Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

usb 1-1.2: input irq status -115 received #77

Closed
hex445 opened this issue Aug 7, 2012 · 3 comments
Closed

usb 1-1.2: input irq status -115 received #77

hex445 opened this issue Aug 7, 2012 · 3 comments

Comments

@hex445
Copy link

hex445 commented Aug 7, 2012

uname -a
Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux

lsusb
Bus 001 Device 004: ID 0471:206c Philips (or NXP) MCE IR Receiver - Spinel plusf0r ASUS

This is remote controller supplied with Asus AT3IonT-I Deluxe

Most of keys does not work and generates these messages:

Aug 7 22:57:56 raspberrypi kernel: [ 3780.184951] usb 1-1.2: input irq status -115 received
Aug 7 22:57:56 raspberrypi kernel: [ 3780.416909] usb 1-1.2: input irq status -115 received
Aug 7 22:57:56 raspberrypi kernel: [ 3780.536908] usb 1-1.2: input irq status -115 received

bmwiedemann pushed a commit to bmwiedemann/raspberrypi-linux that referenced this issue Aug 11, 2012
6e736be "block: make ioc get/put interface more conventional and fix
race on alloction" added WARN_ON_ONCE() in exit_io_context() which
triggers if !PF_EXITING.  All tasks hitting exit_io_context() from
task exit should have PF_EXITING set but task struct tearing down
after fork failure calls into the function without PF_EXITING,
triggering the condition.

  WARNING: at block/blk-ioc.c:234 exit_io_context+0x40/0x92()
  Pid: 17090, comm: trinity Not tainted 3.2.0-rc6-next-20111222-sasha-dirty raspberrypi#77
  Call Trace:
   [<ffffffff810b69a3>] warn_slowpath_common+0x8f/0xb2
   [<ffffffff810b6a77>] warn_slowpath_null+0x18/0x1a
   [<ffffffff8181a7a2>] exit_io_context+0x40/0x92
   [<ffffffff810b58c9>] copy_process+0x126f/0x1453
   [<ffffffff810b5c1b>] do_fork+0x120/0x3e9
   [<ffffffff8106242f>] sys_clone+0x26/0x28
   [<ffffffff82425803>] stub_clone+0x13/0x20
  ---[ end trace a2e4eb670b375238 ]---

Reported-by: Sasha Levin <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
@popcornmix
Copy link
Collaborator

Could you try again with latest kernel and with
dwc_otg.microframe_schedule=1
in cmdline.txt?

@hex445
Copy link
Author

hex445 commented Aug 21, 2012

Kernel 3.2.27+
Yes the messages "input irq status -115 received" has gone. Arrows and "OK" button works in xbmc.
Button "back" does not work but generates "^@" code(maybe this is something with xbmc keymap, I'm not sure). Volume up does not generate any code but works in xbmc. Special buttons does not work.

dwc_otg.microframe_schedule=1 - this option has no influence. The above behaviour is the same with or without it.

@popcornmix
Copy link
Collaborator

Closing as the USB issue seems to be fixed. Please reopen if there is a problem.

popcornmix pushed a commit that referenced this issue Mar 27, 2017
The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.

So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.

root@am335x-evm:~# modprobe -r musb-dsps
[  126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[  126.140465] usb usb2: USB disconnect, device number 1
[  126.146178] usb 2-1: USB disconnect, device number 2
[  126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[  126.423943]
[  126.425525] ======================================================
[  126.431997] [ INFO: possible circular locking dependency detected ]
[  126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted
[  126.444852] -------------------------------------------------------
[  126.451414] modprobe/778 is trying to acquire lock:
[  126.456523]  (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0
[  126.464403]
[  126.464403] but task is already holding lock:
[  126.470511]  (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1
30 [musb_hdrc]
[  126.479965]
[  126.479965] which lock already depends on the new lock.
[  126.479965]
[  126.488531]
[  126.488531] the existing dependency chain (in reverse order) is:
[  126.496368]
[  126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}:
[  126.502968]        otg_timer+0x80/0xec [musb_dsps]
[  126.507990]        call_timer_fn+0xb4/0x390
[  126.512372]        expire_timers+0xf0/0x1fc
[  126.516754]        run_timer_softirq+0x80/0x178
[  126.521511]        __do_softirq+0xc4/0x554
[  126.525802]        irq_exit+0xe8/0x158
[  126.529735]        __handle_domain_irq+0x58/0xb8
[  126.534583]        __irq_usr+0x54/0x80
[  126.538507]
[  126.538507] -> #0 (((&glue->timer))){+.-...}:
[  126.544636]        del_timer_sync+0x40/0xd0
[  126.549066]        musb_remove+0x6c/0x130 [musb_hdrc]
[  126.554370]        platform_drv_remove+0x24/0x3c
[  126.559206]        device_release_driver_internal+0x14c/0x1e0
[  126.565225]        bus_remove_device+0xd8/0x108
[  126.569970]        device_del+0x1e4/0x308
[  126.574170]        platform_device_del+0x24/0x8c
[  126.579006]        platform_device_unregister+0xc/0x20
[  126.584394]        dsps_remove+0x14/0x30 [musb_dsps]
[  126.589595]        platform_drv_remove+0x24/0x3c
[  126.594432]        device_release_driver_internal+0x14c/0x1e0
[  126.600450]        driver_detach+0x38/0x6c
[  126.604740]        bus_remove_driver+0x4c/0xa0
[  126.609407]        SyS_delete_module+0x11c/0x1e4
[  126.614252]        __sys_trace_return+0x0/0x10

Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc: <[email protected]> #4.9+
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ED6E0F17 pushed a commit to ED6E0F17/linux that referenced this issue Mar 31, 2017
commit bc1e215 upstream.

