ALSA: hda - Improv 3.5mm hotplug on ROG strix B550 #170
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 7a9214f ] The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by: Jonathan Toppins <[email protected]> Signed-off-by: Jay Vosburgh <[email protected]> Fixes: b092991 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/[email protected]/ Tested-by: Jonathan Toppins <[email protected]> Reviewed-by: Jonathan Toppins <[email protected]> Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a3bb7b6 ] Function fallback_set_params() checks if the module type returned by a driver is ETH_MODULE_SFF_8079 and in this case it assumes that buffer returns a concatenated content of page A0h and A2h. The check is wrong because the correct type is ETH_MODULE_SFF_8472. Fixes: 96d971e ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…orms [ Upstream commit a2b1a5d ] As reported by Yuming, currently tc always show a latency of UINT_MAX for netem Qdisc's on 32-bit platforms: $ tc qdisc add dev dummy0 root netem latency 100ms $ tc qdisc show dev dummy0 qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s ^^^^^^^^^^^^^^^^ Let us take a closer look at netem_dump(): qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency, UINT_MAX); qopt.latency is __u32, psched_tdiff_t is signed long, (psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so qopt.latency is always UINT_MAX. Fix it by using psched_time_t (u64) instead. Note: confusingly, users have two ways to specify 'latency': 1. normally, via '__u32 latency' in struct tc_netem_qopt; 2. via the TCA_NETEM_LATENCY64 attribute, which is s64. For the second case, theoretically 'latency' could be negative. This patch ignores that corner case, since it is broken (i.e. assigning a negative s64 to __u32) anyways, and should be handled separately. Thanks Ted Lin for the analysis [1] . [1] raspberrypi/linux#3512 Reported-by: Yuming Chen <[email protected]> Fixes: 112f9cb ("netem: convert to qdisc_watchdog_schedule_ns") Reviewed-by: Cong Wang <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Acked-by: Stephen Hemminger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b9cc459 ] of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 86418f9 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/488473/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…splay_unbind() [ Upstream commit d80c3ba ] During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. In this case, core_initialized flag had to be check to make sure clocks is on before update DP controller register to disable HPD interrupts. Otherwise system will crash due to below NOC fatal error. QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007 QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007 QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024 QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042 QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002 QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001 QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006 QTISECLIB [01f23dfd3]NOC error fatal changes in v2: -- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch Fixes: 570d3e5 ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/488387/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a6e2af6 ] Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state. However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel. This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function. Changes in v2: -- set force_link_train flag on DP only (is_edp == false) Changes in v3: -- revise commit text -- add Fixes tag Changes in v4: -- revise commit text Changes in v5: -- fix spelling at commit text Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset Changes in v7: -- drop 0 assignment at local variable (ret = 0) Changes in v8: -- add patch to remove pixel_rate from dp_ctrl Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report() Fixes: 62671d2 ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9926de7 ] Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f42 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
… are complete in fp mode" test [ Upstream commit 72dcae8 ] The testcase 'Check Arm64 callgraphs are complete in fp mode' wants to see the following output: 610 leaf 62f parent 648 main However, without excluding kernel callchains, the output might look like: ffffc2ff40ef1b5c arch_local_irq_enable ffffc2ff419d032c __schedule ffffc2ff419d06c0 schedule ffffc2ff40e4da30 do_notify_resume ffffc2ff40e421b0 work_pending 610 leaf 62f parent 648 main Adding '--user-callchains' leaves only the wanted symbols in the chain. Fixes: cd6382d ("perf test arm64: Test unwinding using fame-pointer (fp) mode") Suggested-by: German Gomez <[email protected]> Reviewed-by: German Gomez <[email protected]> Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Michael Petlan <[email