尚不支持最新RVV指令 #4

xingmingjie · 2020-06-24T03:32:56Z

目前使用qemu官方仓库构建的版本，尚不支持最新RVV指令。

对于如下代码片段：

riscv64-unknown-elf-objdump -d a.out >& a.dump

0000000000010250 <loop>:
   10250:       0c3672d7                vsetvli t0,a2,e8,m8,ta,ma,d1
   10254:       02058007                vle8.v  v0,(a1)
   10258:       005585b3                add     a1,a1,t0
   1025c:       40560633                sub     a2,a2,t0
   10260:       02068027                vse8.v  v0,(a3)
   10264:       005686b3                add     a3,a3,t0
   10268:       fe0614e3                bnez    a2,10250 <loop>
   1026c:       00008067                ret

运行qemu，会报Illegal instruction错误：

qemu-riscv64 test-memcpy
Illegal instruction (core dumped)

The text was updated successfully, but these errors were encountered:

Similarly to commit 158b659 with the APB PnP registers, guests can crash QEMU when writting to the AHB PnP registers: $ echo 'writeb 0xfffff042 69' | qemu-system-sparc -M leon3_generic -S -bios /etc/magic -qtest stdio [I 1571938309.932255] OPENED [R +0.063474] writeb 0xfffff042 69 Segmentation fault (core dumped) (gdb) bt #0 0x0000000000000000 in () #1 0x0000562999110df4 in memory_region_write_with_attrs_accessor (mr=mr@entry=0x56299aa28ea0, addr=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, shift=<optimized out>, mask=mask@entry=255, attrs=...) at memory.c:503 #2 0x000056299911095e in access_with_adjusted_size (addr=addr@entry=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=access_fn@entry= 0x562999110d70 <memory_region_write_with_attrs_accessor>, mr=0x56299aa28ea0, attrs=...) at memory.c:539 #3 0x0000562999114fba in memory_region_dispatch_write (mr=mr@entry=0x56299aa28ea0, addr=66, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at memory.c:1482 #4 0x00005629990c0860 in flatview_write_continue (fv=fv@entry=0x56299aa7d8a0, addr=addr@entry=4294963266, attrs=..., ptr=ptr@entry=0x7fff6abe1540, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x56299aa28ea0) at include/qemu/host-utils.h:164 #5 0x00005629990c0a76 in flatview_write (fv=0x56299aa7d8a0, addr=4294963266, attrs=..., buf=0x7fff6abe1540, len=1) at exec.c:3165 #6 0x00005629990c4c1b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7fff6abe1540, len=len@entry=1) at exec.c:3256 #7 0x000056299910f807 in qtest_process_command (chr=chr@entry=0x5629995ee920 <qtest_chr>, words=words@entry=0x56299acfcfa0) at qtest.c:437 Instead of crashing, log the access as unimplemented. Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: KONRAD Frederic <[email protected]> Message-Id: <[email protected]>

During testing of the vhost-user-blk reconnect functionality the qemu SIGSEGV was triggered: start qemu as: x86_64-softmmu/qemu-system-x86_64 -m 1024M -M q35 \ -object memory-backend-file,id=ram-node0,size=1024M,mem-path=/dev/shm/qemu,share=on \ -numa node,cpus=0,memdev=ram-node0 \ -chardev socket,id=chardev0,path=./vhost.sock,noserver,reconnect=1 \ -device vhost-user-blk-pci,chardev=chardev0,num-queues=4 --enable-kvm start vhost-user-blk daemon: ./vhost-user-blk -s ./vhost.sock -b test-img.raw If vhost-user-blk will be killed during the vhost initialization process, for instance after getting VHOST_SET_VRING_CALL command, then QEMU will fail with the following backtrace: Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault. 0x00005555559272bb in vhost_user_read (dev=0x7fffef2d53e0, msg=0x7fffffffd5b0) at ./hw/virtio/vhost-user.c:260 260 CharBackend *chr = u->user->chr; #0 0x00005555559272bb in vhost_user_read (dev=0x7fffef2d53e0, msg=0x7fffffffd5b0) at ./hw/virtio/vhost-user.c:260 #1 0x000055555592acb8 in vhost_user_get_config (dev=0x7fffef2d53e0, config=0x7fffef2d5394 "", config_len=60) at ./hw/virtio/vhost-user.c:1645 #2 0x0000555555925525 in vhost_dev_get_config (hdev=0x7fffef2d53e0, config=0x7fffef2d5394 "", config_len=60) at ./hw/virtio/vhost.c:1490 #3 0x00005555558cc46b in vhost_user_blk_device_realize (dev=0x7fffef2d51a0, errp=0x7fffffffd8f0) at ./hw/block/vhost-user-blk.c:429 #4 0x0000555555920090 in virtio_device_realize (dev=0x7fffef2d51a0, errp=0x7fffffffd948) at ./hw/virtio/virtio.c:3615 #5 0x0000555555a9779c in device_set_realized (obj=0x7fffef2d51a0, value=true, errp=0x7fffffffdb88) at ./hw/core/qdev.c:891 ... The problem is that vhost_user_write doesn't get an error after disconnect and try to call vhost_user_read(). The tcp_chr_write() routine should return -1 in case of disconnect. Indicate the EIO error if this routine is called in the disconnected state. Signed-off-by: Dima Stepanov <[email protected]> Reviewed-by: Marc-André Lureau <[email protected]> Message-Id: <aeb7806bfc945faadf09f64dcfa30f59de3ac053.1590396396.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

When we hotplug vcpus, cpu_update_state is added to vm_change_state_head in kvm_arch_init_vcpu(). But it forgot to delete in kvm_arch_destroy_vcpu() after unplug. Then it will cause a use-after-free access. This patch delete it in kvm_arch_destroy_vcpu() to fix that. Reproducer: virsh setvcpus vm1 4 --live virsh setvcpus vm1 2 --live virsh suspend vm1 virsh resume vm1 The UAF stack: ==qemu-system-x86_64==28233==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e00002e798 at pc 0x5573c6917d9e bp 0x7fff07139e50 sp 0x7fff07139e40 WRITE of size 1 at 0x62e00002e798 thread T0 #0 0x5573c6917d9d in cpu_update_state /mnt/sdb/qemu/target/i386/kvm.c:742 #1 0x5573c699121a in vm_state_notify /mnt/sdb/qemu/vl.c:1290 #2 0x5573c636287e in vm_prepare_start /mnt/sdb/qemu/cpus.c:2144 #3 0x5573c6362927 in vm_start /mnt/sdb/qemu/cpus.c:2150 #4 0x5573c71e8304 in qmp_cont /mnt/sdb/qemu/monitor/qmp-cmds.c:173 #5 0x5573c727cb1e in qmp_marshal_cont qapi/qapi-commands-misc.c:835 #6 0x5573c7694c7a in do_qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:132 #7 0x5573c7694c7a in qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:175 #8 0x5573c71d9110 in monitor_qmp_dispatch /mnt/sdb/qemu/monitor/qmp.c:145 #9 0x5573c71dad4f in monitor_qmp_bh_dispatcher /mnt/sdb/qemu/monitor/qmp.c:234 Reported-by: Euler Robot <[email protected]> Signed-off-by: Pan Nengyuan <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Message-Id: <[email protected]> Reviewed-by: Igor Mammedov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

Trying libFuzzer on the vmport device, we get: AddressSanitizer:DEADLYSIGNAL ================================================================= ==29476==ERROR: AddressSanitizer: SEGV on unknown address 0x000000008840 (pc 0x56448bec4d79 bp 0x7ffeec9741b0 sp 0x7ffeec9740e0 T0) ==29476==The signal is caused by a READ memory access. #0 0x56448bec4d78 in vmport_ioport_read (qemu-fuzz-i386+0x1260d78) #1 0x56448bb5f175 in memory_region_read_accessor (qemu-fuzz-i386+0xefb175) #2 0x56448bb30c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13) #3 0x56448bb2ea27 in memory_region_dispatch_read1 (qemu-fuzz-i386+0xecaa27) #4 0x56448bb2e443 in memory_region_dispatch_read (qemu-fuzz-i386+0xeca443) #5 0x56448b961ab1 in flatview_read_continue (qemu-fuzz-i386+0xcfdab1) #6 0x56448b96336d in flatview_read (qemu-fuzz-i386+0xcff36d) #7 0x56448b962ec4 in address_space_read_full (qemu-fuzz-i386+0xcfeec4) This is easily reproducible using: $ echo inb 0x5658 | qemu-system-i386 -M isapc,accel=qtest -qtest stdio [I 1589796572.009763] OPENED [R +0.008069] inb 0x5658 Segmentation fault (core dumped) $ coredumpctl gdb -q Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77 77 eax = env->regs[R_EAX]; (gdb) p cpu $1 = (X86CPU *) 0x0 (gdb) bt #0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77 #1 0x00005605b53db114 in memory_region_read_accessor (mr=0x5605b7531d80, addr=0, value=0x7ffc9d261a30, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:434 #2 0x00005605b53db5d4 in access_with_adjusted_size (addr=0, value=0x7ffc9d261a30, size=1, access_size_min=4, access_size_max=4, access_fn= 0x5605b53db0d2 <memory_region_read_accessor>, mr=0x5605b7531d80, attrs=...) at memory.c:544 #3 0x00005605b53de156 in memory_region_dispatch_read1 (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, size=1, attrs=...) at memory.c:1396 #4 0x00005605b53de228 in memory_region_dispatch_read (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, op=MO_8, attrs=...) at memory.c:1424 #5 0x00005605b537c80a in flatview_read_continue (fv=0x5605b7650290, addr=22104, attrs=..., ptr=0x7ffc9d261b4b, len=1, addr1=0, l=1, mr=0x5605b7531d80) at exec.c:3200 #6 0x00005605b537c95d in flatview_read (fv=0x5605b7650290, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3239 #7 0x00005605b537c9e6 in address_space_read_full (as=0x5605b5f74ac0 <address_space_io>, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3252 #8 0x00005605b53d5a5d in address_space_read (len=1, buf=0x7ffc9d261b4b, attrs=..., addr=22104, as=0x5605b5f74ac0 <address_space_io>) at include/exec/memory.h:2401 #9 0x00005605b53d5a5d in cpu_inb (addr=22104) at ioport.c:88 X86CPU is NULL because QTest accelerator does not use CPU. Fix by returning default values when QTest accelerator is used. Reported-by: Clang AddressSanitizer Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

On restart, we were scheduling a BH to process queued requests, which would run before starting up the data plane, leading to those requests being assigned and started on coroutines on the main context. This could cause requests to be wrongly processed in parallel from different threads (the main thread and the iothread managing the data plane), potentially leading to multiple issues. For example, stopping and resuming a VM multiple times while the guest is generating I/O on a virtio_blk device can trigger a crash with a stack tracing looking like this one: <------> Thread 2 (Thread 0x7ff736765700 (LWP 1062503)): #0 0x00005567a13b99d6 in iov_memset (iov=0x6563617073206f4e, iov_cnt=1717922848, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:69 #1 0x00005567a13bab73 in qemu_iovec_memset (qiov=0x7ff73ec99748, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:530 #2 0x00005567a12f411c in qemu_laio_process_completion (laiocb=0x7ff6512ee6c0) at block/linux-aio.c:86 #3 0x00005567a12f42ff in qemu_laio_process_completions (s=0x7ff7182e8420) at block/linux-aio.c:217 #4 0x00005567a12f480d in ioq_submit (s=0x7ff7182e8420) at block/linux-aio.c:323 #5 0x00005567a12f43d9 in qemu_laio_process_completions_and_submit (s=0x7ff7182e8420) at block/linux-aio.c:236 #6 0x00005567a12f44c2 in qemu_laio_poll_cb (opaque=0x7ff7182e8430) at block/linux-aio.c:267 #7 0x00005567a13aed83 in run_poll_handlers_once (ctx=0x5567a2b58c70, timeout=0x7ff7367645f8) at util/aio-posix.c:520 #8 0x00005567a13aee9f in run_poll_handlers (ctx=0x5567a2b58c70, max_ns=16000, timeout=0x7ff7367645f8) at util/aio-posix.c:562 #9 0x00005567a13aefde in try_poll_mode (ctx=0x5567a2b58c70, timeout=0x7ff7367645f8) at util/aio-posix.c:597 #10 0x00005567a13af115 in aio_poll (ctx=0x5567a2b58c70, blocking=true) at util/aio-posix.c:639 #11 0x00005567a109acca in iothread_run (opaque=0x5567a2b29760) at iothread.c:75 #12 0x00005567a13b2790 in qemu_thread_start (args=0x5567a2b694c0) at util/qemu-thread-posix.c:519 #13 0x00007ff73eedf2de in start_thread () at /lib64/libpthread.so.0 #14 0x00007ff73ec10e83 in clone () at /lib64/libc.so.6 Thread 1 (Thread 0x7ff743986f00 (LWP 1062500)): #0 0x00005567a13b99d6 in iov_memset (iov=0x6563617073206f4e, iov_cnt=1717922848, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:69 #1 0x00005567a13bab73 in qemu_iovec_memset (qiov=0x7ff73ec99748, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:530 #2 0x00005567a12f411c in qemu_laio_process_completion (laiocb=0x7ff6512ee6c0) at block/linux-aio.c:86 #3 0x00005567a12f42ff in qemu_laio_process_completions (s=0x7ff7182e8420) at block/linux-aio.c:217 #4 0x00005567a12f480d in ioq_submit (s=0x7ff7182e8420) at block/linux-aio.c:323 #5 0x00005567a12f4a2f in laio_do_submit (fd=19, laiocb=0x7ff5f4ff9ae0, offset=472363008, type=2) at block/linux-aio.c:375 #6 0x00005567a12f4af2 in laio_co_submit (bs=0x5567a2b8c460, s=0x7ff7182e8420, fd=19, offset=472363008, qiov=0x7ff5f4ff9ca0, type=2) at block/linux-aio.c:394 #7 0x00005567a12f1803 in raw_co_prw (bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, type=2) at block/file-posix.c:1892 #8 0x00005567a12f1941 in raw_co_pwritev (bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, flags=0) at block/file-posix.c:1925 #9 0x00005567a12fe3e1 in bdrv_driver_pwritev (bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, qiov_offset=0, flags=0) at block/io.c:1183 #10 0x00005567a1300340 in bdrv_aligned_pwritev (child=0x5567a2b5b070, req=0x7ff5f4ff9db0, offset=472363008, bytes=20480, align=512, qiov=0x7ff72c0425b8, qiov_offset=0, flags=0) at block/io.c:1980 #11 0x00005567a1300b29 in bdrv_co_pwritev_part (child=0x5567a2b5b070, offset=472363008, bytes=20480, qiov=0x7ff72c0425b8, qiov_offset=0, flags=0) at block/io.c:2137 #12 0x00005567a12baba1 in qcow2_co_pwritev_task (bs=0x5567a2b92740, file_cluster_offset=472317952, offset=487305216, bytes=20480, qiov=0x7ff72c0425b8, qiov_offset=0, l2meta=0x0) at block/qcow2.c:2444 #13 0x00005567a12bacdb in qcow2_co_pwritev_task_entry (task=0x5567a2b48540) at block/qcow2.c:2475 #14 0x00005567a13167d8 in aio_task_co (opaque=0x5567a2b48540) at block/aio_task.c:45 qemu#15 0x00005567a13cf00c in coroutine_trampoline (i0=738245600, i1=32759) at util/coroutine-ucontext.c:115 qemu#16 0x00007ff73eb622e0 in __start_context () at /lib64/libc.so.6 qemu#17 0x00007ff6626f1350 in () qemu#18 0x0000000000000000 in () <------> This is also known to cause crashes with this message (assertion failed): aio_co_schedule: Co-routine was already scheduled in 'aio_co_schedule' RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1812765 Signed-off-by: Sergio Lopez <[email protected]> Message-Id: <[email protected]> Signed-off-by: Kevin Wolf <[email protected]>

'obj' forgot to free at the end of hmp_qom_get(). Fix that. The leak stack: Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f4e3a779ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8) #1 0x7f4e398f91d5 in g_malloc (/lib64/libglib-2.0.so.0+0x531d5) #2 0x55c9fd9a3999 in qstring_from_substr /build/qemu/src/qobject/qstring.c:45 #3 0x55c9fd894bd3 in qobject_output_type_str /build/qemu/src/qapi/qobject-output-visitor.c:175 #4 0x55c9fd894bd3 in qobject_output_type_str /build/qemu/src/qapi/qobject-output-visitor.c:168 #5 0x55c9fd88b34d in visit_type_str /build/qemu/src/qapi/qapi-visit-core.c:308 #6 0x55c9fd59aa6b in property_get_str /build/qemu/src/qom/object.c:2064 #7 0x55c9fd5adb8a in object_property_get_qobject /build/qemu/src/qom/qom-qobject.c:38 #8 0x55c9fd4a029d in hmp_qom_get /build/qemu/src/qom/qom-hmp-cmds.c:66 Fixes: 89cf4fe Reported-by: Euler Robot <[email protected]> Signed-off-by: Pan Nengyuan <[email protected]> Message-Id: <[email protected]> Reviewed-by: Li Qiang <[email protected]> Tested-by: Li Qiang <[email protected]> Signed-off-by: Dr. David Alan Gilbert <[email protected]>

Since commit d70c996, when enabling the PMU we get: $ qemu-system-aarch64 -cpu host,pmu=on -M virt,accel=kvm,gic-version=3 Segmentation fault (core dumped) Thread 1 "qemu-system-aar" received signal SIGSEGV, Segmentation fault. 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588 2588 ret = ioctl(s->fd, type, arg); (gdb) bt #0 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588 #1 0x0000aaaaaae31568 in kvm_check_extension (s=0x0, extension=126) at accel/kvm/kvm-all.c:916 #2 0x0000aaaaaafce254 in kvm_arm_pmu_supported (cpu=0xaaaaac214ab0) at target/arm/kvm.c:213 #3 0x0000aaaaaafc0f94 in arm_set_pmu (obj=0xaaaaac214ab0, value=true, errp=0xffffffffe438) at target/arm/cpu.c:1111 #4 0x0000aaaaab5533ac in property_set_bool (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", opaque=0xaaaaac222730, errp=0xffffffffe438) at qom/object.c:2170 #5 0x0000aaaaab5512f0 in object_property_set (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1328 #6 0x0000aaaaab551e10 in object_property_parse (obj=0xaaaaac214ab0, string=0xaaaaac11b4c0 "on", name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1561 #7 0x0000aaaaab54ee8c in object_apply_global_props (obj=0xaaaaac214ab0, props=0xaaaaac018e20, errp=0xaaaaabd6fd88 <error_fatal>) at qom/object.c:407 #8 0x0000aaaaab1dd5a4 in qdev_prop_set_globals (dev=0xaaaaac214ab0) at hw/core/qdev-properties.c:1218 #9 0x0000aaaaab1d9fac in device_post_init (obj=0xaaaaac214ab0) at hw/core/qdev.c:1050 ... qemu#15 0x0000aaaaab54f310 in object_initialize_with_type (obj=0xaaaaac214ab0, size=52208, type=0xaaaaabe237f0) at qom/object.c:512 qemu#16 0x0000aaaaab54fa24 in object_new_with_type (type=0xaaaaabe237f0) at qom/object.c:687 qemu#17 0x0000aaaaab54fa80 in object_new (typename=0xaaaaabe23970 "host-arm-cpu") at qom/object.c:702 qemu#18 0x0000aaaaaaf04a74 in machvirt_init (machine=0xaaaaac0a8550) at hw/arm/virt.c:1770 qemu#19 0x0000aaaaab1e8720 in machine_run_board_init (machine=0xaaaaac0a8550) at hw/core/machine.c:1138 qemu#20 0x0000aaaaaaf95394 in qemu_init (argc=5, argv=0xffffffffea58, envp=0xffffffffea88) at softmmu/vl.c:4348 qemu#21 0x0000aaaaaada3f74 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at softmmu/main.c:48 This is because in frame #2, cpu->kvm_state is still NULL (the vCPU is not yet realized). KVM has a hard requirement of all cores supporting the same feature set. We only need to check if the accelerator supports a feature, not each vCPU individually. Fix by removing the 'CPUState *cpu' argument from the kvm_arm_<FEATURE>_supported() functions. Fixes: d70c996 ('Use CPUState::kvm_state in kvm_arm_pmu_supported') Reported-by: Haibo Xu <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Acked-by: Paolo Bonzini <[email protected]> Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

When adding the generic PCA955xClass in commit 736132e, we forgot to set the class_size field. Fill it now to avoid: (gdb) run -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf Starting program: ../../qemu/qemu/arm-softmmu/qemu-system-arm -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf double free or corruption (!prev) Thread 1 "qemu-system-arm" received signal SIGABRT, Aborted. __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 (gdb) where #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007ffff75d8859 in __GI_abort () at abort.c:79 #2 0x00007ffff76433ee in __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7ffff776d285 "%s\n") at ../sysdeps/posix/libc_fatal.c:155 #3 0x00007ffff764b47c in malloc_printerr (str=str@entry=0x7ffff776f690 "double free or corruption (!prev)") at malloc.c:5347 #4 0x00007ffff764d12c in _int_free (av=0x7ffff779eb80 <main_arena>, p=0x5555567a3990, have_lock=<optimized out>) at malloc.c:4317 #5 0x0000555555c906c3 in type_initialize_interface (ti=ti@entry=0x5555565b8f40, interface_type=0x555556597ad0, parent_type=0x55555662ca10) at qom/object.c:259 #6 0x0000555555c902da in type_initialize (ti=ti@entry=0x5555565b8f40) at qom/object.c:323 #7 0x0000555555c90d20 in type_initialize (ti=0x5555565b8f40) at qom/object.c:1028 $ valgrind --track-origins=yes qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf ==77479== Memcheck, a memory error detector ==77479== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==77479== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info ==77479== Command: qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf ==77479== ==77479== Invalid write of size 2 ==77479== at 0x6D8322: pca9552_class_init (pca9552.c:424) ==77479== by 0x844D1F: type_initialize (object.c:1029) ==77479== by 0x844D1F: object_class_foreach_tramp (object.c:1016) ==77479== by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2) ==77479== by 0x8453A4: object_class_foreach (object.c:1038) ==77479== by 0x8453A4: object_class_get_list (object.c:1095) ==77479== by 0x556194: select_machine (vl.c:2416) ==77479== by 0x556194: qemu_init (vl.c:3828) ==77479== by 0x40AF9C: main (main.c:48) ==77479== Address 0x583f108 is 0 bytes after a block of size 200 alloc'd ==77479== at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so) ==77479== by 0x4AF8D30: g_malloc0 (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2) ==77479== by 0x844258: type_initialize.part.0 (object.c:306) ==77479== by 0x844D1F: type_initialize (object.c:1029) ==77479== by 0x844D1F: object_class_foreach_tramp (object.c:1016) ==77479== by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2) ==77479== by 0x8453A4: object_class_foreach (object.c:1038) ==77479== by 0x8453A4: object_class_get_list (object.c:1095) ==77479== by 0x556194: select_machine (vl.c:2416) ==77479== by 0x556194: qemu_init (vl.c:3828) ==77479== by 0x40AF9C: main (main.c:48) Fixes: 736132e ("hw/misc/pca9552: Add generic PCA955xClass") Reported-by: Jean-Christophe DUBOIS <[email protected]> Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Tested-by: Jean-Christophe DUBOIS <[email protected]> Message-id: [email protected] Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

lazyparser · 2020-07-04T13:36:38Z

已经开始。估计3个观察点之后可以看到一些结果。

直接按照 v1.0 的标准来进行。

virtio_net_device_realize() rejects invalid duplex and speed values. The error handling is broken: $ ../qemu/bld-sani/x86_64-softmmu/qemu-system-x86_64 -S -display none -monitor stdio QEMU 4.2.93 monitor - type 'help' for more information (qemu) device_add virtio-net,duplex=x Error: 'duplex' must be 'half' or 'full' (qemu) c ================================================================= ==15654==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000014590 at pc 0x560b75c8dc13 bp 0x7fffdf1a6950 sp 0x7fffdf1a6940 READ of size 8 at 0x62e000014590 thread T0 #0 0x560b75c8dc12 in object_dynamic_cast_assert /work/armbru/qemu/qom/object.c:826 #1 0x560b74c38ac0 in virtio_vmstate_change /work/armbru/qemu/hw/virtio/virtio.c:3210 #2 0x560b74d9765e in vm_state_notify /work/armbru/qemu/softmmu/vl.c:1271 #3 0x560b7494ba72 in vm_prepare_start /work/armbru/qemu/cpus.c:2156 #4 0x560b7494bacd in vm_start /work/armbru/qemu/cpus.c:2162 #5 0x560b75a7d890 in qmp_cont /work/armbru/qemu/monitor/qmp-cmds.c:160 #6 0x560b75a8d70a in hmp_cont /work/armbru/qemu/monitor/hmp-cmds.c:1043 #7 0x560b75a799f2 in handle_hmp_command /work/armbru/qemu/monitor/hmp.c:1082 [...] 0x62e000014590 is located 33168 bytes inside of 42288-byte region [0x62e00000c400,0x62e000016930) freed by thread T1 here: #0 0x7feadd39491f in __interceptor_free (/lib64/libasan.so.5+0x10d91f) #1 0x7feadcebcd7c in g_free (/lib64/libglib-2.0.so.0+0x55d7c) #2 0x560b75c8fd40 in object_unref /work/armbru/qemu/qom/object.c:1128 #3 0x560b7498a625 in memory_region_unref /work/armbru/qemu/memory.c:1762 #4 0x560b74999fa4 in do_address_space_destroy /work/armbru/qemu/memory.c:2788 #5 0x560b762362fc in call_rcu_thread /work/armbru/qemu/util/rcu.c:283 #6 0x560b761c8884 in qemu_thread_start /work/armbru/qemu/util/qemu-thread-posix.c:519 #7 0x7fead9be34bf in start_thread (/lib64/libpthread.so.0+0x84bf) previously allocated by thread T0 here: #0 0x7feadd394d18 in __interceptor_malloc (/lib64/libasan.so.5+0x10dd18) #1 0x7feadcebcc88 in g_malloc (/lib64/libglib-2.0.so.0+0x55c88) #2 0x560b75c8cf8a in object_new /work/armbru/qemu/qom/object.c:699 #3 0x560b75010ad9 in qdev_device_add /work/armbru/qemu/qdev-monitor.c:654 #4 0x560b750120c2 in qmp_device_add /work/armbru/qemu/qdev-monitor.c:805 #5 0x560b75012c1b in hmp_device_add /work/armbru/qemu/qdev-monitor.c:905 [...] ==15654==ABORTING Cause: virtio_net_device_realize() neglects to bail out after setting the error. Fix that. Fixes: 9473939 Cc: "Michael S. Tsirkin" <[email protected]> Cc: Jason Wang <[email protected]> Signed-off-by: Markus Armbruster <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Message-Id: <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]>

liweiwei90 · 2020-08-07T12:38:04Z

RVV是实验选项，默认是不支持，需要加上-cpu rv64，x-v=true

tries to fix a leak detected when building with --enable-sanitizers: ./i386-softmmu/qemu-system-i386 Upon exit: ==13576==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1216 byte(s) in 1 object(s) allocated from: #0 0x7f9d2ed5c628 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5) #1 0x7f9d2e963500 in g_malloc (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.) #2 0x55fa646d25cc in object_new_with_type /tmp/qemu/qom/object.c:686 #3 0x55fa63dbaa88 in qdev_new /tmp/qemu/hw/core/qdev.c:140 #4 0x55fa638a533f in pc_pflash_create /tmp/qemu/hw/i386/pc_sysfw.c:88 #5 0x55fa638a54c4 in pc_system_flash_create /tmp/qemu/hw/i386/pc_sysfw.c:106 #6 0x55fa646caa1d in object_init_with_type /tmp/qemu/qom/object.c:369 #7 0x55fa646d20b5 in object_initialize_with_type /tmp/qemu/qom/object.c:511 #8 0x55fa646d2606 in object_new_with_type /tmp/qemu/qom/object.c:687 #9 0x55fa639431e9 in qemu_init /tmp/qemu/softmmu/vl.c:3878 #10 0x55fa6335c1b8 in main /tmp/qemu/softmmu/main.c:48 #11 0x7f9d2cf06e0a in __libc_start_main ../csu/libc-start.c:308 #12 0x55fa6335f8e9 in _start (/tmp/qemu/build/i386-softmmu/qemu-system-i386) Signed-off-by: Alexander Bulekov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

…tart When the disconnect event is triggered in the connecting stage, the tcp_chr_disconnect_locked may be called twice. The first call: #0 qemu_chr_socket_restart_timer (chr=0x55555582ee90) at chardev/char-socket.c:120 #1 0x000055555558e38c in tcp_chr_disconnect_locked (chr=<optimized out>) at chardev/char-socket.c:490 #2 0x000055555558e3cd in tcp_chr_disconnect (chr=0x55555582ee90) at chardev/char-socket.c:497 #3 0x000055555558ea32 in tcp_chr_new_client (chr=chr@entry=0x55555582ee90, sioc=sioc@entry=0x55555582f0b0) at chardev/char-socket.c:892 #4 0x000055555558eeb8 in qemu_chr_socket_connected (task=0x55555582f300, opaque=<optimized out>) at chardev/char-socket.c:1090 #5 0x0000555555574352 in qio_task_complete (task=task@entry=0x55555582f300) at io/task.c:196 #6 0x00005555555745f4 in qio_task_thread_result (opaque=0x55555582f300) at io/task.c:111 #7 qio_task_wait_thread (task=0x55555582f300) at io/task.c:190 #8 0x000055555558f17e in tcp_chr_wait_connected (chr=0x55555582ee90, errp=0x555555802a08 <error_abort>) at chardev/char-socket.c:1013 #9 0x0000555555567cbd in char_socket_client_reconnect_test (opaque=0x5555557fe020 <client8unix>) at tests/test-char.c:1152 The second call: #0 0x00007ffff5ac3277 in raise () from /lib64/libc.so.6 #1 0x00007ffff5ac4968 in abort () from /lib64/libc.so.6 #2 0x00007ffff5abc096 in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff5abc142 in __assert_fail () from /lib64/libc.so.6 #4 0x000055555558d10a in qemu_chr_socket_restart_timer (chr=0x55555582ee90) at chardev/char-socket.c:125 #5 0x000055555558df0c in tcp_chr_disconnect_locked (chr=<optimized out>) at chardev/char-socket.c:490 #6 0x000055555558df4d in tcp_chr_disconnect (chr=0x55555582ee90) at chardev/char-socket.c:497 #7 0x000055555558e5b2 in tcp_chr_new_client (chr=chr@entry=0x55555582ee90, sioc=sioc@entry=0x55555582f0b0) at chardev/char-socket.c:892 #8 0x000055555558e93a in tcp_chr_connect_client_sync (chr=chr@entry=0x55555582ee90, errp=errp@entry=0x7fffffffd178) at chardev/char-socket.c:944 #9 0x000055555558ec78 in tcp_chr_wait_connected (chr=0x55555582ee90, errp=0x555555802a08 <error_abort>) at chardev/char-socket.c:1035 #10 0x000055555556804b in char_socket_client_test (opaque=0x5555557fe020 <client8unix>) at tests/test-char.c:1023 Run test/test-char to reproduce this issue. test-char: chardev/char-socket.c:125: qemu_chr_socket_restart_timer: Assertion `!s->reconnect_timer' failed. Signed-off-by: Li Feng <[email protected]> Acked-by: Marc-André Lureau <[email protected]> Message-Id: <[email protected]>

