Add support for XT60_SINGA

keyboards/kopibeng/xt60_singa/config.h

@@ -0,0 +1,81 @@
+/* Copyright 2021 Samuel Lu
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4B50 // 'KP' kopibeng  
+#define PRODUCT_ID      0x0601 
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    kopibeng
+#define PRODUCT         XT60_SINGA
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F7, F4, D0, B3, B7 }
+#define MATRIX_COL_PINS { C7, F5, F1, F0, C6, B6, B5, B4, D7, D6, D5, D3, D2, D1 }
+
+#define LED_CAPS_LOCK_PIN D4
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 14
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+    #define RGBLIGHT_EFFECT_BREATHING
+    #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+    #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+    #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+    #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/kopibeng/xt60_singa/info.json

@@ -0,0 +1,81 @@
+{
+    "keyboard_name": "XT60_SINGA",
+    "maintainer": "Kopibeng",
+    "url": "",
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "0,0", "x": 0, "y": 0 },
+                { "label": "0,1", "x": 1, "y": 0 },
+                { "label": "0,2", "x": 2, "y": 0 },
+                { "label": "0,3", "x": 3, "y": 0 },
+                { "label": "0,4", "x": 4, "y": 0 },
+                { "label": "0,5", "x": 5, "y": 0 },
+                { "label": "0,6", "x": 6, "y": 0 },
+                { "label": "0,7", "x": 7, "y": 0 },
+                { "label": "0,8", "x": 8, "y": 0 },
+                { "label": "0,9", "x": 9, "y": 0 },
+                { "label": "0,A", "x": 10, "y": 0 },
+                { "label": "0,B", "x": 11, "y": 0 },
+                { "label": "0,C", "x": 12, "y": 0 },
+                { "label": "0,D", "x": 13, "y": 0 },
+                { "label": "1,D", "x": 14, "y": 0 },
+
+                { "label": "1,0", "w": 1.5, "x": 0, "y": 1 },
+                { "label": "1,1", "x": 1.5, "y": 1 },
+                { "label": "1,2", "x": 2.5, "y": 1 },
+                { "label": "1,3", "x": 3.5, "y": 1 },
+                { "label": "1,4", "x": 4.5, "y": 1 },
+                { "label": "1,5", "x": 5.5, "y": 1 },
+                { "label": "1,6", "x": 6.5, "y": 1 },
+                { "label": "1,7", "x": 7.5, "y": 1 },
+                { "label": "1,8", "x": 8.5, "y": 1 },
+                { "label": "1,9", "x": 9.5, "y": 1 },
+                { "label": "1,A", "x": 10.5, "y": 1 },
+                { "label": "1,B", "x": 11.5, "y": 1 },
+                { "label": "1,C", "x": 12.5, "y": 1 },
+                { "label": "2,C", "w": 1.5, "x": 13.5, "y": 1 },
+
+                { "label": "2,0", "w": 1.75, "x": 0, "y": 2 },
+                { "label": "2,1", "x": 1.75, "y": 2 },
+                { "label": "2,2", "x": 2.75, "y": 2 },
+                { "label": "2,3", "x": 3.75, "y": 2 },
+                { "label": "2,4", "x": 4.75, "y": 2 },
+                { "label": "2,5", "x": 5.75, "y": 2 },
+                { "label": "2,6", "x": 6.75, "y": 2 },
+                { "label": "2,7", "x": 7.75, "y": 2 },
+                { "label": "2,8", "x": 8.75, "y": 2 },
+                { "label": "2,9", "x": 9.75, "y": 2 },
+                { "label": "2,A", "x": 10.75, "y": 2 },
+                { "label": "2,B", "x": 11.75, "y": 2 },
+                { "label": "2,D", "w": 2.25, "x": 12.75, "y": 2 },
+
+                { "label": "3,0", "w": 1.25, "x": 0, "y": 3 },
+                { "label": "3,1", "x": 1.25, "y": 3 },
+                { "label": "3,2", "x": 2.25, "y": 3 },
+                { "label": "3,3", "x": 3.25, "y": 3 },
+                { "label": "3,4", "x": 4.25, "y": 3 },
+                { "label": "3,5", "x": 5.25, "y": 3 },
+                { "label": "3,6", "x": 6.25, "y": 3 },
+                { "label": "3,7", "x": 7.25, "y": 3 },
+                { "label": "3,8", "x": 8.25, "y": 3 },
+                { "label": "3,9", "x": 9.25, "y": 3 },
+                { "label": "3,A", "x": 10.25, "y": 3 },
+                { "label": "3,B", "x": 11.25, "y": 3 },
+                { "label": "3,C", "w": 1.75, "x": 12.25, "y": 3 },
+                { "label": "3,D", "x": 14, "y": 3 },
+
+                { "label": "4,0", "w": 1.25, "x": 0, "y": 4 },
+                { "label": "4,1", "w": 1.25, "x": 1.25, "y": 4 },
+                { "label": "4,2", "w": 1.25, "x": 2.5, "y": 4 },
+                { "label": "4,4", "w": 2.25, "x": 3.75, "y": 4 },
+                { "label": "4,6", "w": 1.25, "x": 6, "y": 4 },
+                { "label": "4,8", "w": 2.75, "x": 7.25, "y": 4 },
+                { "label": "4,A", "w": 1.25, "x": 10, "y": 4 },
+                { "label": "4,B", "w": 1.25, "x": 11.25, "y": 4 },
+                { "label": "4,C", "w": 1.25, "x": 12.5, "y": 4 },
+                { "label": "4,D", "w": 1.25, "x": 13.75, "y": 4 }
+            ]
+        }
+    }
+}

keyboards/kopibeng/xt60_singa/keymaps/default/keymap.c

@@ -0,0 +1,57 @@
+/* Copyright 2021 Samuel Lu
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,         
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(2),  
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,           MO(2),   KC_RALT, MO(1),   KC_RCTL
+	),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+	),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+	),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+	),
+};
+

keyboards/kopibeng/xt60_singa/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+/* Copyright 2021 Samuel Lu
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,         
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(2),  
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,           MO(2),   KC_RALT, MO(1),   KC_RCTL
+	),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+	),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+	),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+	),
+};
+

keyboards/kopibeng/xt60_singa/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/kopibeng/xt60_singa/readme.md

@@ -0,0 +1,21 @@
+# XT60_SINGA
+
+![XT60_SINGA](https://i.imgur.com/n1arBEw.png)
+
+A QMK-powered, VIA-enabled 60% PCB with support for ANSI/ISO layouts, split Backspace, split Right Shift, stepped Caps Lock, 6.25U/7U bottom row, split Spacebar and RGB underglow. 
+
+* Keyboard Maintainer: kopibeng
+* Hardware Supported: A 60% keyboard with ATMEGA32U4
+* Hardware Availability: https://singakbd.com/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kopibeng/xt60_singa:via
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* Physical reset button: Press the RESET switch on top side of PCB.
+* Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard.
+* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available.

keyboards/kopibeng/xt60_singa/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/kopibeng/xt60_singa/xt60_singa.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Samuel Lu
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "xt60_singa.h"