this by providing a pointer to the necessary error information instead of NULL. Technically only the else part is needed to avoid the core dump, just lets be safe... Signed-off-by: Thomas Richter <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit d546b67 ] spin_lock/unlock was used instead of spin_un/lock_irq in a procedure used in process space, on a spinlock which can be grabbed in an interrupt. This caused the stack trace below to be displayed (on kernel 4.17.0-rc1 compiled with Lock Debugging enabled): [ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I [ 154.675856] ----------------------------------------------------- [ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core] [ 154.700927] and this task is already holding: [ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib] [ 154.718028] which would create a new lock dependency: [ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.} [ 154.731922] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 154.740798] (&(&cq->lock)->rlock){..-.} [ 154.740800] ... which became SOFTIRQ-irq-safe at: [ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50 [ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib] [ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib] ... to a SOFTIRQ-irq-unsafe lock: [ 154.815603] (&(&qp_table->lock)->rlock){+.+.} [ 154.815604] ... which became SOFTIRQ-irq-unsafe at: [ 154.827718] ... [ 154.827720] _raw_spin_lock+0x35/0x50 [ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core] [ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core] Since mlx4_qp_lookup() is called only in process space, we can simply replace the spin_un/lock calls with spin_un/lock_irq calls. Fixes: 6dc06c0 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 31286a8 upstream. Recently the following BUG was reported: Injecting memory failure for pfn 0x3c0000 at process virtual address 0x7fe300000000 Memory failure: 0x3c0000: recovery action for huge page: Recovered BUG: unable to handle kernel paging request at ffff8dfcc0003000 IP: gup_pgd_range+0x1f0/0xc20 PGD 17ae72067 P4D 17ae72067 PUD 0 Oops: 0000 [#1] SMP PTI ... CPU: 3 PID: 5467 Comm: hugetlb_1gb Not tainted 4.15.0-rc8-mm1-abc+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 You can easily reproduce this by calling madvise(MADV_HWPOISON) twice on a 1GB hugepage. This happens because get_user_pages_fast() is not aware of a migration entry on pud that was created in the 1st madvise() event. I think that conversion to pud-aligned migration entry is working, but other MM code walking over page table isn't prepared for it. We need some time and effort to make all this work properly, so this patch avoids the reported bug by just disabling error handling for 1GB hugepage. [[email protected]: v2] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Naoya Horiguchi <[email protected]> Acked-by: Michal Hocko <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Reviewed-by: Mike Kravetz <[email protected]> Acked-by: Punit Agrawal <[email protected]> Tested-by: Michael Ellerman <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 4f4616c ] Similar to what we do when we remove a PCI function, set the QEDF_UNLOADING flag to prevent any requests from being queued while a vport is being deleted. This prevents any requests from getting stuck in limbo when the vport is unloaded or deleted. Fixes the crash: PID: 106676 TASK: ffff9a436aa90000 CPU: 12 COMMAND: "multipathd" #0 [ffff9a43567d3550] machine_kexec+522 at ffffffffaca60b2a #1 [ffff9a43567d35b0] __crash_kexec+114 at ffffffffacb13512 #2 [ffff9a43567d3680] crash_kexec+48 at ffffffffacb13600 #3 [ffff9a43567d3698] oops_end+168 at ffffffffad117768 #4 [ffff9a43567d36c0] no_context+645 at ffffffffad106f52 #5 [ffff9a43567d3710] __bad_area_nosemaphore+116 at ffffffffad106fe9 #6 [ffff9a43567d3760] bad_area+70 at ffffffffad107379 #7 [ffff9a43567d3788] __do_page_fault+1247 at ffffffffad11a8cf #8 [ffff9a43567d37f0] do_page_fault+53 at ffffffffad11a915 #9 [ffff9a43567d3820] page_fault+40 at ffffffffad116768 [exception RIP: qedf_init_task+61] RIP: ffffffffc0e13c2d RSP: ffff9a43567d38d0 RFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffbe920472c738 RCX: ffff9a434fa0e3e8 RDX: ffff9a434f695280 RSI: ffffbe920472c738 RDI: ffff9a43aa359c80 RBP: ffff9a43567d3950 R8: 0000000000000c15 R9: ffff9a3fb09b9880 R10: ffff9a434fa0e3e8 R11: ffff9a43567d35ce R12: 0000000000000000 R13: ffff9a434f695280 R14: ffff9a43aa359c80 R15: ffff9a3fb9e005c0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Chad Dupuis <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 89da619 upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: [email protected] Signed-off-by: Jiang Biao <[email protected]> Signed-off-by: Huang Chong <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

In this patch, we add dcbnl buffer attribute to allow user change the NIC's buffer configuration such as priority to buffer mapping and buffer size of individual buffer. This attribute combined with pfc attribute allows advanced user to fine tune the qos setting for specific priority queue. For example, user can give dedicated buffer for one or more priorities or user can give large buffer to certain priorities. The dcb buffer configuration will be controlled by lldptool. lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6 maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6 lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0 sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to choose dcbnl over devlink interface since this feature is intended to set port attributes which are governed by the netdev instance of that port, where devlink API is more suitable for global ASIC configurations. We present an use case scenario where dcbnl buffer attribute configured by advance user helps reduce the latency of messages of different sizes. Scenarios description: On ConnectX-5, we run latency sensitive traffic with small/medium message sizes ranging from 64B to 256KB and bandwidth sensitive traffic with large messages sizes 512KB and 1MB. We group small, medium, and large message sizes to their own pfc enables priorities as follow. Priorities 1 & 2 (64B, 256B and 1KB) Priorities 3 & 4 (4KB, 8KB, 16KB, 64KB, 128KB and 256KB) Priorities 5 & 6 (512KB and 1MB) By default, ConnectX-5 maps all pfc enabled priorities to a single lossless fixed buffer size of 50% of total available buffer space. The other 50% is assigned to lossy buffer. Using dcbnl buffer attribute, we create three equal size lossless buffers. Each buffer has 25% of total available buffer space. Thus, the lossy buffer size reduces to 25%. Priority to lossless buffer mappings are set as follow. Priorities 1 & 2 on lossless buffer #1 Priorities 3 & 4 on lossless buffer #2 Priorities 5 & 6 on lossless buffer #3 We observe improvements in latency for small and medium message sizes as follows. Please note that the large message sizes bandwidth performance is reduced but the total bandwidth remains the same. 256B message size (42 % latency reduction) 4K message size (21% latency reduction) 64K message size (16% latency reduction) CC: Ido Schimmel <[email protected]> CC: Jakub Kicinski <[email protected]> CC: Jiri Pirko <[email protected]> CC: Or Gerlitz <[email protected]> CC: Parav Pandit <[email protected]> CC: Aron Silverton <[email protected]> Signed-off-by: Huy Nguyen <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Orabug: 28102581 (cherry picked from commit e549f6f) cherry-pick-repo=git/davem/net-next.git To avoid breaking the kABI, the new operations in the dcbnl_rtnl_ops has been split into a new struct that is put at the end of the netdevice struct. Change-Id: I942f0568b2db51376788326ab0c0fe0e24d25809 Signed-off-by: Dag Moxnes <[email protected]> Reviewed-by: Qing Huang <[email protected]> Tested-by: Gerald Gibson <[email protected]>