With a reconnect socket, qemu_char_open() will start a background thread. It should keep a reference on the chardev. Fixes invalid read: READ of size 8 at 0x6040000ac858 thread T7 #0 0x5555598d37b8 in unix_connect_saddr /home/elmarco/src/qq/util/qemu-sockets.c:954 #1 0x5555598d4751 in socket_connect /home/elmarco/src/qq/util/qemu-sockets.c:1109 #2 0x555559707c34 in qio_channel_socket_connect_sync /home/elmarco/src/qq/io/channel-socket.c:145 #3 0x5555596adebb in tcp_chr_connect_client_task /home/elmarco/src/qq/chardev/char-socket.c:1104 #4 0x555559723d55 in qio_task_thread_worker /home/elmarco/src/qq/io/task.c:123 #5 0x5555598a6731 in qemu_thread_start /home/elmarco/src/qq/util/qemu-thread-posix.c:519 #6 0x7ffff40d4431 in start_thread (/lib64/libpthread.so.0+0x9431) #7 0x7ffff40029d2 in __clone (/lib64/libc.so.6+0x1019d2) Signed-off-by: Marc-André Lureau <[email protected]> Reviewed-by: Daniel P. Berrangé <[email protected]> Message-Id: <[email protected]>

"tmp.tls_hostname" and "tmp.tls_creds" allocated by migrate_params_test_apply() is forgot to free at the end of qmp_migrate_set_parameters(). Fix that. The leak stack: Direct leak of 2 byte(s) in 2 object(s) allocated from: #0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b) #1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b) #2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143) #3 0xaaaac52447fb in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1377) #4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192) #5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c:165) #6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125) #7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214) #8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117) #9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459) #10 0xaaaac55cae0f in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268) #11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b) #12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b) #13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb) #14 0xaaaac47f45ef(/usr/bin/qemu-kvm-4.1.0+0x8455ef) qemu#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f) qemu#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb) Direct leak of 2 byte(s) in 2 object(s) allocated from: #0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b) #1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b) #2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143) #3 0xaaaac5244893 in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1382) #4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192) #5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c) #6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125) #7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214) #8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117) #9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459) #10 0xaaaac55cae0f in in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268) #11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b) #12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b) #13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb) #14 0xaaaac47f45ef (/usr/bin/qemu-kvm-4.1.0+0x8455ef) qemu#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f) qemu#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb) Signed-off-by: Chuan Zheng <[email protected]> Reviewed-by: KeQian Zhu <[email protected]> Reviewed-by: HaiLiang <[email protected]> Reviewed-by: Juan Quintela <[email protected]> Signed-off-by: Juan Quintela <[email protected]>

bdrv_aio_cancel() calls aio_poll() on the AioContext for the given I/O request until it has completed. ENOMEDIUM requests are special because there is no BlockDriverState when the drive has no medium! Define a .get_aio_context() function for BlkAioEmAIOCB requests so that bdrv_aio_cancel() can find the AioContext where the completion BH is pending. Without this function bdrv_aio_cancel() aborts on ENOMEDIUM requests! libFuzzer triggered the following assertion: cat << EOF | qemu-system-i386 -M pc-q35-5.0 \ -nographic -monitor none -serial none \ -qtest stdio -trace ide\* outl 0xcf8 0x8000fa24 outl 0xcfc 0xe106c000 outl 0xcf8 0x8000fa04 outw 0xcfc 0x7 outl 0xcf8 0x8000fb20 write 0x0 0x3 0x2780e7 write 0xe106c22c 0xd 0x1130c218021130c218021130c2 write 0xe106c218 0x15 0x110010110010110010110010110010110010110010 EOF ide_exec_cmd IDE exec cmd: bus 0x56170a77a2b8; state 0x56170a77a340; cmd 0xe7 ide_reset IDEstate 0x56170a77a340 Aborted (core dumped) (gdb) bt #1 0x00007ffff4f93895 in abort () at /lib64/libc.so.6 #2 0x0000555555dc6c00 in bdrv_aio_cancel (acb=0x555556765550) at block/io.c:2745 #3 0x0000555555dac202 in blk_aio_cancel (acb=0x555556765550) at block/block-backend.c:1546 #4 0x0000555555b1bd74 in ide_reset (s=0x555557213340) at hw/ide/core.c:1318 #5 0x0000555555b1e3a1 in ide_bus_reset (bus=0x5555572132b8) at hw/ide/core.c:2422 #6 0x0000555555b2aa27 in ahci_reset_port (s=0x55555720eb50, port=2) at hw/ide/ahci.c:650 #7 0x0000555555b29fd7 in ahci_port_write (s=0x55555720eb50, port=2, offset=44, val=16) at hw/ide/ahci.c:360 #8 0x0000555555b2a564 in ahci_mem_write (opaque=0x55555720eb50, addr=556, val=16, size=1) at hw/ide/ahci.c:513 #9 0x000055555598415b in memory_region_write_accessor (mr=0x55555720eb80, addr=556, value=0x7fffffffb838, size=1, shift=0, mask=255, attrs=...) at softmmu/memory.c:483 Looking at bdrv_aio_cancel: 2728 /* async I/Os */ 2729 2730 void bdrv_aio_cancel(BlockAIOCB *acb) 2731 { 2732 qemu_aio_ref(acb); 2733 bdrv_aio_cancel_async(acb); 2734 while (acb->refcnt > 1) { 2735 if (acb->aiocb_info->get_aio_context) { 2736 aio_poll(acb->aiocb_info->get_aio_context(acb), true); 2737 } else if (acb->bs) { 2738 /* qemu_aio_ref and qemu_aio_unref are not thread-safe, so 2739 * assert that we're not using an I/O thread. Thread-safe 2740 * code should use bdrv_aio_cancel_async exclusively. 2741 */ 2742 assert(bdrv_get_aio_context(acb->bs) == qemu_get_aio_context()); 2743 aio_poll(bdrv_get_aio_context(acb->bs), true); 2744 } else { 2745 abort(); <=============== 2746 } 2747 } 2748 qemu_aio_unref(acb); 2749 } Fixes: 02c50ef ("block: Add bdrv_aio_cancel_async") Reported-by: Alexander Bulekov <[email protected]> Buglink: https://bugs.launchpad.net/qemu/+bug/1878255 Originally-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Stefan Hajnoczi <[email protected]> Message-Id: <[email protected]> Signed-off-by: Max Reitz <[email protected]>

To make deallocating partially constructed objects work, the visit_type_STRUCT() need to succeed without doing anything when passed a null object. Commit cdd2b22 "qapi: Smooth visitor error checking in generated code" broke that. To reproduce, run tests/test-qobject-input-visitor with AddressSanitizer: ==4353==ERROR: LeakSanitizer: detected memory leaks Direct leak of 16 byte(s) in 1 object(s) allocated from: #0 0x7f192d0c5d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28) #1 0x7f192cd21b10 in g_malloc0 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x51b10) #2 0x556725f6bbee in visit_next_list qapi/qapi-visit-core.c:86 #3 0x556725f49e15 in visit_type_UserDefOneList tests/test-qapi-visit.c:474 #4 0x556725f4489b in test_visitor_in_fail_struct_in_list tests/test-qobject-input-visitor.c:1086 #5 0x7f192cd42f29 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72f29) SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s). Test case /visitor/input/fail/struct-in-list feeds a list with a bad element to the QObject input visitor. Visiting that element duly fails, and aborts the visit with the list only partially constructed: the faulty object is null. Cleaning up the partially constructed list visits that null object, fails, and aborts the visit before the list node gets freed. Fix the the generated visit_type_STRUCT() to succeed for null objects. Fixes: cdd2b22 Reported-by: Li Qiang <[email protected]> Signed-off-by: Markus Armbruster <[email protected]> Message-Id: <[email protected]> Tested-by: Li Qiang <[email protected]> Reviewed-by: Li Qiang <[email protected]>

In legacy mode, virtio_pci_queue_enabled() falls back to virtio_queue_enabled() to know if the queue is enabled. But virtio_queue_enabled() calls again virtio_pci_queue_enabled() if k->queue_enabled is set. This ends in a crash after a stack overflow. The problem can be reproduced with "-device virtio-net-pci,disable-legacy=off,disable-modern=true -net tap,vhost=on" And a look to the backtrace is very explicit: ... #4 0x000000010029a438 in virtio_queue_enabled () #5 0x0000000100497a9c in virtio_pci_queue_enabled () ... #130902 0x000000010029a460 in virtio_queue_enabled () #130903 0x0000000100497a9c in virtio_pci_queue_enabled () #130904 0x000000010029a460 in virtio_queue_enabled () #130905 0x0000000100454a20 in vhost_net_start () ... This patch fixes the problem by introducing a new function for the legacy case and calls it from virtio_pci_queue_enabled(). It also calls it from virtio_queue_enabled() to avoid code duplication. Fixes: f19bcdf ("virtio-pci: implement queue_enabled method") Cc: Jason Wang <[email protected]> Cc: Cindy Lu <[email protected]> CC: Michael S. Tsirkin <[email protected]> Signed-off-by: Laurent Vivier <[email protected]> Message-Id: <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

It should be safe to reenter qio_channel_yield() on io/channel read/write path, so it's safe to reduce in_flight and allow attaching new aio context. And no problem to allow drain itself: connection attempt is not a guest request. Moreover, if remote server is down, we can hang in negotiation, blocking drain section and provoking a dead lock. How to reproduce the dead lock: 1. Create nbd-fault-injector.conf with the following contents: [inject-error "mega1"] event=data io=readwrite when=before 2. In one terminal run nbd-fault-injector in a loop, like this: n=1; while true; do echo $n; ((n++)); ./nbd-fault-injector.py 127.0.0.1:10000 nbd-fault-injector.conf; done 3. In another terminal run qemu-io in a loop, like this: n=1; while true; do echo $n; ((n++)); ./qemu-io -c 'read 0 512' nbd://127.0.0.1:10000; done After some time, qemu-io will hang trying to drain, for example, like this: #3 aio_poll (ctx=0x55f006bdd890, blocking=true) at util/aio-posix.c:600 #4 bdrv_do_drained_begin (bs=0x55f006bea710, recursive=false, parent=0x0, ignore_bds_parents=false, poll=true) at block/io.c:427 #5 bdrv_drained_begin (bs=0x55f006bea710) at block/io.c:433 #6 blk_drain (blk=0x55f006befc80) at block/block-backend.c:1710 #7 blk_unref (blk=0x55f006befc80) at block/block-backend.c:498 #8 bdrv_open_inherit (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000", reference=0x0, options=0x55f006be86d0, flags=24578, parent=0x0, child_class=0x0, child_role=0, errp=0x7fffba154620) at block.c:3491 #9 bdrv_open (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000", reference=0x0, options=0x0, flags=16386, errp=0x7fffba154620) at block.c:3513 #10 blk_new_open (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000", reference=0x0, options=0x0, flags=16386, errp=0x7fffba154620) at block/block-backend.c:421 And connection_co stack like this: #0 qemu_coroutine_switch (from_=0x55f006bf2650, to_=0x7fe96e07d918, action=COROUTINE_YIELD) at util/coroutine-ucontext.c:302 #1 qemu_coroutine_yield () at util/qemu-coroutine.c:193 #2 qio_channel_yield (ioc=0x55f006bb3c20, condition=G_IO_IN) at io/channel.c:472 #3 qio_channel_readv_all_eof (ioc=0x55f006bb3c20, iov=0x7fe96d729bf0, niov=1, errp=0x7fe96d729eb0) at io/channel.c:110 #4 qio_channel_readv_all (ioc=0x55f006bb3c20, iov=0x7fe96d729bf0, niov=1, errp=0x7fe96d729eb0) at io/channel.c:143 #5 qio_channel_read_all (ioc=0x55f006bb3c20, buf=0x7fe96d729d28 "\300.\366\004\360U", buflen=8, errp=0x7fe96d729eb0) at io/channel.c:247 #6 nbd_read (ioc=0x55f006bb3c20, buffer=0x7fe96d729d28, size=8, desc=0x55f004f69644 "initial magic", errp=0x7fe96d729eb0) at /work/src/qemu/master/include/block/nbd.h:365 #7 nbd_read64 (ioc=0x55f006bb3c20, val=0x7fe96d729d28, desc=0x55f004f69644 "initial magic", errp=0x7fe96d729eb0) at /work/src/qemu/master/include/block/nbd.h:391 #8 nbd_start_negotiate (aio_context=0x55f006bdd890, ioc=0x55f006bb3c20, tlscreds=0x0, hostname=0x0, outioc=0x55f006bf19f8, structured_reply=true, zeroes=0x7fe96d729dca, errp=0x7fe96d729eb0) at nbd/client.c:904 #9 nbd_receive_negotiate (aio_context=0x55f006bdd890, ioc=0x55f006bb3c20, tlscreds=0x0, hostname=0x0, outioc=0x55f006bf19f8, info=0x55f006bf1a00, errp=0x7fe96d729eb0) at nbd/client.c:1032 #10 nbd_client_connect (bs=0x55f006bea710, errp=0x7fe96d729eb0) at block/nbd.c:1460 #11 nbd_reconnect_attempt (s=0x55f006bf19f0) at block/nbd.c:287 #12 nbd_co_reconnect_loop (s=0x55f006bf19f0) at block/nbd.c:309 #13 nbd_connection_entry (opaque=0x55f006bf19f0) at block/nbd.c:360 #14 coroutine_trampoline (i0=113190480, i1=22000) at util/coroutine-ucontext.c:173 Note, that the hang may be triggered by another bug, so the whole case is fixed only together with commit "block/nbd: on shutdown terminate connection attempt". Signed-off-by: Vladimir Sementsov-Ogievskiy <[email protected]> Message-Id: <[email protected]> Reviewed-by: Eric Blake <[email protected]> Signed-off-by: Eric Blake <[email protected]>