The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.

So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.

root@am335x-evm:~# modprobe -r musb-dsps
[  126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[  126.140465] usb usb2: USB disconnect, device number 1
[  126.146178] usb 2-1: USB disconnect, device number 2
[  126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[  126.423943]
[  126.425525] ======================================================
[  126.431997] [ INFO: possible circular locking dependency detected ]
[  126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty raspberrypi#77 Not tainted
[  126.444852] -------------------------------------------------------
[  126.451414] modprobe/778 is trying to acquire lock:
[  126.456523]  (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0
[  126.464403]
[  126.464403] but task is already holding lock:
[  126.470511]  (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1
30 [musb_hdrc]
[  126.479965]
[  126.479965] which lock already depends on the new lock.
[  126.479965]
[  126.488531]
[  126.488531] the existing dependency chain (in reverse order) is:
[  126.496368]
[  126.496368] -> raspberrypi#1 (&(&musb->lock)->rlock){-.-...}:
[  126.502968]        otg_timer+0x80/0xec [musb_dsps]
[  126.507990]        call_timer_fn+0xb4/0x390
[  126.512372]        expire_timers+0xf0/0x1fc
[  126.516754]        run_timer_softirq+0x80/0x178
[  126.521511]        __do_softirq+0xc4/0x554
[  126.525802]        irq_exit+0xe8/0x158
[  126.529735]        __handle_domain_irq+0x58/0xb8
[  126.534583]        __irq_usr+0x54/0x80
[  126.538507]
[  126.538507] -> #0 (((&glue->timer))){+.-...}:
[  126.544636]        del_timer_sync+0x40/0xd0
[  126.549066]        musb_remove+0x6c/0x130 [musb_hdrc]
[  126.554370]        platform_drv_remove+0x24/0x3c
[  126.559206]        device_release_driver_internal+0x14c/0x1e0
[  126.565225]        bus_remove_device+0xd8/0x108
[  126.569970]        device_del+0x1e4/0x308
[  126.574170]        platform_device_del+0x24/0x8c
[  126.579006]        platform_device_unregister+0xc/0x20
[  126.584394]        dsps_remove+0x14/0x30 [musb_dsps]
[  126.589595]        platform_drv_remove+0x24/0x3c
[  126.594432]        device_release_driver_internal+0x14c/0x1e0
[  126.600450]        driver_detach+0x38/0x6c
[  126.604740]        bus_remove_driver+0x4c/0xa0
[  126.609407]        SyS_delete_module+0x11c/0x1e4
[  126.614252]        __sys_trace_return+0x0/0x10

Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Mar 31, 2017
commit bc1e215 upstream.

The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.

So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.

root@am335x-evm:~# modprobe -r musb-dsps
[  126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[  126.140465] usb usb2: USB disconnect, device number 1
[  126.146178] usb 2-1: USB disconnect, device number 2
[  126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[  126.423943]
[  126.425525] ======================================================
[  126.431997] [ INFO: possible circular locking dependency detected ]
[  126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted
[  126.444852] -------------------------------------------------------
[  126.451414] modprobe/778 is trying to acquire lock:
[  126.456523]  (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0
[  126.464403]
[  126.464403] but task is already holding lock:
[  126.470511]  (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1
30 [musb_hdrc]
[  126.479965]
[  126.479965] which lock already depends on the new lock.
[  126.479965]
[  126.488531]
[  126.488531] the existing dependency chain (in reverse order) is:
[  126.496368]
[  126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}:
[  126.502968]        otg_timer+0x80/0xec [musb_dsps]
[  126.507990]        call_timer_fn+0xb4/0x390
[  126.512372]        expire_timers+0xf0/0x1fc
[  126.516754]        run_timer_softirq+0x80/0x178
[  126.521511]        __do_softirq+0xc4/0x554
[  126.525802]        irq_exit+0xe8/0x158
[  126.529735]        __handle_domain_irq+0x58/0xb8
[  126.534583]        __irq_usr+0x54/0x80
[  126.538507]
[  126.538507] -> #0 (((&glue->timer))){+.-...}:
[  126.544636]        del_timer_sync+0x40/0xd0
[  126.549066]        musb_remove+0x6c/0x130 [musb_hdrc]
[  126.554370]        platform_drv_remove+0x24/0x3c
[  126.559206]        device_release_driver_internal+0x14c/0x1e0
[  126.565225]        bus_remove_device+0xd8/0x108
[  126.569970]        device_del+0x1e4/0x308
[  126.574170]        platform_device_del+0x24/0x8c
[  126.579006]        platform_device_unregister+0xc/0x20
[  126.584394]        dsps_remove+0x14/0x30 [musb_dsps]
[  126.589595]        platform_drv_remove+0x24/0x3c
[  126.594432]        device_release_driver_internal+0x14c/0x1e0
[  126.600450]        driver_detach+0x38/0x6c
[  126.604740]        bus_remove_driver+0x4c/0xa0
[  126.609407]        SyS_delete_module+0x11c/0x1e4
[  126.614252]        __sys_trace_return+0x0/0x10

Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
nathanchance pushed a commit to nathanchance/pi-kernel that referenced this issue Jun 13, 2018
[ Upstream commit eb73190 ]

syzbot was able to trick af_packet again [1]

Various commits tried to address the problem in the past,
but failed to take into account V3 header size.

[1]

tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106

CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ raspberrypi#77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
 prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
 packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
 tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
 xmit_one net/core/dev.c:3049 [inline]
 dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:277 [inline]
 ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the page:
page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2b6867c ("net/packet: fix overflow in check for priv area size")
Fixes: dc80811 ("packet: handle too big packets for PACKET_V3")
Fixes: f6fb8f1 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 13, 2018
[ Upstream commit eb73190 ]

syzbot was able to trick af_packet again [1]

Various commits tried to address the problem in the past,
but failed to take into account V3 header size.

[1]

tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106

CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
 prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
 packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
 tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
 xmit_one net/core/dev.c:3049 [inline]
 dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:277 [inline]
 ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the page:
page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2b6867c ("net/packet: fix overflow in check for priv area size")
Fixes: dc80811 ("packet: handle too big packets for PACKET_V3")
Fixes: f6fb8f1 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 13, 2018
[ Upstream commit eb73190 ]

syzbot was able to trick af_packet again [1]

Various commits tried to address the problem in the past,
but failed to take into account V3 header size.

[1]

tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106

CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
 prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
 packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
 tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
 xmit_one net/core/dev.c:3049 [inline]
 dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:277 [inline]
 ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the page:
page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2b6867c ("net/packet: fix overflow in check for priv area size")
Fixes: dc80811 ("packet: handle too big packets for PACKET_V3")
Fixes: f6fb8f1 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Nov 4, 2018
Upstream commit bffa72c ("net: sk_buff rbnode reorg") got
backported as commit 6b92153 ("net: sk_buff rbnode reorg") into the
v4.14.x-tree.

However, the backport does not include the changes in sch_netem.c

We need these, as otherwise the skb->dev pointer is not set when
dequeueing from the netem rbtree, resulting in a panic:

[   15.427748] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
[   15.428863] IP: netif_skb_features+0x24/0x230
[   15.429402] PGD 0 P4D 0
[   15.429733] Oops: 0000 [#1] SMP PTI
[   15.430169] Modules linked in:
[   15.430614] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.77.mptcp #77
[   15.431497] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   15.432568] task: ffff88042db19680 task.stack: ffffc90000070000
[   15.433356] RIP: 0010:netif_skb_features+0x24/0x230
[   15.433977] RSP: 0018:ffff88043fd83e70 EFLAGS: 00010286
[   15.434665] RAX: ffff880429ad80c0 RBX: ffff88042bd0e400 RCX: ffff880429ad8000
[   15.435585] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88042bd0e400
[   15.436551] RBP: ffff88042bd0e400 R08: ffff88042a4b6c9c R09: 0000000000000001
[   15.437485] R10: 0000000000000004 R11: 0000000000000000 R12: ffff88042c700000
[   15.438393] R13: ffff88042c700000 R14: ffff88042a4b6c00 R15: ffff88042c6bb000
[   15.439315] FS:  0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000
[   15.440314] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.441084] CR2: 00000000000000d0 CR3: 000000042c374000 CR4: 00000000000006e0
[   15.442016] Call Trace:
[   15.442333]  <IRQ>
[   15.442596]  validate_xmit_skb+0x17/0x270
[   15.443134]  validate_xmit_skb_list+0x38/0x60
[   15.443698]  sch_direct_xmit+0x102/0x190
[   15.444198]  __qdisc_run+0xe3/0x240
[   15.444671]  net_tx_action+0x121/0x140
[   15.445177]  __do_softirq+0xe2/0x224
[   15.445654]  irq_exit+0xbf/0xd0
[   15.446072]  smp_apic_timer_interrupt+0x5d/0x90
[   15.446654]  apic_timer_interrupt+0x7d/0x90
[   15.447185]  </IRQ>
[   15.447460] RIP: 0010:native_safe_halt+0x2/0x10
[   15.447992] RSP: 0018:ffffc90000073f10 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10
[   15.449008] RAX: ffffffff816667d0 RBX: ffffffff820946b0 RCX: 0000000000000000
[   15.449895] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   15.450768] RBP: ffffffff82026940 R08: 00000004e858e5e1 R09: ffff88042a4b6d58
[   15.451643] R10: 0000000000000000 R11: 000000d0d56879bb R12: 0000000000000000
[   15.452478] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   15.453340]  ? __sched_text_end+0x2/0x2
[   15.453835]  default_idle+0xf/0x20
[   15.454259]  do_idle+0x170/0x200
[   15.454653]  cpu_startup_entry+0x14/0x20
[   15.455142]  secondary_startup_64+0xa5/0xb0
[   15.455715] Code: 1f 84 00 00 00 00 00 55 53 48 89 fd 48 83 ec 08 8b 87 bc 00 00 00 48 8b 8f c0 00 00 00 0f b6 97 81 00 00 00 48 8b 77 10 48 01 c8 <48> 8b 9
[   15.458138] RIP: netif_skb_features+0x24/0x230 RSP: ffff88043fd83e70
[   15.458933] CR2: 00000000000000d0
[   15.459352] ---[ end trace 083925903ae60570 ]---

Fixes: 6b92153 ("net: sk_buff rbnode reorg")
Cc: Stephen Hemminger <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: Wei Wang <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Christoph Paasch <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Feb 26, 2019
syzbot reported a WARN_ON(!tcp_skb_pcount(skb))
in tcp_send_loss_probe() [1]

This was caused by TCP_REPAIR sent skbs that inadvertenly
were missing a call to tcp_init_tso_segs()