…sfers [ Upstream commit d52e4d0 ] This bug happens only when the UDC needs to sleep during usb_ep_dequeue, as is the case for (at least) dwc3. [ 382.200896] BUG: scheduling while atomic: screen/1808/0x00000100 [ 382.207124] 4 locks held by screen/1808: [ 382.211266] #0: (rcu_callback){....}, at: [<c10b4ff0>] rcu_process_callbacks+0x260/0x440 [ 382.219949] #1: (rcu_read_lock_sched){....}, at: [<c1358ba0>] percpu_ref_switch_to_atomic_rcu+0xb0/0x130 [ 382.230034] #2: (&(&ctx->ctx_lock)->rlock){....}, at: [<c11f0c73>] free_ioctx_users+0x23/0xd0 [ 382.230096] #3: (&(&ffs->eps_lock)->rlock){....}, at: [<f81e7710>] ffs_aio_cancel+0x20/0x60 [usb_f_fs] [ 382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common [ 382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117 [ 382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 382.230425] Call Trace: [ 382.230438] <SOFTIRQ> [ 382.230466] dump_stack+0x47/0x62 [ 382.230498] __schedule_bug+0x61/0x80 [ 382.230522] __schedule+0x43/0x7a0 [ 382.230587] schedule+0x5f/0x70 [ 382.230625] dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3] [ 382.230669] ? do_wait_intr_irq+0x70/0x70 [ 382.230724] usb_ep_dequeue+0x19/0x90 [udc_core] [ 382.230770] ffs_aio_cancel+0x37/0x60 [usb_f_fs] [ 382.230798] kiocb_cancel+0x31/0x40 [ 382.230822] free_ioctx_users+0x4d/0xd0 [ 382.230858] percpu_ref_switch_to_atomic_rcu+0x10a/0x130 [ 382.230881] ? percpu_ref_exit+0x40/0x40 [ 382.230904] rcu_process_callbacks+0x2b3/0x440 [ 382.230965] __do_softirq+0xf8/0x26b [ 382.231011] ? __softirqentry_text_start+0x8/0x8 [ 382.231033] do_softirq_own_stack+0x22/0x30 [ 382.231042] </SOFTIRQ> [ 382.231071] irq_exit+0x45/0xc0 [ 382.231089] smp_apic_timer_interrupt+0x13c/0x150 [ 382.231118] apic_timer_interrupt+0x35/0x3c [ 382.231132] EIP: __copy_user_ll+0xe2/0xf0 [ 382.231142] EFLAGS: 00210293 CPU: 1 [ 382.231154] EAX: bfd4508c EBX: 00000004 ECX: 00000003 EDX: f3d8fe50 [ 382.231165] ESI: f3d8fe51 EDI: bfd4508d EBP: f3d8fe14 ESP: f3d8fe08 [ 382.231176] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 382.231265] core_sys_select+0x25f/0x320 [ 382.231346] ? __wake_up_common_lock+0x62/0x80 [ 382.231399] ? tty_ldisc_deref+0x13/0x20 [ 382.231438] ? ldsem_up_read+0x1b/0x40 [ 382.231459] ? tty_ldisc_deref+0x13/0x20 [ 382.231479] ? tty_write+0x29f/0x2e0 [ 382.231514] ? n_tty_ioctl+0xe0/0xe0 [ 382.231541] ? tty_write_unlock+0x30/0x30 [ 382.231566] ? __vfs_write+0x22/0x110 [ 382.231604] ? security_file_permission+0x2f/0xd0 [ 382.231635] ? rw_verify_area+0xac/0x120 [ 382.231677] ? vfs_write+0x103/0x180 [ 382.231711] SyS_select+0x87/0xc0 [ 382.231739] ? SyS_write+0x42/0x90 [ 382.231781] do_fast_syscall_32+0xd6/0x1a0 [ 382.231836] entry_SYSENTER_32+0x47/0x71 [ 382.231848] EIP: 0xb7f75b05 [ 382.231857] EFLAGS: 00000246 CPU: 1 [ 382.231868] EAX: ffffffda EBX: 00000400 ECX: bfd4508c EDX: bfd4510c [ 382.231878] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: bfd45020 [ 382.231889] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 382.232281] softirq: huh, entered softirq 9 RCU c10b4d90 with preempt_count 00000100, exited with 00000000? Tested-by: Sam Protsenko <[email protected]> Signed-off-by: Vincent Pelletier <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Orabug: 28518694 We're consistently hitting deadlocks here with XFS on recent kernels. After some digging through the crash files, it looks like everyone in the system is waiting for XFS to reclaim memory. Something like this: PID: 2733434 TASK: ffff8808cd242800 CPU: 19 COMMAND: "java" #0 [ffff880019c53588] __schedule at ffffffff818c4df2 #1 [ffff880019c535d8] schedule at ffffffff818c5517 #2 [ffff880019c535f8] _xfs_log_force_lsn at ffffffff81316348 #3 [ffff880019c53688] xfs_log_force_lsn at ffffffff813164fb #4 [ffff880019c536b8] xfs_iunpin_wait at ffffffff8130835e #5 [ffff880019c53728] xfs_reclaim_inode at ffffffff812fd453 #6 [ffff880019c53778] xfs_reclaim_inodes_ag at ffffffff812fd8c7 #7 [ffff880019c53928] xfs_reclaim_inodes_nr at ffffffff812fe433 #8 [ffff880019c53958] xfs_fs_free_cached_objects at ffffffff8130d3b9 #9 [ffff880019c53968] super_cache_scan at ffffffff811a6f73 xfs_log_force_lsn is waiting for logs to get cleaned, which is waiting for IO, which is waiting for workers to complete the IO which is waiting for worker threads that don't exist yet: PID: 2752451 TASK: ffff880bd6bdda00 CPU: 37 COMMAND: "kworker/37:1" #0 [ffff8808d20abbb0] __schedule at ffffffff818c4df2 #1 [ffff8808d20abc00] schedule at ffffffff818c5517 #2 [ffff8808d20abc20] schedule_timeout at ffffffff818c7c6c #3 [ffff8808d20abcc0] wait_for_completion_killable at ffffffff818c6495 #4 [ffff8808d20abd30] kthread_create_on_node at ffffffff8106ec82 #5 [ffff8808d20abdf0] create_worker at ffffffff8106752f #6 [ffff8808d20abe40] worker_thread at ffffffff810699be #7 [ffff8808d20abec0] kthread at ffffffff8106ef59 #8 [ffff8808d20abf50] ret_from_fork at ffffffff818c8ac8 I think we should be using WQ_MEM_RECLAIM to make sure this thread pool makes progress when we're not able to allocate new workers. [dchinner: make all workqueues WQ_MEM_RECLAIM] Signed-off-by: Chris Mason <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Dave Chinner <[email protected]> (cherry picked from commit 7a29ac4) Signed-off-by: Junxiao Bi <[email protected]> Reviewed-by: Shan Hai <[email protected]> Signed-off-by: Brian Maly <[email protected]>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The customer hit this crash few times. PID: 31556 TASK: ffff880f823caa00 CPU: 1 COMMAND: "cellsrv" #0 [ffff880f823db850] machine_kexec at ffffffff8105d93c #1 [ffff880f823db8b0] crash_kexec at ffffffff811103b3 #2 [ffff880f823db980] oops_end at ffffffff8101a788 #3 [ffff880f823db9b0] no_context at ffffffff8106b9cf #4 [ffff880f823dba20] __bad_area_nosemaphore at ffffffff8106bc9d #5 [ffff880f823dba70] bad_area at ffffffff8106be97 #6 [ffff880f823dbaa0] __do_page_fault at ffffffff8106c71e #7 [ffff880f823dbb00] do_page_fault at ffffffff8106c81f #8 [ffff880f823dbb40] page_fault at ffffffff816b5a9f [exception RIP: rds_ib_inc_copy_to_user+104] RIP: ffffffffa04607b8 RSP: ffff880f823dbbf8 RFLAGS: 00010287 RAX: 0000000000000340 RBX: 0000000000001000 RCX: 0000000000004000 RDX: 0000000000001000 RSI: ffff88176cea2000 RDI: ffff8817d291f520 RBP: ffff880f823dbc48 R8: 0000000000001340 R9: 0000000000001000 R10: 0000000000001200 R11: ffff880f823dc000 R12: ffff880f823dbed0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000001000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff880f823dbc50] rds_recvmsg at ffffffffa041d837 [rds] int rds_ib_inc_copy_to_user(struct rds_incoming *inc, struct iov_iter *to) ... ... ibinc = container_of(inc, struct rds_ib_incoming, ii_inc); frag = list_entry(ibinc->ii_frags.next, struct rds_page_frag, f_item); len = be32_to_cpu(inc->i_hdr.h_len); sg = frag->f_sg; while (iov_iter_count(to) && copied < len) { to_copy = min_t(unsigned long, iov_iter_count(to), sg->length - frag_off); ... sg is NULL and it crashes accessing sg->length above. The cause looks like is due to ic->i_frag_sz returning incorrect value. 16KB when 4KB was expected. if (copied % ic->i_frag_sz == 0) { frag = list_entry(frag->f_item.next, struct rds_page_frag, f_item); frag_off = 0; sg = frag->f_sg; } The other end is using 4KB RDS fragsize (Solaris Super Cluster). This end is UEK4 (4.1.12-94.8.4.el6uek.x86_64). The message being copied arrived over 4KB RDS frag size connection. But during the above check ic->i_frag_sz is 16KB. This can happen during a reconnect at the connection setup phase. We start off with ic->i_frag_sz as 16KB. Then settle down at 4KB. Failing this check if (copied % ic->i_frag_sz == 0) { can result in sg not getting set correctly. Say, "copied" = 4KB but ic->i_frag_sz is 16KB when it should be 4KB. During race condition with a reconnect, ic->i_frag_sz can be 16KB even though once the connection is set up it settled down to 4KB. It can change from 4KB to 16KB and back to 4KB during connection setup due to reconnect. We started seeing this crash after bug 26848749. But prior to that the same scenario could result in data copied to user from incorrect "sg" resulting in data corruption. Orabug: 28506569 Signed-off-by: Venkat Venkatsubra <[email protected]> Reviewed-by: Rama Nichanamatlu <[email protected]> Signed-off-by: Brian Maly <[email protected]>

[ Upstream commit e04e7a7 ] This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b13 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Dexuan Cui <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: K. Y. Srinivasan <[email protected]> Cc: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

When netvsc device is removed it can call reschedule in RCU context. This happens because canceling the subchannel setup work could (in theory) cause a reschedule when manipulating the timer. To reproduce, run with lockdep enabled kernel and unbind a network device from hv_netvsc (via sysfs). [ 160.682011] WARNING: suspicious RCU usage [ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted [ 160.709937] ----------------------------- [ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 160.723691] [ 160.723691] other info that might help us debug this: [ 160.723691] [ 160.730955] [ 160.730955] rcu_scheduler_active = 2, debug_locks = 1 [ 160.762813] 5 locks held by rebind-eth.sh/1812: [ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0 [ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0 [ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0 [ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250 [ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.828629] [ 160.828629] stack backtrace: [ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2 [ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 160.832952] Call Trace: [ 160.832952] dump_stack+0x85/0xcb [ 160.832952] ___might_sleep+0x1a3/0x240 [ 160.832952] __flush_work+0x57/0x2e0 [ 160.832952] ? __mutex_lock+0x83/0x990 [ 160.832952] ? __kernfs_remove+0x24f/0x2e0 [ 160.832952] ? __kernfs_remove+0x1b2/0x2e0 [ 160.832952] ? mark_held_locks+0x50/0x80 [ 160.832952] ? get_work_pool+0x90/0x90 [ 160.832952] __cancel_work_timer+0x13c/0x1e0 [ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.832952] ? __lock_is_held+0x55/0x90 [ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc] [ 160.832952] vmbus_remove+0x26/0x30 [ 160.832952] device_release_driver_internal+0x18a/0x250 [ 160.832952] unbind_store+0xb4/0x180 [ 160.832952] kernfs_fop_write+0x113/0x1a0 [ 160.832952] __vfs_write+0x36/0x1a0 [ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80 [ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60 [ 160.832952] ? __sb_start_write+0x141/0x1a0 [ 160.832952] ? vfs_write+0x184/0x1b0 [ 160.832952] vfs_write+0xbe/0x1b0 [ 160.832952] ksys_write+0x55/0xc0 [ 160.832952] do_syscall_64+0x60/0x1b0 [ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 160.832952] RIP: 0033:0x7fe48f4c8154 Resolve this by getting RTNL earlier. This is safe because the subchannel work queue does trylock on RTNL and will detect the race. Fixes: 7b2ee50 ("hv_netvsc: common detach logic") Signed-off-by: Stephen Hemminger <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit 018349d) Orabug: 28671425 Signed-off-by: Liam Merwick <[email protected]> Reviewed-by: Darren Kenny <[email protected]> Reviewed-by: Alejandro Jimenez <[email protected]> Tested-by: Vijay Balakrishna <[email protected]>

The customer hit this crash few times. PID: 31556 TASK: ffff880f823caa00 CPU: 1 COMMAND: "cellsrv" #0 [ffff880f823db850] machine_kexec at ffffffff8105d93c #1 [ffff880f823db8b0] crash_kexec at ffffffff811103b3 #2 [ffff880f823db980] oops_end at ffffffff8101a788 #3 [ffff880f823db9b0] no_context at ffffffff8106b9cf #4 [ffff880f823dba20] __bad_area_nosemaphore at ffffffff8106bc9d #5 [ffff880f823dba70] bad_area at ffffffff8106be97 #6 [ffff880f823dbaa0] __do_page_fault at ffffffff8106c71e #7 [ffff880f823dbb00] do_page_fault at ffffffff8106c81f #8 [ffff880f823dbb40] page_fault at ffffffff816b5a9f [exception RIP: rds_ib_inc_copy_to_user+104] RIP: ffffffffa04607b8 RSP: ffff880f823dbbf8 RFLAGS: 00010287 RAX: 0000000000000340 RBX: 0000000000001000 RCX: 0000000000004000 RDX: 0000000000001000 RSI: ffff88176cea2000 RDI: ffff8817d291f520 RBP: ffff880f823dbc48 R8: 0000000000001340 R9: 0000000000001000 R10: 0000000000001200 R11: ffff880f823dc000 R12: ffff880f823dbed0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000001000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff880f823dbc50] rds_recvmsg at ffffffffa041d837 [rds] int rds_ib_inc_copy_to_user(struct rds_incoming *inc, struct iov_iter *to) ... ... ibinc = container_of(inc, struct rds_ib_incoming, ii_inc); frag = list_entry(ibinc->ii_frags.next, struct rds_page_frag, f_item); len = be32_to_cpu(inc->i_hdr.h_len); sg = frag->f_sg; while (iov_iter_count(to) && copied < len) { to_copy = min_t(unsigned long, iov_iter_count(to), sg->length - frag_off); ... sg is NULL and it crashes accessing sg->length above. The cause looks like is due to ic->i_frag_sz returning incorrect value. 16KB when 4KB was expected. if (copied % ic->i_frag_sz == 0) { frag = list_entry(frag->f_item.next, struct rds_page_frag, f_item); frag_off = 0; sg = frag->f_sg; } The other end is using 4KB RDS fragsize (Solaris Super Cluster). This end is UEK4 (4.1.12-94.8.4.el6uek.x86_64). The message being copied arrived over 4KB RDS frag size connection. But during the above check ic->i_frag_sz is 16KB. This can happen during a reconnect at the connection setup phase. We start off with ic->i_frag_sz as 16KB. Then settle down at 4KB. Failing this check if (copied % ic->i_frag_sz == 0) { can result in sg not getting set correctly. Say, "copied" = 4KB but ic->i_frag_sz is 16KB when it should be 4KB. During race condition with a reconnect, ic->i_frag_sz can be 16KB even though once the connection is set up it settled down to 4KB. It can change from 4KB to 16KB and back to 4KB during connection setup due to reconnect. We started seeing this crash after bug 26848749. But prior to that the same scenario could result in data copied to user from incorrect "sg" resulting in data corruption. Orabug: 28748008 Reviewed-by: Rama Nichanamatlu <[email protected]> Signed-off-by: Venkat Venkatsubra <[email protected]>