When 'j = icu->nr_sense – 1', the 'j < icu->nr_sense' condition is true, then 'j = icu->nr_sense', the'icu->init_sense[j]' has out-of-bounds access. The asan showed stack: ERROR: AddressSanitizer: heap-buffer-overflow on address 0x604000004d7d at pc 0x55852cd26a76 bp 0x7ffe39f26200 sp 0x7ffe39f261f0 READ of size 1 at 0x604000004d7d thread T0 #0 0x55852cd26a75 in rxicu_realize ../hw/intc/rx_icu.c:311 #1 0x55852cf075f7 in device_set_realized ../hw/core/qdev.c:886 #2 0x55852cd4a32f in property_set_bool ../qom/object.c:2251 #3 0x55852cd4f9bb in object_property_set ../qom/object.c:1398 #4 0x55852cd54f3f in object_property_set_qobject ../qom/qom-qobject.c:28 #5 0x55852cd4fc3f in object_property_set_bool ../qom/object.c:1465 #6 0x55852cbf0b27 in register_icu ../hw/rx/rx62n.c:156 #7 0x55852cbf12a6 in rx62n_realize ../hw/rx/rx62n.c:261 #8 0x55852cf075f7 in device_set_realized ../hw/core/qdev.c:886 #9 0x55852cd4a32f in property_set_bool ../qom/object.c:2251 #10 0x55852cd4f9bb in object_property_set ../qom/object.c:1398 #11 0x55852cd54f3f in object_property_set_qobject ../qom/qom-qobject.c:28 #12 0x55852cd4fc3f in object_property_set_bool ../qom/object.c:1465 #13 0x55852cbf1a85 in rx_gdbsim_init ../hw/rx/rx-gdbsim.c:109 #14 0x55852cd22de0 in qemu_init ../softmmu/vl.c:4380 qemu#15 0x55852ca57088 in main ../softmmu/main.c:49 qemu#16 0x7feefafa5d42 in __libc_start_main (/lib64/libc.so.6+0x26d42) Add the 'ice->src[i].sense' initialize to the default value, and then process init_sense array to identify which irqs should be level-triggered. Suggested-by: Peter Maydell <[email protected]> Reported-by: Euler Robot <[email protected]> Signed-off-by: Chen Qun <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Message-id: [email protected] Signed-off-by: Peter Maydell <[email protected]>

Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <[email protected]> Message-Id: <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

When running device-introspect-test, a memory leak occurred in the s390_cpu_initfn function, this patch use timer_free() in the finalize function to fix it. ASAN shows memory leak stack: Direct leak of 3552 byte(s) in 74 object(s) allocated from: #0 0xfffeb3d4e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xfffeb36e6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaad51a8f9c4 in timer_new_full qemu/include/qemu/timer.h:523 #3 0xaaad51a8f9c4 in timer_new qemu/include/qemu/timer.h:544 #4 0xaaad51a8f9c4 in timer_new_ns qemu/include/qemu/timer.h:562 #5 0xaaad51a8f9c4 in s390_cpu_initfn qemu/target/s390x/cpu.c:304 #6 0xaaad51e00f58 in object_init_with_type qemu/qom/object.c:371 #7 0xaaad51e0406c in object_initialize_with_type qemu/qom/object.c:515 #8 0xaaad51e042e0 in object_new_with_type qemu/qom/object.c:729 #9 0xaaad51e3ff40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153 #10 0xaaad51910518 in qdev_device_help qemu/softmmu/qdev-monitor.c:283 #11 0xaaad51911918 in qmp_device_add qemu/softmmu/qdev-monitor.c:801 #12 0xaaad51911e48 in hmp_device_add qemu/softmmu/qdev-monitor.c:916 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Message-Id: <[email protected]> Signed-off-by: Cornelia Huck <[email protected]>

When running qom-test, a memory leak occurred in the ppce500_init function, this patch free irqs array to fix it. ASAN shows memory leak stack: Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0xfffc5ceee1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xfffc5c806800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaacf9999244 in ppce500_init qemu/hw/ppc/e500.c:859 #3 0xaaacf97434e8 in machine_run_board_init qemu/hw/core/machine.c:1134 #4 0xaaacf9c9475c in qemu_init qemu/softmmu/vl.c:4369 #5 0xaaacf94785a0 in main qemu/softmmu/main.c:49 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Message-Id: <[email protected]> Signed-off-by: David Gibson <[email protected]>

In host_memory_backend_get_host_nodes, we build host_nodes list and output it to v (a StringOutputVisitor) but forget to free the list. This fixes the memory leak. The memory leak stack: Direct leak of 32 byte(s) in 2 object(s) allocated from: #0 0xfffda30b3393 in __interceptor_calloc (/usr/lib64/libasan.so.4+0xd3393) #1 0xfffda1d28b9b in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x58b9b) #2 0xaaab05ca6e43 in host_memory_backend_get_host_nodes backends/hostmem.c:94 #3 0xaaab061ddf83 in object_property_get_uint16List qom/object.c:1478 #4 0xaaab05866513 in query_memdev hw/core/machine-qmp-cmds.c:312 #5 0xaaab061d980b in do_object_child_foreach qom/object.c:1001 #6 0xaaab0586779b in qmp_query_memdev hw/core/machine-qmp-cmds.c:328 #7 0xaaab0615ed3f in qmp_marshal_query_memdev qapi/qapi-commands-machine.c:327 #8 0xaaab0632d647 in do_qmp_dispatch qapi/qmp-dispatch.c:147 #9 0xaaab0632d647 in qmp_dispatch qapi/qmp-dispatch.c:190 #10 0xaaab0610f74b in monitor_qmp_dispatch monitor/qmp.c:120 #11 0xaaab0611074b in monitor_qmp_bh_dispatcher monitor/qmp.c:209 #12 0xaaab063caefb in aio_bh_poll util/async.c:117 #13 0xaaab063d30fb in aio_dispatch util/aio-posix.c:459 #14 0xaaab063cac8f in aio_ctx_dispatch util/async.c:268 qemu#15 0xfffda1d22a6b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a6b) qemu#16 0xaaab063d0e97 in glib_pollfds_poll util/main-loop.c:218 qemu#17 0xaaab063d0e97 in os_host_main_loop_wait util/main-loop.c:241 qemu#18 0xaaab063d0e97 in main_loop_wait util/main-loop.c:517 qemu#19 0xaaab05c8bfa7 in main_loop /root/rpmbuild/BUILD/qemu-4.1.0/vl.c:1791 qemu#20 0xaaab05713bc3 in main /root/rpmbuild/BUILD/qemu-4.1.0/vl.c:4473 qemu#21 0xfffda0a83ebf in __libc_start_main (/usr/lib64/libc.so.6+0x23ebf) qemu#22 0xaaab0571ed5f (aarch64-softmmu/qemu-system-aarch64+0x88ed5f) SUMMARY: AddressSanitizer: 32 byte(s) leaked in 2 allocation(s). Fixes: 4cf1b76 (hostmem: add properties for NUMA memory policy) Reported-by: Euler Robot <[email protected]> Signed-off-by: Keqian Zhu <[email protected]> Tested-by: Chen Qun <[email protected]> Reviewed-by: Igor Mammedov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Eduardo Habkost <[email protected]>

…eaks When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

…d memleaks When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

…emleaks When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

…emleaks When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <[email protected]> Signed-off-by: Gan Qixin <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>

In commit 00f05c0 we gave the TYPE_XLNX_CSU_DMA object its own class struct, but forgot to update the TypeInfo::class_size accordingly. This meant that not enough memory was allocated for the class struct, and the initialization of xcdc->read in the class init function wrote off the end of the memory. Add the missing line. Found by running 'check-qtest-aarch64' with a clang address-sanitizer build, which complains: ==2542634==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61000000ab00 at pc 0x559a20aebc29 bp 0x7fff97df74d0 sp 0x7fff97df74c8 WRITE of size 8 at 0x61000000ab00 thread T0 #0 0x559a20aebc28 in xlnx_csu_dma_class_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../hw/dma/xlnx_csu_dma.c:722:16 #1 0x559a21bf297c in type_initialize /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:365:9 #2 0x559a21bf3442 in object_class_foreach_tramp /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1070:5 #3 0x7f09bcb641b7 in g_hash_table_foreach (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x401b7) #4 0x559a21bf3c27 in object_class_foreach /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1092:5 #5 0x559a21bf3c27 in object_class_get_list /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1149:5 #6 0x559a2081a2fd in select_machine /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/vl.c:1661:24 #7 0x559a2081a2fd in qemu_create_machine /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/vl.c:2146:35 #8 0x559a2081a2fd in qemu_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/vl.c:3706:5 #9 0x559a20720ed5 in main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/main.c:49:5 #10 0x7f09baec00b2 in __libc_start_main /build/glibc-sMfBJT/glibc-2.31/csu/../csu/libc-start.c:308:16 #11 0x559a2067673d in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/qemu-system-aarch64+0xf4b73d) 0x61000000ab00 is located 0 bytes to the right of 192-byte region [0x61000000aa40,0x61000000ab00) allocated by thread T0 here: #0 0x559a206eeff2 in calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/qemu-system-aarch64+0xfc3ff2) #1 0x7f09bcb7bef0 in g_malloc0 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57ef0) #2 0x559a21bf3442 in object_class_foreach_tramp /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1070:5 Fixes: 00f05c0 ("hw/dma/xlnx_csu_dma: Support starting a read transfer through a class method") Signed-off-by: Peter Maydell <[email protected]> Reviewed-by: Francisco Iglesias <[email protected]> Reviewed-by: Edgar E. Iglesias <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Message-id: [email protected]

Include the qtest reproducer provided by Alexander Bulekov in https://gitlab.com/qemu-project/qemu/-/issues/542. Without the previous commit, we get: $ make check-qtest-i386 ... Running test tests/qtest/intel-hda-test AddressSanitizer:DEADLYSIGNAL ================================================================= ==1580408==ERROR: AddressSanitizer: stack-overflow on address 0x7ffc3d566fe0 #0 0x63d297cf in address_space_translate_internal softmmu/physmem.c:356 #1 0x63d27260 in flatview_do_translate softmmu/physmem.c:499:15 #2 0x63d27af5 in flatview_translate softmmu/physmem.c:565:15 #3 0x63d4ce84 in flatview_write softmmu/physmem.c:2850:10 #4 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18 #5 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16 #6 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #7 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12 #8 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12 #9 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1 #10 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1 #11 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12 #12 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5 #13 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5 #14 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5 qemu#15 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9 qemu#16 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5 qemu#17 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9 qemu#18 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5 qemu#19 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5 qemu#20 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18 qemu#21 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16 qemu#22 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23 qemu#23 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12 qemu#24 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18 qemu#25 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16 qemu#26 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 qemu#27 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12 qemu#28 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12 qemu#29 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1 qemu#30 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1 qemu#31 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12 qemu#32 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5 qemu#33 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5 qemu#34 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5 qemu#35 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9 qemu#36 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5 qemu#37 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9 qemu#38 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5 qemu#39 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5 qemu#40 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18 qemu#41 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16 qemu#42 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23 qemu#43 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12 qemu#44 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18 qemu#45 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16 qemu#46 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 qemu#47 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12 qemu#48 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12 ... SUMMARY: AddressSanitizer: stack-overflow softmmu/physmem.c:356 in address_space_translate_internal ==1580408==ABORTING Broken pipe Aborted (core dumped) Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Acked-by: Thomas Huth <[email protected]> Message-Id: <[email protected]> Signed-off-by: Thomas Huth <[email protected]>

The issue reported by OSS-Fuzz produces the following backtrace: ==447470==ERROR: AddressSanitizer: heap-buffer-overflow READ of size 1 at 0x61500002a080 thread T0 #0 0x71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18 #1 0x7175f139 in sdhci_read hw/sd/sdhci.c:1022:19 #2 0x721b937b in memory_region_read_accessor softmmu/memory.c:440:11 #3 0x72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 #4 0x7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16 #5 0x7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9 #6 0x7212db5d in flatview_read_continue softmmu/physmem.c:2879:23 #7 0x7212f958 in flatview_read softmmu/physmem.c:2921:12 #8 0x7212f418 in address_space_read_full softmmu/physmem.c:2934:18 #9 0x721305a9 in address_space_rw softmmu/physmem.c:2962:16 #10 0x7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #11 0x7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12 #12 0x71759684 in dma_memory_read include/sysemu/dma.h:152:12 #13 0x7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27 #14 0x7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13 qemu#15 0x7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9 qemu#16 0x717629ee in sdhci_write hw/sd/sdhci.c:1212:9 qemu#17 0x72172513 in memory_region_write_accessor softmmu/memory.c:492:5 qemu#18 0x72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 qemu#19 0x72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16 qemu#20 0x721419ee in flatview_write_continue softmmu/physmem.c:2812:23 qemu#21 0x721301eb in flatview_write softmmu/physmem.c:2854:12 qemu#22 0x7212fca8 in address_space_write softmmu/physmem.c:2950:18 qemu#23 0x721d9a53 in qtest_process_command softmmu/qtest.c:727:9 A DMA descriptor is previously filled in RAM. An I/O access to the device (frames qemu#22 to qemu#16) start the DMA engine (frame #13). The engine fetch the descriptor and execute the request, which itself accesses the SDHCI I/O registers (frame #1 and #0), triggering a re-entrancy issue. Fix by prohibit transactions from the DMA to devices. The DMA engine is thus restricted to memories. Reported-by: OSS-Fuzz (Issue 36391) Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Thomas Huth <[email protected]> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/451 Message-Id: <[email protected]> Signed-off-by: Thomas Huth <[email protected]>

Include the qtest reproducer provided by Alexander Bulekov in https://gitlab.com/qemu-project/qemu/-/issues/451. Without the previous commit, we get: $ make check-qtest-i386 ... Running test qtest-i386/fuzz-sdcard-test ==447470==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61500002a080 at pc 0x564c71766d48 bp 0x7ffc126c62b0 sp 0x7ffc126c62a8 READ of size 1 at 0x61500002a080 thread T0 #0 0x564c71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18 #1 0x564c7175f139 in sdhci_read hw/sd/sdhci.c:1022:19 #2 0x564c721b937b in memory_region_read_accessor softmmu/memory.c:440:11 #3 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 #4 0x564c7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16 #5 0x564c7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9 #6 0x564c7212db5d in flatview_read_continue softmmu/physmem.c:2879:23 #7 0x564c7212f958 in flatview_read softmmu/physmem.c:2921:12 #8 0x564c7212f418 in address_space_read_full softmmu/physmem.c:2934:18 #9 0x564c721305a9 in address_space_rw softmmu/physmem.c:2962:16 #10 0x564c7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #11 0x564c7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12 #12 0x564c71759684 in dma_memory_read include/sysemu/dma.h:152:12 #13 0x564c7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27 #14 0x564c7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13 qemu#15 0x564c7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9 qemu#16 0x564c717629ee in sdhci_write hw/sd/sdhci.c:1212:9 qemu#17 0x564c72172513 in memory_region_write_accessor softmmu/memory.c:492:5 qemu#18 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 qemu#19 0x564c72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16 qemu#20 0x564c721419ee in flatview_write_continue softmmu/physmem.c:2812:23 qemu#21 0x564c721301eb in flatview_write softmmu/physmem.c:2854:12 qemu#22 0x564c7212fca8 in address_space_write softmmu/physmem.c:2950:18 qemu#23 0x564c721d9a53 in qtest_process_command softmmu/qtest.c:727:9 0x61500002a080 is located 0 bytes to the right of 512-byte region [0x615000029e80,0x61500002a080) allocated by thread T0 here: #0 0x564c708e1737 in __interceptor_calloc (qemu-system-i386+0x1e6a737) #1 0x7ff05567b5e0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x5a5e0) #2 0x564c71774adb in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5 SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:474:18 in sdhci_read_dataport Shadow bytes around the buggy address: 0x0c2a7fffd3c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c2a7fffd3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c2a7fffd3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c2a7fffd3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c2a7fffd400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c2a7fffd410:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c2a7fffd420: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd430: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd440: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd450: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd460: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Heap left redzone: fa Freed heap region: fd ==447470==ABORTING Broken pipe ERROR qtest-i386/fuzz-sdcard-test - too few tests run (expected 3, got 2) Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Acked-by: Thomas Huth <[email protected]> Message-Id: <[email protected]> [thuth: Replaced "-m 4G" with "-m 512M"] Signed-off-by: Thomas Huth <[email protected]>

