readme

README.md

@@ -1 +1,62 @@
-# WeatherMeters
+# Weather Meters
+Arduino library for processing wind speed, wind wane and rain gauge sensors (WH 1080, Sparkfun)
+
+It's interupt based library with callbacks and ready to use on any board. The only difference accros boards would be in initializing 1 second timer, ie. on STM32 you could use RTC timer, ESP32 has its own timer object, Timer1 could be used Arduino Uno (ATmega328P) etc.
+
+# Example on STM32 platform
+
+```cpp
+#include <RTClock.h>
+#include "WeatherMeters.h"
+
+#define anemometer_pin PB12
+#define windvane_pin PB1
+#define raingauge_pin PB14
+
+#define SAMPLES 8 // = 8 sec output
+
+volatile bool got_data = false;
+
+RTClock rtclock(RTCSEL_LSE);
+WeatherMeters meters(windvane_pin, SAMPLES);
+
+void intAnemometer() {
+    meters.intAnemometer();
+}
+
+void intRaingauge() {
+    meters.intRaingauge();
+}
+
+void secondCount() {
+    meters.secondCount();
+}
+
+void readDone(void) {
+    got_data = true;
+}
+
+void setup() {
+    Serial.begin(115200);
+
+    attachInterrupt(digitalPinToInterrupt(anemometer_pin), intAnemometer, FALLING);
+    attachInterrupt(digitalPinToInterrupt(raingauge_pin), intRaingauge, FALLING);
+    meters.attach(readDone);
+    rtclock.attachSecondsInterrupt(secondCount);
+
+    meters.init();
+}
+
+void loop() {
+    if (got_data) {
+        got_data = false;
+        Serial.print("Wind degrees: ");
+        Serial.print(meters.getWindVane(), 1);
+        Serial.print(" Wind speed: ");
+        Serial.print(meters.getWindSpeed(), 1);
+        Serial.print("km/h, Rain: ");
+        Serial.print(meters.getRainGauge(), 4);
+        Serial.println("mm");
+    }
+}
+```