commit 5d407b0 upstream A kernel crash occurrs when defragmented packet is fragmented in ip_do_fragment(). In defragment routine, skb_orphan() is called and skb->ip_defrag_offset is set. but skb->sk and skb->ip_defrag_offset are same union member. so that frag->sk is not NULL. Hence crash occurrs in skb->sk check routine in ip_do_fragment() when defragmented packet is fragmented. test commands: %iptables -t nat -I POSTROUTING -j MASQUERADE %hping3 192.168.4.2 -s 1000 -p 2000 -d 60000 splat looks like: [ 261.069429] kernel BUG at net/ipv4/ip_output.c:636! [ 261.075753] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 261.083854] CPU: 1 PID: 1349 Comm: hping3 Not tainted 4.19.0-rc2+ #3 [ 261.100977] RIP: 0010:ip_do_fragment+0x1613/0x2600 [ 261.106945] Code: e8 e2 38 e3 fe 4c 8b 44 24 18 48 8b 74 24 08 e9 92 f6 ff ff 80 3c 02 00 0f 85 da 07 00 00 48 8b b5 d0 00 00 00 e9 25 f6 ff ff <0f> 0b 0f 0b 44 8b 54 24 58 4c 8b 4c 24 18 4c 8b 5c 24 60 4c 8b 6c [ 261.127015] RSP: 0018:ffff8801031cf2c0 EFLAGS: 00010202 [ 261.134156] RAX: 1ffff1002297537b RBX: ffffed0020639e6e RCX: 0000000000000004 [ 261.142156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880114ba9bd8 [ 261.150157] RBP: ffff880114ba8a40 R08: ffffed0022975395 R09: ffffed0022975395 [ 261.158157] R10: 0000000000000001 R11: ffffed0022975394 R12: ffff880114ba9ca4 [ 261.166159] R13: 0000000000000010 R14: ffff880114ba9bc0 R15: dffffc0000000000 [ 261.174169] FS: 00007fbae2199700(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000 [ 261.183012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 261.189013] CR2: 00005579244fe000 CR3: 0000000119bf4000 CR4: 00000000001006e0 [ 261.198158] Call Trace: [ 261.199018] ? dst_output+0x180/0x180 [ 261.205011] ? save_trace+0x300/0x300 [ 261.209018] ? ip_copy_metadata+0xb00/0xb00 [ 261.213034] ? sched_clock_local+0xd4/0x140 [ 261.218158] ? kill_l4proto+0x120/0x120 [nf_conntrack] [ 261.223014] ? rt_cpu_seq_stop+0x10/0x10 [ 261.227014] ? find_held_lock+0x39/0x1c0 [ 261.233008] ip_finish_output+0x51d/0xb50 [ 261.237006] ? ip_fragment.constprop.56+0x220/0x220 [ 261.243011] ? nf_ct_l4proto_register_one+0x5b0/0x5b0 [nf_conntrack] [ 261.250152] ? rcu_is_watching+0x77/0x120 [ 261.255010] ? nf_nat_ipv4_out+0x1e/0x2b0 [nf_nat_ipv4] [ 261.261033] ? nf_hook_slow+0xb1/0x160 [ 261.265007] ip_output+0x1c7/0x710 [ 261.269005] ? ip_mc_output+0x13f0/0x13f0 [ 261.273002] ? __local_bh_enable_ip+0xe9/0x1b0 [ 261.278152] ? ip_fragment.constprop.56+0x220/0x220 [ 261.282996] ? nf_hook_slow+0xb1/0x160 [ 261.287007] raw_sendmsg+0x21f9/0x4420 [ 261.291008] ? dst_output+0x180/0x180 [ 261.297003] ? sched_clock_cpu+0x126/0x170 [ 261.301003] ? find_held_lock+0x39/0x1c0 [ 261.306155] ? stop_critical_timings+0x420/0x420 [ 261.311004] ? check_flags.part.36+0x450/0x450 [ 261.315005] ? _raw_spin_unlock_irq+0x29/0x40 [ 261.320995] ? _raw_spin_unlock_irq+0x29/0x40 [ 261.326142] ? cyc2ns_read_end+0x10/0x10 [ 261.330139] ? raw_bind+0x280/0x280 [ 261.334138] ? sched_clock_cpu+0x126/0x170 [ 261.338995] ? check_flags.part.36+0x450/0x450 [ 261.342991] ? __lock_acquire+0x4500/0x4500 [ 261.348994] ? inet_sendmsg+0x11c/0x500 [ 261.352989] ? dst_output+0x180/0x180 [ 261.357012] inet_sendmsg+0x11c/0x500 [ ... ] v2: - clear skb->sk at reassembly routine.(Eric Dumarzet) Fixes: fa0f527 ("ip: use rb trees for IP frag queue.") Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 46b3722 ] We occasionaly hit following assert failure in 'perf top', when processing the /proc info in multiple threads. perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: [Switching to Thread 0x7ffff11ba700 (LWP 13749)] 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0) at ...include/linux/refcount.h:109 #5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0) at util/comm.c:24 #6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:72 #7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:95 #8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2", timestamp=0, exec=false) at util/comm.c:111 #9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57 #10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457 #11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... The problem is that we keep global comm_str_root list, which is accessed by multiple threads during the 'perf top' startup and following 2 paths can race: thread 1: ... thread__new comm__new comm_str__findnew down_write(&comm_str_lock); __comm_str__findnew comm_str__get thread 2: ... comm__override or comm__free comm_str__put refcount_dec_and_test down_write(&comm_str_lock); rb_erase(&cs->rb_node, &comm_str_root); Because thread 2 first decrements the refcnt and only after then it removes the struct comm_str from the list, the thread 1 can find this object on the list with refcnt equls to 0 and hit the assert. This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects that already dropped the refcnt to 0. For the rest of the objects we take the refcnt before comparing its name and release it afterwards with comm_str__put, which can also release the object completely. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Kan Liang <[email protected]> Cc: Lukasz Odzioba <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b71c69c ] Fixes this warning that was provoked by a pairing: [60258.016221] WARNING: possible recursive locking detected [60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G O [60258.027146] -------------------------------------------- [60258.032464] kworker/u5:0/70 is trying to acquire lock: [60258.037609] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74 [60258.046863] [60258.046863] but task is already holding lock: [60258.052704] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.062905] [60258.062905] other info that might help us debug this: [60258.069441] Possible unsafe locking scenario: [60258.069441] [60258.075368] CPU0 [60258.077821] ---- [60258.080272] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.085510] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.090748] [60258.090748] *** DEADLOCK *** [60258.090748] [60258.096676] May be due to missing lock nesting notation [60258.096676] [60258.103472] 5 locks held by kworker/u5:0/70: [60258.107747] #0: ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.117263] #1: ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.126942] #2: (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8 [60258.134806] #3: (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8 [60258.142410] #4: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.153043] [60258.153043] stack backtrace: [60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G O 4.15.0-RD1812-BSP #1 [60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [60258.172485] Workqueue: hci0 hci_rx_work [60258.176331] Backtrace: [60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c) [60258.186379] r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000 [60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc) [60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4) [60258.207144] r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c [60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98) [60258.222655] r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013 [60258.230491] r4:00000000 [60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88) [60258.240970] r7:00000000 r6:b796e870 r5:00000001 r4:b796e800 [60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74) [60258.255004] r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800 [60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88) [60258.271117] r5:b796e800 r4:ba7d2000 [60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8) [60258.283933] r5:00000001 r4:ba6dce00 [60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8) [60258.295800] r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004 [60258.303635] r4:bb05d008 [60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214) [60258.314805] r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80 [60258.322641] r4:ba6dce00 [60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8) [60258.333374] r6:80e5743c r5:bb05d7c8 r4:b7957a80 [60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc) [60258.346018] r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00 [60258.353853] r4:bb05d7c8 [60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc) [60258.364503] r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800 [60258.372338] r4:baaa5d00 [60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160) [60258.382295] r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0 [60258.390130] r4:ba831080 [60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20) [60258.399915] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4 [60258.407751] r4:baaa8ac0 r3:baabe000 Signed-off-by: Philipp Puschmann <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3e1a127 upstream. When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Acked-by: Daniel Vetter <[email protected]> Cc: [email protected] Cc: Lukas Wunner <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Orabug: 35622106 (cherry picked from commit 93a3319) cherry-pick-repo=kernel/git/torvalds/linux.git unmodified-from-upstream: 93a3319 Signed-off-by: Mikhael Goikhman <[email protected]> Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Orabug: 36385281 (cherry picked from commit 374012b) cherry-pick-repo=kernel/git/torvalds/linux.git unmodified-from-upstream: 374012b Signed-off-by: Mikhael Goikhman <[email protected]> Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit a50dbeca28acf7051dfa92786b85f704c75db6eb) Signed-off-by: Vijayendra Suman <[email protected]>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 4b0dcae5c4797bf31c63011ed62917210d3fdac3) Signed-off-by: Sherry Yang <[email protected]>