Since commit 0439c5a ("block/block-backend.c: assertions for block-backend") QEMU crashes when using Cocoa on Darwin hosts. Example on macOS: $ qemu-system-i386 Assertion failed: (qemu_in_main_thread()), function blk_all_next, file block-backend.c, line 552. Abort trap: 6 Looking with lldb: Assertion failed: (qemu_in_main_thread()), function blk_all_next, file block-backend.c, line 552. Process 76914 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert frame #4: 0x000000010057c2d4 qemu-system-i386`blk_all_next.cold.1 at block-backend.c:552:5 [opt] 549 */ 550 BlockBackend *blk_all_next(BlockBackend *blk) 551 { --> 552 GLOBAL_STATE_CODE(); 553 return blk ? QTAILQ_NEXT(blk, link) 554 : QTAILQ_FIRST(&block_backends); 555 } Target 1: (qemu-system-i386) stopped. (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert frame #0: 0x00000001908c99b8 libsystem_kernel.dylib`__pthread_kill + 8 frame #1: 0x00000001908fceb0 libsystem_pthread.dylib`pthread_kill + 288 frame #2: 0x000000019083a314 libsystem_c.dylib`abort + 164 frame #3: 0x000000019083972c libsystem_c.dylib`__assert_rtn + 300 * frame #4: 0x000000010057c2d4 qemu-system-i386`blk_all_next.cold.1 at block-backend.c:552:5 [opt] frame #5: 0x00000001003c00b4 qemu-system-i386`blk_all_next(blk=<unavailable>) at block-backend.c:552:5 [opt] frame #6: 0x00000001003d8f04 qemu-system-i386`qmp_query_block(errp=0x0000000000000000) at qapi.c:591:16 [opt] frame #7: 0x000000010003ab0c qemu-system-i386`main [inlined] addRemovableDevicesMenuItems at cocoa.m:1756:21 [opt] frame #8: 0x000000010003ab04 qemu-system-i386`main(argc=<unavailable>, argv=<unavailable>) at cocoa.m:1980:5 [opt] frame #9: 0x00000001012690f4 dyld`start + 520 As we are in passed release 7.0 hard freeze, disable the block backend assertion which, while being valuable during development, is not helpful to users. We'll restore this assertion immediately once 7.0 is released and work on a fix. Suggested-by: Akihiko Odaki <[email protected]> Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Akihiko Odaki <[email protected]> Reviewed-by: Peter Maydell <[email protected]> Message-Id: <[email protected]>

Add the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/339 Without the previous commit, when running 'make check-qtest-i386' with QEMU configured with '--enable-sanitizers' we get: ==4028352==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x619000062a00 at pc 0x5626d03c491a bp 0x7ffdb4199410 sp 0x7ffdb4198bc0 READ of size 786432 at 0x619000062a00 thread T0 #0 0x5626d03c4919 in __asan_memcpy (qemu-system-i386+0x1e65919) #1 0x5626d1c023cc in flatview_write_continue softmmu/physmem.c:2787:13 #2 0x5626d1bf0c0f in flatview_write softmmu/physmem.c:2822:14 #3 0x5626d1bf0798 in address_space_write softmmu/physmem.c:2914:18 #4 0x5626d1bf0f37 in address_space_rw softmmu/physmem.c:2924:16 #5 0x5626d1bf14c8 in cpu_physical_memory_rw softmmu/physmem.c:2933:5 #6 0x5626d0bd5649 in cpu_physical_memory_write include/exec/cpu-common.h:82:5 #7 0x5626d0bd0a07 in i8257_dma_write_memory hw/dma/i8257.c:452:9 #8 0x5626d09f825d in fdctrl_transfer_handler hw/block/fdc.c:1616:13 #9 0x5626d0a048b4 in fdctrl_start_transfer hw/block/fdc.c:1539:13 #10 0x5626d09f4c3e in fdctrl_write_data hw/block/fdc.c:2266:13 #11 0x5626d09f22f7 in fdctrl_write hw/block/fdc.c:829:9 #12 0x5626d1c20bc5 in portio_write softmmu/ioport.c:207:17 0x619000062a00 is located 0 bytes to the right of 512-byte region [0x619000062800,0x619000062a00) allocated by thread T0 here: #0 0x5626d03c66ec in posix_memalign (qemu-system-i386+0x1e676ec) #1 0x5626d2b988d4 in qemu_try_memalign util/oslib-posix.c:210:11 #2 0x5626d2b98b0c in qemu_memalign util/oslib-posix.c:226:27 #3 0x5626d09fbaf0 in fdctrl_realize_common hw/block/fdc.c:2341:20 #4 0x5626d0a150ed in isabus_fdc_realize hw/block/fdc-isa.c:113:5 #5 0x5626d2367935 in device_set_realized hw/core/qdev.c:531:13 SUMMARY: AddressSanitizer: heap-buffer-overflow (qemu-system-i386+0x1e65919) in __asan_memcpy Shadow bytes around the buggy address: 0x0c32800044f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c3280004540:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004550: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Heap left redzone: fa Freed heap region: fd ==4028352==ABORTING [ kwolf: Added snapshot=on to prevent write file lock failure ] Reported-by: Alexander Bulekov <[email protected]> Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Alexander Bulekov <[email protected]> Signed-off-by: Kevin Wolf <[email protected]>

the code in pcibus_get_fw_dev_path contained the potential for a stack buffer overflow of 1 byte, potentially writing to the stack an extra NUL byte. This overflow could happen if the PCI slot is >= 0x10000000, and the PCI function is >= 0x10000000, due to the size parameter of snprintf being incorrectly calculated in the call: if (PCI_FUNC(d->devfn)) snprintf(path + off, sizeof(path) + off, ",%x", PCI_FUNC(d->devfn)); since the off obtained from a previous call to snprintf is added instead of subtracted from the total available size of the buffer. Without the accurate size guard from snprintf, we end up writing in the worst case: name (32) + "@" (1) + SLOT (8) + "," (1) + FUNC (8) + term NUL (1) = 51 bytes In order to provide something more robust, replace all of the code in pcibus_get_fw_dev_path with a single call to g_strdup_printf, so there is no need to rely on manual calculations. Found by compiling QEMU with FORTIFY_SOURCE=3 as the error: *** buffer overflow detected ***: terminated Thread 1 "qemu-system-x86" received signal SIGABRT, Aborted. [Switching to Thread 0x7ffff642c380 (LWP 121307)] 0x00007ffff71ff55c in __pthread_kill_implementation () from /lib64/libc.so.6 (gdb) bt #0 0x00007ffff71ff55c in __pthread_kill_implementation () at /lib64/libc.so.6 #1 0x00007ffff71ac6f6 in raise () at /lib64/libc.so.6 #2 0x00007ffff7195814 in abort () at /lib64/libc.so.6 #3 0x00007ffff71f279e in __libc_message () at /lib64/libc.so.6 #4 0x00007ffff729767a in __fortify_fail () at /lib64/libc.so.6 #5 0x00007ffff7295c36 in () at /lib64/libc.so.6 #6 0x00007ffff72957f5 in __snprintf_chk () at /lib64/libc.so.6 #7 0x0000555555b1c1fd in pcibus_get_fw_dev_path () #8 0x0000555555f2bde4 in qdev_get_fw_dev_path_helper.constprop () #9 0x0000555555f2bd86 in qdev_get_fw_dev_path_helper.constprop () #10 0x00005555559a6e5d in get_boot_device_path () #11 0x00005555559a712c in get_boot_devices_list () #12 0x0000555555b1a3d0 in fw_cfg_machine_reset () #13 0x0000555555bf4c2d in pc_machine_reset () #14 0x0000555555c66988 in qemu_system_reset () qemu#15 0x0000555555a6dff6 in qdev_machine_creation_done () qemu#16 0x0000555555c79186 in qmp_x_exit_preconfig.part () qemu#17 0x0000555555c7b459 in qemu_init () qemu#18 0x0000555555960a29 in main () Found-by: Dario Faggioli <Dario Faggioli <[email protected]> Found-by: Martin Liška <[email protected]> Cc: [email protected] Signed-off-by: Claudio Fontana <[email protected]> Message-Id: <[email protected]> Reviewed-by: Ani Sinha <[email protected]>

In two places in gdbstub.c we look at gdbserver_state.init to decide whether we're going to do a semihosting syscall via the gdb remote protocol: * when setting up, if the user didn't explicitly select either native semihosting or gdb semihosting, we autoselect, with the intended behaviour "use gdb if gdb is connected" * when the semihosting layer attempts to do a syscall via gdb, we silently ignore it if the gdbstub wasn't actually set up However, if the user's commandline sets up the gdbstub but tells QEMU to start rather than waiting for a GDB to connect (eg using '-s' but not '-S'), then we will have gdbserver_state.init true but no actual connection; an attempt to use gdb syscalls will then crash because we try to use gdbserver_state.c_cpu when it hasn't been set up: #0 0x00007ffff6803ba8 in qemu_cpu_kick (cpu=0x0) at ../../softmmu/cpus.c:457 #1 0x00007ffff6c03913 in gdb_do_syscallv (cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b7e "", va=0x7ffff56294c0) at ../../gdbstub.c:2946 #2 0x00007ffff6c19c3a in common_semi_gdb_syscall (cs=0x7ffff83fe060, cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b75 "isatty,%x") at ../../semihosting/arm-compat-semi.c:494 #3 0x00007ffff6c1a064 in gdb_isattyfn (cs=0x7ffff83fe060, gf=0x7ffff86a3690) at ../../semihosting/arm-compat-semi.c:636 #4 0x00007ffff6c1b20f in do_common_semihosting (cs=0x7ffff83fe060) at ../../semihosting/arm-compat-semi.c:967 #5 0x00007ffff693a037 in handle_semihosting (cs=0x7ffff83fe060) at ../../target/arm/helper.c:10316 You can probably also get into this state via some odd corner cases involving connecting a GDB and then telling it to detach from all the vCPUs. Abstract out the test into a new gdb_attached() function which returns true only if there's actually a GDB connected to the debug stub and attached to at least one vCPU. Reported-by: Liviu Ionescu <[email protected]> Signed-off-by: Peter Maydell <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Luc Michel <[email protected]> Message-id: [email protected]

There is such error info when running linux kernel: tcg_handle_interrupt: assertion failed: (qemu_mutex_iothread_locked()). calling stack: #0 in raise () at /lib64/libc.so.6 #1 in abort () at /lib64/libc.so.6 #2 in g_assertion_message_expr.cold () at /lib64/libglib-2.0.so.0 #3 in g_assertion_message_expr () at /lib64/libglib-2.0.so.0 #4 in tcg_handle_interrupt (cpu=0x632000030800, mask=2) at ../accel/tcg/tcg-accel-ops.c:79 #5 in cpu_interrupt (cpu=0x632000030800, mask=2) at ../softmmu/cpus.c:248 #6 in loongarch_cpu_set_irq (opaque=0x632000030800, irq=11, level=0) at ../target/loongarch/cpu.c:100 #7 in helper_csrwr_ticlr (env=0x632000039440, val=1) at ../target/loongarch/csr_helper.c:85 #8 in code_gen_buffer () #9 in cpu_tb_exec (cpu=0x632000030800, itb=0x7fff946ac280, tb_exit=0x7ffe4fcb6c30) at ../accel/tcg/cpu-exec.c:358 Add mutex iothread lock around loongarch_cpu_set_irq in csrwr_ticlr() to fix the bug. Signed-off-by: Xiaojuan Yang <[email protected]> Reviewed-by: Richard Henderson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Richard Henderson <[email protected]>

As soon as virtio_scsi_data_plane_start() attaches host notifiers the IOThread may start virtqueue processing. There is a race between IOThread virtqueue processing and virtio_scsi_data_plane_start() because it only assigns s->dataplane_started after attaching host notifiers. When a virtqueue handler function in the IOThread calls virtio_scsi_defer_to_dataplane() it may see !s->dataplane_started and attempt to start dataplane even though we're already in the IOThread: #0 0x00007f67b360857c __pthread_kill_implementation (libc.so.6 + 0xa257c) #1 0x00007f67b35bbd56 raise (libc.so.6 + 0x55d56) #2 0x00007f67b358e833 abort (libc.so.6 + 0x28833) #3 0x00007f67b358e75b __assert_fail_base.cold (libc.so.6 + 0x2875b) #4 0x00007f67b35b4cd6 __assert_fail (libc.so.6 + 0x4ecd6) #5 0x000055ca87fd411b memory_region_transaction_commit (qemu-kvm + 0x67511b) #6 0x000055ca87e17811 virtio_pci_ioeventfd_assign (qemu-kvm + 0x4b8811) #7 0x000055ca87e14836 virtio_bus_set_host_notifier (qemu-kvm + 0x4b5836) #8 0x000055ca87f8e14e virtio_scsi_set_host_notifier (qemu-kvm + 0x62f14e) #9 0x000055ca87f8dd62 virtio_scsi_dataplane_start (qemu-kvm + 0x62ed62) #10 0x000055ca87e14610 virtio_bus_start_ioeventfd (qemu-kvm + 0x4b5610) #11 0x000055ca87f8c29a virtio_scsi_handle_ctrl (qemu-kvm + 0x62d29a) #12 0x000055ca87fa5902 virtio_queue_host_notifier_read (qemu-kvm + 0x646902) #13 0x000055ca882c099e aio_dispatch_handler (qemu-kvm + 0x96199e) #14 0x000055ca882c1761 aio_poll (qemu-kvm + 0x962761) qemu#15 0x000055ca880e1052 iothread_run (qemu-kvm + 0x782052) qemu#16 0x000055ca882c562a qemu_thread_start (qemu-kvm + 0x96662a) This patch assigns s->dataplane_started before attaching host notifiers so that virtqueue handler functions that run in the IOThread before virtio_scsi_data_plane_start() returns correctly identify that dataplane does not need to be started. This fix is taken from the virtio-blk dataplane code and it's worth adding a comment in virtio-blk as well to explain why it works. Note that s->dataplane_started does not need the AioContext lock because it is set before attaching host notifiers and cleared after detaching host notifiers. In other words, the IOThread always sees the value true and the main loop thread does not modify it while the IOThread is active. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099541 Reported-by: Qing Wang <[email protected]> Signed-off-by: Stefan Hajnoczi <[email protected]> Message-Id: <[email protected]> Reviewed-by: Emanuele Giuseppe Esposito <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