[1]
WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2cb/0x65c kernel/panic.c:214
 __warn.cold+0x20/0x45 kernel/panic.c:571
 report_bug+0x263/0x2b0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 fixup_bug arch/x86/kernel/traps.c:173 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89
RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206
RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb
RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005
RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1
R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040
R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860
 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583
 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
 </IRQ>
RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58
Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc
RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000
 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555
 default_idle_call+0x36/0x90 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x386/0x570 kernel/sched/idle.c:262
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353
 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 7986191 ("tcp: fix TCP_REPAIR xmit queue setup")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Andrey Vagin <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: Neal Cardwell <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
popcornmix pushed a commit that referenced this issue Apr 2, 2019
[ Upstream commit bf50b60 ]

syzbot reported a WARN_ON(!tcp_skb_pcount(skb))
in tcp_send_loss_probe() [1]

This was caused by TCP_REPAIR sent skbs that inadvertenly
were missing a call to tcp_init_tso_segs()

[1]
WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2cb/0x65c kernel/panic.c:214
 __warn.cold+0x20/0x45 kernel/panic.c:571
 report_bug+0x263/0x2b0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 fixup_bug arch/x86/kernel/traps.c:173 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89
RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206
RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb
RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005
RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1
R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040
R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860
 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583
 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
 </IRQ>
RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58
Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc
RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000
 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555
 default_idle_call+0x36/0x90 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x386/0x570 kernel/sched/idle.c:262
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353
 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 7986191 ("tcp: fix TCP_REPAIR xmit queue setup")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Andrey Vagin <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: Neal Cardwell <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Apr 30, 2019
Before calling __ip_options_compile(), we need to ensure the network
header is a an IPv4 one, and that it is already pulled in skb->head.

RAW sockets going through a tunnel can end up calling ipv4_link_failure()
with total garbage in the skb, or arbitrary lengthes.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204

CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:133
 memcpy include/linux/string.h:355 [inline]
 __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
 dst_link_failure include/net/dst.h:427 [inline]
 vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
 vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
 __netdev_start_xmit include/linux/netdevice.h:4414 [inline]
 netdev_start_xmit include/linux/netdevice.h:4423 [inline]
 xmit_one net/core/dev.c:3292 [inline]
 dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
 neigh_output include/net/neighbour.h:508 [inline]
 ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 raw_send_hdrinc net/ipv4/raw.c:432 [inline]
 raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 sock_write_iter+0x27c/0x3e0 net/socket.c:988
 call_write_iter include/linux/fs.h:1866 [inline]
 new_sync_write+0x4c7/0x760 fs/read_write.c:474
 __vfs_write+0xe4/0x110 fs/read_write.c:487
 vfs_write+0x20c/0x580 fs/read_write.c:549
 ksys_write+0x14f/0x2d0 fs/read_write.c:599
 __do_sys_write fs/read_write.c:611 [inline]
 __se_sys_write fs/read_write.c:608 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:608
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29
RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4
R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: ed0de45 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Stephen Suryaputra <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
popcornmix pushed a commit that referenced this issue May 7, 2019
[ Upstream commit 20ff83f ]

Before calling __ip_options_compile(), we need to ensure the network
header is a an IPv4 one, and that it is already pulled in skb->head.

RAW sockets going through a tunnel can end up calling ipv4_link_failure()
with total garbage in the skb, or arbitrary lengthes.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204

CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:133
 memcpy include/linux/string.h:355 [inline]
 __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
 dst_link_failure include/net/dst.h:427 [inline]
 vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
 vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
 __netdev_start_xmit include/linux/netdevice.h:4414 [inline]
 netdev_start_xmit include/linux/netdevice.h:4423 [inline]
 xmit_one net/core/dev.c:3292 [inline]
 dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
 neigh_output include/net/neighbour.h:508 [inline]
 ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 raw_send_hdrinc net/ipv4/raw.c:432 [inline]
 raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 sock_write_iter+0x27c/0x3e0 net/socket.c:988
 call_write_iter include/linux/fs.h:1866 [inline]
 new_sync_write+0x4c7/0x760 fs/read_write.c:474
 __vfs_write+0xe4/0x110 fs/read_write.c:487
 vfs_write+0x20c/0x580 fs/read_write.c:549
 ksys_write+0x14f/0x2d0 fs/read_write.c:599
 __do_sys_write fs/read_write.c:611 [inline]
 __se_sys_write fs/read_write.c:608 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:608
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29
RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4
R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: ed0de45 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Stephen Suryaputra <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue May 7, 2019
[ Upstream commit 20ff83f ]

Before calling __ip_options_compile(), we need to ensure the network
header is a an IPv4 one, and that it is already pulled in skb->head.

RAW sockets going through a tunnel can end up calling ipv4_link_failure()
with total garbage in the skb, or arbitrary lengthes.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204

CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:133
 memcpy include/linux/string.h:355 [inline]
 __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
 dst_link_failure include/net/dst.h:427 [inline]
 vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
 vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
 __netdev_start_xmit include/linux/netdevice.h:4414 [inline]
 netdev_start_xmit include/linux/netdevice.h:4423 [inline]
 xmit_one net/core/dev.c:3292 [inline]
 dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
 neigh_output include/net/neighbour.h:508 [inline]
 ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 raw_send_hdrinc net/ipv4/raw.c:432 [inline]
 raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 sock_write_iter+0x27c/0x3e0 net/socket.c:988
 call_write_iter include/linux/fs.h:1866 [inline]
 new_sync_write+0x4c7/0x760 fs/read_write.c:474
 __vfs_write+0xe4/0x110 fs/read_write.c:487
 vfs_write+0x20c/0x580 fs/read_write.c:549
 ksys_write+0x14f/0x2d0 fs/read_write.c:599
 __do_sys_write fs/read_write.c:611 [inline]
 __se_sys_write fs/read_write.c:608 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:608
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29
RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4
R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: ed0de45 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Stephen Suryaputra <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue May 20, 2020
commit 95cd7dc upstream.

