Add Ploopy Madromys mouse

keyboards/ploopyco/madromys/config.h

@@ -0,0 +1,28 @@
+/* Copyright 2023 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <[email protected]>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// #define ROTATIONAL_TRANSFORM_ANGLE 0
+#define POINTING_DEVICE_INVERT_Y
+
+/* PMW3360 Settings */
+#define PMW33XX_CS_PIN GP5
+#define SPI_SCK_PIN GP2
+#define SPI_MISO_PIN GP0
+#define SPI_MOSI_PIN GP7

keyboards/ploopyco/madromys/info.json

@@ -0,0 +1,35 @@
+{
+    "keyboard_name": "Ploopy Madromys Trackball",
+    "url": "www.ploopy.co",
+    "maintainer": "ploopyco",
+    "manufacturer": "Ploopy Corporation",
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "usb": {
+        "vid": "0x5043",
+        "pid": "0x5C46",
+        "max_power": 100
+    },
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "pointing_device": true,
+        "encoder": false
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 1], "label":"Top Left Left", "x":0, "y":0, "h":2},
+                {"matrix": [0, 2], "label":"Top Left", "x":1.25, "y":0, "h":1.25},
+                {"matrix": [0, 3], "label":"Top Right", "x":2.5, "y":0, "h":1.25},
+                {"matrix": [0, 4], "label":"Top Right Right", "x":3.75, "y":0, "h":2},
+                {"matrix": [0, 0], "label":"Bottom Left", "x":0, "y":2.25, "w":1.75, "h":2},
+                {"matrix": [0, 5], "label":"Bottom Right", "x":3, "y":2.25, "w":1.75, "h":2}
+            ]
+        }
+    }
+}

keyboards/ploopyco/madromys/keymaps/default/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2023 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <[email protected]>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 8

keyboards/ploopyco/madromys/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/* Copyright 2023 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <[email protected]>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT( KC_BTN4, KC_BTN5, DRAG_SCROLL, KC_BTN2, KC_BTN1, KC_BTN3 ),
+    [1] = LAYOUT( _______, _______, _______, _______, _______, _______ ),
+    [2] = LAYOUT( _______, _______, _______, _______, _______, _______ ),
+    [3] = LAYOUT( _______, _______, _______, _______, _______, _______ ),
+    [4] = LAYOUT( _______, _______, _______, _______, _______, _______ ),
+    [5] = LAYOUT( _______, _______, _______, _______, _______, _______ ),
+    [6] = LAYOUT( _______, _______, _______, _______, _______, _______ ),
+    [7] = LAYOUT( _______, _______, _______, _______, _______, _______ )
+};

keyboards/ploopyco/madromys/keymaps/default/readme.md

@@ -0,0 +1 @@
+This is the default keymap for Ploopyco Madromys Trackball. VIA is enabled by default, and can be used to customise the key layout. See [the VIA online app](https://usevia.app/) for how to do this.

keyboards/ploopyco/madromys/keymaps/default/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/ploopyco/madromys/madromys.c

@@ -0,0 +1,143 @@
+/* Copyright 2023 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <[email protected]>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "madromys.h"
+
+#ifndef PLOOPY_DPI_OPTIONS
+#    define PLOOPY_DPI_OPTIONS \
+        { 600, 900, 1200, 1600 }
+#    ifndef PLOOPY_DPI_DEFAULT
+#        define PLOOPY_DPI_DEFAULT 1
+#    endif
+#endif
+#ifndef PLOOPY_DPI_DEFAULT
+#    define PLOOPY_DPI_DEFAULT 0
+#endif
+#ifndef PLOOPY_DRAGSCROLL_DPI
+#    define PLOOPY_DRAGSCROLL_DPI 100  // Fixed-DPI Drag Scroll
+#endif
+#ifndef PLOOPY_DRAGSCROLL_FIXED
+#    define PLOOPY_DRAGSCROLL_FIXED 1
+#endif
+#ifndef PLOOPY_DRAGSCROLL_MULTIPLIER
+#    define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75  // Variable-DPI Drag Scroll
+#endif
+
+keyboard_config_t keyboard_config;
+uint16_t          dpi_array[] = PLOOPY_DPI_OPTIONS;
+#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t))
+
+// TODO: Implement libinput profiles
+// https://wayland.freedesktop.org/libinput/doc/latest/pointer-acceleration.html
+// Compile time accel selection
+// Valid options are ACC_NONE, ACC_LINEAR, ACC_CUSTOM, ACC_QUADRATIC
+
+// Trackball State
+bool     is_drag_scroll    = false;
+
+void encoder_init(void) {
+    return;
+}
+bool encoder_read(void) {
+    return false;
+}
+
+report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
+    if (is_drag_scroll) {
+        mouse_report.h = mouse_report.x;
+#ifdef PLOOPY_DRAGSCROLL_INVERT
+        // Invert vertical scroll direction
+        mouse_report.v = -mouse_report.y;
+#else
+        mouse_report.v = mouse_report.y;
+#endif
+        mouse_report.x = 0;
+        mouse_report.y = 0;
+    }
+
+    return pointing_device_task_user(mouse_report);
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+    if (!process_record_user(keycode, record)) {
+        return false;
+    }
+
+    if (keycode == DPI_CONFIG && record->event.pressed) {
+        keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE;
+        eeconfig_update_kb(keyboard_config.raw);
+        pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
+    }
+
+    if (keycode == DRAG_SCROLL) {
+#ifndef PLOOPY_DRAGSCROLL_MOMENTARY
+        if (record->event.pressed)
+#endif
+        {
+            is_drag_scroll ^= 1;
+        }
+#ifdef PLOOPY_DRAGSCROLL_FIXED
+        pointing_device_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]);
+#else
+        pointing_device_set_cpi(is_drag_scroll ? (dpi_array[keyboard_config.dpi_config] * PLOOPY_DRAGSCROLL_MULTIPLIER) : dpi_array[keyboard_config.dpi_config]);
+#endif
+    }
+
+    return true;
+}
+
+// Hardware Setup
+void keyboard_pre_init_kb(void) {
+    // debug_enable  = true;
+    // debug_matrix  = true;
+    // debug_mouse   = true;
+    // debug_encoder = true;
+
+    /* Ground all output pins connected to ground. This provides additional
+     * pathways to ground. If you're messing with this, know this: driving ANY
+     * of these pins high will cause a short. On the MCU. Ka-blooey.
+     */
+#ifdef UNUSABLE_PINS
+    const pin_t unused_pins[] = UNUSABLE_PINS;
+
+    for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
+        setPinOutput(unused_pins[i]);
+        writePinLow(unused_pins[i]);
+    }
+#endif
+
+    keyboard_pre_init_user();
+}
+
+void pointing_device_init_kb(void) { pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); }
+
+void eeconfig_init_kb(void) {
+    keyboard_config.dpi_config = PLOOPY_DPI_DEFAULT;
+    eeconfig_update_kb(keyboard_config.raw);
+    eeconfig_init_user();
+}
+
+void matrix_init_kb(void) {
+    // is safe to just read DPI setting since matrix init
+    // comes before pointing device init.
+    keyboard_config.raw = eeconfig_read_kb();
+    if (keyboard_config.dpi_config > DPI_OPTION_SIZE) {
+        eeconfig_init_kb();
+    }
+    matrix_init_user();
+}