The DMA engine is started by I/O access and then itself accesses the I/O registers, triggering a reentrancy bug. The following log can reveal it: ==5637==ERROR: AddressSanitizer: stack-overflow #0 0x5595435f6078 in tulip_xmit_list_update qemu/hw/net/tulip.c:673 #1 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13 #2 0x559544637f86 in memory_region_write_accessor qemu/softmmu/memory.c:492:5 #3 0x5595446379fa in access_with_adjusted_size qemu/softmmu/memory.c:554:18 #4 0x5595446372fa in memory_region_dispatch_write qemu/softmmu/memory.c #5 0x55954468b74c in flatview_write_continue qemu/softmmu/physmem.c:2825:23 #6 0x559544683662 in flatview_write qemu/softmmu/physmem.c:2867:12 #7 0x5595446833f3 in address_space_write qemu/softmmu/physmem.c:2963:18 #8 0x5595435fb082 in dma_memory_rw_relaxed qemu/include/sysemu/dma.h:87:12 #9 0x5595435fb082 in dma_memory_rw qemu/include/sysemu/dma.h:130:12 #10 0x5595435fb082 in dma_memory_write qemu/include/sysemu/dma.h:171:12 #11 0x5595435fb082 in stl_le_dma qemu/include/sysemu/dma.h:272:1 #12 0x5595435fb082 in stl_le_pci_dma qemu/include/hw/pci/pci.h:910:1 #13 0x5595435fb082 in tulip_desc_write qemu/hw/net/tulip.c:101:9 #14 0x5595435f7e3d in tulip_xmit_list_update qemu/hw/net/tulip.c:706:9 qemu#15 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13 Fix this bug by restricting the DMA engine to memories regions. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Jason Wang <[email protected]>

Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status" causes segmentation fault with following dumpstack: #1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312 #2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63 #3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128 #4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150 #5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178 #6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421 #7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320 #8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0 #9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297 #10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320 #11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596 #12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734 #13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38 #14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47 Fixes: ebb6207 ("hw/acpi: Add ACPI Generic Event Device Support") Signed-off-by: Keqian Zhu <[email protected]> Reviewed-by: Igor Mammedov <[email protected]> Message-id: [email protected] Signed-off-by: Peter Maydell <[email protected]>

When building QEMU with DEBUG_ATI defined then running with '-device ati-vga,romfile="" -d unimp,guest_errors -trace ati\*' we get: ati_mm_write 4 0x16c0 DP_CNTL <- 0x1 ati_mm_write 4 0x146c DP_GUI_MASTER_CNTL <- 0x2 ati_mm_write 4 0x16c8 DP_MIX <- 0xff0000 ati_mm_write 4 0x16c4 DP_DATATYPE <- 0x2 ati_mm_write 4 0x224 CRTC_OFFSET <- 0x0 ati_mm_write 4 0x142c DST_PITCH_OFFSET <- 0xfe00000 ati_mm_write 4 0x1420 DST_Y <- 0x3fff ati_mm_write 4 0x1410 DST_HEIGHT <- 0x3fff ati_mm_write 4 0x1588 DST_WIDTH_X <- 0x3fff3fff ati_2d_blt: vram:0x7fff5fa00000 addr:0 ds:0x7fff61273800 stride:2560 bpp:32 rop:0xff ati_2d_blt: 0 0 0, 0 127 0, (0,0) -> (16383,16383) 16383x16383 > ^ ati_2d_blt: pixman_fill(dst:0x7fff5fa00000, stride:254, bpp:8, x:16383, y:16383, w:16383, h:16383, xor:0xff000000) Thread 3 "qemu-system-i38" received signal SIGSEGV, Segmentation fault. (gdb) bt #0 0x00007ffff7f62ce0 in sse2_fill.lto_priv () at /lib64/libpixman-1.so.0 #1 0x00007ffff7f09278 in pixman_fill () at /lib64/libpixman-1.so.0 #2 0x0000555557b5a9af in ati_2d_blt (s=0x631000028800) at hw/display/ati_2d.c:196 #3 0x0000555557b4b5a2 in ati_mm_write (opaque=0x631000028800, addr=5512, data=1073692671, size=4) at hw/display/ati.c:843 #4 0x0000555558b90ec4 in memory_region_write_accessor (mr=0x631000039cc0, addr=5512, ..., size=4, ...) at softmmu/memory.c:492 Commit 584acf3 ("ati-vga: Fix reverse bit blts") introduced the local dst_x and dst_y which adjust the (x, y) coordinates depending on the direction in the SRCCOPY ROP3 operation, but forgot to address the same issue for the PATCOPY, BLACKNESS and WHITENESS operations, which also call pixman_fill(). Fix that now by using the adjusted coordinates in the pixman_fill call, and update the related debug printf(). Reported-by: Qiang Liu <[email protected]> Fixes: 584acf3 ("ati-vga: Fix reverse bit blts") Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Tested-by: Mauro Matteo Cascella <[email protected]> Message-Id: <[email protected]> Signed-off-by: Gerd Hoffmann <[email protected]>

Fix warnings such: disas/nanomips.c:3251:64: warning: format specifies type 'char *' but the argument has type 'int64' (aka 'long long') [-Wformat] return img_format("CACHE 0x%" PRIx64 ", %s(%s)", op_value, s_value, rs); ~~ ^~~~~~~ %lld To avoid crashes such (kernel from commit f375ad6): $ qemu-system-mipsel -cpu I7200 -d in_asm -kernel generic_nano32r6el_page4k ... ---------------- IN: __bzero 0x805c6084: 20c4 6950 ADDU r13, a0, a2 0x805c6088: 9089 ADDIU a0, 1 Process 70261 stopped * thread #6, stop reason = EXC_BAD_ACCESS (code=1, address=0xfffffffffffffff0) frame #0: 0x00000001bfe38864 libsystem_platform.dylib`_platform_strlen + 4 libsystem_platform.dylib`: -> 0x1bfe38864 <+4>: ldr q0, [x1] 0x1bfe38868 <+8>: adr x3, #-0xc8 ; ___lldb_unnamed_symbol314 0x1bfe3886c <+12>: ldr q2, [x3], #0x10 0x1bfe38870 <+16>: and x2, x0, #0xf Target 0: (qemu-system-mipsel) stopped. (lldb) bt * thread #6, stop reason = EXC_BAD_ACCESS (code=1, address=0xfffffffffffffff0) * frame #0: 0x00000001bfe38864 libsystem_platform.dylib`_platform_strlen + 4 frame #1: 0x00000001bfce76a0 libsystem_c.dylib`__vfprintf + 4544 frame #2: 0x00000001bfd158b4 libsystem_c.dylib`_vasprintf + 280 frame #3: 0x0000000101c22fb0 libglib-2.0.0.dylib`g_vasprintf + 28 frame #4: 0x0000000101bfb7d8 libglib-2.0.0.dylib`g_strdup_vprintf + 32 frame #5: 0x000000010000fb70 qemu-system-mipsel`img_format(format=<unavailable>) at nanomips.c:103:14 [opt] frame #6: 0x0000000100018868 qemu-system-mipsel`SB_S9_(instruction=<unavailable>, info=<unavailable>) at nanomips.c:12616:12 [opt] frame #7: 0x000000010000f90c qemu-system-mipsel`print_insn_nanomips at nanomips.c:589:28 [opt] Fixes: 4066c15 ("disas/nanomips: Remove IMMEDIATE functions") Reported-by: Stefan Weil <[email protected]> Reviewed-by: Stefan Weil <[email protected]> Signed-off-by: Philippe Mathieu-Daudé <[email protected]> Message-Id: <[email protected]>

This is below memleak detected when to quit the qemu-system-x86_64 (with vhost-scsi-pci). (qemu) quit ================================================================= ==15568==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f00aec57917 in __interceptor_calloc (/lib64/libasan.so.6+0xb4917) #1 0x7f00ada0d7b5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x517b5) #2 0x5648ffd38bac in vhost_scsi_start ../hw/scsi/vhost-scsi.c:92 #3 0x5648ffd38d52 in vhost_scsi_set_status ../hw/scsi/vhost-scsi.c:131 #4 0x5648ffda340e in virtio_set_status ../hw/virtio/virtio.c:2036 #5 0x5648ff8de281 in virtio_ioport_write ../hw/virtio/virtio-pci.c:431 #6 0x5648ff8deb29 in virtio_pci_config_write ../hw/virtio/virtio-pci.c:576 #7 0x5648ffe5c0c2 in memory_region_write_accessor ../softmmu/memory.c:493 #8 0x5648ffe5c424 in access_with_adjusted_size ../softmmu/memory.c:555 #9 0x5648ffe6428f in memory_region_dispatch_write ../softmmu/memory.c:1515 #10 0x5648ffe8613d in flatview_write_continue ../softmmu/physmem.c:2825 #11 0x5648ffe86490 in flatview_write ../softmmu/physmem.c:2867 #12 0x5648ffe86d9f in address_space_write ../softmmu/physmem.c:2963 #13 0x5648ffe86e57 in address_space_rw ../softmmu/physmem.c:2973 #14 0x5648fffbfb3d in kvm_handle_io ../accel/kvm/kvm-all.c:2639 qemu#15 0x5648fffc0e0d in kvm_cpu_exec ../accel/kvm/kvm-all.c:2890 qemu#16 0x5648fffc90a7 in kvm_vcpu_thread_fn ../accel/kvm/kvm-accel-ops.c:51 qemu#17 0x56490042400a in qemu_thread_start ../util/qemu-thread-posix.c:505 qemu#18 0x7f00ac3b6ea4 in start_thread (/lib64/libpthread.so.0+0x7ea4) Free the vsc->inflight at the 'stop' path. Fixes: b82526c ("vhost-scsi: support inflight io track") Cc: Joe Jin <[email protected]> Cc: Li Feng <[email protected]> Signed-off-by: Dongli Zhang <[email protected]> Message-Id: <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

Fixes the appended use-after-free. The root cause is that during tb invalidation we use CPU_FOREACH, and therefore to safely free a vCPU we must wait for an RCU grace period to elapse. $ x86_64-linux-user/qemu-x86_64 tests/tcg/x86_64-linux-user/munmap-pthread ================================================================= ==1800604==ERROR: AddressSanitizer: heap-use-after-free on address 0x62d0005f7418 at pc 0x5593da6704eb bp 0x7f4961a7ac70 sp 0x7f4961a7ac60 READ of size 8 at 0x62d0005f7418 thread T2 #0 0x5593da6704ea in tb_jmp_cache_inval_tb ../accel/tcg/tb-maint.c:244 #1 0x5593da6704ea in do_tb_phys_invalidate ../accel/tcg/tb-maint.c:290 #2 0x5593da670631 in tb_phys_invalidate__locked ../accel/tcg/tb-maint.c:306 #3 0x5593da670631 in tb_invalidate_phys_page_range__locked ../accel/tcg/tb-maint.c:542 #4 0x5593da67106d in tb_invalidate_phys_range ../accel/tcg/tb-maint.c:614 #5 0x5593da6a64d4 in target_munmap ../linux-user/mmap.c:766 #6 0x5593da6dba05 in do_syscall1 ../linux-user/syscall.c:10105 #7 0x5593da6f564c in do_syscall ../linux-user/syscall.c:13329 #8 0x5593da49e80c in cpu_loop ../linux-user/x86_64/../i386/cpu_loop.c:233 #9 0x5593da6be28c in clone_func ../linux-user/syscall.c:6633 #10 0x7f496231cb42 in start_thread nptl/pthread_create.c:442 #11 0x7f49623ae9ff (/lib/x86_64-linux-gnu/libc.so.6+0x1269ff) 0x62d0005f7418 is located 28696 bytes inside of 32768-byte region [0x62d0005f0400,0x62d0005f8400) freed by thread T148 here: #0 0x7f49627b6460 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52 #1 0x5593da5ac057 in cpu_exec_unrealizefn ../cpu.c:180 #2 0x5593da81f851 (/home/cota/src/qemu/build/qemu-x86_64+0x484851) Signed-off-by: Emilio Cota <[email protected]> Reviewed-by: Richard Henderson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Alex Bennée <[email protected]> Message-Id: <[email protected]>

Fixes this tsan crash, easy to reproduce with any large enough program: $ tests/unit/test-qht 1..2 ThreadSanitizer: CHECK failed: sanitizer_deadlock_detector.h:67 "((n_all_locks_)) < (((sizeof(all_locks_with_contexts_)/sizeof((all_locks_with_contexts_)[0]))))" (0x40, 0x40) (tid=1821568) #0 __tsan::CheckUnwind() ../../../../src/libsanitizer/tsan/tsan_rtl.cpp:353 (libtsan.so.2+0x90034) #1 __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long) ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:86 (libtsan.so.2+0xca555) #2 __sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::addLock(unsigned long, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:67 (libtsan.so.2+0xb3616) #3 __sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::addLock(unsigned long, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:59 (libtsan.so.2+0xb3616) #4 __sanitizer::DeadlockDetector<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::onLockAfter(__sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >*, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:216 (libtsan.so.2+0xb3616) #5 __sanitizer::DD::MutexAfterLock(__sanitizer::DDCallback*, __sanitizer::DDMutex*, bool, bool) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector1.cpp:169 (libtsan.so.2+0xb3616) #6 __tsan::MutexPostLock(__tsan::ThreadState*, unsigned long, unsigned long, unsigned int, int) ../../../../src/libsanitizer/tsan/tsan_rtl_mutex.cpp:200 (libtsan.so.2+0xa3382) #7 __tsan_mutex_post_lock ../../../../src/libsanitizer/tsan/tsan_interface_ann.cpp:384 (libtsan.so.2+0x76bc3) #8 qemu_spin_lock /home/cota/src/qemu/include/qemu/thread.h:259 (test-qht+0x44a97) #9 qht_map_lock_buckets ../util/qht.c:253 (test-qht+0x44a97) #10 do_qht_iter ../util/qht.c:809 (test-qht+0x45f33) #11 qht_iter ../util/qht.c:821 (test-qht+0x45f33) #12 iter_check ../tests/unit/test-qht.c:121 (test-qht+0xe473) #13 qht_do_test ../tests/unit/test-qht.c:202 (test-qht+0xe473) #14 qht_test ../tests/unit/test-qht.c:240 (test-qht+0xe7c1) qemu#15 test_default ../tests/unit/test-qht.c:246 (test-qht+0xe828) qemu#16 <null> <null> (libglib-2.0.so.0+0x7daed) qemu#17 <null> <null> (libglib-2.0.so.0+0x7d80a) qemu#18 <null> <null> (libglib-2.0.so.0+0x7d80a) qemu#19 g_test_run_suite <null> (libglib-2.0.so.0+0x7dfe9) qemu#20 g_test_run <null> (libglib-2.0.so.0+0x7e055) qemu#21 main ../tests/unit/test-qht.c:259 (test-qht+0xd2c6) qemu#22 __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 (libc.so.6+0x29d8f) qemu#23 __libc_start_main_impl ../csu/libc-start.c:392 (libc.so.6+0x29e3f) qemu#24 _start <null> (test-qht+0xdb44) Signed-off-by: Emilio Cota <[email protected]> Reviewed-by: Richard Henderson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Alex Bennée <[email protected]> Message-Id: <[email protected]>