And there are no multiple TRBs on EP0 and WA1 workaround,
so it doesn't need to change TRB for EP0. It fixes below oops.

configfs-gadget gadget: high-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
Unable to handle kernel read from unreadable memory at virtual address 0000000000000008
Mem abort info:
android_work: sent uevent USB_STATE=DISCONNECTED
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits

  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO)
pc : cdns3_gadget_ep_dequeue+0x1d4/0x270
lr : cdns3_gadget_ep_dequeue+0x48/0x270
sp : ffff800012763ba0
x29: ffff800012763ba0 x28: ffff00082c653c00
x27: 0000000000000000 x26: ffff000068fa7b00
x25: ffff0000699b2000 x24: ffff00082c6ac000
x23: ffff000834f0a480 x22: ffff000834e87b9c
x21: 0000000000000000 x20: ffff000834e87800
x19: ffff000069eddc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fbe8 x10: 0000000000000001
x9 : ffff800012101558 x8 : 0000000000000001
x7 : 0000000000000006 x6 : ffff000835d9c668
x5 : ffff000834f0a4c8 x4 : 0000000096000000
x3 : 0000000000001810 x2 : 0000000000000000
x1 : ffff800024bd001c x0 : 0000000000000001
Call trace:
 cdns3_gadget_ep_dequeue+0x1d4/0x270
 usb_ep_dequeue+0x34/0xf8
 composite_dev_cleanup+0x154/0x170
 configfs_composite_unbind+0x6c/0xa8
 usb_gadget_remove_driver+0x44/0x70
 usb_gadget_unregister_driver+0x74/0xe0
 unregister_gadget+0x28/0x58
 gadget_dev_desc_UDC_store+0x80/0x110
 configfs_write_file+0x1e0/0x2a0
 __vfs_write+0x48/0x90
 vfs_write+0xe4/0x1c8
 ksys_write+0x78/0x100
 __arm64_sys_write+0x24/0x30
 el0_svc_common.constprop.0+0x74/0x168
 el0_svc_handler+0x34/0xa0
 el0_svc+0x8/0xc
Code: 52830203 b9407660 f94042e4 11000400 (b9400841)
---[ end trace 1574516e4c1772ca ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..

Fixes: f616c3b ("usb: cdns3: Fix dequeue implementation")
Cc: stable <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue May 20, 2020
commit 95cd7dc upstream.

And there are no multiple TRBs on EP0 and WA1 workaround,
so it doesn't need to change TRB for EP0. It fixes below oops.

configfs-gadget gadget: high-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
Unable to handle kernel read from unreadable memory at virtual address 0000000000000008
Mem abort info:
android_work: sent uevent USB_STATE=DISCONNECTED
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits

  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO)
pc : cdns3_gadget_ep_dequeue+0x1d4/0x270
lr : cdns3_gadget_ep_dequeue+0x48/0x270
sp : ffff800012763ba0
x29: ffff800012763ba0 x28: ffff00082c653c00
x27: 0000000000000000 x26: ffff000068fa7b00
x25: ffff0000699b2000 x24: ffff00082c6ac000
x23: ffff000834f0a480 x22: ffff000834e87b9c
x21: 0000000000000000 x20: ffff000834e87800
x19: ffff000069eddc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fbe8 x10: 0000000000000001
x9 : ffff800012101558 x8 : 0000000000000001
x7 : 0000000000000006 x6 : ffff000835d9c668
x5 : ffff000834f0a4c8 x4 : 0000000096000000
x3 : 0000000000001810 x2 : 0000000000000000
x1 : ffff800024bd001c x0 : 0000000000000001
Call trace:
 cdns3_gadget_ep_dequeue+0x1d4/0x270
 usb_ep_dequeue+0x34/0xf8
 composite_dev_cleanup+0x154/0x170
 configfs_composite_unbind+0x6c/0xa8
 usb_gadget_remove_driver+0x44/0x70
 usb_gadget_unregister_driver+0x74/0xe0
 unregister_gadget+0x28/0x58
 gadget_dev_desc_UDC_store+0x80/0x110
 configfs_write_file+0x1e0/0x2a0
 __vfs_write+0x48/0x90
 vfs_write+0xe4/0x1c8
 ksys_write+0x78/0x100
 __arm64_sys_write+0x24/0x30
 el0_svc_common.constprop.0+0x74/0x168
 el0_svc_handler+0x34/0xa0
 el0_svc+0x8/0xc
Code: 52830203 b9407660 f94042e4 11000400 (b9400841)
---[ end trace 1574516e4c1772ca ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..