[ Upstream commit 1469417 ] Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Harshit Mogalapalli <[email protected]> (cherry picked from commit 90fe1515b0d0c3b6a6791a8830634866335de049) Signed-off-by: Yifei Liu <[email protected]>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 68459b8e3ee554ce71878af9eb69659b9462c588) Signed-off-by: Vegard Nossum <[email protected]> (cherry picked from commit eaa8c23a83b5a719ac9bc795481595bbfc02fc18) Signed-off-by: Yifei Liu <[email protected]>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Orabug: 35383105 (cherry picked from commit 37c3b9f) cherry-pick-repo=kernel/git/torvalds/linux.git unmodified-from-upstream: 37c3b9f Signed-off-by: Mikhael Goikhman <[email protected]> Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Orabug: 35622106 (cherry picked from commit 93a3319) cherry-pick-repo=kernel/git/torvalds/linux.git unmodified-from-upstream: 93a3319 Signed-off-by: Mikhael Goikhman <[email protected]> Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Orabug: 36385281 (cherry picked from commit 374012b) cherry-pick-repo=kernel/git/torvalds/linux.git unmodified-from-upstream: 374012b Signed-off-by: Mikhael Goikhman <[email protected]> Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Lockdep reports following issue: WARNING: possible circular locking dependency detected ------------------------------------------------------ devlink/8191 is trying to acquire lock: ffff88813f32c250 (&devlink->lock_key#14){+.+.}-{3:3}, at: devlink_rel_devlink_handle_put+0x11e/0x2d0 but task is already holding lock: ffffffff8511eca8 (rtnl_mutex){+.+.}-{3:3}, at: unregister_netdev+0xe/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (rtnl_mutex){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 register_netdevice_notifier_net+0x13/0x30 mlx5_lag_add_mdev+0x51c/0xa00 [mlx5_core] mlx5_load+0x222/0xc70 [mlx5_core] mlx5_init_one_devl_locked+0x4a0/0x1310 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x786/0xd00 [mlx5_core] local_pci_probe+0xd7/0x180 pci_device_probe+0x231/0x720 really_probe+0x1e4/0xb60 __driver_probe_device+0x261/0x470 driver_probe_device+0x49/0x130 __driver_attach+0x215/0x4c0 bus_for_each_dev+0xf0/0x170 bus_add_driver+0x21d/0x590 driver_register+0x133/0x460 vdpa_match_remove+0x89/0xc0 [vdpa] do_one_initcall+0xc4/0x360 do_init_module+0x22d/0x760 load_module+0x51d7/0x6750 init_module_from_file+0xd2/0x130 idempotent_init_module+0x326/0x5a0 __x64_sys_finit_module+0xc1/0x130 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #2 (mlx5_intf_mutex){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 mlx5_register_device+0x3e/0xd0 [mlx5_core] mlx5_init_one_devl_locked+0x8fa/0x1310 [mlx5_core] mlx5_devlink_reload_up+0x147/0x170 [mlx5_core] devlink_reload+0x203/0x380 devlink_nl_cmd_reload+0xb84/0x10e0 genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #1 (&dev->lock_key#8){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 mlx5_init_one_devl_locked+0x45/0x1310 [mlx5_core] mlx5_devlink_reload_up+0x147/0x170 [mlx5_core] devlink_reload+0x203/0x380 devlink_nl_cmd_reload+0xb84/0x10e0 genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#14){+.+.}-{3:3}: check_prev_add+0x1af/0x2300 __lock_acquire+0x31d7/0x4eb0 lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 devlink_rel_devlink_handle_put+0x11e/0x2d0 devlink_nl_port_fill+0xddf/0x1b00 devlink_port_notify+0xb5/0x220 __devlink_port_type_set+0x151/0x510 devlink_port_netdevice_event+0x17c/0x220 notifier_call_chain+0x97/0x240 unregister_netdevice_many_notify+0x876/0x1790 unregister_netdevice_queue+0x274/0x350 unregister_netdev+0x18/0x20 mlx5e_vport_rep_unload+0xc5/0x1c0 [mlx5_core] __esw_offloads_unload_rep+0xd8/0x130 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] mlx5_esw_offloads_unload_rep+0x85/0xc0 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x41/0x90 [mlx5_core] mlx5_devlink_sf_port_del+0x120/0x280 [mlx5_core] genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 other info that might help us debug this: Chain exists of: &devlink->lock_key#14 --> mlx5_intf_mutex --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(mlx5_intf_mutex); lock(rtnl_mutex); lock(&devlink->lock_key#14); Problem is taking the devlink instance lock of nested instance when RTNL is already held. To fix this, don't take the devlink instance lock when putting nested handle. Instead, rely on the preparations done by previous two patches to be able to access device pointer and obtain netns id without devlink instance lock held. Fixes: c137743 ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Orabug: 36680931 (cherry picked from commit b5f4e37) cherry-pick-repo: kernel/git/torvalds/linux.git unmodified-from-upstream: b5f4e37 Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Due to the cited patch, devlink health commands take devlink lock and this may result in deadlock for mlx5e_tx_reporter as it takes local state_lock before calling devlink health report and on the other hand devlink health commands such as diagnose for same reporter take local state_lock after taking devlink lock (see kernel log below). To fix it, remove local state_lock from mlx5e_tx_timeout_work() before calling devlink_health_report() and take care to cancel the work before any call to close channels, which may free the SQs that should be handled by the work. Before cancel_work_sync(), use current_work() to check we are not calling it from within the work, as mlx5e_tx_timeout_work() itself may close the channels and reopen as part of recovery flow. While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock() and a flag to avoid deadlock by calling cancel_work_sync() before closing the channels while holding rtnl_lock too. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted ------------------------------------------------------ kworker/u16:2/65 is trying to acquire lock: ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0 but task is already holding lock: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x12c/0x14b0 mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core] devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x2e9/0x530 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x438/0x710 netlink_sendmsg+0x788/0xc40 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x1c1/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#2){+.+.}-{3:3}: __lock_acquire+0x2c8a/0x6200 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock(&devlink->lock_key#2); lock(&priv->state_lock); lock(&devlink->lock_key#2); *** DEADLOCK *** 4 locks held by kworker/u16:2/65: #0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core] #3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] stack backtrace: CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? find_held_lock+0x2d/0x110 ? __stack_depot_save+0x24c/0x520 ? alloc_chain_hlocks+0x228/0x700 __lock_acquire+0x2c8a/0x6200 ? register_lock_class+0x1860/0x1860 ? kasan_save_stack+0x1e/0x40 ? kasan_set_free_info+0x20/0x30 ? ____kasan_slab_free+0x11d/0x1b0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? devlink_health_report+0x3d5/0x7e0 lock_acquire+0x1c1/0x550 ? devlink_health_report+0x2f1/0x7e0 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? find_held_lock+0x2d/0x110 __mutex_lock+0x12c/0x14b0 ? devlink_health_report+0x2f1/0x7e0 ? devlink_health_report+0x2f1/0x7e0 ? mutex_lock_io_nested+0x1320/0x1320 ? trace_hardirqs_on+0x2d/0x100 ? bit_wait_io_timeout+0x170/0x170 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core] ? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] ? mutex_lock_io_nested+0x1320/0x1320 ? process_one_work+0x70f/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? lock_downgrade+0x6e0/0x6e0 mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: c90005b ("devlink: Hold the instance lock in health callbacks") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Orabug: 36680931 (cherry picked from commit eab0da3) cherry-pick-repo=kernel/git/torvalds/linux.git unmodified-from-upstream: eab0da3 Signed-off-by: Mikhael Goikhman <[email protected]> Signed-off-by: Qing Huang <[email protected]> Reviewed-by: Devesh Sharma <[email protected]> Signed-off-by: Brian Maly <[email protected]>

[ Upstream commit 3d65860 ] Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 8a6e85f ("virt: acrn: obtain pa from VMA with PFNMAP flag") Signed-off-by: David Hildenbrand <[email protected]> Cc: Alex Williamson <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Fei Li <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Yonghua Huang <[email protected]> Cc: Sean Christopherson <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 5c6705aa47b5b78d7ad36fea832bb69caa5bf49a) Signed-off-by: Vijayendra Suman <[email protected]>

This problem occurs when the user gets notified of a successful rdma write + bcopy message completion but the peer application does not receive the bcopy message. This happens during a port down/up test. What seems to happen is the rdma write succeeds but the bcopy message fails. RDS should not be returning successful completion status to the user in this case. When RDS does a rdma followed by a bcopy message the user notification is supposed to be implemented by method #3 below. /* If the user asked for a completion notification on this * message, we can implement three different semantics: * 1. Notify when we received the ACK on the RDS message * that was queued with the RDMA. This provides reliable * notification of RDMA status at the expense of a one-way * packet delay. * 2. Notify when the IB stack gives us the completion event for * the RDMA operation. * 3. Notify when the IB stack gives us the completion event for * the accompanying RDS messages. * Here, we implement approach #3. To implement approach #2, * we would need to take an event for the rdma WR. To implement #1, * don't call rds_rdma_send_complete at all, and fall back to the notify * handling in the ACK processing code. But unfortunately the user gets notified earlier to knowing the bcopy send status. Right after rdma write completes the user gets notified even though the subsequent bcopy eventually fails. The fix is to delay signaling completions of rdma op till the bcopy send completes. Orabug: 22847528 Signed-off-by: Venkat Venkatsubra <[email protected]> Acked-by: Rama Nichanamatlu <[email protected]> Orabug: 27364391 (cherry picked from commit 804df7a) cherry-pick-repo=linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Signed-off-by: Somasundaram Krishnasamy <[email protected]> Orabug: 33590097 UEK6 => UEK7 (cherry picked from commit 9bca09b) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]> Orabug: 33590087 UEK7 => LUCI (cherry picked from commit 9dc52eb) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]>

Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Orabug: 27530931 Signed-off-by: Guanglei Li <[email protected]> Signed-off-by: Honglei Wang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Yanjun Zhu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit 2c0aa08) Reviewed-by: Håkon Bugge <[email protected]> Signed-off-by: Somasundaram Krishnasamy <[email protected]> Orabug: 33590097 UEK6 => UEK7 (cherry picked from commit 39e0939) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]> Orabug: 33590087 UEK7 => LUCI (cherry picked from commit 7d342f8) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]>

The customer hit this crash few times. PID: 31556 TASK: ffff880f823caa00 CPU: 1 COMMAND: "cellsrv" #0 [ffff880f823db850] machine_kexec at ffffffff8105d93c #1 [ffff880f823db8b0] crash_kexec at ffffffff811103b3 #2 [ffff880f823db980] oops_end at ffffffff8101a788 #3 [ffff880f823db9b0] no_context at ffffffff8106b9cf #4 [ffff880f823dba20] __bad_area_nosemaphore at ffffffff8106bc9d #5 [ffff880f823dba70] bad_area at ffffffff8106be97 #6 [ffff880f823dbaa0] __do_page_fault at ffffffff8106c71e #7 [ffff880f823dbb00] do_page_fault at ffffffff8106c81f #8 [ffff880f823dbb40] page_fault at ffffffff816b5a9f [exception RIP: rds_ib_inc_copy_to_user+104] RIP: ffffffffa04607b8 RSP: ffff880f823dbbf8 RFLAGS: 00010287 RAX: 0000000000000340 RBX: 0000000000001000 RCX: 0000000000004000 RDX: 0000000000001000 RSI: ffff88176cea2000 RDI: ffff8817d291f520 RBP: ffff880f823dbc48 R8: 0000000000001340 R9: 0000000000001000 R10: 0000000000001200 R11: ffff880f823dc000 R12: ffff880f823dbed0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000001000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff880f823dbc50] rds_recvmsg at ffffffffa041d837 [rds] int rds_ib_inc_copy_to_user(struct rds_incoming *inc, struct iov_iter *to) ... ... ibinc = container_of(inc, struct rds_ib_incoming, ii_inc); frag = list_entry(ibinc->ii_frags.next, struct rds_page_frag, f_item); len = be32_to_cpu(inc->i_hdr.h_len); sg = frag->f_sg; while (iov_iter_count(to) && copied < len) { to_copy = min_t(unsigned long, iov_iter_count(to), sg->length - frag_off); ... sg is NULL and it crashes accessing sg->length above. The cause looks like is due to ic->i_frag_sz returning incorrect value. 16KB when 4KB was expected. if (copied % ic->i_frag_sz == 0) { frag = list_entry(frag->f_item.next, struct rds_page_frag, f_item); frag_off = 0; sg = frag->f_sg; } The other end is using 4KB RDS fragsize (Solaris Super Cluster). This end is UEK4 (4.1.12-94.8.4.el6uek.x86_64). The message being copied arrived over 4KB RDS frag size connection. But during the above check ic->i_frag_sz is 16KB. This can happen during a reconnect at the connection setup phase. We start off with ic->i_frag_sz as 16KB. Then settle down at 4KB. Failing this check if (copied % ic->i_frag_sz == 0) { can result in sg not getting set correctly. Say, "copied" = 4KB but ic->i_frag_sz is 16KB when it should be 4KB. During race condition with a reconnect, ic->i_frag_sz can be 16KB even though once the connection is set up it settled down to 4KB. It can change from 4KB to 16KB and back to 4KB during connection setup due to reconnect. We started seeing this crash after bug 26848749. But prior to that the same scenario could result in data copied to user from incorrect "sg" resulting in data corruption. Orabug: 28748008 Reviewed-by: Rama Nichanamatlu <[email protected]> Signed-off-by: Venkat Venkatsubra <[email protected]> Orabug: 33590097 UEK6 => UEK7 (cherry picked from commit 14858a3) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]> Orabug: 33590087 UEK7 => LUCI (cherry picked from commit e86878f) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]>

