E129/C186 new circular flight flag #333
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Workflow for testing MULTI-Module firmware builds | |
| name: CI | |
| on: | |
| # Trigger the workflow on pushes, except those that are tagged (avoids double-testing releases) | |
| push: | |
| branches: | |
| - '**' | |
| tags-ignore: | |
| - '**' | |
| paths: | |
| - '.github/workflows/**' | |
| - 'buildroot/bin/**' | |
| - 'Multiprotocol/**' | |
| # Trigger the workflow on pull requests to the master branch | |
| pull_request: | |
| branches: | |
| - master | |
| paths: | |
| - '.github/workflows/**' | |
| - 'buildroot/bin/**' | |
| - 'Multiprotocol/**' | |
| # Triggers the workflow on release creation | |
| release: | |
| types: | |
| - created | |
| # Allows the workflow to be triggered manually from the Actions tab | |
| workflow_dispatch: | |
| jobs: | |
| build: | |
| runs-on: ubuntu-latest | |
| # Configure the board matrix | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| board: [ | |
| "multi4in1:avr:multiatmega328p:bootloader=none", | |
| "multi4in1:avr:multiatmega328p:bootloader=optiboot", | |
| "multi4in1:avr:multixmega32d4", | |
| "multi4in1:STM32F1:multi5in1t18int", | |
| "multi4in1:STM32F1:multistm32f103cb:debug_option=none", | |
| "multi4in1:STM32F1:multistm32f103cb:debug_option=native", | |
| "multi4in1:STM32F1:multistm32f103cb:debug_option=ftdi", | |
| "multi4in1:STM32F1:multistm32f103c8:debug_option=none" | |
| ] | |
| # Set the environment variables | |
| env: | |
| BOARD: ${{ matrix.board }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install Arduino CLI | |
| uses: arduino/[email protected] | |
| with: | |
| version: "0.32.2" | |
| - name: Prepare build environment | |
| run: | | |
| echo "Github Ref: $GITHUB_REF" | |
| echo "Event name: ${{ github.event_name }}" | |
| echo "Event action: ${{ github.event.action }}" | |
| echo "Tag name: ${{ github.event.release.tag_name }}" | |
| arduino-cli config init --additional-urls https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/master/package_multi_4in1_board_index.json,https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/devel/source/package_multi_4in1_board_devel_index.json | |
| arduino-cli core update-index | |
| if [[ "$BOARD" =~ ":avr:" ]]; then | |
| arduino-cli core install arduino:avr; | |
| fi | |
| if [[ "$BOARD" =~ "multi4in1-devel:avr" ]]; then | |
| arduino-cli core install multi4in1-devel:avr | |
| elif [[ "$BOARD" =~ "multi4in1:avr" ]]; then | |
| arduino-cli core install multi4in1:avr | |
| fi | |
| if [[ "$BOARD" =~ "multi4in1-devel:STM32F1:" ]]; then | |
| arduino-cli core install multi4in1-devel:STM32F1 | |
| elif [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then | |
| arduino-cli core install multi4in1:STM32F1 | |
| fi | |
| chmod +x ${GITHUB_WORKSPACE}/buildroot/bin/* | |
| echo "${GITHUB_WORKSPACE}/buildroot/bin" >> $GITHUB_PATH | |
| mkdir ./build | |
| mkdir ./binaries | |
| - name: Configure MULTI-Module firmware options | |
| run: | | |
| # Load the build functions | |
| source ./buildroot/bin/buildFunctions; | |
| # Get the version | |
| getMultiVersion | |
| echo "MULTI_VERSION=$(echo $MULTI_VERSION)" >> $GITHUB_ENV | |
| # Get all the protocols for this board | |
| getAllProtocols | |
| echo "A7105_PROTOCOLS=$(echo $A7105_PROTOCOLS)" >> $GITHUB_ENV | |
| echo "CC2500_PROTOCOLS=$(echo $CC2500_PROTOCOLS)" >> $GITHUB_ENV | |
