Update config.default.ini

etc/dbus-serialbattery/config.default.ini

@@ -12,11 +12,6 @@ LOGGING = INFO
 MAX_BATTERY_CHARGE_CURRENT    = 50.0
 MAX_BATTERY_DISCHARGE_CURRENT = 60.0
 
-; ----------Cell count ------------
-; Predefine cell count for Jkbms_can
-; Should be autodetected if not set
-JKBMS_CAN_CELL_COUNT = 1
-
 ; --------- Cell Voltages ---------
 ; Description:
 ;     Cell min/max voltages which are used to calculate the min/max battery voltage
@@ -390,6 +385,14 @@ BATTERY_CAPACITY = 50
 ; Invert Battery Current. Default non-inverted. Set to -1 to invert
 INVERT_CURRENT_MEASUREMENT = 1
 
+; -- JK (Jikong) settings
+; Cell count
+; Predefine cell count for Jkbms_can
+; The cell count should be normally auto-detected by identifying the highest cell number,
+; but this process is sometimes slow what may cause that cells are not updated on VenusOS.
+; Try this workaround if you have experience problems with cell voltage.
+JKBMS_CAN_CELL_COUNT = 1
+
 ; -- ESC GreenMeter and Lipro device settings
 GREENMETER_ADDRESS  = 1
 LIPRO_START_ADDRESS = 2