protected]> Cc: German Gomez <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…parision check [ Upstream commit b236371 ] commit cfd7092 ("perf test session topology: Fix test to skip the test in guest environment") added check to skip the testcase if the socket_id can't be fetched from topology info. But the condition check uses strncmp which should be changed to !strncmp and to correctly match platform. Fix this condition check. Fixes: cfd7092 ("perf test session topology: Fix test to skip the test in guest environment") Reported-by: Thomas Richter <[email protected]> Signed-off-by: Athira Jajeev <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Disha Goel <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: [email protected] Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 51ba539 ] Except for memory load and store operations, ARM SPE records also can support other operation types, bug when set the data source field the current code assumes a record is a either load operation or store operation, this leads to wrongly synthesize memory samples. This patch strictly checks the record operation type, it only sets data source only for the operation types ARM_SPE_LD and ARM_SPE_ST, otherwise, returns zero for data source. Therefore, we can synthesize memory samples only when data source is a non-zero value, the function arm_spe__is_memory_event() is useless and removed. Fixes: e55ed34 ("perf arm-spe: Synthesize memory event") Reviewed-by: Ali Saidi <[email protected]> Reviewed-by: German Gomez <[email protected]> Signed-off-by: Leo Yan <[email protected]> Tested-by: Ali Saidi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: [email protected] Cc: Andrew Kilroy <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Leo Yan <[email protected]> Cc: Li Huafei <[email protected]> Cc: [email protected] Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Forrington <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 313c502 ] Commit 8ff978b ("ipv4/raw: support binding to nonlocal addresses") introduces support for binding to nonlocal addresses, as well as some basic test coverage for some of the related cases. Commit b4a028c ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. It also introduces new set_sysctl calls for the ipv4_bind test group, as to perform the ICMP binding tests it is necessary to allow ICMP socket creation by setting the net.ipv4.ping_group_range knob. Fixes: b4a028c ("ipv4: ping: fix bind address validity check") Reported-by: Riccardo Paolo Bestetti <[email protected]> Signed-off-by: Riccardo Paolo Bestetti <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 301bd14 ] Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Fixes: d5db21a ("erspan: auto detect truncated ipv6 packets.") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 69135c5 ] After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When close the sock, tls_sk_proto_close() is called for sock->sk_prot->close is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly occurred. That will trigger the following bug. ================================================================= KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306 Call Trace: <TASK> tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329 inet_release+0x12e/0x280 net/ipv4/af_inet.c:428 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x18/0x20 net/socket.c:1365 Updating a proto which is same with sock->sk_prot is incorrect. Add proto and sock->sk_prot equality check at the head of tls_update() to fix it. Fixes: 95fa145 ("bpf: sockmap/tls, close can race with map free") Reported-by: [email protected] Signed-off-by: Ziyang Xuan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 05b252c ] Check vm_fault->pgoff before using it. When we removed the warning, we also removed the check. Fixes: 7b26e4e ("udmabuf: drop WARN_ON() check.") Reported-by: [email protected] Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Gerd Hoffmann <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5d79d8a ] Before change: make -C netfilter TEST: performance net,port [SKIP] perf not supported port,net [SKIP] perf not supported net6,port [SKIP] perf not supported port,proto [SKIP] perf not supported net6,port,mac [SKIP] perf not supported net6,port,mac,proto [SKIP] perf not supported net,mac [SKIP] perf not supported After change: net,mac [ OK ] baseline (drop from netdev hook): 2061098pps baseline hash (non-ranged entries): 1606741pps baseline rbtree (match on first field only): 1191607pps set with 1000 full, ranged entries: 1639119pps ok 8 selftests: netfilter: nft_concat_range.sh Fixes: 611973c ("selftests: netfilter: Introduce tests for sets with range concatenation") Reported-by: kernel test robot <[email protected]> Signed-off-by: Jie2x Zhou <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 574a5b8 ] Eric reports skb_under_panic when using dup/fwd via bond+egress hook. Before pushing mac header, we should make sure that we're called from ingress to put back what was pulled earlier. In egress case, the MAC header is already there; we should leave skb alone. While at it be more careful here: skb might have been altered and headroom reduced, so add a skb_cow() before so that headroom is increased if necessary. nf_do_netdev_egress() assumes skb ownership (it normally ends with a call to dev_queue_xmit), so we must free the packet on error. Fixes: f87b946 ("netfilter: nft_fwd_netdev: Support egress hook") Reported-by: Eric Garver <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fcd53c5 ] Now that the egress function can be called from egress hook, we need to avoid recursive calls into the nf_tables traverser, else crash. Fixes: f87b946 ("netfilter: nft_fwd_netdev: Support egress hook") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f9710c3 ] When a VBD is not fully created and then closed, the kernel can have a NULL pointer dereference: The reproducer is trivial: [user@dom0 ~]$ sudo xl block-attach work backend=sys-usb vdev=xvdi target=/dev/sdz [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path 51712 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51712 51728 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51728 51744 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51744 51760 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51760 51840 3 241 3 -1 -1 /local/domain/3/backend/vbd/241/51840 ^ note state, the /dev/sdz doesn't exist in the backend [user@dom0 ~]$ sudo xl block-detach work xvdi [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path work is an invalid domain identifier And its console has: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 80000000edebb067 P4D 80000000edebb067 PUD edec2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Not tainted 5.16.18-2.43.fc32.qubes.x86_64 #1 RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Call Trace: <TASK> blkback_changed+0x95/0x137 [xen_blkfront] ? read_reply+0x160/0x160 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer snd soundcore ipt_REJECT nf_reject_ipv4 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables nfnetlink intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel xen_netfront pcspkr xen_scsiback target_core_mod xen_netback xen_privcmd xen_gntdev xen_gntalloc xen_blkback xen_evtchn ipmi_devintf ipmi_msghandler fuse bpf_preload ip_tables overlay xen_blkfront CR2: 0000000000000050 ---[ end trace 7bc9597fd06ae89d ]--- RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled info->rq and info->gd are only set in blkfront_connect(), which is called for state 4 (XenbusStateConnected). Guard against using NULL variables in blkfront_closing() to avoid the issue. The rest of blkfront_closing looks okay. If info->nr_rings is 0, then for_each_rinfo won't do anything. blkfront_remove also needs to check for non-NULL pointers before cleaning up the gendisk and request queue. Fixes: 05d69d9 "xen-blkfront: sanitize the removal state machine" Reported-by: Marek Marczykowski-Górecki <[email protected]> Signed-off-by: Jason Andryuk <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ecb6237 ] 1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c ("xen: Core Xen implementation") Signed-off-by: Julien Grall <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c81aba8 ] commit 979934d ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd32 ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934d ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by: k2ci <[email protected]> Signed-off-by: huhai <[email protected]> Signed-off-by: Genjian Zhang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cb78d1b ] The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62 Fixes: 2aeb8c8 ("afs: Fix afs_getattr() to refetch file status if callback break occurred") Reported-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Marc Dionne <[email protected]> Tested-by: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2645672 ] If rq_qos_throttle() ends up blocking, then we will have invalidated and flushed our current plug. Since blk_mq_get_cached_request() hasn't popped the cached request off the plug list just yet, we end holding a pointer to a request that is no longer valid. This insta-crashes with rq->mq_hctx being NULL in the validity checks just after. Pop the request off the cached list before doing rq_qos_throttle() to avoid using a potentially stale request. Fixes: 0a5aa8d ("block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection") Reported-by: Dylan Yudaken <[email protected]> Tested-by: Dylan Yudaken <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d4ea6f6 ] Commit 34a8977 ("ice: Add support for inner etype in switchdev") added the ability to match on inner ethertype. A side effect of that change is that it is now impossible to add some filters for protocols which do not contain inner ethtype field. tc requires the protocol field to be specified when providing certain other options, e.g. src_ip. This is a problem in case of GTP - when user wants to specify e.g. src_ip, they also need to specify protocol in tc command (otherwise tc fails with: Illegal "src_ip"). Because GTP is a tunnel, the protocol field is treated as inner protocol. GTP does not contain inner ethtype field and the filter cannot be added. To fix this, ignore the ethertype field in case of GTP filters. Fixes: 9a225f8 ("ice: Support GTP-U and GTP-C offload in switchdev") Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3578dc9 ] Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map). Fixes: 0d08a44 ("ice: ndo_setup_tc implementation for PF") Reported-by: Sridhar Samudrala <[email protected]> Signed-off-by: Wojciech Drewek <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c3d184c ] In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a632b2a ] Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e7 ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c487a5a ] Don't forget to cancel all linked requests of poll request when __io_arm_poll_handler() failed. Fixes: aa43477 ("io_uring: poll rework") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/a78aad962460f9fdfe4aa4c0b62425c88f9415bc.1655852245.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 485037a ] When enabling a type_in_mask irq, the type_buf contents must be AND'd with the mask of the IRQ we're enabling to avoid enabling other IRQs by accident, which can happen if several type_in_mask irqs share a mask register. Fixes: bc998a7 ("regmap: irq: handle HW using separate rising/falling edge interrupts") Signed-off-by: Aidan MacDonald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3f05010 ] We need to divide the sub-irq status register offset by register stride to get an index for the status buffer to avoid an out of bounds write when the register stride is greater than 1. Fixes: a2d2184 ("regmap: regmap-irq: Add main status register support") Signed-off-by: Aidan MacDonald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9f7d09f ] Fix compatible string for R-Car Gen4. Fixes: ae684ca ("iommu/ipmmu-vmsa: Add support for R-Car Gen4") Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <[email protected]>
This patch was written by Takashi Iwai, I am just commiting it into the pop-os kernel before this is upstreamed
Asus released motherboard(s) with an alternate ALC4080 that lacks a SPDIF jack, and requires applying this map.
Fixes headset detection on Clevo L140PU. Signed-off-by: Tim Crawford <[email protected]>
….202207071639 Signed-off-by: 13r0ck <[email protected]>
The Aorus Xtreme uses the same ID for audio controller, but the maps are very different. This successfully fixes all of the audio jacks on the back.
Rewrite mixer map for TRX40 Aorus Master
Fixes headset detection on Clevo NV41PZ. Signed-off-by: Tim Crawford <[email protected]>
|
So by removing |
13r0ck
force-pushed
the
thelio-r3
branch
2 times, most recently
from
075cb97
to
83f9ab7
Compare
When plugging of unplugging an audio jack on this motherbaord, sometimes the audio jacks would stop appearing to pipewire/pulseaudio. Interestingly `cat`-ing out the file `/proc/asound/<card number>/codec#0`, and or restarting pipewire fixes the issue temporarily. This PR improves the current functionality by making hotplug with one 3.5mm jack work, it still breaks if hotplug is between multiple jacks though.
|
Good point. I modified the commit to only effect systems with the same pci id. With that change I believe that this will only effect desktops, that is what the original commit and linked issue appear to suggest de768ce |
bflanagin
reviewed
Aug 16, 2022
There was a problem hiding this comment.
This is a definite improvement. Line out now works as expected. However, if you have a mic plugged in to mic in, and for some reason you toggle (unplug / plug in) line out the mic stops working until it has been toggled as well.
This isn't the expected behavior, but I don't know if it is a blocker or not.
|
Force pushing for the release of 5.19 broke this PR, this is superseded by #171 |
mmstick
pushed a commit
that referenced
this pull request
Jul 6, 2024
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
When plugging of unplugging an audio jack on this motherbaord,
sometimes the audio jacks would stop appearing to
pipewire/pulseaudio. Interestingly
cat-ing out the file/proc/asound/<card number>/codec#0, and or restarting pipewirefixes the issue temporarily.
This PR improves the current functionality by making hotplug with
one 3.5mm jack work, it still breaks if hotplug is between multiple
jacks though.
@pop-os/quality-assurance please check with Eva+Tony if this is
good enough for now to ship while I look into possible better solutions.