Fixes: f616c3b ("usb: cdns3: Fix dequeue implementation")
Cc: stable <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Nov 9, 2020
Richard reported a warning which can be reproduced by running the LTP
madvise6 test (cgroup v1 in the non-hierarchical mode should be used):

  WARNING: CPU: 0 PID: 12 at mm/page_counter.c:57 page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156)
  Modules linked in:
  CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.9.0-rc7-22-default #77
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812d-rebuilt.opensuse.org 04/01/2014
  Workqueue: events drain_local_stock
  RIP: 0010:page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156)
  Call Trace:
    __memcg_kmem_uncharge (mm/memcontrol.c:3022)
    drain_obj_stock (./include/linux/rcupdate.h:689 mm/memcontrol.c:3114)
    drain_local_stock (mm/memcontrol.c:2255)
    process_one_work (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2274)
    worker_thread (./include/linux/list.h:282 kernel/workqueue.c:2416)
    kthread (kernel/kthread.c:292)
    ret_from_fork (arch/x86/entry/entry_64.S:300)

The problem occurs because in the non-hierarchical mode non-root page
counters are not linked to root page counters, so the charge is not
propagated to the root memory cgroup.

After the removal of the original memory cgroup and reparenting of the
object cgroup, the root cgroup might be uncharged by draining a objcg
stock, for example.  It leads to an eventual underflow of the charge and
triggers a warning.

Fix it by linking all page counters to corresponding root page counters
in the non-hierarchical mode.

Please note, that in the non-hierarchical mode all objcgs are always
reparented to the root memory cgroup, even if the hierarchy has more
than 1 level.  This patch doesn't change it.

The patch also doesn't affect how the hierarchical mode is working,
which is the only sane and truly supported mode now.

Thanks to Richard for reporting, debugging and providing an alternative
version of the fix!

Fixes: bf4f059 ("mm: memcg/slab: obj_cgroup API")
Reported-by: <[email protected]>
Signed-off-by: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Reviewed-by: Michal Koutný <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Debugged-by: Richard Palethorpe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
popcornmix pushed a commit that referenced this issue Nov 23, 2020
[ Upstream commit 8de15e9 ]

Richard reported a warning which can be reproduced by running the LTP
madvise6 test (cgroup v1 in the non-hierarchical mode should be used):

  WARNING: CPU: 0 PID: 12 at mm/page_counter.c:57 page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156)
  Modules linked in:
  CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.9.0-rc7-22-default #77
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812d-rebuilt.opensuse.org 04/01/2014
  Workqueue: events drain_local_stock
  RIP: 0010:page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156)
  Call Trace:
    __memcg_kmem_uncharge (mm/memcontrol.c:3022)
    drain_obj_stock (./include/linux/rcupdate.h:689 mm/memcontrol.c:3114)
    drain_local_stock (mm/memcontrol.c:2255)
    process_one_work (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2274)
    worker_thread (./include/linux/list.h:282 kernel/workqueue.c:2416)
    kthread (kernel/kthread.c:292)
    ret_from_fork (arch/x86/entry/entry_64.S:300)

The problem occurs because in the non-hierarchical mode non-root page
counters are not linked to root page counters, so the charge is not
propagated to the root memory cgroup.

After the removal of the original memory cgroup and reparenting of the
object cgroup, the root cgroup might be uncharged by draining a objcg
stock, for example.  It leads to an eventual underflow of the charge and
triggers a warning.

Fix it by linking all page counters to corresponding root page counters
in the non-hierarchical mode.

Please note, that in the non-hierarchical mode all objcgs are always
reparented to the root memory cgroup, even if the hierarchy has more
than 1 level.  This patch doesn't change it.

The patch also doesn't affect how the hierarchical mode is working,
which is the only sane and truly supported mode now.

Thanks to Richard for reporting, debugging and providing an alternative
version of the fix!

Fixes: bf4f059 ("mm: memcg/slab: obj_cgroup API")
Reported-by: <[email protected]>
Signed-off-by: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Reviewed-by: Michal Koutný <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Debugged-by: Richard Palethorpe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 28, 2021
[ Upstream commit 538ea65 ]

In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized.

We should ensure the dpdma controller to be in a consistent and
clean state before further initialization. So add dpdma_hw_init()
to do this.

Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts
instead of error interrupts.

This patch is to fix the kdump kernel crash as below:

[    3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[    3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[    3.704900] Mem abort info:
[    3.704902]   ESR = 0x96000005
[    3.704905]   EC = 0x25: DABT (current EL), IL = 32 bits
[    3.704907]   SET = 0, FnV = 0
[    3.704912]   EA = 0, S1PTW = 0
[    3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[    3.715585] Data abort info:
[    3.715587]   ISV = 0, ISS = 0x00000005
[    3.715589]   CM = 0, WnR = 0
[    3.715592] [000000000000012c] user address but active_mm is swapper
[    3.715596] Internal error: Oops: 96000005 [#1] SMP
[    3.715599] Modules linked in:
[    3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[    3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[    3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[    3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[    3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[    3.798089] sp : ffffffc01186bdf0
[    3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[    3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[    3.811996] x25: 0000000008000408 x24: 0000000000000003
[    3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[    3.822604] x21: 0000000000000000 x20: 0000000008000408
[    3.827908] x19: 0000000000000000 x18: 0000000000000010
[    3.833212] x17: 0000000000000000 x16: 0000000000000000
[    3.838516] x15: 0000000000000000 x14: ffffffc011291740
[    3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[    3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[    3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[    3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[    3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[    3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[    3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[    3.880948] Call trace:
[    3.883382]  xilinx_dpdma_irq_handler+0x418/0x560
[    3.888079]  __handle_irq_event_percpu+0x5c/0x178
[    3.892774]  handle_irq_event_percpu+0x34/0x98
[    3.897210]  handle_irq_event+0x44/0xb8
[    3.901030]  handle_fasteoi_irq+0xd0/0x190
[    3.905117]  generic_handle_irq+0x30/0x48
[    3.909111]  __handle_domain_irq+0x64/0xc0
[    3.913192]  gic_handle_irq+0x78/0xa0
[    3.916846]  el1_irq+0xc4/0x180
[    3.919982]  cpuidle_enter_state+0x134/0x2f8
[    3.924243]  cpuidle_enter+0x38/0x50
[    3.927810]  call_cpuidle+0x1c/0x40
[    3.931290]  do_idle+0x20c/0x270
[    3.934502]  cpu_startup_entry+0x28/0x58
[    3.938410]  rest_init+0xbc/0xcc
[    3.941631]  arch_call_rest_init+0x10/0x1c
[    3.945718]  start_kernel+0x51c/0x558