| echo "CYRF6936_PROTOCOLS=$(echo $CYRF6936_PROTOCOLS)" >> $GITHUB_ENV | |
| echo "NRF24L01_PROTOCOLS=$(echo $NRF24L01_PROTOCOLS)" >> $GITHUB_ENV | |
| echo "SX1276_PROTOCOLS=$(echo $SX1276_PROTOCOLS)" >> $GITHUB_ENV | |
| echo "CCNRF_INO_PROTOCOLS=$(echo $CCNRF_INO_PROTOCOLS)" >> $GITHUB_ENV | |
| echo "ALL_PROTOCOLS=$(echo $ALL_PROTOCOLS)" >> $GITHUB_ENV | |
| # Get all the RF modules for this board | |
| getAllRFModules | |
| echo "ALL_RFMODULES=$(echo $ALL_RFMODULES)" >> $GITHUB_ENV | |
| # Disable CHECK_FOR_BOOTLOADER when not needed | |
| if [[ "$BOARD" =~ ":avr:multiatmega328p:bootloader=none" ]]; then | |
| opt_disable CHECK_FOR_BOOTLOADER; | |
| fi | |
| # Trim the build down for the Atmega328p board | |
| if [[ "$BOARD" =~ ":avr:multiatmega328p:" ]]; then | |
| opt_disable $ALL_PROTOCOLS | |
| opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO; | |
| fi | |
| # Trim the enabled protocols down for the STM32F103CB board with debugging or the STM32F103C8 board in general | |
| if [[ "$BOARD" =~ ":STM32F1:multistm32f103cb:debug_option=ftdi" ]] || [[ "$BOARD" =~ ":STM32F1:multistm32f103cb:debug_option=native" ]] || [[ "$BOARD" =~ ":STM32F1:multistm32f103c8" ]]; then | |
| opt_disable $ALL_PROTOCOLS; | |
| opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO; | |
| fi | |
| - name: Save default firmware configuration | |
| run: | | |
| cat Multiprotocol/_Config.h | |
| cp Multiprotocol/_Config.h ./_Config.h.bak | |
| - name: Build default configuration | |
| run: | | |
| # Skip the default build for boards where it's too large now | |
| if [[ "$BOARD" =~ ":STM32F1:multistm32f103cb:debug_option=none" ]] || [[ "$BOARD" =~ ":STM32F1:multi5in1t18int" ]]; then | |
| printf "Not testing default build for $BOARD."; | |
| else | |
| source ./buildroot/bin/buildFunctions; | |
| buildMulti | |
| fi | |
| - name: Build serial only | |
| run: | | |
| source ./buildroot/bin/buildFunctions; | |
| cp ./_Config.h.bak Multiprotocol/_Config.h | |
| opt_disable ENABLE_PPM; | |
| buildMulti; | |
| - name: Build PPM only | |
| run: | | |
| source ./buildroot/bin/buildFunctions; | |
| cp ./_Config.h.bak Multiprotocol/_Config.h | |
| opt_disable ENABLE_SERIAL; | |
| buildMulti; | |
| - name: Build each RF module individually | |
| run: | | |
| source ./buildroot/bin/buildFunctions; | |
| cp ./_Config.h.bak Multiprotocol/_Config.h; | |
| buildEachRFModule; | |
| - name: Build each protocol individually | |
| run: | | |
| source ./buildroot/bin/buildFunctions; | |
| cp ./_Config.h.bak Multiprotocol/_Config.h; | |
| buildEachProtocol; | |
| - name: Build release files | |
| run: | | |
| source ./buildroot/bin/buildFunctions; | |
| cp ./_Config.h.bak Multiprotocol/_Config.h; | |
| buildReleaseFiles; | |
| ls -al ./binaries; | |
| NUM_FILES=$(ls -l ./binaries | grep ^- | wc -l); | |
| if [ $NUM_FILES -gt 0 ]; then | |
| echo "HAVE_FILES=true" >> $GITHUB_ENV | |
| else | |
| echo "HAVE_FILES=false" >> $GITHUB_ENV | |
| fi | |
| - name: Deploy files to release | |
| if: github.event_name == 'release' && github.event.action == 'created' && env.HAVE_FILES == 'true' | |
| uses: AButler/[email protected] | |
| with: | |
| files: './binaries/*' | |
| repo-token: ${{ secrets.GITHUB_TOKEN }} | |
| - name: 'Upload Artifacts' | |
| if: env.HAVE_FILES == 'true' | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: multi-test-build | |
| path: ./binaries/ |