…error The sequence that leads to this state is as follows. 1) First we see CQ error logged. Sep 29 22:32:33 dm54cel14 kernel: [471472.784371] mlx4_core 0000:46:00.0: CQ access violation on CQN 000419 syndrome=0x2 vendor_error_syndrome=0x0 2) That is followed by the drop of the associated RDS connection. Sep 29 22:32:33 dm54cel14 kernel: [471472.784403] RDS/IB: connection <192.168.54.43,192.168.54.1,0> dropped due to 'qp event' 3) We don't get the WR_FLUSH_ERRs for the posted receive buffers after that. 4) RDS is stuck in rds_ib_conn_shutdown while shutting down that connection. crash64> bt 62577 PID: 62577 TASK: ffff88143f045400 CPU: 4 COMMAND: "kworker/u224:1" #0 [ffff8813663bbb58] __schedule at ffffffff816ab68b #1 [ffff8813663bbbb0] schedule at ffffffff816abca7 #2 [ffff8813663bbbd0] schedule_timeout at ffffffff816aee71 #3 [ffff8813663bbc80] rds_ib_conn_shutdown at ffffffffa041f7d1 [rds_rdma] #4 [ffff8813663bbd10] rds_conn_shutdown at ffffffffa03dc6e2 [rds] #5 [ffff8813663bbdb0] rds_shutdown_worker at ffffffffa03e2699 [rds] #6 [ffff8813663bbe00] process_one_work at ffffffff8109cda1 #7 [ffff8813663bbe50] worker_thread at ffffffff8109d92b #8 [ffff8813663bbec0] kthread at ffffffff810a304b #9 [ffff8813663bbf50] ret_from_fork at ffffffff816b0752 crash64> It was stuck here in rds_ib_conn_shutdown for ever: /* quiesce tx and rx completion before tearing down */ while (!wait_event_timeout(rds_ib_ring_empty_wait, rds_ib_ring_empty(&ic->i_recv_ring) && (atomic_read(&ic->i_signaled_sends) == 0), msecs_to_jiffies(5000))) { /* Try to reap pending RX completions every 5 secs */ if (!rds_ib_ring_empty(&ic->i_recv_ring)) { spin_lock_bh(&ic->i_rx_lock); rds_ib_rx(ic); spin_unlock_bh(&ic->i_rx_lock); } } The recv ring was not empty. w_alloc_ptr = 560 w_free_ptr = 256 This is what Mellanox had to say: When CQ moves to error (e.g. due to CQ Overrun, CQ Access violation) FW will generate Async event to notify this error, also the QPs that tries to access this CQ will be put to error state but will not be flushed since we must not post CQEs to a broken CQ. The QP that tries to access will also issue an Async catas event. In summary we cannot wait for any more WR_FLUSH_ERRs in that state. Orabug: 29180452 Reviewed-by: Rama Nichanamatlu <[email protected]> Signed-off-by: Venkat Venkatsubra <[email protected]> Orabug: 33590097 UEK6 => UEK7 (cherry picked from commit 964cad6) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]> Orabug: 33590087 UEK7 => LUCI (cherry picked from commit e40c8e4) cherry-pick-repo=UEK/production/linux-uek.git Signed-off-by: Gerd Rausch <[email protected]> Reviewed-by: William Kucharski <[email protected]>

One of our customers reported the following stack. crash-7.3.0> bt PID: 250515 TASK: ffff888189482f80 CPU: 1 COMMAND: "vmbackup" #0 [ffffc90025017878] die at ffffffff81033c22 #1 [ffffc900250178a8] do_trap at ffffffff81030990 #2 [ffffc900250178f8] do_error_trap at ffffffff810311d7 #3 [ffffc900250179c0] do_invalid_op at ffffffff81031310 #4 [ffffc900250179d0] invalid_op at ffffffff81a01f2a [exception RIP: ocfs2_truncate_rec+1914] RIP: ffffffffc1e73b4a RSP: ffffc90025017a80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000053a75 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8882d385be08 RDI: ffff8882d385be08 RBP: ffffc90025017b10 R8: 0000000000000000 R9: 0000000000005900 R10: 0000000000000001 R11: 0000000000aaaaaa R12: 0000000000000001 R13: ffff88829e5a9900 R14: ffffc90025017cf0 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: e030 SS: e02b #5 [ffffc90025017b18] ocfs2_remove_extent at ffffffffc1e73e6c [ocfs2] #6 [ffffc90025017bc8] ocfs2_remove_btree_range at ffffffffc1e745f2 [ocfs2] #7 [ffffc90025017c60] ocfs2_commit_truncate at ffffffffc1e75b1f [ocfs2] #8 [ffffc90025017d68] __dta_ocfs2_wipe_inode_606 at ffffffffc1e9a3e0 [ocfs2] #9 [ffffc90025017dd8] ocfs2_evict_inode at ffffffffc1e9ac10 [ocfs2] RIP: 00007f9b26ec8307 RSP: 00007ffc5a193f68 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000ddd0a0 RCX: 00007f9b26ec8307 RDX: 0000000000000001 RSI: 00007f9b2719e770 RDI: 0000000001010400 RBP: 0000000001263d80 R8: 0000000000000000 R9: 00000000012146a0 R10: 000000000000000d R11: 0000000000000246 R12: 0000000000ddd0a0 R13: 00007f9b27ba9595 R14: 00007f9b27ca4a50 R15: 00000000ffffffff ORIG_RAX: 0000000000000057 CS: 0033 SS: 002b crash-7.3.0> This crash resulted due to invalid extent record selected for truncate. At the top of the function ocfs2_truncate_rec(), the code checks if the first extent record at the leaf extent list corresponding to the input path is still empty. In that case the tree is rotated left to get rid of the empty extent record but this rotation did not happen. But the function ocfs2_truncate_rec() assumes that the top level call to ocfs2_rotate_tree_left() to get rid of the empty extent always succeeds and hence it decrements the input "index" value. This results in selection of a wrong record for truncate that causes to hit a call to BUG() with the message "Owner %llu: Invalid record truncate: (%u, %u) ". The stack above is the panic stack caused due to hitting BUG(). Though the function ocfs2_rotate_tree_left() was intended to get rid of the first empty record in the extent block, it did not call the function ocfs2_rotate_rightmost_leaf_left() as it did not find h_next_leaf_blk in the extentleaf block to be zero, instead, it proceeded to call __ocfs2_rotate_tree_left(). However the input "index" value was indeed pointing to the last extent record in the leaf block. The macro path_leaf_bh() was returning rightmost extent block as per the tree-depth. and the function ocfs2_find_cpos_for_right_leaf() also found out that the extent block in question is indeed the rightmost and hence there is nothing to rotate at the last extent record pointed by the input "index" value. Hence the extent tree in the leaf block was not totated at all. Hence, the real reason for the above panic is that the value of the field h_next_leaf_blk in the right most leaf block was non-zero that caused the tree not to rotate left resulting in selection of invalid record for truncate. The reason why h_next_leaf_blk was not cleared for the last extent block is still not known and the code changes here is a workaround to avoid the panic by verifying that the extent block in question is indeed the rightmost leaf block in the tree and then correcting the invalid h_next_leaf_blk value. These changes have been verified by the customer by running the provided rpm in their env. Orabug: 34393593 Signed-off-by: Gautham Ananthakrishna <[email protected]> Reviewed-by: Junxiao Bi <[email protected]>

Add a check to mlx5e_xmit() for shorter frames. A corrupted/malformed packet, with shorter length can eventually cause system panic further down in the code path. Avoid it by validating the length and dropping it at the earliest. Following is seen in our env with shorter skb->len crash> bt PID: 76981 TASK: ff19828cfe508000 CPU: 106 COMMAND: "vhost-76942" #0 [ff2d20159b39f2c8] machine_kexec at ffffffffad884801 #1 [ff2d20159b39f328] __crash_kexec at ffffffffad976142 #2 [ff2d20159b39f3f8] panic at ffffffffad8b3640 #3 [ff2d20159b39f4a0] no_context at ffffffffad8954e1 #4 [ff2d20159b39f518] __bad_area_nosemaphore at ffffffffad8958de #5 [ff2d20159b39f578] bad_area_nosemaphore at ffffffffad895a96 #6 [ff2d20159b39f588] do_kern_addr_fault at ffffffffad89688e #7 [ff2d20159b39f5b0] __do_page_fault at ffffffffad896b30 #8 [ff2d20159b39f618] do_page_fault at ffffffffad896db6 #9 [ff2d20159b39f650] page_fault at ffffffffae402acd [exception RIP: memcpy_erms+6] RIP: ffffffffae261ab6 RSP: ff2d20159b39f700 RFLAGS: 00010293 RAX: ff198291741ecf2e RBX: ff19828e70d6a100 RCX: fffffffffea1af2b RDX: fffffffffffffffd RSI: ff19828eba6d7e5e RDI: ff198291757d2000 RBP: ff2d20159b39f760 R8: ff198291741ecf00 R9: 000000000000037c R10: 000000000000003c R11: ff19828ffe953940 R12: ff198291741ecf20 R13: ff198267dcb1b600 R14: ff19828eeebb09c0 R15: ff198291741ecf00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ff2d20159b39f700] mlx5e_sq_xmit_wqe at ffffffffc05c162e [mlx5_core] #11 [ff2d20159b39f768] mlx5e_xmit at ffffffffc05c1ca3 [mlx5_core] #12 [ff2d20159b39f800] dev_hard_start_xmit at ffffffffae083766 #13 [ff2d20159b39f860] sch_direct_xmit at ffffffffae0e2564 #14 [ff2d20159b39f8b0] __qdisc_run at ffffffffae0e294e #15 [ff2d20159b39f928] __dev_queue_xmit at ffffffffae083eee #16 [ff2d20159b39f9a8] dev_queue_xmit at ffffffffae084370 #17 [ff2d20159b39f9b8] vlan_dev_hard_start_xmit at ffffffffc2fb6fec [8021q] #18 [ff2d20159b39f9d8] dev_hard_start_xmit at ffffffffae083766 #19 [ff2d20159b39fa38] __dev_queue_xmit at ffffffffae08416a #20 [ff2d20159b39fab8] dev_queue_xmit_accel at ffffffffae08438e #21 [ff2d20159b39fac8] macvlan_start_xmit at ffffffffc2fc18d9 [macvlan] #22 [ff2d20159b39faf0] dev_hard_start_xmit at ffffffffae083766 #23 [ff2d20159b39fb50] sch_direct_xmit at ffffffffae0e2564 #24 [ff2d20159b39fba0] __qdisc_run at ffffffffae0e294e #25 [ff2d20159b39fc18] __dev_queue_xmit at ffffffffae083c81 #26 [ff2d20159b39fc90] dev_queue_xmit at ffffffffae084370 #27 [ff2d20159b39fca0] tap_sendmsg at ffffffffc07206ed [tap] #28 [ff2d20159b39fd20] vhost_tx_batch at ffffffffc2fd6590 [vhost_net] #29 [ff2d20159b39fd68] handle_tx_copy at ffffffffc2fd70f3 [vhost_net] #30 [ff2d20159b39fe80] handle_tx at ffffffffc2fd7651 [vhost_net] #31 [ff2d20159b39feb0] handle_tx_kick at ffffffffc2fd76b5 [vhost_net] #32 [ff2d20159b39fec0] vhost_worker at ffffffffc12a5be8 [vhost] #33 [ff2d20159b39ff08] kthread at ffffffffad8dbfe5 #34 [ff2d20159b39ff50] ret_from_fork at ffffffffae400364 This change was discussed with Nvidia and they are in agreement. Orabug: 36879156 CVE: CVE-2024-41090 CVE: CVE-2024-41091 Fixes: e4cf27b ("net/mlx5e: Re-eanble client vlan TX acceleration") Reported-and-tested-by: Dongli Zhang <[email protected]> Signed-off-by: Manjunath Patil <[email protected]> Reviewed-by: Si-Wei Liu <[email protected]> Reviewed-by: Jack Vogel <[email protected]> Signed-off-by: Brian Maly <[email protected]>

