ACPICA: Fix operand resolution

.gitignore

@@ -75,7 +75,9 @@ modules.order
 #
 # Debian directory (make deb-pkg)
 #
-/debian/
+#/debian/
+/debian/build/
+/debian/files
 
 #
 # Snap directory (make snap-pkg)

Documentation/ABI/testing/sysfs-ata

@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -430,6 +430,7 @@ Description:	Show status of f2fs superblock in real time.
 		0x800  SBI_QUOTA_SKIP_FLUSH  skip flushing quota in current CP
 		0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
 		0x2000 SBI_IS_RESIZEFS       resizefs is in process
+		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio

Documentation/accounting/psi.rst

@@ -37,11 +37,7 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such::
-
-	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-
-and for memory and IO::
+The format is as such::
 
 	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
@@ -58,6 +54,9 @@ situation from a state where some tasks are stalled but the CPU is
 still doing productive work. As such, time spent in this subset of the
 stall state is tracked separately and exported in the "full" averages.
 
+CPU full is undefined at the system level, but has been reported
+since 5.13, so it is set to zero for backward compatibility.
+
 The ratios (in %) are tracked as recent trends over ten, sixty, and
 three hundred second windows, which gives insight into short term events
 as well as medium and long term trends. The total absolute stall time

Documentation/admin-guide/kernel-parameters.txt

@@ -3485,8 +3485,7 @@
 			difficult since unequal pointers can no longer be
 			compared.  However, if this command-line option is
 			specified, then all normal pointers will have their true
-			value printed.  Pointers printed via %pK may still be
-			hashed.  This option should only be specified when
+			value printed. This option should only be specified when
 			debugging the kernel.  Please do not use on production
 			kernels.
 
@@ -4356,6 +4355,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	randomize_kstack_offset=
 			[KNL] Enable or disable kernel stack offset
 			randomization, which provides roughly 5 bits of

Documentation/admin-guide/sysctl/kernel.rst

@@ -795,6 +795,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1024,28 +1025,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space

Documentation/arm64/silicon-errata.rst

@@ -189,6 +189,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/conf.py

@@ -161,7 +161,7 @@
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:

Documentation/devicetree/bindings/display/sitronix,st7735r.yaml

@@ -72,6 +72,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 

Documentation/devicetree/bindings/gpio/gpio-altera.txt

@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };

Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml

@@ -92,6 +92,10 @@ properties:
     description: AMS Controller register space
     maxItems: 1
 
+  clocks:
+    items:
+      - description: AMS reference clock
+
   ranges:
     description:
       Maps the child address space for PS and/or PL.
@@ -181,12 +185,15 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
   - ranges
 
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
     bus {
         #address-cells = <2>;
         #size-cells = <2>;
@@ -196,6 +203,7 @@ examples:
             interrupt-parent = <&gic>;
             interrupts = <0 56 4>;
             reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
             #address-cells = <1>;
             #size-cells = <1>;
             #io-channel-cells = <1>;

Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml

@@ -49,7 +49,8 @@ properties:
     description: Definition of the regulator used for the VDDD power supply.
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
 
     properties:
       endpoint:
@@ -68,8 +69,11 @@ properties:
                   - const: 1
                   - const: 2
 
+          link-frequencies: true
+
         required:
           - data-lanes
+          - link-frequencies
 
 required:
   - compatible

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml

@@ -88,10 +88,9 @@ allOf:
               - mediatek,mt2701-smi-common
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
@@ -108,10 +107,9 @@ allOf:
       required:
         - mediatek,smi
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
@@ -133,10 +131,9 @@ allOf:
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 4
-            maxItems: 4
+        clocks:
+          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: apb
@@ -146,10 +143,9 @@ allOf:
 
     else:  # for gen2 HW that don't have gals
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml

@@ -79,22 +79,21 @@ allOf:
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
             - const: gals
 
     else:
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
@@ -108,7 +107,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 

Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml

@@ -24,9 +24,9 @@ description: |
 properties:
   compatible:
     enum:
+      - snps,ddrc-3.80a
       - xlnx,zynq-ddrc-a05
       - xlnx,zynqmp-ddrc-2.40a
-      - snps,ddrc-3.80a
 
   interrupts:
     maxItems: 1
@@ -43,7 +43,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: xlnx,zynqmp-ddrc-2.40a
+            enum:
+              - snps,ddrc-3.80a
+              - xlnx,zynqmp-ddrc-2.40a
     then:
       required:
         - interrupts

Documentation/devicetree/bindings/mtd/nand-controller.yaml

@@ -55,7 +55,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-engine:
         allOf:
@@ -184,7 +184,7 @@ examples:
         nand-use-soft-ecc-engine;
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
 
       nand@1 {

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -53,20 +53,18 @@ properties:
         - allwinner,sun8i-r40-gmac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - ingenic,jz4775-mac
         - ingenic,x1000-mac
         - ingenic,x1600-mac
         - ingenic,x1830-mac
         - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac