Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Link: https://lore.kernel.org/r/[email protected] Tested-by: Shuah Khan <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Jon Hunter <[email protected]> net/sched: Retire rsvp classifier commit 265b4da82dbf5df04bee5a5d46b7474b1aaf326a upstream. The rsvp classifier has served us well for about a quarter of a century but has has not been getting much maintenance attention due to lack of known users. Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Kyle Zeng <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> drm/amdgpu: fix amdgpu_cs_p1_user_fence commit 35588314e963938dfdcdb792c9170108399377d6 upstream. The offset is just 32bits here so this can potentially overflow if somebody specifies a large value. Instead reduce the size to calculate the last possible offset. The error handling path incorrectly drops the reference to the user fence BO resulting in potential reference count underflow. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b upstream. v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support") Signed-off-by: William Zhang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Cc: [email protected] Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> ext4: fix rec_len verify error commit 7fda67e8c3ab6069f75888f67958a6d30454a9f6 upstream. With the configuration PAGE_SIZE 64k and filesystem blocksize 64k, a problem occurred when more than 13 million files were directly created under a directory: EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D. EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D. EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum When enough files are created, the fake_dirent->reclen will be 0xffff. it doesn't equal to the blocksize 65536, i.e. 0x10000. But it is not the same condition when blocksize equals to 4k. when enough files are created, the fake_dirent->reclen will be 0x1000. it equals to the blocksize 4k, i.e. 0x1000. The problem seems to be related to the limitation of the 16-bit field when the blocksize is set to 64k. To address this, helpers like ext4_rec_len_{from,to}_disk has already been introduced to complete the conversion between the encoded and the plain form of rec_len. So fix this one by using the helper, and all the other in this file too. Cc: [email protected] Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Suggested-by: Andreas Dilger <[email protected]> Suggested-by: Darrick J. Wong <[email protected]> Signed-off-by: Shida Zhang <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> scsi: megaraid_sas: Fix deadlock on firmware crashdump commit 0b0747d507bffb827e40fc0f9fb5883fffc23477 upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> i2c: aspeed: Reset the i2c controller when timeout occurs commit fee465150b458351b6d9b9f66084f3cc3022b88b upstream. Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: <[email protected]> # v5.1+ Signed-off-by: Tommy Huang <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> tracefs: Add missing lockdown check to tracefs_create_dir() commit 51aab5ffceb43e05119eb059048fd75765d2bc21 upstream. The function tracefs_create_dir() was missing a lockdown check and was called by the RV code. This gave an inconsistent behavior of this function returning success while other tracefs functions failed. This caused the inode being freed by the wrong kmem_cache. Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Ajay Kaher <[email protected]> Cc: Ching-lin Yu <[email protected]> Fixes: bf8e602186ec4 ("tracing: Do not create tracefs files if tracefs lockdown is in effect") Reported-by: kernel test robot <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> nfsd: fix change_info in NFSv4 RENAME replies commit fdd2630a7398191e84822612e589062063bd4f3d upstream. nfsd sends the transposed directory change info in the RENAME reply. The source directory is in save_fh and the target is in current_fh. Reported-by: Zhi Li <[email protected]> Reported-by: Benjamin Coddington <[email protected]> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2218844 Signed-off-by: Jeff Layton <[email protected]> Cc: <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> tracing: Have option files inc the trace array ref count commit 7e2cfbd2d3c86afcd5c26b5c4b1dd251f63c5838 upstream. The option files update the options for a given trace array. For an instance, if the file is opened and the instance is deleted, reading or writing to the file will cause a use after free. Up the ref count of the trace_array when an option file is opened. Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Zheng Yejian <[email protected]> Fixes: 8530dec63e7b4 ("tracing: Add tracing_check_open_get_tr()") Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Naresh Kamboju <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> tracing: Have current_trace inc the trace array ref count commit 9b37febc578b2e1ad76a105aab11d00af5ec3d27 upstream. The current_trace updates the trace array tracer. For an instance, if the file is opened and the instance is deleted, reading or writing to the file will cause a use after free. Up the ref count of the trace array when current_trace is opened. Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Zheng Yejian <[email protected]> Fixes: 8530dec63e7b4 ("tracing: Add tracing_check_open_get_tr()") Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Naresh Kamboju <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> btrfs: fix lockdep splat and potential deadlock after failure running delayed items commit e110f8911ddb93e6f55da14ccbbe705397b30d0b upstream. When running delayed items we are holding a delayed node's mutex and then we will attempt to modify a subvolume btree to insert/update/delete the delayed items. However if have an error during the insertions for example, btrfs_insert_delayed_items() may return with a path that has locked extent buffers (a leaf at the very least), and then we attempt to release the delayed node at __btrfs_run_delayed_items(), which requires taking the delayed node's mutex, causing an ABBA type of deadlock. This was reported by syzbot and the lockdep splat is the following: WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Not tainted ------------------------------------------------------ syz-executor.2/13257 is trying to acquire lock: ffff88801835c0c0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 but task is already holding lock: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: __lock_release kernel/locking/lockdep.c:5475 [inline] lock_release+0x36f/0x9d0 kernel/locking/lockdep.c:5781 up_write+0x79/0x580 kernel/locking/rwsem.c:1625 btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline] btrfs_unlock_up_safe+0x179/0x3b0 fs/btrfs/locking.c:239 search_leaf fs/btrfs/ctree.c:1986 [inline] btrfs_search_slot+0x2511/0x2f80 fs/btrfs/ctree.c:2230 btrfs_insert_empty_items+0x9c/0x180 fs/btrfs/ctree.c:4376 btrfs_insert_delayed_item fs/btrfs/delayed-inode.c:746 [inline] btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline] __btrfs_commit_inode_delayed_items+0xd24/0x2410 fs/btrfs/delayed-inode.c:1111 __btrfs_run_delayed_items+0x1db/0x430 fs/btrfs/delayed-inode.c:1153 flush_space+0x269/0xe70 fs/btrfs/space-info.c:723 btrfs_async_reclaim_metadata_space+0x106/0x350 fs/btrfs/space-info.c:1078 process_one_work+0x92c/0x12c0 kernel/workqueue.c:2600 worker_thread+0xa63/0x1210 kernel/workqueue.c:2751 kthread+0x2b8/0x350 kernel/kthread.c:389 ret_from_fork+0x2e/0x60 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603 __mutex_lock kernel/locking/mutex.c:747 [inline] mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799 __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156 btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276 btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988 vfs_fsync_range fs/sync.c:188 [inline] vfs_fsync fs/sync.c:202 [inline] do_fsync fs/sync.c:212 [inline] __do_sys_fsync fs/sync.c:220 [inline] __se_sys_fsync fs/sync.c:218 [inline] __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-00); lock(&delayed_node->mutex); lock(btrfs-tree-00); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by syz-executor.2/13257: #0: ffff88802c1ee370 (btrfs_trans_num_writers){++++}-{0:0}, at: spin_unlock include/linux/spinlock.h:391 [inline] #0: ffff88802c1ee370 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0xb87/0xe00 fs/btrfs/transaction.c:287 #1: ffff88802c1ee398 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0xbb2/0xe00 fs/btrfs/transaction.c:288 #2: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198 stack backtrace: CPU: 0 PID: 13257 Comm: syz-executor.2 Not tainted 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195 check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603 __mutex_lock kernel/locking/mutex.c:747 [inline] mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799 __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156 btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276 btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988 vfs_fsync_range fs/sync.c:188 [inline] vfs_fsync fs/sync.c:202 [inline] do_fsync fs/sync.c:212 [inline] __do_sys_fsync fs/sync.c:220 [inline] __se_sys_fsync fs/sync.c:218 [inline] __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f3ad047cae9 Code: 28 00 00 00 75 (...) RSP: 002b:00007f3ad12510c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 00007f3ad059bf80 RCX: 00007f3ad047cae9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007f3ad04c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f3ad059bf80 R15: 00007ffe56af92f8 </TASK> ------------[ cut here ]------------ Fix this by releasing the path before releasing the delayed node in the error path at __btrfs_run_delayed_items(). Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ CC: [email protected] # 4.14+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> attr: block mode changes of symlinks commit 5d1f903f75a80daa4dfb3d84e114ec8ecbf29956 upstream. Changing the mode of symlinks is meaningless as the vfs doesn't take the mode of a symlink into account during path lookup permission checking. However, the vfs doesn't block mode changes on symlinks. This however, has lead to an untenable mess roughly classifiable into the following two categories: (1) Filesystems that don't implement a i_op->setattr() for symlinks. Such filesystems may or may not know that without i_op->setattr() defined, notify_change() falls back to simple_setattr() causing the inode's mode in the inode cache to be changed. That's a generic issue as this will affect all non-size changing inode attributes including ownership changes. Example: afs (2) Filesystems that fail with EOPNOTSUPP but change the mode of the symlink nonetheless. Some filesystems will happily update the mode of a symlink but still return EOPNOTSUPP. This is the biggest source of confusion for userspace. The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it comes from filesystems that call posix_acl_chmod(), e.g., btrfs via if (!err && attr->ia_valid & ATTR_MODE) err = posix_acl_chmod(idmap, dentry, inode->i_mode); Filesystems including btrfs don't implement i_op->set_acl() so posix_acl_chmod() will report EOPNOTSUPP. When posix_acl_chmod() is called, most filesystems will have finished updating the inode. Perversely, this has the consequences that this behavior may depend on two kconfig options and mount options: * CONFIG_POSIX_ACL={y,n} * CONFIG_${FSTYPE}_POSIX_ACL={y,n} * Opt_acl, Opt_noacl Example: btrfs, ext4, xfs The only way to change the mode on a symlink currently involves abusing an O_PATH file descriptor in the following manner: fd = openat(-1, "/path/to/link", O_CLOEXEC | O_PATH | O_NOFOLLOW); char path[PATH_MAX]; snprintf(path, sizeof(path), "/proc/self/fd/%d", fd); chmod(path, 0000); But for most major filesystems with POSIX ACL support such as btrfs, ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with the mode still updated due to the aforementioned posix_acl_chmod() nonsense. So, given that for all major filesystems this would fail with EOPNOTSUPP and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode changes on symlinks we should just try and block mode changes on symlinks directly in the vfs and have a clean break with this nonsense. If this causes any regressions, we do the next best thing and fix up all filesystems that do return EOPNOTSUPP with the mode updated to not call posix_acl_chmod() on symlinks. But as usual, let's try the clean cut solution first. It's a simple patch that can be easily reverted. Not marking this for backport as I'll do that manually if we're reasonably sure that this works and there are no strong objections. We could block this in chmod_common() but it's more appropriate to do it notify_change() as it will also mean that we catch filesystems that change symlink permissions explicitly or accidently. Similar proposals were floated in the past as in [3] and [4] and again recently in [5]. There's also a couple of bugs about this inconsistency as in [6] and [7]. Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=99527a3727e44cb8661ee1f743068f108ec93979;hb=HEAD [1] Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c [2] Link: https://lore.kernel.org/all/[email protected] [3] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00518.html [4] Link: https://lore.kernel.org/lkml/[email protected] [5] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00467.html [6] Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14578#c17 [7] Reviewed-by: Aleksa Sarai <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: [email protected] # please backport to all LTSes but not before v6.6-rc2 is tagged Suggested-by: Christoph Hellwig <[email protected]> Suggested-by: Florian Weimer <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> md/raid1: fix error: ISO C90 forbids mixed declarations [ Upstream commit df203da47f4428bc286fc99318936416253a321c ] There is a compile error when this commit is added: md: raid1: fix potential OOB in raid1_remove_disk() drivers/md/raid1.c: In function 'raid1_remove_disk': drivers/md/raid1.c:1844:9: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement] 1844 | struct raid1_info *p = conf->mirrors + number; | ^~~~~~ That's because the new code was inserted before the struct. The change is move the struct command above this commit. Fixes: 8b0472b50bcf ("md: raid1: fix potential OOB in raid1_remove_disk()") Signed-off-by: Nigel Croxon <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> selftests: tracing: Fix to unmount tracefs for recovering environment [ Upstream commit 7e021da80f48582171029714f8a487347f29dddb ] Fix to unmount the tracefs if the ftracetest mounted it for recovering system environment. If the tracefs is already mounted, this does nothing. Suggested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel") Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Reviewed-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]> btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super [ Upstream commit 6bfe3959b0e7a526f5c64747801a8613f002f05a ] The function btrfs_validate_super() should verify the metadata_uuid in the provided superblock argument. Because, all its callers expect it to do that. Such as in the following stacks: write_all_supers() sb = fs_info->super_for_commit; btrfs_validate_write_super(.., sb) btrfs_validate_super(.., sb, ..) scrub_one_super() btrfs_validate_super(.., sb, ..) And check_dev_super() btrfs_validate_super(.., sb, ..) However, it currently verifies the fs_info::super_copy::metadata_uuid instead. Fix this using the correct metadata_uuid in the superblock argument. CC: [email protected] # 5.4+ Reviewed-by: Johannes Thumshirn <[email protected]> Tested-by: Guilherme G. Piccoli <[email protected]> Signed-off-by: Anand Jain <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]> btrfs: add a helper to read the superblock metadata_uuid [ Upstream commit 4844c3664a72d36cc79752cb651c78860b14c240 ] In some cases, we need to read the FSID from the superblock when the metadata_uuid is not set, and otherwise, read the metadata_uuid. So, add a helper. Reviewed-by: Johannes Thumshirn <[email protected]> Tested-by: Guilherme G. Piccoli <[email protected]> Signed-off-by: Anand Jain <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super") Signed-off-by: Sasha Levin <[email protected]> btrfs: move btrfs_pinned_by_swapfile prototype into volumes.h [ Upstream commit c2e79e865b87c2920a3cd39de69c35f2bc758a51 ] This is defined in volumes.c, move the prototype into volumes.h. Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super") Signed-off-by: Sasha Levin <[email protected]> perf tools: Add an option to build without libbfd [ Upstream commit 0d1c50ac488ebdaeeaea8ed5069f8d435fd485ed ] Some distributions, like debian, don't link perf with libbfd. Add a build flag to make this configuration buildable and testable. This was inspired by: https://lore.kernel.org/linux-perf-users/[email protected]/T/#u Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: tony garnock-jones <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Stable-dep-of: 7822a8913f4c ("perf build: Update build rule for generated files") Signed-off-by: Sasha Levin <[email protected]> perf jevents: Make build dependency on test JSONs [ Upstream commit 517db3b59537a59f6cc251b1926df93e93bb9c87 ] Currently all JSONs and the mapfile for an arch are dependencies for building pmu-events.c The test JSONs are missing as a dependency, so add them. Signed-off-by: John Garry <[email protected]> Reported-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Stable-dep-of: 7822a8913f4c ("perf build: Update build rule for generated files") Signed-off-by: Sasha Levin <[email protected]> tools features: Add feature test to check if libbfd has buildid support [ Upstream commit e71e19a9ea70952a53d58a99971820ce6c1794a8 ] Which is needed by the PE executable support, for instance. Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jacek Caban <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Remi Bernon <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Stable-dep-of: 7822a8913f4c ("perf build: Update build rule for generated files") Signed-off-by: Sasha Levin <[email protected]> kobject: Add sanity check for kset->kobj.ktype in kset_register() [ Upstream commit 4d0fe8c52bb3029d83e323c961221156ab98680b ] When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset); A null pointer dereference exception is occurred: [ 4453.568337] Unable to handle kernel NULL pointer dereference at \ virtual address 0000000000000028 ... ... [ 4453.810361] Call trace: [ 4453.813062] kobject_get_ownership+0xc/0x34 [ 4453.817493] kobject_add_internal+0x98/0x274 [ 4453.822005] kset_register+0x5c/0xb4 [ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset] ... ... Because I didn't initialize my_kset.kobj.ktype. According to the description in Documentation/core-api/kobject.rst: - A ktype is the type of object that embeds a kobject. Every structure that embeds a kobject needs a corresponding ktype. So add sanity check to make sure kset->kobj.ktype is not NULL. Signed-off-by: Zhen Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: pci: ipu3-cio2: Initialise timing struct to avoid a compiler warning [ Upstream commit 9d7531be3085a8f013cf173ccc4e72e3cf493538 ] Initialise timing struct in cio2_hw_init() to zero in order to avoid a compiler warning. The warning was a false positive. Reported-by: Hans Verkuil <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> serial: cpm_uart: Avoid suspicious locking [ Upstream commit 36ef11d311f405e55ad8e848c19b212ff71ef536 ] CHECK drivers/tty/serial/cpm_uart/cpm_uart_core.c drivers/tty/serial/cpm_uart/cpm_uart_core.c:1271:39: warning: context imbalance in 'cpm_uart_console_write' - unexpected unlock Allthough 'nolock' is not expected to change, sparse find the following form suspicious: if (unlikely(nolock)) { local_irq_save(flags); } else { spin_lock_irqsave(&pinfo->port.lock, flags); } cpm_uart_early_write(pinfo, s, count, true); if (unlikely(nolock)) { local_irq_restore(flags); } else { spin_unlock_irqrestore(&pinfo->port.lock, flags); } Rewrite it a more obvious form: if (unlikely(oops_in_progress)) { local_irq_save(flags); cpm_uart_early_write(pinfo, s, count, true); local_irq_restore(flags); } else { spin_lock_irqsave(&pinfo->port.lock, flags); cpm_uart_early_write(pinfo, s, count, true); spin_unlock_irqrestore(&pinfo->port.lock, flags); } Signed-off-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/r/f7da5cdc9287960185829cfef681a7d8614efa1f.1691068700.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show() [ Upstream commit 801f287c93ff95582b0a2d2163f12870a2f076d4 ] The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries. Signed-off-by: Konstantin Shelekhin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> usb: gadget: fsl_qe_udc: validate endpoint index for ch9 udc [ Upstream commit ce9daa2efc0872a9a68ea51dc8000df05893ef2e ] We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array. Signed-off-by: Ma Ke <[email protected]> Acked-by: Li Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: pci: cx23885: replace BUG with error return [ Upstream commit 2e1796fd4904fdd6062a8e4589778ea899ea0c8d ] It was completely unnecessary to use BUG in buffer_prepare(). Just replace it with an error return. This also fixes a smatch warning: drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: tuners: qt1010: replace BUG_ON with a regular error [ Upstream commit ee630b29ea44d1851bb6c903f400956604834463 ] BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: az6007: Fix null-ptr-deref in az6007_i2c_xfer() [ Upstream commit 1047f9343011f2cedc73c64829686206a7e9fc3f ] In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach az6007_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: anysee: fix null-ptr-deref in anysee_master_xfer [ Upstream commit c30411266fd67ea3c02a05c157231654d5a3bdc9 ] In anysee_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach anysee_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [hverkuil: add spaces around +] Signed-off-by: Sasha Levin <[email protected]> media: af9005: Fix null-ptr-deref in af9005_i2c_xfer [ Upstream commit f4ee84f27625ce1fdf41e8483fa0561a1b837d10 ] In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer() [ Upstream commit 5ae544d94abc8ff77b1b9bf8774def3fa5689b5b ] In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252cb469 ("[media] dw2102: limit messages to buffer size") Signed-off-by: Zhang Shurong <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer [ Upstream commit 7bf744f2de0a848fb1d717f5831b03db96feae89 ] In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]> [ moved variable declaration to fix build issues in older kernels - gregkh ] Signed-off-by: Greg Kroah-Hartman <[email protected]> powerpc/pseries: fix possible memory leak in ibmebus_bus_init() [ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ] If device_register() returns error in ibmebus_bus_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Signed-off-by: ruanjinjie <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]> jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount [ Upstream commit 6e2bda2c192d0244b5a78b787ef20aa10cb319b7 ] syzbot found an invalid-free in diUnmount: BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674 Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount. If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount(). JFS_IP(ipimap)->i_imap will be freed once again. Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free. Reported-by: [email protected] Signed-off-by: Liu Shixin <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]> fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount() [ Upstream commit cade5397e5461295f3cb87880534b6a07cafa427 ] Syzkaller reported the following issue: ================================================================== BUG: KASAN: double-free in slab_free mm/slub.c:3787 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3800 Free of addr ffff888086408000 by task syz-executor.4/12750 [...] Call Trace: <TASK> [...] kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:482 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1807 slab_free mm/slub.c:3787 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3800 dbUnmount+0xf4/0x110 fs/jfs/jfs_dmap.c:264 jfs_umount+0x248/0x3b0 fs/jfs/jfs_umount.c:87 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1386 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1291 task_work_run+0x243/0x300 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop+0x124/0x150 kernel/entry/common.c:171 exit_to_user_mode_prepare+0xb2/0x140 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x26/0x60 kernel/entry/common.c:296 do_syscall_64+0x49/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> Allocated by task 13352: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:580 [inline] dbMount+0x54/0x980 fs/jfs/jfs_dmap.c:164 jfs_mount+0x1dd/0x830 fs/jfs/jfs_mount.c:121 jfs_fill_super+0x590/0xc50 fs/jfs/super.c:556 mount_bdev+0x26c/0x3a0 fs/super.c:1359 legacy_get_tree+0xea/0x180 fs/fs_context.c:610 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 13352: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 kasan_save_free_info+0x27/0x40 mm/kasan/generic.c:518 ____kasan_slab_free+0xd6/0x120 mm/kasan/common.c:236 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1807 slab_free mm/slub.c:3787 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3800 dbUnmount+0xf4/0x110 fs/jfs/jfs_dmap.c:264 jfs_mount_rw+0x545/0x740 fs/jfs/jfs_mount.c:247 jfs_remount+0x3db/0x710 fs/jfs/super.c:454 reconfigure_super+0x3bc/0x7b0 fs/super.c:935 vfs_fsconfig_locked fs/fsopen.c:254 [inline] __do_sys_fsconfig fs/fsopen.c:439 [inline] __se_sys_fsconfig+0xad5/0x1060 fs/fsopen.c:314 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_SBI(ipbmap->i_sb)->bmap wasn't set to NULL after kfree() in dbUnmount(). Syzkaller uses faultinject to reproduce this KASAN double-free warning. The issue is triggered if either diMount() or dbMount() fail in jfs_remount(), since diUnmount() or dbUnmount() already happened in such a case - they will do double-free on next execution: jfs_umount or jfs_remount. Tested on both upstream and jfs-next by syzkaller. Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T/ Link: https://syzkaller.appspot.com/bug?extid=6a93efb725385bc4b2e9 Signed-off-by: Andrew Kanner <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]> ext2: fix datatype of block number in ext2_xattr_set2() [ Upstream commit e88076348425b7d0491c8c98d8732a7df8de7aa3 ] I run a small server that uses external hard drives for backups. The backup software I use uses ext2 filesystems with 4KiB block size and the server is running SELinux and therefore relies on xattr. I recently upgraded the hard drives from 4TB to 12TB models. I noticed that after transferring some TBs I got a filesystem error "Freeing blocks not in datazone - block = 18446744071529317386, count = 1" and the backup process stopped. Trying to fix the fs with e2fsck resulted in a completely corrupted fs. The error probably came from ext2_free_blocks(), and because of the large number 18e19 this problem immediately looked like some kind of integer overflow. Whereas the 4TB fs was about 1e9 blocks, the new 12TB is about 3e9 blocks. So, searching the ext2 code, I came across the line in fs/ext2/xattr.c:745 where ext2_new_block() is called and the resulting block number is stored in the variable block as an int datatype. If a block with a block number greater than INT32_MAX is returned, this variable overflows and the call to sb_getblk() at line fs/ext2/xattr.c:750 fails, then the call to ext2_free_blocks() produces the error. Signed-off-by: Georg Ottinger <[email protected]> Signed-off-by: Jan Kara <[email protected]> Message-Id: <[email protected]> Signed-off-by: Sasha Levin <[email protected]> md: raid1: fix potential OOB in raid1_remove_disk() [ Upstream commit 8b0472b50bcf0f19a5119b00a53b63579c8e1e4d ] If rddev->raid_disk is greater than mddev->raid_disks, there will be an out-of-bounds in raid1_remove_disk(). We have already found similar reports as follows: 1) commit d17f744e883b ("md-raid10: fix KASAN warning") 2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk") Fix this bug by checking whether the "number" variable is valid. Signed-off-by: Zhang Shurong <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]> bus: ti-sysc: Configure uart quirks for k3 SoC [ Upstream commit 03a711d3cb83692733f865312f49e665c49de6de ] Enable the uart quirks similar to the earlier SoCs. Let's assume we are likely going to need a k3 specific quirk mask separate from the earlier SoCs, so let's not start changing the revision register mask at this point. Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the need for pm_runtime_irq_safe() from 8250_omap driver. Reviewed-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]> drm/exynos: fix a possible null-pointer dereference due to data race in exynos_drm_crtc_atomic_disable() [ Upstream commit 2e63972a2de14482d0eae1a03a73e379f1c3f44c ] The variable crtc->state->event is often protected by the lock crtc->dev->event_lock when is accessed. However, it is accessed as a condition of an if statement in exynos_drm_crtc_atomic_disable() without holding the lock: if (crtc->state->event && !crtc->state->active) However, if crtc->state->event is changed to NULL by another thread right after the conditions of the if statement is checked to be true, a null-pointer dereference can occur in drm_crtc_send_vblank_event(): e->pipe = pipe; To fix this possible null-pointer dereference caused by data race, the spin lock coverage is extended to protect the if statement as well as the function call to drm_crtc_send_vblank_event(). Reported-by: BassCheck <[email protected]> Link: https://sites.google.com/view/basscheck/home Signed-off-by: Tuo Li <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Added relevant link. Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Sasha Levin <[email protected]> wifi: mac80211_hwsim: drop short frames [ Upstream commit fba360a047d5eeeb9d4b7c3a9b1c8308980ce9a6 ] While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in. Reported-by: [email protected] Reviewed-by: Jeff Johnson <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]> alx: fix OOB-read compiler warning [ Upstream commit 3a198c95c95da10ad844cbeade2fe40bdf14c411 ] The following message shows up when compiling with W=1: In function ‘fortify_memcpy_chk’, inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2: ./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 592 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to get alx stats altogether, alx_get_ethtool_stats() reads beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats, and refactor the unnecessarily complicated BUILD_BUG_ON btw. Signed-off-by: GONG, Ruiqi <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]> mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450 [ Upstream commit 5ae4b0d8875caa44946e579420c7fd5740d58653 ] Errata ERR010450 only shows up if voltage is 1.8V, but if the device is supplied by 3v3 the errata can be ignored. So let's check for if quirk SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency. Cc: Jim Reinhart <[email protected]> Cc: James Autry <[email protected]> Cc: Matthew Maron <[email protected]> Signed-off-by: Giulio Benetti <[email protected]> Acked-by: Haibo Chen <[email protected]> Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Sasha Levin <[email protected]> tpm_tis: Resend command to recover from data transfer errors [ Upstream commit 280db21e153d8810ce3b93640c63ae922bcb9e8e ] Similar to the transmission of TPM responses, also the transmission of TPM commands may become corrupted. Instead of aborting when detecting such issues, try resending the command again. Signed-off-by: Alexander Steffen <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui() [ Upstream commit 9e47a758b70167c9301d2b44d2569f86c7796f2d ] During NVMeTCP Authentication a controller can trigger a kernel oops by specifying the 8192 bit Diffie Hellman group and passing a correctly sized, but zeroed Diffie Hellamn value. mpi_cmp_ui() was detecting this if the second parameter was 0, but 1 is passed from dh_is_pubkey_valid(). This causes the null pointer u->d to be dereferenced towards the end of mpi_cmp_ui() Signed-off-by: Mark O'Donovan <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]> wifi: mwifiex: fix fortify warning [ Upstream commit dcce94b80a954a8968ff29fafcfb066d6197fa9a ] When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3, inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The compiler actually complains on: memmove(pos + ETH_ALEN, &mgmt->u.action.category, sizeof(mgmt->u.action.u.tdls_discover_resp)); and it happens because the fortification logic interprets this as an attempt to overread 1-byte 'u.action.category' member of 'struct ieee80211_mgmt'. To silence this warning, it's enough to pass an address of 'u.action' itself instead of an address of its first member. This also fixes an improper usage of 'sizeof()'. Since 'skb' is extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1' bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'), I assume that the same number of bytes should be copied. Suggested-by: Brian Norris <[email protected]> Signed-off-by: Dmitry Antipov <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> wifi: ath9k: fix printk specifier [ Upstream commit 061115fbfb2ce5870c9a004d68dc63138c07c782 ] Smatch reports: ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer Fix it by modifying %lx to %p in the printk format string. Note that with this change, the pointer address will be printed as a hashed value by default. This is appropriate because the kernel should not leak kernel pointers to user space in an informational message. If someone wants to see the real address for debugging purposes, this can be achieved with the no_hash_pointers kernel option. Signed-off-by: Dongliang Mu <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> devlink: remove reload failed checks in params get/set callbacks [ Upstream commit 633d76ad01ad0321a1ace3e5cc4fed06753d7ac4 ] The checks in question were introduced by: commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload"). That fixed an issue of reload with mlxsw driver. Back then, that was a valid fix, because there was a limitation in place that prevented drivers from registering/unregistering params when devlink instance was registered. It was possible to do the fix differently by changing drivers to register/unregister params in appropriate places making sure the ops operate only on memory which is allocated and initialized. But that, as a dependency, would require to remove the limitation mentioned above. Eventually, this limitation was lifted by: commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance") Also, the alternative fix (which also fixed another issue) was done by: commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code"). Therefore, the checks are no longer relevant. Each driver should make sure to have the params registered only when the memory the ops are working with is allocated and initialized. So remove the checks. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> hw_breakpoint: fix single-stepping when using bpf_overflow_handler [ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ] Arm platforms use is_default_overflow_handler() to determine if the hw_breakpoint code should single-step over the breakpoint trigger or let the custom handler deal with it. Since bpf_overflow_handler() currently isn't recognized as a default handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes it to keep firing (the instruction triggering the data abort exception is never skipped). For example: # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test Attaching 1 probe... hit hit [...] ^C (./test performs a single 4-byte store to 0x10000) This patch replaces the check with uses_default_overflow_handler(), which accounts for the bpf_overflow_handler() case by also testing if one of the perf_event_output functions gets invoked indirectly, via orig_default_handler. Signed-off-by: Tomislav Novak <[email protected]> Tested-by: Samuel Gosselin <[email protected]> # arm64 Reviewed-by: Catalin Marinas <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]> perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09 [ Upstream commit 0242737dc4eb9f6e9a5ea594b3f93efa0b12f28d ] Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU disable control sometimes fail to disable the counters. This will lead to error or inaccurate data since before we enable the counters the counter's still counting for the event used in last perf session. This patch tries to fix this by hardening the global disable process. Before disable the PMU, writing an invalid event type (0xffff) to focibly stop the counters. Correspondingly restore each events on pmu::pmu_enable(). Signed-off-by: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]> ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470 [ Upstream commit 96b709be183c56293933ef45b8b75f8af268c6de ] The Lenovo Ideapad Z470 predates Windows 8, so it defaults to using acpi_video for backlight control. But this is not functional on this model. Add a DMI quirk to use the native backlight interface which works. Link: https://bugzilla.suse.com/show_bug.cgi?id=1208724 Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]> kernel/fork: beware of __put_task_struct() calling context [ Upstream commit d243b34459cea30cfe5f3a9b2feb44e7daff9938 ] Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping locks. Therefore, it can't be called from an non-preemptible context. One practical example is splat inside inactive_task_timer(), which is called in a interrupt context: CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W --------- Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012 Call Trace: dump_stack_lvl+0x57/0x7d mark_lock_irq.cold+0x33/0xba mark_lock+0x1e7/0x400 mark_usage+0x11d/0x140 __lock_acquire+0x30d/0x930 lock_acquire.part.0+0x9c/0x210 rt_spin_lock+0x27/0xe0 refill_obj_stock+0x3d/0x3a0 kmem_cache_free+0x357/0x560 inactive_task_timer+0x1ad/0x340 __run_hrtimer+0x8a/0x1a0 __hrtimer_run_queues+0x91/0x130 hrtimer_interrupt+0x10f/0x220 __sysvec_apic_timer_interrupt+0x7b/0xd0 sysvec_apic_timer_interrupt+0x4f/0xd0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0033:0x7fff196bf6f5 Instead of calling __put_task_struct() directly, we defer it using call_rcu(). A more natural approach would use a workqueue, but since in PREEMPT_RT, we can't allocate dynamic memory from atomic context, the code would become more complex because we would need to put the work_struct instance in the task_struct and initialize it when we allocate a new task_struct. The issue is reproducible with stress-ng: while true; do stress-ng --sched deadline --sched-period 1000000000 \ --sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20 done Reported-by: Hu Chunyu <[email protected]> Suggested-by: Oleg Nesterov <[email protected]> Suggested-by: Valentin Schneider <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Wander Lairson Costa <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer [ Upstream commit 3a21ffdbc825e0919db9da0e27ee5ff2cc8a863e ] ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]' CPU: 37 PID: 1678 Comm: cat Not tainted 6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_bac…
- Loading branch information