Add a check to mlx5e_xmit() for shorter frames. A corrupted/malformed packet, with shorter length can eventually cause system panic further down in the code path. Avoid it by validating the length and dropping it at the earliest. Following is seen in our env with shorter skb->len crash> bt PID: 76981 TASK: ff19828cfe508000 CPU: 106 COMMAND: "vhost-76942" #0 [ff2d20159b39f2c8] machine_kexec at ffffffffad884801 #1 [ff2d20159b39f328] __crash_kexec at ffffffffad976142 #2 [ff2d20159b39f3f8] panic at ffffffffad8b3640 #3 [ff2d20159b39f4a0] no_context at ffffffffad8954e1 #4 [ff2d20159b39f518] __bad_area_nosemaphore at ffffffffad8958de #5 [ff2d20159b39f578] bad_area_nosemaphore at ffffffffad895a96 #6 [ff2d20159b39f588] do_kern_addr_fault at ffffffffad89688e #7 [ff2d20159b39f5b0] __do_page_fault at ffffffffad896b30 #8 [ff2d20159b39f618] do_page_fault at ffffffffad896db6 #9 [ff2d20159b39f650] page_fault at ffffffffae402acd [exception RIP: memcpy_erms+6] RIP: ffffffffae261ab6 RSP: ff2d20159b39f700 RFLAGS: 00010293 RAX: ff198291741ecf2e RBX: ff19828e70d6a100 RCX: fffffffffea1af2b RDX: fffffffffffffffd RSI: ff19828eba6d7e5e RDI: ff198291757d2000 RBP: ff2d20159b39f760 R8: ff198291741ecf00 R9: 000000000000037c R10: 000000000000003c R11: ff19828ffe953940 R12: ff198291741ecf20 R13: ff198267dcb1b600 R14: ff19828eeebb09c0 R15: ff198291741ecf00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ff2d20159b39f700] mlx5e_sq_xmit_wqe at ffffffffc05c162e [mlx5_core] #11 [ff2d20159b39f768] mlx5e_xmit at ffffffffc05c1ca3 [mlx5_core] #12 [ff2d20159b39f800] dev_hard_start_xmit at ffffffffae083766 #13 [ff2d20159b39f860] sch_direct_xmit at ffffffffae0e2564 #14 [ff2d20159b39f8b0] __qdisc_run at ffffffffae0e294e #15 [ff2d20159b39f928] __dev_queue_xmit at ffffffffae083eee #16 [ff2d20159b39f9a8] dev_queue_xmit at ffffffffae084370 #17 [ff2d20159b39f9b8] vlan_dev_hard_start_xmit at ffffffffc2fb6fec [8021q] #18 [ff2d20159b39f9d8] dev_hard_start_xmit at ffffffffae083766 #19 [ff2d20159b39fa38] __dev_queue_xmit at ffffffffae08416a #20 [ff2d20159b39fab8] dev_queue_xmit_accel at ffffffffae08438e #21 [ff2d20159b39fac8] macvlan_start_xmit at ffffffffc2fc18d9 [macvlan] #22 [ff2d20159b39faf0] dev_hard_start_xmit at ffffffffae083766 #23 [ff2d20159b39fb50] sch_direct_xmit at ffffffffae0e2564 #24 [ff2d20159b39fba0] __qdisc_run at ffffffffae0e294e #25 [ff2d20159b39fc18] __dev_queue_xmit at ffffffffae083c81 #26 [ff2d20159b39fc90] dev_queue_xmit at ffffffffae084370 #27 [ff2d20159b39fca0] tap_sendmsg at ffffffffc07206ed [tap] #28 [ff2d20159b39fd20] vhost_tx_batch at ffffffffc2fd6590 [vhost_net] #29 [ff2d20159b39fd68] handle_tx_copy at ffffffffc2fd70f3 [vhost_net] #30 [ff2d20159b39fe80] handle_tx at ffffffffc2fd7651 [vhost_net] #31 [ff2d20159b39feb0] handle_tx_kick at ffffffffc2fd76b5 [vhost_net] #32 [ff2d20159b39fec0] vhost_worker at ffffffffc12a5be8 [vhost] #33 [ff2d20159b39ff08] kthread at ffffffffad8dbfe5 #34 [ff2d20159b39ff50] ret_from_fork at ffffffffae400364 This change was discussed with Nvidia and they are in agreement. Orabug: 36879157 CVE: CVE-2024-41090 CVE: CVE-2024-41091 Fixes: e4cf27b ("net/mlx5e: Re-eanble client vlan TX acceleration") Reported-and-tested-by: Dongli Zhang <[email protected]> Signed-off-by: Manjunath Patil <[email protected]> Reviewed-by: Si-Wei Liu <[email protected]> Reviewed-by: Jack Vogel <[email protected]> (cherry picked from commit e7fd2c25dfed19d69e8158ff50d36f90400a7335) Signed-off-by: Sherry Yang <[email protected]>

Add a check to mlx5e_xmit() for shorter frames. A corrupted/malformed packet, with shorter length can eventually cause system panic further down in the code path. Avoid it by validating the length and dropping it at the earliest. Following is seen in our env with shorter skb->len crash> bt PID: 76981 TASK: ff19828cfe508000 CPU: 106 COMMAND: "vhost-76942" #0 [ff2d20159b39f2c8] machine_kexec at ffffffffad884801 #1 [ff2d20159b39f328] __crash_kexec at ffffffffad976142 #2 [ff2d20159b39f3f8] panic at ffffffffad8b3640 #3 [ff2d20159b39f4a0] no_context at ffffffffad8954e1 #4 [ff2d20159b39f518] __bad_area_nosemaphore at ffffffffad8958de #5 [ff2d20159b39f578] bad_area_nosemaphore at ffffffffad895a96 #6 [ff2d20159b39f588] do_kern_addr_fault at ffffffffad89688e #7 [ff2d20159b39f5b0] __do_page_fault at ffffffffad896b30 #8 [ff2d20159b39f618] do_page_fault at ffffffffad896db6 #9 [ff2d20159b39f650] page_fault at ffffffffae402acd [exception RIP: memcpy_erms+6] RIP: ffffffffae261ab6 RSP: ff2d20159b39f700 RFLAGS: 00010293 RAX: ff198291741ecf2e RBX: ff19828e70d6a100 RCX: fffffffffea1af2b RDX: fffffffffffffffd RSI: ff19828eba6d7e5e RDI: ff198291757d2000 RBP: ff2d20159b39f760 R8: ff198291741ecf00 R9: 000000000000037c R10: 000000000000003c R11: ff19828ffe953940 R12: ff198291741ecf20 R13: ff198267dcb1b600 R14: ff19828eeebb09c0 R15: ff198291741ecf00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ff2d20159b39f700] mlx5e_sq_xmit_wqe at ffffffffc05c162e [mlx5_core] #11 [ff2d20159b39f768] mlx5e_xmit at ffffffffc05c1ca3 [mlx5_core] #12 [ff2d20159b39f800] dev_hard_start_xmit at ffffffffae083766 #13 [ff2d20159b39f860] sch_direct_xmit at ffffffffae0e2564 #14 [ff2d20159b39f8b0] __qdisc_run at ffffffffae0e294e #15 [ff2d20159b39f928] __dev_queue_xmit at ffffffffae083eee #16 [ff2d20159b39f9a8] dev_queue_xmit at ffffffffae084370 #17 [ff2d20159b39f9b8] vlan_dev_hard_start_xmit at ffffffffc2fb6fec [8021q] #18 [ff2d20159b39f9d8] dev_hard_start_xmit at ffffffffae083766 #19 [ff2d20159b39fa38] __dev_queue_xmit at ffffffffae08416a #20 [ff2d20159b39fab8] dev_queue_xmit_accel at ffffffffae08438e #21 [ff2d20159b39fac8] macvlan_start_xmit at ffffffffc2fc18d9 [macvlan] #22 [ff2d20159b39faf0] dev_hard_start_xmit at ffffffffae083766 #23 [ff2d20159b39fb50] sch_direct_xmit at ffffffffae0e2564 #24 [ff2d20159b39fba0] __qdisc_run at ffffffffae0e294e #25 [ff2d20159b39fc18] __dev_queue_xmit at ffffffffae083c81 #26 [ff2d20159b39fc90] dev_queue_xmit at ffffffffae084370 #27 [ff2d20159b39fca0] tap_sendmsg at ffffffffc07206ed [tap] #28 [ff2d20159b39fd20] vhost_tx_batch at ffffffffc2fd6590 [vhost_net] #29 [ff2d20159b39fd68] handle_tx_copy at ffffffffc2fd70f3 [vhost_net] #30 [ff2d20159b39fe80] handle_tx at ffffffffc2fd7651 [vhost_net] #31 [ff2d20159b39feb0] handle_tx_kick at ffffffffc2fd76b5 [vhost_net] #32 [ff2d20159b39fec0] vhost_worker at ffffffffc12a5be8 [vhost] #33 [ff2d20159b39ff08] kthread at ffffffffad8dbfe5 #34 [ff2d20159b39ff50] ret_from_fork at ffffffffae400364 This change was discussed with Nvidia and they are in agreement. Orabug: 36879158 CVE: CVE-2024-41090 CVE: CVE-2024-41091 Fixes: e4cf27b ("net/mlx5e: Re-eanble client vlan TX acceleration") Reported-and-tested-by: Dongli Zhang <[email protected]> Signed-off-by: Manjunath Patil <[email protected]> Reviewed-by: Si-Wei Liu <[email protected]> Reviewed-by: Jack Vogel <[email protected]> Signed-off-by: Saeed Mirzamohammadi <[email protected]>

Add a check to mlx5e_xmit() for shorter frames. A corrupted/malformed packet, with shorter length can eventually cause system panic further down in the code path. Avoid it by validating the length and dropping it at the earliest. Following is seen in our env with shorter skb->len crash> bt PID: 76981 TASK: ff19828cfe508000 CPU: 106 COMMAND: "vhost-76942" #0 [ff2d20159b39f2c8] machine_kexec at ffffffffad884801 #1 [ff2d20159b39f328] __crash_kexec at ffffffffad976142 #2 [ff2d20159b39f3f8] panic at ffffffffad8b3640 #3 [ff2d20159b39f4a0] no_context at ffffffffad8954e1 #4 [ff2d20159b39f518] __bad_area_nosemaphore at ffffffffad8958de #5 [ff2d20159b39f578] bad_area_nosemaphore at ffffffffad895a96 #6 [ff2d20159b39f588] do_kern_addr_fault at ffffffffad89688e #7 [ff2d20159b39f5b0] __do_page_fault at ffffffffad896b30 #8 [ff2d20159b39f618] do_page_fault at ffffffffad896db6 #9 [ff2d20159b39f650] page_fault at ffffffffae402acd [exception RIP: memcpy_erms+6] RIP: ffffffffae261ab6 RSP: ff2d20159b39f700 RFLAGS: 00010293 RAX: ff198291741ecf2e RBX: ff19828e70d6a100 RCX: fffffffffea1af2b RDX: fffffffffffffffd RSI: ff19828eba6d7e5e RDI: ff198291757d2000 RBP: ff2d20159b39f760 R8: ff198291741ecf00 R9: 000000000000037c R10: 000000000000003c R11: ff19828ffe953940 R12: ff198291741ecf20 R13: ff198267dcb1b600 R14: ff19828eeebb09c0 R15: ff198291741ecf00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ff2d20159b39f700] mlx5e_sq_xmit_wqe at ffffffffc05c162e [mlx5_core] #11 [ff2d20159b39f768] mlx5e_xmit at ffffffffc05c1ca3 [mlx5_core] #12 [ff2d20159b39f800] dev_hard_start_xmit at ffffffffae083766 #13 [ff2d20159b39f860] sch_direct_xmit at ffffffffae0e2564 #14 [ff2d20159b39f8b0] __qdisc_run at ffffffffae0e294e #15 [ff2d20159b39f928] __dev_queue_xmit at ffffffffae083eee #16 [ff2d20159b39f9a8] dev_queue_xmit at ffffffffae084370 #17 [ff2d20159b39f9b8] vlan_dev_hard_start_xmit at ffffffffc2fb6fec [8021q] #18 [ff2d20159b39f9d8] dev_hard_start_xmit at ffffffffae083766 #19 [ff2d20159b39fa38] __dev_queue_xmit at ffffffffae08416a #20 [ff2d20159b39fab8] dev_queue_xmit_accel at ffffffffae08438e #21 [ff2d20159b39fac8] macvlan_start_xmit at ffffffffc2fc18d9 [macvlan] #22 [ff2d20159b39faf0] dev_hard_start_xmit at ffffffffae083766 #23 [ff2d20159b39fb50] sch_direct_xmit at ffffffffae0e2564 #24 [ff2d20159b39fba0] __qdisc_run at ffffffffae0e294e #25 [ff2d20159b39fc18] __dev_queue_xmit at ffffffffae083c81 #26 [ff2d20159b39fc90] dev_queue_xmit at ffffffffae084370 #27 [ff2d20159b39fca0] tap_sendmsg at ffffffffc07206ed [tap] #28 [ff2d20159b39fd20] vhost_tx_batch at ffffffffc2fd6590 [vhost_net] #29 [ff2d20159b39fd68] handle_tx_copy at ffffffffc2fd70f3 [vhost_net] #30 [ff2d20159b39fe80] handle_tx at ffffffffc2fd7651 [vhost_net] #31 [ff2d20159b39feb0] handle_tx_kick at ffffffffc2fd76b5 [vhost_net] #32 [ff2d20159b39fec0] vhost_worker at ffffffffc12a5be8 [vhost] #33 [ff2d20159b39ff08] kthread at ffffffffad8dbfe5 #34 [ff2d20159b39ff50] ret_from_fork at ffffffffae400364 This change was discussed with Nvidia and they are in agreement. Orabug: 36879159 CVE: CVE-2024-41090 CVE: CVE-2024-41091 Fixes: e4cf27b ("net/mlx5e: Re-eanble client vlan TX acceleration") Reported-and-tested-by: Dongli Zhang <[email protected]> Signed-off-by: Manjunath Patil <[email protected]> Reviewed-by: Si-Wei Liu <[email protected]> In UEK4 stats is not a pointer, change the dropped code. Signed-off-by: Jack Vogel <[email protected]> Signed-off-by: Alok Tiwari <[email protected]>