Fixes: 7cbb0c6 ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Jul 9, 2021
[ Upstream commit 538ea65 ]

In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized.

We should ensure the dpdma controller to be in a consistent and
clean state before further initialization. So add dpdma_hw_init()
to do this.

Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts
instead of error interrupts.

This patch is to fix the kdump kernel crash as below:

[    3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[    3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[    3.704900] Mem abort info:
[    3.704902]   ESR = 0x96000005
[    3.704905]   EC = 0x25: DABT (current EL), IL = 32 bits
[    3.704907]   SET = 0, FnV = 0
[    3.704912]   EA = 0, S1PTW = 0
[    3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[    3.715585] Data abort info:
[    3.715587]   ISV = 0, ISS = 0x00000005
[    3.715589]   CM = 0, WnR = 0
[    3.715592] [000000000000012c] user address but active_mm is swapper
[    3.715596] Internal error: Oops: 96000005 [#1] SMP
[    3.715599] Modules linked in:
[    3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[    3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[    3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[    3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[    3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[    3.798089] sp : ffffffc01186bdf0
[    3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[    3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[    3.811996] x25: 0000000008000408 x24: 0000000000000003
[    3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[    3.822604] x21: 0000000000000000 x20: 0000000008000408
[    3.827908] x19: 0000000000000000 x18: 0000000000000010
[    3.833212] x17: 0000000000000000 x16: 0000000000000000
[    3.838516] x15: 0000000000000000 x14: ffffffc011291740
[    3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[    3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[    3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[    3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[    3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[    3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[    3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[    3.880948] Call trace:
[    3.883382]  xilinx_dpdma_irq_handler+0x418/0x560
[    3.888079]  __handle_irq_event_percpu+0x5c/0x178
[    3.892774]  handle_irq_event_percpu+0x34/0x98
[    3.897210]  handle_irq_event+0x44/0xb8
[    3.901030]  handle_fasteoi_irq+0xd0/0x190
[    3.905117]  generic_handle_irq+0x30/0x48
[    3.909111]  __handle_domain_irq+0x64/0xc0
[    3.913192]  gic_handle_irq+0x78/0xa0
[    3.916846]  el1_irq+0xc4/0x180
[    3.919982]  cpuidle_enter_state+0x134/0x2f8
[    3.924243]  cpuidle_enter+0x38/0x50
[    3.927810]  call_cpuidle+0x1c/0x40
[    3.931290]  do_idle+0x20c/0x270
[    3.934502]  cpu_startup_entry+0x28/0x58
[    3.938410]  rest_init+0xbc/0xcc
[    3.941631]  arch_call_rest_init+0x10/0x1c
[    3.945718]  start_kernel+0x51c/0x558

Fixes: 7cbb0c6 ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Nov 7, 2022
xfstests generic/011 reported use-after-free bug as follows:

  BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
  Read of size 15 at addr ffff8880078933a0 by task dirstress/952

  CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
  Call Trace:
   __dump_stack+0x23/0x29
   dump_stack_lvl+0x51/0x73
   print_address_description+0x67/0x27f
   print_report+0x3e/0x5c
   kasan_report+0x7b/0xa8
   kasan_check_range+0x1b2/0x1c1
   memcpy+0x22/0x5d
   __d_alloc+0x269/0x859
   d_alloc+0x45/0x20c
   d_alloc_parallel+0xb2/0x8b2
   lookup_open+0x3b8/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  Allocated by task 952:
   kasan_save_stack+0x1f/0x42
   kasan_set_track+0x21/0x2a
   kasan_save_alloc_info+0x17/0x1d
   __kasan_kmalloc+0x7e/0x87
   __kmalloc_node_track_caller+0x59/0x155
   kstrndup+0x60/0xe6
   parse_mf_symlink+0x215/0x30b
   check_mf_symlink+0x260/0x36a
   cifs_get_inode_info+0x14e1/0x1690
   cifs_revalidate_dentry_attr+0x70d/0x964
   cifs_revalidate_dentry+0x36/0x62
   cifs_d_revalidate+0x162/0x446
   lookup_open+0x36f/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  Freed by task 950:
   kasan_save_stack+0x1f/0x42
   kasan_set_track+0x21/0x2a
   kasan_save_free_info+0x1c/0x34
   ____kasan_slab_free+0x1c1/0x1d5
   __kasan_slab_free+0xe/0x13
   __kmem_cache_free+0x29a/0x387
   kfree+0xd3/0x10e
   cifs_fattr_to_inode+0xb6a/0xc8c
   cifs_get_inode_info+0x3cb/0x1690
   cifs_revalidate_dentry_attr+0x70d/0x964
   cifs_revalidate_dentry+0x36/0x62
   cifs_d_revalidate+0x162/0x446
   lookup_open+0x36f/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.

