Develop/Master Branch Merge and BicyclePower Profile and Arduino Example #4
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Hey,
I wrote a few comments on your blog a few months ago, since then much changed. I managed to get the bootloader with S340 Softdevice running and the ant_bleuart example worked finally. The problem was, that I used a newer version of the Adafruit Bootloader than 0.3.2 which made to changes to the Softdevice Size Configuration. Next I tried to change RX Mode to TX and with some additional functions in the HRM Profile that also worked. Now I moved on to creating the Power-Profile for my Bicycle PowerMeter which also went well. I created a first example with a HX711 Loadcell Amp to measure the bend of the crank and a basic Hall-Sensor to measure the current rpm. As that also worked with a self made Weighing cell (30x30mm Steel profile with 4 strain gauges) I wanted to share the Power Profile and also the example Program with you, as it belongs to your library.
This is my first time using Github so I already have to say sorry for all mistakes I made/will make.