After live migration with virtio block device, qemu crash at: #0 0x000055914f46f795 in object_dynamic_cast_assert (obj=0x559151b7b090, typename=0x55914f80fbc4 "qio-channel", file=0x55914f80fb90 "/images/testvfe/sw/qemu.gerrit/include/io/channel.h", line=30, func=0x55914f80fcb8 <__func__.17257> "QIO_CHANNEL") at ../qom/object.c:872 #1 0x000055914f480d68 in QIO_CHANNEL (obj=0x559151b7b090) at /images/testvfe/sw/qemu.gerrit/include/io/channel.h:29 #2 0x000055914f4812f8 in qio_net_listener_set_client_func_full (listener=0x559151b7a720, func=0x55914f580b97 <tcp_chr_accept>, data=0x5591519f4ea0, notify=0x0, context=0x0) at ../io/net-listener.c:166 #3 0x000055914f580059 in tcp_chr_update_read_handler (chr=0x5591519f4ea0) at ../chardev/char-socket.c:637 #4 0x000055914f583dca in qemu_chr_be_update_read_handlers (s=0x5591519f4ea0, context=0x0) at ../chardev/char.c:226 #5 0x000055914f57b7c9 in qemu_chr_fe_set_handlers_full (b=0x559152bf23a0, fd_can_read=0x0, fd_read=0x0, fd_event=0x0, be_change=0x0, opaque=0x0, context=0x0, set_open=false, sync_state=true) at ../chardev/char-fe.c:279 #6 0x000055914f57b86d in qemu_chr_fe_set_handlers (b=0x559152bf23a0, fd_can_read=0x0, fd_read=0x0, fd_event=0x0, be_change=0x0, opaque=0x0, context=0x0, set_open=false) at ../chardev/char-fe.c:304 #7 0x000055914f378caf in vhost_user_async_close (d=0x559152bf21a0, chardev=0x559152bf23a0, vhost=0x559152bf2420, cb=0x55914f2fb8c1 <vhost_user_blk_disconnect>) at ../hw/virtio/vhost-user.c:2725 #8 0x000055914f2fba40 in vhost_user_blk_event (opaque=0x559152bf21a0, event=CHR_EVENT_CLOSED) at ../hw/block/vhost-user-blk.c:395 #9 0x000055914f58388c in chr_be_event (s=0x5591519f4ea0, event=CHR_EVENT_CLOSED) at ../chardev/char.c:61 #10 0x000055914f583905 in qemu_chr_be_event (s=0x5591519f4ea0, event=CHR_EVENT_CLOSED) at ../chardev/char.c:81 #11 0x000055914f581275 in char_socket_finalize (obj=0x5591519f4ea0) at ../chardev/char-socket.c:1083 #12 0x000055914f46f073 in object_deinit (obj=0x5591519f4ea0, type=0x5591519055c0) at ../qom/object.c:680 #13 0x000055914f46f0e5 in object_finalize (data=0x5591519f4ea0) at ../qom/object.c:694 #14 0x000055914f46ff06 in object_unref (objptr=0x5591519f4ea0) at ../qom/object.c:1202 qemu#15 0x000055914f4715a4 in object_finalize_child_property (obj=0x559151b76c50, name=0x559151b7b250 "char3", opaque=0x5591519f4ea0) at ../qom/object.c:1747 qemu#16 0x000055914f46ee86 in object_property_del_all (obj=0x559151b76c50) at ../qom/object.c:632 qemu#17 0x000055914f46f0d2 in object_finalize (data=0x559151b76c50) at ../qom/object.c:693 qemu#18 0x000055914f46ff06 in object_unref (objptr=0x559151b76c50) at ../qom/object.c:1202 qemu#19 0x000055914f4715a4 in object_finalize_child_property (obj=0x559151b6b560, name=0x559151b76630 "chardevs", opaque=0x559151b76c50) at ../qom/object.c:1747 qemu#20 0x000055914f46ef67 in object_property_del_child (obj=0x559151b6b560, child=0x559151b76c50) at ../qom/object.c:654 qemu#21 0x000055914f46f042 in object_unparent (obj=0x559151b76c50) at ../qom/object.c:673 qemu#22 0x000055914f58632a in qemu_chr_cleanup () at ../chardev/char.c:1189 qemu#23 0x000055914f16c66c in qemu_cleanup () at ../softmmu/runstate.c:830 qemu#24 0x000055914eee7b9e in qemu_default_main () at ../softmmu/main.c:38 qemu#25 0x000055914eee7bcc in main (argc=86, argv=0x7ffc97cb8d88) at ../softmmu/main.c:48 In char_socket_finalize after s->listener freed, event callback function vhost_user_blk_event will be called to handle CHR_EVENT_CLOSED. vhost_user_blk_event is calling qio_net_listener_set_client_func_full which is still using s->listener. Setting s->listener = NULL after object_unref(OBJECT(s->listener)) can solve this issue. Signed-off-by: Yajun Wu <[email protected]> Acked-by: Jiri Pirko <[email protected]> Message-Id: <[email protected]> Reviewed-by: Marc-André Lureau <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

This leakage can be seen through test-io-channel-tls: $ ../configure --target-list=aarch64-softmmu --enable-sanitizers $ make ./tests/unit/test-io-channel-tls $ ./tests/unit/test-io-channel-tls Indirect leak of 104 byte(s) in 1 object(s) allocated from: #0 0x7f81d1725808 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:144 #1 0x7f81d135ae98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98) #2 0x55616c5d4c1b in object_new_with_propv ../qom/object.c:795 #3 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768 #4 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70 #5 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158 #6 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d) Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7f81d1725a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153 #1 0x7f81d1472a20 in gnutls_dh_params_init (/lib/x86_64-linux-gnu/libgnutls.so.30+0x46a20) #2 0x55616c6485ff in qcrypto_tls_creds_x509_load ../crypto/tlscredsx509.c:634 #3 0x55616c648ba2 in qcrypto_tls_creds_x509_complete ../crypto/tlscredsx509.c:694 #4 0x55616c5e1fea in user_creatable_complete ../qom/object_interfaces.c:28 #5 0x55616c5d4c8c in object_new_with_propv ../qom/object.c:807 #6 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768 #7 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70 #8 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158 #9 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d) ... SUMMARY: AddressSanitizer: 49143 byte(s) leaked in 184 allocation(s). The docs for `g_source_add_child_source(source, child_source)` says "source will hold a reference on child_source while child_source is attached to it." Therefore, we should unreference the child source at `qio_channel_tls_read_watch()` after attaching it to `source`. With this change, ./tests/unit/test-io-channel-tls shows no leakages. Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Matheus Tavares Bernardino <[email protected]> Signed-off-by: Daniel P. Berrangé <[email protected]>

xbzrle_encode_buffer_avx512() checks for overflows too scarcely in its outer loop, causing out-of-bounds writes: $ ../configure --target-list=aarch64-softmmu --enable-sanitizers --enable-avx512bw $ make tests/unit/test-xbzrle && ./tests/unit/test-xbzrle ==5518==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x62100000b100 at pc 0x561109a7714d bp 0x7ffed712a440 sp 0x7ffed712a430 WRITE of size 1 at 0x62100000b100 thread T0 #0 0x561109a7714c in uleb128_encode_small ../util/cutils.c:831 #1 0x561109b67f6a in xbzrle_encode_buffer_avx512 ../migration/xbzrle.c:275 #2 0x5611099a7428 in test_encode_decode_overflow ../tests/unit/test-xbzrle.c:153 #3 0x7fb2fb65a58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d) #4 0x7fb2fb65a333 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a333) #5 0x7fb2fb65aa79 in g_test_run_suite (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7aa79) #6 0x7fb2fb65aa94 in g_test_run (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7aa94) #7 0x5611099a3a23 in main ../tests/unit/test-xbzrle.c:218 #8 0x7fb2fa78c082 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x24082) #9 0x5611099a608d in _start (/qemu/build/tests/unit/test-xbzrle+0x28408d) 0x62100000b100 is located 0 bytes to the right of 4096-byte region [0x62100000a100,0x62100000b100) allocated by thread T0 here: #0 0x7fb2fb823a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153 #1 0x7fb2fb637ef0 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57ef0) Fix that by performing the overflow check in the inner loop, instead. Signed-off-by: Matheus Tavares Bernardino <[email protected]> Reviewed-by: Dr. David Alan Gilbert <[email protected]> Reviewed-by: Juan Quintela <[email protected]> Signed-off-by: Juan Quintela <[email protected]>

For ex, when resetting the xlnx-zcu102 machine: (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS (code=1, address=0x50) * frame #0: 0x10020a740 gd_vc_send_chars(vc=0x000000000) at gtk.c:1759:41 [opt] frame #1: 0x100636264 qemu_chr_fe_accept_input(be=<unavailable>) at char-fe.c:159:9 [opt] frame #2: 0x1000608e0 cadence_uart_reset_hold [inlined] uart_rx_reset(s=0x10810a960) at cadence_uart.c:158:5 [opt] frame #3: 0x1000608d4 cadence_uart_reset_hold(obj=0x10810a960) at cadence_uart.c:530:5 [opt] frame #4: 0x100580ab4 resettable_phase_hold(obj=0x10810a960, opaque=0x000000000, type=<unavailable>) at resettable.c:0 [opt] frame #5: 0x10057d1b0 bus_reset_child_foreach(obj=<unavailable>, cb=(resettable_phase_hold at resettable.c:162), opaque=0x000000000, type=RESET_TYPE_COLD) at bus.c:97:13 [opt] frame #6: 0x1005809f8 resettable_phase_hold [inlined] resettable_child_foreach(rc=0x000060000332d2c0, obj=0x0000600002c1c180, cb=<unavailable>, opaque=0x000000000, type=RESET_TYPE_COLD) at resettable.c:96:9 [opt] frame #7: 0x1005809d8 resettable_phase_hold(obj=0x0000600002c1c180, opaque=0x000000000, type=RESET_TYPE_COLD) at resettable.c:173:5 [opt] frame #8: 0x1005803a0 resettable_assert_reset(obj=0x0000600002c1c180, type=<unavailable>) at resettable.c:60:5 [opt] frame #9: 0x10058027c resettable_reset(obj=0x0000600002c1c180, type=RESET_TYPE_COLD) at resettable.c:45:5 [opt] While the chardev is created early, the VirtualConsole is associated after, during qemu_init_displays(). Signed-off-by: Marc-André Lureau <[email protected]> Tested-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Message-Id: <[email protected]>

blk_get_geometry() eventually calls bdrv_nb_sectors(), which is a co_wrapper_mixed_bdrv_rdlock. This means that when it is called from coroutine context, it already assume to have the graph locked. However, virtio_blk_sect_range_ok() in block/export/virtio-blk-handler.c (used by vhost-user-blk and VDUSE exports) runs in a coroutine, but doesn't take the graph lock - blk_*() functions are generally expected to do that internally. This causes an assertion failure when accessing an export for the first time if it runs in an iothread. This is an example of the crash: $ ./storage-daemon/qemu-storage-daemon --object iothread,id=th0 --blockdev file,filename=/home/kwolf/images/hd.img,node-name=disk --export vhost-user-blk,addr.type=unix,addr.path=/tmp/vhost.sock,node-name=disk,id=exp0,iothread=th0 qemu-storage-daemon: ../block/graph-lock.c:268: void assert_bdrv_graph_readable(void): Assertion `qemu_in_main_thread() || reader_count()' failed. (gdb) bt #0 0x00007ffff6eafe5c in __pthread_kill_implementation () from /lib64/libc.so.6 #1 0x00007ffff6e5fa76 in raise () from /lib64/libc.so.6 #2 0x00007ffff6e497fc in abort () from /lib64/libc.so.6 #3 0x00007ffff6e4971b in __assert_fail_base.cold () from /lib64/libc.so.6 #4 0x00007ffff6e58656 in __assert_fail () from /lib64/libc.so.6 #5 0x00005555556337a3 in assert_bdrv_graph_readable () at ../block/graph-lock.c:268 #6 0x00005555555fd5a2 in bdrv_co_nb_sectors (bs=0x5555564c5ef0) at ../block.c:5847 #7 0x00005555555ee949 in bdrv_nb_sectors (bs=0x5555564c5ef0) at block/block-gen.c:256 #8 0x00005555555fd6b9 in bdrv_get_geometry (bs=0x5555564c5ef0, nb_sectors_ptr=0x7fffef7fedd0) at ../block.c:5884 #9 0x000055555562ad6d in blk_get_geometry (blk=0x5555564cb200, nb_sectors_ptr=0x7fffef7fedd0) at ../block/block-backend.c:1624 #10 0x00005555555ddb74 in virtio_blk_sect_range_ok (blk=0x5555564cb200, block_size=512, sector=0, size=512) at ../block/export/virtio-blk-handler.c:44 #11 0x00005555555dd80d in virtio_blk_process_req (handler=0x5555564cbb98, in_iov=0x7fffe8003830, out_iov=0x7fffe8003860, in_num=1, out_num=0) at ../block/export/virtio-blk-handler.c:189 #12 0x00005555555dd546 in vu_blk_virtio_process_req (opaque=0x7fffe8003800) at ../block/export/vhost-user-blk-server.c:66 #13 0x00005555557bf4a1 in coroutine_trampoline (i0=-402635264, i1=32767) at ../util/coroutine-ucontext.c:177 #14 0x00007ffff6e75c20 in ?? () from /lib64/libc.so.6 qemu#15 0x00007fffefffa870 in ?? () qemu#16 0x0000000000000000 in ?? () Fix this by creating a new blk_co_get_geometry() that takes the lock, and changing blk_get_geometry() to be a co_wrapper_mixed around it. To make the resulting code cleaner, virtio-blk-handler.c can directly call the coroutine version now (though that wouldn't be necessary for fixing the bug, taking the lock in blk_co_get_geometry() is what fixes it). Fixes: 8ab8140 Reported-by: Lukáš Doktor <[email protected]> Signed-off-by: Kevin Wolf <[email protected]> Message-Id: <[email protected]> Reviewed-by: Emanuele Giuseppe Esposito <[email protected]> Signed-off-by: Kevin Wolf <[email protected]>

Command "qemu-system-riscv64 -machine virt -m 2G -smp 1 -numa node,mem=1G -numa node,mem=1G" would trigger this problem.Backtrace with: #0 0x0000555555b5b1a4 in riscv_numa_get_default_cpu_node_id at ../hw/riscv/numa.c:211 #1 0x00005555558ce510 in machine_numa_finish_cpu_init at ../hw/core/machine.c:1230 #2 0x00005555558ce9d3 in machine_run_board_init at ../hw/core/machine.c:1346 #3 0x0000555555aaedc3 in qemu_init_board at ../softmmu/vl.c:2513 #4 0x0000555555aaf064 in qmp_x_exit_preconfig at ../softmmu/vl.c:2609 #5 0x0000555555ab1916 in qemu_init at ../softmmu/vl.c:3617 #6 0x000055555585463b in main at ../softmmu/main.c:47 This commit fixes the issue by adding parameter checks. Reviewed-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: LIU Zhiwei <[email protected]> Reviewed-by: Weiwei Li <[email protected]> Signed-off-by: Yin Wang <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Message-Id: <[email protected]> Signed-off-by: Alistair Francis <[email protected]>

This reverts commit b320e21, which accidentally broke TCG, because it made the TCG -cpu max report the presence of MTE to the guest even if the board hadn't enabled MTE by wiring up the tag RAM. This meant that if the guest then tried to use MTE QEMU would segfault accessing the non-existent tag RAM: ==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476) ==346473==The signal is caused by a READ memory access. ==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used. #0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12 #1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31 #2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10 #3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15 #4 0x7f782431a293 (<unknown module>) It's also not clear that the KVM logic is correct either: MTE defaults to on there, rather than being only on if the board wants it on. Revert the whole commit for now so we can sort out the issues. (We didn't catch this in CI because we have no test cases in avocado that use guests with MTE support.) Signed-off-by: Peter Maydell <[email protected]> Message-Id: <[email protected]> Signed-off-by: Richard Henderson <[email protected]>