commit 22f0081 upstream. The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 53250b54c92fe087fd4b0c48f85529efe1ebd879) Signed-off-by: Vijayendra Suman <[email protected]>

[ Upstream commit 668c040 ] When the torture_type is set srcu or srcud and cb_barrier is non-zero, running the rcutorture test will trigger the following warning: [ 163.910989][ C1] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 163.910994][ C1] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 163.910999][ C1] preempt_count: 10001, expected: 0 [ 163.911002][ C1] RCU nest depth: 0, expected: 0 [ 163.911005][ C1] INFO: lockdep is turned off. [ 163.911007][ C1] irq event stamp: 30964 [ 163.911010][ C1] hardirqs last enabled at (30963): [<ffffffffabc7df52>] do_idle+0x362/0x500 [ 163.911018][ C1] hardirqs last disabled at (30964): [<ffffffffae616eff>] sysvec_call_function_single+0xf/0xd0 [ 163.911025][ C1] softirqs last enabled at (0): [<ffffffffabb6475f>] copy_process+0x16ff/0x6580 [ 163.911033][ C1] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 163.911038][ C1] Preemption disabled at: [ 163.911039][ C1] [<ffffffffacf1964b>] stack_depot_save_flags+0x24b/0x6c0 [ 163.911063][ C1] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 6.8.0-rc4-rt4-yocto-preempt-rt+ #3 1e39aa9a737dd024a3275c4f835a872f673a7d3a [ 163.911071][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [ 163.911075][ C1] Call Trace: [ 163.911078][ C1] <IRQ> [ 163.911080][ C1] dump_stack_lvl+0x88/0xd0 [ 163.911089][ C1] dump_stack+0x10/0x20 [ 163.911095][ C1] __might_resched+0x36f/0x530 [ 163.911105][ C1] rt_spin_lock+0x82/0x1c0 [ 163.911112][ C1] spin_lock_irqsave_ssp_contention+0xb8/0x100 [ 163.911121][ C1] srcu_gp_start_if_needed+0x782/0xf00 [ 163.911128][ C1] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 163.911136][ C1] ? debug_object_active_state+0x336/0x470 [ 163.911148][ C1] ? __pfx_srcu_gp_start_if_needed+0x10/0x10 [ 163.911156][ C1] ? __pfx_lock_release+0x10/0x10 [ 163.911165][ C1] ? __pfx_rcu_torture_barrier_cbf+0x10/0x10 [ 163.911188][ C1] __call_srcu+0x9f/0xe0 [ 163.911196][ C1] call_srcu+0x13/0x20 [ 163.911201][ C1] srcu_torture_call+0x1b/0x30 [ 163.911224][ C1] rcu_torture_barrier1cb+0x4a/0x60 [ 163.911247][ C1] __flush_smp_call_function_queue+0x267/0xca0 [ 163.911256][ C1] ? __pfx_rcu_torture_barrier1cb+0x10/0x10 [ 163.911281][ C1] generic_smp_call_function_single_interrupt+0x13/0x20 [ 163.911288][ C1] __sysvec_call_function_single+0x7d/0x280 [ 163.911295][ C1] sysvec_call_function_single+0x93/0xd0 [ 163.911302][ C1] </IRQ> [ 163.911304][ C1] <TASK> [ 163.911308][ C1] asm_sysvec_call_function_single+0x1b/0x20 [ 163.911313][ C1] RIP: 0010:default_idle+0x17/0x20 [ 163.911326][ C1] RSP: 0018:ffff888001997dc8 EFLAGS: 00000246 [ 163.911333][ C1] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: ffffffffae618b51 [ 163.911337][ C1] RDX: 0000000000000000 RSI: ffffffffaea80920 RDI: ffffffffaec2de80 [ 163.911342][ C1] RBP: ffff888001997dc8 R08: 0000000000000001 R09: ffffed100d740cad [ 163.911346][ C1] R10: ffffed100d740cac R11: ffff88806ba06563 R12: 0000000000000001 [ 163.911350][ C1] R13: ffffffffafe460c0 R14: ffffffffafe460c0 R15: 0000000000000000 [ 163.911358][ C1] ? ct_kernel_exit.constprop.3+0x121/0x160 [ 163.911369][ C1] ? lockdep_hardirqs_on+0xc4/0x150 [ 163.911376][ C1] arch_cpu_idle+0x9/0x10 [ 163.911383][ C1] default_idle_call+0x7a/0xb0 [ 163.911390][ C1] do_idle+0x362/0x500 [ 163.911398][ C1] ? __pfx_do_idle+0x10/0x10 [ 163.911404][ C1] ? complete_with_flags+0x8b/0xb0 [ 163.911416][ C1] cpu_startup_entry+0x58/0x70 [ 163.911423][ C1] start_secondary+0x221/0x280 [ 163.911430][ C1] ? __pfx_start_secondary+0x10/0x10 [ 163.911440][ C1] secondary_startup_64_no_verify+0x17f/0x18b [ 163.911455][ C1] </TASK> This commit therefore use smp_call_on_cpu() instead of smp_call_function_single(), make rcu_torture_barrier1cb() invoked happens on task-context. Signed-off-by: Zqiang <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Uladzislau Rezki (Sony) <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 103b56af907c20a0c24a27a19fc88892c0069444) Signed-off-by: Vijayendra Suman <[email protected]>

[ Upstream commit f1e197a ] trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. Signed-off-by: Wander Lairson Costa <[email protected]> Reported-by: Hu Chunyu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit b3722fb69468693555f531cddda5c30444726dac) Signed-off-by: Vijayendra Suman <[email protected]>

commit 22f0081 upstream. The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 05b2cd6d33f700597e6f081b53c668a226a96d28) Signed-off-by: Alok Tiwari <[email protected]>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 320273b5649bbcee87f9e65343077189699d2a7a) Signed-off-by: Vijayendra Suman <[email protected]>

[ Upstream commit f1e197a ] trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. Signed-off-by: Wander Lairson Costa <[email protected]> Reported-by: Hu Chunyu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 594e47957f3fe034645e6885393ce96c12286334) Signed-off-by: Alok Tiwari <[email protected]>

commit 22f0081 upstream. The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 217d1f44fff560b3995a685a60aa66e55a7f0f56) Signed-off-by: Vegard Nossum <[email protected]> (cherry picked from commit ac2c307a0180583e260719f923ba2edabddea919) Signed-off-by: Yifei Liu <[email protected]>

assign queue_num value before call complete_cmd_and_callback. complete_cmd_and_callback() is making srb *sp free using sp_put. which create use-after-free error in KASAN. [ 961.350693] ================================================================== [ 961.359537] BUG: KASAN: use-after-free in vhba_taskmgmt_flush_ios+0x19c/0x289 [xsvhba] [ 961.368376] Read of size 4 at addr ffff889f852c2898 by task scsi_eh_8/23358 [ 961.377810] CPU: 1 PID: 23358 Comm: scsi_eh_8 Kdump: loaded Not tainted 5.4.17-2136.331.01.35180168kasanreview.8.el7uek.v1.x86_64 #3 [ 961.377812] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30370100 07/12/2022 [ 961.377813] Call Trace: [ 961.377822] dump_stack+0x95/0xca [ 961.377831] ? vhba_taskmgmt_flush_ios+0x19c/0x289 [xsvhba] [ 961.377838] print_address_description.constprop.7+0x6b/0x3ec [ 961.377848] ? vhba_taskmgmt_flush_ios+0x19c/0x289 [xsvhba] [ 961.377857] ? vhba_taskmgmt_flush_ios+0x19c/0x289 [xsvhba] [ 961.377860] __kasan_report.cold.10+0x37/0x77 [ 961.377870] ? sp_put+0x10/0x60 [xsvhba] [ 961.377880] ? vhba_taskmgmt_flush_ios+0x19c/0x289 [xsvhba] [ 961.377882] kasan_report+0x14/0x1f [ 961.377885] __asan_load4+0x99/0x9f [ 961.377895] vhba_taskmgmt_flush_ios+0x19c/0x289 [xsvhba] [ 961.377906] xg_vhba_eh_device_reset+0x1b4/0x23b [xsvhba] [ 961.377914] scsi_eh_ready_devs+0xa85/0x187e [ 961.377917] ? scsi_eh_test_devices+0x450/0x445 [ 961.377921] ? __kasan_check_write+0x14/0x1a [ 961.377925] ? _raw_spin_lock_irqsave+0x8e/0xe5 [ 961.377927] ? scsi_eh_get_sense+0x13e/0x3e1 [ 961.377931] ? __pm_runtime_resume+0x60/0xa6 [ 961.377934] scsi_error_handler+0x843/0xa7d [ 961.377937] ? scsi_eh_get_sense+0x3f0/0x3e1 [ 961.377940] ? __kasan_check_write+0x14/0x1a [ 961.377942] ? _raw_spin_lock_irqsave+0x8e/0xe5 [ 961.377950] ? __wake_up_common+0xa9/0x257 [ 961.377952] ? __kasan_check_read+0x11/0x17 [ 961.377957] ? __kthread_parkme+0x90/0xab [ 961.377959] kthread+0x1c8/0x1e5 [ 961.377962] ? scsi_eh_get_sense+0x3f0/0x3e1 [ 961.377964] ? __kthread_cancel_work+0xa0/0x98 [ 961.377967] ret_from_fork+0x2b/0x36 [ 961.381055] Allocated by task 5054: [ 961.384947] save_stack+0x21/0x8b [ 961.384949] __kasan_kmalloc.constprop.12+0xc8/0xcd [ 961.384951] kasan_kmalloc+0x9/0xf [ 961.384953] kmem_cache_alloc_trace+0x140/0x33d [ 961.384963] xg_vhba_queuecommand_lck+0x7ed/0x14f5 [xsvhba] [ 961.384972] xg_vhba_queuecommand+0x4b/0x80 [xsvhba] [ 961.384975] scsi_queue_rq+0xca7/0x1252 [ 961.384978] __blk_mq_try_issue_directly+0x250/0x421 [ 961.384981] blk_mq_request_issue_directly+0xab/0x17c [ 961.384984] blk_insert_cloned_request+0xf0/0x1af [ 961.385003] dm_mq_queue_rq+0x487/0x7f0 [dm_mod] [ 961.385005] blk_mq_dispatch_rq_list+0x1bc/0xe77 [ 961.385010] blk_mq_do_dispatch_sched+0x279/0x2ce [ 961.385012] __blk_mq_sched_dispatch_requests+0x276/0x2fe [ 961.385015] blk_mq_sched_dispatch_requests+0x85/0xb1 [ 961.385016] __blk_mq_run_hw_queue+0x87/0x1c9 [ 961.385018] blk_mq_run_work_fn+0x3b/0x44 [ 961.385022] process_one_work+0x413/0x81d [ 961.385024] worker_thread+0x57/0x5ac [ 961.385025] kthread+0x1c8/0x1e5 [ 961.385028] ret_from_fork+0x2b/0x36 [ 961.388190] Freed by task 23358: [ 961.391789] save_stack+0x21/0x8b [ 961.391791] __kasan_slab_free+0x141/0x1c9 [ 961.391793] kasan_slab_free+0xe/0x14 [ 961.391795] kfree+0xb1/0x4e9 [ 961.391804] sp_put+0x4b/0x60 [xsvhba] [ 961.391813] complete_cmd_and_callback.part.19+0xa5/0x2f4 [xsvhba] [ 961.391823] vhba_taskmgmt_flush_ios+0x167/0x289 [xsvhba] [ 961.391832] xg_vhba_eh_device_reset+0x1b4/0x23b [xsvhba] [ 961.391834] scsi_eh_ready_devs+0xa85/0x187e [ 961.391837] scsi_error_handler+0x843/0xa7d [ 961.391838] kthread+0x1c8/0x1e5 [ 961.391840] ret_from_fork+0x2b/0x36 [ 961.395039] The buggy address belongs to the object at ffff889f852c2800 which belongs to the cache kmalloc-512 of size 512 [ 961.409018] The buggy address is located 152 bytes inside of 512-byte region [ffff889f852c2800, ffff889f852c2a00) [ 961.422123] The buggy address belongs to the page: [ 961.427474] page:ffffea007e14b000 refcount:1 mapcount:0 mapping:ffff888107c16300 index:0x0 compound_mapcount: 0 [ 961.427477] flags: 0x57ffffc0010200(slab|head) [ 961.427481] raw: 0057ffffc0010200 dead000000000100 dead000000000122 ffff888107c16300 [ 961.427484] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 961.427484] page dumped because: kasan: bad access detected [ 961.429148] Memory state around the buggy address: [ 961.434497] ffff889f852c2780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 961.442558] ffff889f852c2800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 961.450619] >ffff889f852c2880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 961.458680] ^ [ 961.463156] ffff889f852c2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 961.471218] ffff889f852c2980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 961.479279] ================================================================== Orabug: 35180168 Signed-off-by: Alok Tiwari <[email protected]> Reviewed-by: Joseph Salisbury <[email protected]> Reviewed-by: Samasth Norway Ananda <[email protected]> Signed-off-by: Alok Tiwari <[email protected]>