keyboards/ploopyco/madromys/madromys.h

@@ -0,0 +1,40 @@
+/* Copyright 2023 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <[email protected]>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+bool encoder_update_kb(uint8_t index, bool clockwise);
+bool encoder_update_user(uint8_t index, bool clockwise);
+
+typedef union {
+    uint32_t raw;
+    struct {
+        uint8_t dpi_config;
+    };
+} keyboard_config_t;
+_Static_assert(sizeof(keyboard_config_t) == sizeof(uint32_t), "keyboard_config_t size mismatch compared to EEPROM area");
+
+extern keyboard_config_t keyboard_config;
+extern uint16_t          dpi_array[];
+
+enum ploopy_keycodes {
+    DPI_CONFIG = QK_KB_0,
+    DRAG_SCROLL,
+};

keyboards/ploopyco/madromys/post_rules.mk

@@ -0,0 +1,4 @@
+# Force encoder to be disabled
+# But enable the defines for it
+ENCODER_ENABLE := no
+OPT_DEFS += -DENCODER_ENABLE

keyboards/ploopyco/madromys/readme.md

@@ -0,0 +1,42 @@
+
+# Ploopyco Madromys Trackball
+
+It's a DIY, QMK-powered trackball!
+
+* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco)
+* Hardware Supported: RP2040
+* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ploopyco/madromys -km default
+
+# Triggering the Bootloader
+
+Do you see those two golden holes in the board? Those are called **vias**. They act exactly like a switch does. Right now, that switch is OFF. However, if you take a paperclip or a pair of metal tweezers and touch those two vias, the two vias will form an electrical connection. Effectively, that switch turns ON.
+
+Go ahead and connect the two vias, and then (while the vias are connected) plug in the Madromys board into your computer.
+
+The computer should recognise that a mass storage device was just plugged in. Once this is done, you should be able to drag and drop files onto the Madromys board, as if the board was a USB drive. Feel free to remove the tweezers or paperclip at this point.
+
+If you want to upload a new firmware file (a ".uf2" file, like "madromys_awesome_version.uf2" or something), just drag it into the folder, and it'll automatically install on the Madromys board and restart itself, in normal operating mode. You're done!
+
+**TIP**: If your firmware is in some kind of strange state and uploading new firmware isn't fixing it, try uploading [a flash nuke](https://learn.adafruit.com/getting-started-with-raspberry-pi-pico-circuitpython/circuitpython#flash-resetting-uf2-3083182) to the Madromys board before flashing the new firmware. It wipes the memory of the Madromys board completely clean, which can help clear a few types of errors.
+
+# Building Firmware
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+# Drag Scroll
+
+Drag Scroll is a custom keycode for Ploopy devices that allows you to hold or tap a button and have the mouse movement translate into scrolling instead. 
+
+Nothing needs to be enabled to use this functionality; it's enabled on Madromys by default.
+
+### Drag Scroll Configuration
+
+* `#define PLOOPY_DRAGSCROLL_MOMENTARY` - Makes the key into a momentary key, rather than a toggle.
+* `#define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75` - Sets the DPI multiplier to use when drag scroll is enabled. 
+* `#define PLOOPY_DRAGSCROLL_FIXED` - Normally, when activating Drag Scroll, it uses a fraction of the current DPI. You can define this to use a specific, set DPI rather than a fraction of the current DPI. 
+  * `#define PLOOPY_DRAGSCROLL_DPI 100` - When the fixed DPI option is enabled, this sets the DPI to be used for Drag Scroll.
+* `#define PLOOPY_DRAGSCROLL_INVERT` - This reverses the direction that the scroll is performed. 

keyboards/ploopyco/madromys/rev1_001/config.h

@@ -0,0 +1,25 @@
+/* Copyright 2023 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <[email protected]>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// These pins are not broken out, and cannot be used normally.
+// They are set as output and pulled high, by default
+#define UNUSABLE_PINS \
+    { GP1, GP3, GP4, GP6, GP8, GP10, GP14, GP16, GP18, \
+        GP20, GP22, GP24, GP25, GP26, GP27, GP28, GP29 }