…moryRegions Currently when portio_list MemoryRegions are freed using portio_list_destroy() the RCU thread segfaults generating a backtrace similar to that below: #0 0x5555599a34b6 in phys_section_destroy ../softmmu/physmem.c:996 #1 0x5555599a37a3 in phys_sections_free ../softmmu/physmem.c:1011 #2 0x5555599b24aa in address_space_dispatch_free ../softmmu/physmem.c:2430 #3 0x55555996a283 in flatview_destroy ../softmmu/memory.c:292 #4 0x55555a2cb9fb in call_rcu_thread ../util/rcu.c:284 #5 0x55555a29b71d in qemu_thread_start ../util/qemu-thread-posix.c:541 #6 0x7ffff4a0cea6 in start_thread nptl/pthread_create.c:477 #7 0x7ffff492ca2e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0xfca2e) The problem here is that portio_list_destroy() unparents the portio_list MemoryRegions causing them to be freed immediately, however the flatview still has a reference to the MemoryRegion and so causes a use-after-free segfault when the RCU thread next updates the flatview. Solve the lifetime issue by making MemoryRegionPortioList the owner of the portio_list MemoryRegions, and then reparenting them to the portio_list owner. This ensures that they can be accessed as QOM children via the portio_list owner, yet the MemoryRegionPortioList owns the refcount. Update portio_list_destroy() to unparent the MemoryRegion from the portio_list owner (while keeping mrpio->mr live until finalization of the MemoryRegionPortioList), so that the portio_list MemoryRegions remain allocated until flatview_destroy() removes the final refcount upon the next flatview update. Signed-off-by: Mark Cave-Ayland <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

Command "qemu-system-riscv64 -machine virt -m 2G -smp 1 -numa node,mem=1G -numa node,mem=1G" would trigger this problem.Backtrace with: #0 0x0000555555b5b1a4 in riscv_numa_get_default_cpu_node_id at ../hw/riscv/numa.c:211 #1 0x00005555558ce510 in machine_numa_finish_cpu_init at ../hw/core/machine.c:1230 #2 0x00005555558ce9d3 in machine_run_board_init at ../hw/core/machine.c:1346 #3 0x0000555555aaedc3 in qemu_init_board at ../softmmu/vl.c:2513 #4 0x0000555555aaf064 in qmp_x_exit_preconfig at ../softmmu/vl.c:2609 #5 0x0000555555ab1916 in qemu_init at ../softmmu/vl.c:3617 #6 0x000055555585463b in main at ../softmmu/main.c:47 This commit fixes the issue by adding parameter checks. Reviewed-by: Alistair Francis <[email protected]> Reviewed-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: LIU Zhiwei <[email protected]> Reviewed-by: Weiwei Li <[email protected]> Signed-off-by: Yin Wang <[email protected]> Message-Id: <[email protected]>

Command "qemu-system-riscv64 -machine virt -m 2G -smp 1 -numa node,mem=1G -numa node,mem=1G" would trigger this problem.Backtrace with: #0 0x0000555555b5b1a4 in riscv_numa_get_default_cpu_node_id at ../hw/riscv/numa.c:211 #1 0x00005555558ce510 in machine_numa_finish_cpu_init at ../hw/core/machine.c:1230 #2 0x00005555558ce9d3 in machine_run_board_init at ../hw/core/machine.c:1346 #3 0x0000555555aaedc3 in qemu_init_board at ../softmmu/vl.c:2513 #4 0x0000555555aaf064 in qmp_x_exit_preconfig at ../softmmu/vl.c:2609 #5 0x0000555555ab1916 in qemu_init at ../softmmu/vl.c:3617 #6 0x000055555585463b in main at ../softmmu/main.c:47 This commit fixes the issue by adding parameter checks. Reviewed-by: Alistair Francis <[email protected]> Reviewed-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: LIU Zhiwei <[email protected]> Reviewed-by: Weiwei Li <[email protected]> Signed-off-by: Yin Wang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Alistair Francis <[email protected]>

vhost_dev_start function does not release memory_listener object in case of an error. This may crash the guest when vhost is unable to set memory table: stack trace of thread 125653: Program terminated with signal SIGSEGV, Segmentation fault #0 memory_listener_register (qemu-kvm + 0x6cda0f) #1 vhost_dev_start (qemu-kvm + 0x699301) #2 vhost_net_start (qemu-kvm + 0x45b03f) #3 virtio_net_set_status (qemu-kvm + 0x665672) #4 qmp_set_link (qemu-kvm + 0x548fd5) #5 net_vhost_user_event (qemu-kvm + 0x552c45) #6 tcp_chr_connect (qemu-kvm + 0x88d473) #7 tcp_chr_new_client (qemu-kvm + 0x88cf83) #8 tcp_chr_accept (qemu-kvm + 0x88b429) #9 qio_net_listener_channel_func (qemu-kvm + 0x7ac07c) #10 g_main_context_dispatch (libglib-2.0.so.0 + 0x54e2f) Release memory_listener objects in the error path. Signed-off-by: Prasad Pandit <[email protected]> Message-Id: <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Peter Xu <[email protected]> Fixes: c471ad0 ("vhost_net: device IOTLB support") Cc: [email protected] Acked-by: Jason Wang <[email protected]>

in order to avoid requests being stuck in a BlockBackend's request queue during cleanup. Having such requests can lead to a deadlock [0] with a virtio-scsi-pci device using iothread that's busy with IO when initiating a shutdown with QMP 'quit'. There is a race where such a queued request can continue sometime (maybe after bdrv_child_free()?) during bdrv_root_unref_child() [1]. The completion will hold the AioContext lock and wait for the BQL during SCSI completion, but the main thread will hold the BQL and wait for the AioContext as part of bdrv_root_unref_child(), leading to the deadlock [0]. [0]: > Thread 3 (Thread 0x7f3bbd87b700 (LWP 135952) "qemu-system-x86"): > #0 __lll_lock_wait (futex=futex@entry=0x564183365f00 <qemu_global_mutex>, private=0) at lowlevellock.c:52 > #1 0x00007f3bc1c0d843 in __GI___pthread_mutex_lock (mutex=0x564183365f00 <qemu_global_mutex>) at ../nptl/pthread_mutex_lock.c:80 > #2 0x0000564182939f2e in qemu_mutex_lock_impl (mutex=0x564183365f00 <qemu_global_mutex>, file=0x564182b7f774 "../softmmu/physmem.c", line=2593) at ../util/qemu-thread-posix.c:94 > #3 0x000056418247cc2a in qemu_mutex_lock_iothread_impl (file=0x564182b7f774 "../softmmu/physmem.c", line=2593) at ../softmmu/cpus.c:504 > #4 0x00005641826d5325 in prepare_mmio_access (mr=0x5641856148a0) at ../softmmu/physmem.c:2593 > #5 0x00005641826d6fe7 in address_space_stl_internal (as=0x56418679b310, addr=4276113408, val=16418, attrs=..., result=0x0, endian=DEVICE_LITTLE_ENDIAN) at /home/febner/repos/qemu/memory_ldst.c.inc:318 > #6 0x00005641826d7154 in address_space_stl_le (as=0x56418679b310, addr=4276113408, val=16418, attrs=..., result=0x0) at /home/febner/repos/qemu/memory_ldst.c.inc:357 > #7 0x0000564182374b07 in pci_msi_trigger (dev=0x56418679b0d0, msg=...) at ../hw/pci/pci.c:359 > #8 0x000056418237118b in msi_send_message (dev=0x56418679b0d0, msg=...) at ../hw/pci/msi.c:379 > #9 0x0000564182372c10 in msix_notify (dev=0x56418679b0d0, vector=8) at ../hw/pci/msix.c:542 > #10 0x000056418243719c in virtio_pci_notify (d=0x56418679b0d0, vector=8) at ../hw/virtio/virtio-pci.c:77 > #11 0x00005641826933b0 in virtio_notify_vector (vdev=0x5641867a34a0, vector=8) at ../hw/virtio/virtio.c:1985 > #12 0x00005641826948d6 in virtio_irq (vq=0x5641867ac078) at ../hw/virtio/virtio.c:2461 > #13 0x0000564182694978 in virtio_notify (vdev=0x5641867a34a0, vq=0x5641867ac078) at ../hw/virtio/virtio.c:2473 > #14 0x0000564182665b83 in virtio_scsi_complete_req (req=0x7f3bb000e5d0) at ../hw/scsi/virtio-scsi.c:115 > qemu#15 0x00005641826670ce in virtio_scsi_complete_cmd_req (req=0x7f3bb000e5d0) at ../hw/scsi/virtio-scsi.c:641 > qemu#16 0x000056418266736b in virtio_scsi_command_complete (r=0x7f3bb0010560, resid=0) at ../hw/scsi/virtio-scsi.c:712 > qemu#17 0x000056418239aac6 in scsi_req_complete (req=0x7f3bb0010560, status=2) at ../hw/scsi/scsi-bus.c:1526 > qemu#18 0x000056418239e090 in scsi_handle_rw_error (r=0x7f3bb0010560, ret=-123, acct_failed=false) at ../hw/scsi/scsi-disk.c:242 > qemu#19 0x000056418239e13f in scsi_disk_req_check_error (r=0x7f3bb0010560, ret=-123, acct_failed=false) at ../hw/scsi/scsi-disk.c:265 > qemu#20 0x000056418239e482 in scsi_dma_complete_noio (r=0x7f3bb0010560, ret=-123) at ../hw/scsi/scsi-disk.c:340 > qemu#21 0x000056418239e5d9 in scsi_dma_complete (opaque=0x7f3bb0010560, ret=-123) at ../hw/scsi/scsi-disk.c:371 > qemu#22 0x00005641824809ad in dma_complete (dbs=0x7f3bb000d9d0, ret=-123) at ../softmmu/dma-helpers.c:107 > qemu#23 0x0000564182480a72 in dma_blk_cb (opaque=0x7f3bb000d9d0, ret=-123) at ../softmmu/dma-helpers.c:127 > qemu#24 0x00005641827bf78a in blk_aio_complete (acb=0x7f3bb00021a0) at ../block/block-backend.c:1563 > qemu#25 0x00005641827bfa5e in blk_aio_write_entry (opaque=0x7f3bb00021a0) at ../block/block-backend.c:1630 > qemu#26 0x000056418295638a in coroutine_trampoline (i0=-1342102448, i1=32571) at ../util/coroutine-ucontext.c:177 > qemu#27 0x00007f3bc0caed40 in ?? () from /lib/x86_64-linux-gnu/libc.so.6 > qemu#28 0x00007f3bbd8757f0 in ?? () > qemu#29 0x0000000000000000 in ?? () > > Thread 1 (Thread 0x7f3bbe3e9280 (LWP 135944) "qemu-system-x86"): > #0 __lll_lock_wait (futex=futex@entry=0x5641856f2a00, private=0) at lowlevellock.c:52 > #1 0x00007f3bc1c0d8d1 in __GI___pthread_mutex_lock (mutex=0x5641856f2a00) at ../nptl/pthread_mutex_lock.c:115 > #2 0x0000564182939f2e in qemu_mutex_lock_impl (mutex=0x5641856f2a00, file=0x564182c0e319 "../util/async.c", line=728) at ../util/qemu-thread-posix.c:94 > #3 0x000056418293a140 in qemu_rec_mutex_lock_impl (mutex=0x5641856f2a00, file=0x564182c0e319 "../util/async.c", line=728) at ../util/qemu-thread-posix.c:149 > #4 0x00005641829532d5 in aio_context_acquire (ctx=0x5641856f29a0) at ../util/async.c:728 > #5 0x000056418279d5df in bdrv_set_aio_context_commit (opaque=0x5641856e6e50) at ../block.c:7493 > #6 0x000056418294e288 in tran_commit (tran=0x56418630bfe0) at ../util/transactions.c:87 > #7 0x000056418279d880 in bdrv_try_change_aio_context (bs=0x5641856f7130, ctx=0x56418548f810, ignore_child=0x0, errp=0x0) at ../block.c:7626 > #8 0x0000564182793f39 in bdrv_root_unref_child (child=0x5641856f47d0) at ../block.c:3242 > #9 0x00005641827be137 in blk_remove_bs (blk=0x564185709880) at ../block/block-backend.c:914 > #10 0x00005641827bd689 in blk_remove_all_bs () at ../block/block-backend.c:583 > #11 0x0000564182798699 in bdrv_close_all () at ../block.c:5117 > #12 0x000056418248a5b2 in qemu_cleanup () at ../softmmu/runstate.c:821 > #13 0x0000564182738603 in qemu_default_main () at ../softmmu/main.c:38 > #14 0x0000564182738631 in main (argc=30, argv=0x7ffd675a8a48) at ../softmmu/main.c:48 > > (gdb) p *((QemuMutex*)0x5641856f2a00) > $1 = {lock = {__data = {__lock = 2, __count = 2, __owner = 135952, ... > (gdb) p *((QemuMutex*)0x564183365f00) > $2 = {lock = {__data = {__lock = 2, __count = 0, __owner = 135944, ... [1]: > Thread 1 "qemu-system-x86" hit Breakpoint 5, bdrv_drain_all_end () at ../block/io.c:551 > #0 bdrv_drain_all_end () at ../block/io.c:551 > #1 0x00005569810f0376 in bdrv_graph_wrlock (bs=0x0) at ../block/graph-lock.c:156 > #2 0x00005569810bd3e0 in bdrv_replace_child_noperm (child=0x556982e2d7d0, new_bs=0x0) at ../block.c:2897 > #3 0x00005569810bdef2 in bdrv_root_unref_child (child=0x556982e2d7d0) at ../block.c:3227 > #4 0x00005569810e8137 in blk_remove_bs (blk=0x556982e42880) at ../block/block-backend.c:914 > #5 0x00005569810e7689 in blk_remove_all_bs () at ../block/block-backend.c:583 > #6 0x00005569810c2699 in bdrv_close_all () at ../block.c:5117 > #7 0x0000556980db45b2 in qemu_cleanup () at ../softmmu/runstate.c:821 > #8 0x0000556981062603 in qemu_default_main () at ../softmmu/main.c:38 > #9 0x0000556981062631 in main (argc=30, argv=0x7ffd7a82a418) at ../softmmu/main.c:48 > [Switching to Thread 0x7fe76dab2700 (LWP 103649)] > > Thread 3 "qemu-system-x86" hit Breakpoint 4, blk_inc_in_flight (blk=0x556982e42880) at ../block/block-backend.c:1505 > #0 blk_inc_in_flight (blk=0x556982e42880) at ../block/block-backend.c:1505 > #1 0x00005569810e8f36 in blk_wait_while_drained (blk=0x556982e42880) at ../block/block-backend.c:1312 > #2 0x00005569810e9231 in blk_co_do_pwritev_part (blk=0x556982e42880, offset=3422961664, bytes=4096, qiov=0x556983028060, qiov_offset=0, flags=0) at ../block/block-backend.c:1402 > #3 0x00005569810e9a4b in blk_aio_write_entry (opaque=0x556982e2cfa0) at ../block/block-backend.c:1628 > #4 0x000055698128038a in coroutine_trampoline (i0=-2090057872, i1=21865) at ../util/coroutine-ucontext.c:177 > #5 0x00007fe770f50d40 in ?? () from /lib/x86_64-linux-gnu/libc.so.6 > #6 0x00007ffd7a829570 in ?? () > #7 0x0000000000000000 in ?? () Signed-off-by: Fiona Ebner <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

尚不支持最新RVV指令 #4

尚不支持最新RVV指令 #4

xingmingjie commented Jun 24, 2020

lazyparser commented Jul 4, 2020

liweiwei90 commented Aug 7, 2020

尚不支持最新RVV指令 #4

尚不支持最新RVV指令 #4

Comments

xingmingjie commented Jun 24, 2020

lazyparser commented Jul 4, 2020

liweiwei90 commented Aug 7, 2020