ib_dma_unmap_page for total number of nr_frags. assign NULL after kfree. we are getting random memory corruption issue. This issue was triggering when we are changing bond0 interface with eth0 -> eth4/4B. -------- [234265.742916] BUG: unable to handle page fault for address: ffffea27419e5c40 [234265.826473] #PF: supervisor write access in kernel mode [234265.890286] #PF: error_code(0x0002) - not-present page [234265.953077] PGD 17fcca067 P4D 17fcca067 PUD 0 [234266.007502] Oops: 0002 [#1] SMP NOPTI [234266.052567] CPU: 9 PID: 14451 Comm: ovs-ovca-networ Tainted: G E 5.4.17-2136.331.01.orabug35180168.27.el7uek.v1.x86_64 #3 [234266.200872] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30300200 07/10/2019 [234266.320855] RIP: e030:xen_unpin_page+0x5/0x181 [234266.375308] Code: 48 8b 0b 48 85 c9 75 e3 e9 56 ff ff ff 48 89 d0 48 23 3d 66 75 bf 01 48 23 05 f7 9c 4e 01 e9 17 ff ff ff 66 90 0f 1f 44 00 00 <f0> 48 0f ba 36 0a 72 07 31 c0 c3 cc cc cc cc 55 48 89 e5 41 57 41 [234266.601647] RSP: e02b:ffffc90002d23b38 EFLAGS: 00010082 [234266.665469] RAX: ffffffff8102c530 RBX: 0000000000000000 RCX: ffff888000000000 [234266.752209] RDX: 0000000000000003 RSI: ffffea27419e5c40 RDI: ffff8881f5061680 [234266.838939] RBP: ffffc90002d23bc8 R08: 0000000000000000 R09: 0000000000000000 [234266.925658] R10: 0000000000000000 R11: 0000000000000000 R12: ffff925067971000 [234267.012370] R13: 0000000000000100 R14: 0000000000000000 R15: 0000000000000200 [234267.099136] FS: 0000000000000000(0000) GS:ffff888207240000(0000) knlGS:ffff888207240000 [234267.197318] CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [234267.272587] CR2: ffffea27419e5c40 CR3: 000000019a8d4000 CR4: 0000000000042660 [234267.359300] Call Trace: [234267.389844] ? show_regs+0x59/0x60 [234267.431843] ? __die+0x9f/0xe7 [234267.469673] ? no_context+0x167/0x532 [234267.514772] ? __bad_area_nosemaphore+0x4e/0x1ec [234267.571314] ? uncharge_batch+0xe8/0x157 [234267.619531] ? bad_area_nosemaphore+0x16/0x1c [234267.672999] ? do_kern_addr_fault+0x7e/0x8d [234267.724335] ? __do_page_fault+0x290/0x4d1 [234267.774631] ? _copy_to_iter+0x37f/0x3f1 [234267.822884] ? do_page_fault+0x36/0x11e [234267.870095] ? page_fault+0x13d/0x142 [234267.915186] ? xen_pin_page+0x180/0x17e [234267.962352] ? xen_unpin_page+0x5/0x181 [234268.009519] ? xen_pin_page+0x180/0x17e [234268.056683] ? __xen_pgd_walk+0x294/0x390 [234268.105982] ? xen_pin_page+0x180/0x17e [234268.153143] __xen_pgd_unpin+0x1d9/0x252 [234268.201373] xen_exit_mmap+0xf8/0x1a1 [234268.246451] exit_mmap+0x66/0x1a1 [234268.287369] ? xen_write_cr3+0xa2/0x167 [234268.334526] ? _cond_resched+0x19/0x31 [234268.380643] mmput+0x66/0x131 [234268.417391] flush_old_exec+0x3f7/0x851 [234268.464538] load_elf_binary+0x3d2/0x14a5 [234268.513794] ? get_user_pages_remote+0x90/0x201 [234268.569264] ? __check_object_size+0x80/0x22a [234268.622654] ? __check_object_size+0x80/0x22a [234268.676043] search_binary_handler+0x9e/0x1d4 [234268.729421] __do_execve_file.isra.37+0x678/0x98b [234268.786994] __x64_sys_execve+0x49/0x58 [234268.834135] do_syscall_64+0x60/0x1e4 [234268.879192] entry_SYSCALL_64_after_hwframe+0x17b/0x0 [234268.940940] RIP: 0033:0x7fb234c7ddd7 [234268.984974] Code: Bad RIP value. [234269.024864] RSP: 002b:00007fffdee666e8 EFLAGS: 00000206 ORIG_RAX: 000000000000003b [234269.116806] RAX: ffffffffffffffda RBX: 000000000252f6a0 RCX: 00007fb234c7ddd7 [234269.203486] RDX: 000000000251c7d0 RSI: 00000000025264a0 RDI: 000000000252f6a0 [234269.290128] RBP: 0000000002526100 R08: 0000000000000000 R09: 0000000000000018 [234269.376817] R10: 00007fffdee66160 R11: 0000000000000206 R12: 0000000000000000 [234269.463446] R13: 00000000025264a0 R14: 000000000251c7d0 R15: 0000000000000000 [234269.550078] Modules linked in: xve(E) xsvnic(E) xscore(E) xen_acpi_processor xen_netback ocfs2_dlmfs xen_blkback ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager xen_gntalloc xen_gntdev ocfs2_stackglue xen_evtchn xenfs xen_privcmd scsi_transport_iscsi mptctl mptbase bonding sunrpc rds_rdma rds ib_umad rdma_ucm rdma_cm ib_ipoib intel_rapl_msr intel_rapl_common iw_cm ib_cm x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ipmi_ssif dm_service_time ghash_clmulni_intel iTCO_wdt iTCO_vendor_support aesni_intel mlx4_ib crypto_simd cryptd glue_helper cdc_ether ib_uverbs mei_me usbnet ib_core mii mei ipmi_si pcspkr i2c_i801 lpc_ich sg ioatdma ipmi_devintf ipmi_msghandler wmi dm_multipath dm_mod ip_tables ext4 mbcache jbd2 mlx4_en mgag200 drm_kms_helper sd_mod syscopyarea sysfillrect sysimgblt fb_sys_fops drm_vram_helper ttm ahci drm ixgbe libahci mlx4_core libata megaraid_sas i2c_algo_bit mdio dca [last unloaded: xscore] [234270.545347] CR2: ffffea27419e5c40 [234270.586256] ---[ end trace 610776877294d20b ]--- [234270.690545] RIP: e030:xen_unpin_page+0x5/0x181 [234270.744975] Code: 48 8b 0b 48 85 c9 75 e3 e9 56 ff ff ff 48 89 d0 48 23 3d 66 75 bf 01 48 23 05 f7 9c 4e 01 e9 17 ff ff ff 66 90 0f 1f 44 00 00 <f0> 48 0f ba 36 0a 72 07 31 c0 c3 cc cc cc cc 55 48 89 e5 41 57 41 [234270.971319] RSP: e02b:ffffc90002d23b38 EFLAGS: 00010082 [234271.035121] RAX: ffffffff8102c530 RBX: 0000000000000000 RCX: ffff888000000000 [234271.121822] RDX: 0000000000000003 RSI: ffffea27419e5c40 RDI: ffff8881f5061680 [234271.208611] RBP: ffffc90002d23bc8 R08: 0000000000000000 R09: 0000000000000000 [234271.295311] R10: 0000000000000000 R11: 0000000000000000 R12: ffff925067971000 [234271.382014] R13: 0000000000000100 R14: 0000000000000000 R15: 0000000000000200 [234271.457304] eth4: [PID0]kmem_cache_alloc called [234271.457304] [234271.468984] FS: 0000000000000000(0000) GS:ffff888207240000(0000) knlGS:ffff888207240000 [234271.468986] CS: 10000e030 DS: 000[02:31432:7917.:65744:5d077:0]1 e0t h4 :[ 2[3PI42D70]1e.t5h444 5M7AC 00:13:97:67:d0:01 0 [234271.544577] [234271.642742] CR2: 00007fb234c7ddad CR3: 000000019a8d4000 CR4: 0000000000042660 [234271.642747] Kernel panic - not syncing: Fatal exception [234271.677645] Kernel Offset: disabled [234272.042214] Rebooting in 60 seconds.. Orabug: 35180168 Signed-off-by: Alok Tiwari <[email protected]> Reviewed-by: Samasth Norway Ananda <[email protected]> Signed-off-by: Alok Tiwari <[email protected]>

Fix some typos

94b791d

Djelibeybi closed this Apr 16, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix some typos #3

Fix some typos #3

misyltoad commented Apr 16, 2018

Djelibeybi commented Apr 16, 2018

Fix some typos #3

Fix some typos #3

Conversation

misyltoad commented Apr 16, 2018

Djelibeybi commented Apr 16, 2018