Fix this by implementing 'get_link' interface to duplicate the link name.

Fixes: 76894f3 ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <[email protected]>
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
herrnst pushed a commit to herrnst/linux-raspberrypi that referenced this issue Jan 2, 2023
[ Upstream commit ede5a38 ]

When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().

Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.

[   95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[   95.095964] dwmac1000: Master AXI performs any burst length
[   95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[   95.109428] Division by zero in kernel.
[   95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty raspberrypi#77
[   95.123686] Hardware name: Altera SOCFPGA
[   95.127695]  unwind_backtrace from show_stack+0x10/0x14
[   95.132938]  show_stack from dump_stack_lvl+0x40/0x4c
[   95.137992]  dump_stack_lvl from Ldiv0+0x8/0x10
[   95.142527]  Ldiv0 from __aeabi_uidivmod+0x8/0x18
[   95.147232]  __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[   95.152552]  div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[   95.158826]  stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[   95.165533]  stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[   95.171117]  __stmmac_open from stmmac_open+0x30/0x44
[   95.176182]  stmmac_open from __dev_open+0x11c/0x134
[   95.181172]  __dev_open from __dev_change_flags+0x168/0x17c
[   95.186750]  __dev_change_flags from dev_change_flags+0x14/0x50
[   95.192662]  dev_change_flags from devinet_ioctl+0x2b4/0x604
[   95.198321]  devinet_ioctl from inet_ioctl+0x1ec/0x214
[   95.203462]  inet_ioctl from sock_ioctl+0x14c/0x3c4
[   95.208354]  sock_ioctl from vfs_ioctl+0x20/0x38
[   95.212984]  vfs_ioctl from sys_ioctl+0x250/0x844
[   95.217691]  sys_ioctl from ret_fast_syscall+0x0/0x4c
[   95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[   95.227790] 1fa0:                   00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[   95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[   95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74

Signed-off-by: Piergiorgio Beruto <[email protected]>
Fixes: 91a2559 ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
herrnst pushed a commit to herrnst/linux-raspberrypi that referenced this issue Jan 2, 2023
commit 542228d upstream.

xfstests generic/011 reported use-after-free bug as follows:

  BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
  Read of size 15 at addr ffff8880078933a0 by task dirstress/952

  CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ raspberrypi#77
  Call Trace:
   __dump_stack+0x23/0x29
   dump_stack_lvl+0x51/0x73
   print_address_description+0x67/0x27f
   print_report+0x3e/0x5c
   kasan_report+0x7b/0xa8
   kasan_check_range+0x1b2/0x1c1
   memcpy+0x22/0x5d
   __d_alloc+0x269/0x859
   d_alloc+0x45/0x20c
   d_alloc_parallel+0xb2/0x8b2
   lookup_open+0x3b8/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  Allocated by task 952:
   kasan_save_stack+0x1f/0x42
   kasan_set_track+0x21/0x2a
   kasan_save_alloc_info+0x17/0x1d
   __kasan_kmalloc+0x7e/0x87
   __kmalloc_node_track_caller+0x59/0x155
   kstrndup+0x60/0xe6
   parse_mf_symlink+0x215/0x30b
   check_mf_symlink+0x260/0x36a
   cifs_get_inode_info+0x14e1/0x1690
   cifs_revalidate_dentry_attr+0x70d/0x964
   cifs_revalidate_dentry+0x36/0x62
   cifs_d_revalidate+0x162/0x446
   lookup_open+0x36f/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  Freed by task 950:
   kasan_save_stack+0x1f/0x42
   kasan_set_track+0x21/0x2a
   kasan_save_free_info+0x1c/0x34
   ____kasan_slab_free+0x1c1/0x1d5
   __kasan_slab_free+0xe/0x13
   __kmem_cache_free+0x29a/0x387
   kfree+0xd3/0x10e
   cifs_fattr_to_inode+0xb6a/0xc8c
   cifs_get_inode_info+0x3cb/0x1690
   cifs_revalidate_dentry_attr+0x70d/0x964
   cifs_revalidate_dentry+0x36/0x62
   cifs_d_revalidate+0x162/0x446
   lookup_open+0x36f/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.

Fix this by implementing 'get_link' interface to duplicate the link name.

Fixes: 76894f3 ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <[email protected]>
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jan 3, 2023
[ Upstream commit ede5a38 ]

When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().

Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.

[   95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[   95.095964] dwmac1000: Master AXI performs any burst length
[   95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[   95.109428] Division by zero in kernel.
[   95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[   95.123686] Hardware name: Altera SOCFPGA
[   95.127695]  unwind_backtrace from show_stack+0x10/0x14
[   95.132938]  show_stack from dump_stack_lvl+0x40/0x4c
[   95.137992]  dump_stack_lvl from Ldiv0+0x8/0x10
[   95.142527]  Ldiv0 from __aeabi_uidivmod+0x8/0x18
[   95.147232]  __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[   95.152552]  div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[   95.158826]  stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[   95.165533]  stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[   95.171117]  __stmmac_open from stmmac_open+0x30/0x44
[   95.176182]  stmmac_open from __dev_open+0x11c/0x134
[   95.181172]  __dev_open from __dev_change_flags+0x168/0x17c
[   95.186750]  __dev_change_flags from dev_change_flags+0x14/0x50
[   95.192662]  dev_change_flags from devinet_ioctl+0x2b4/0x604
[   95.198321]  devinet_ioctl from inet_ioctl+0x1ec/0x214
[   95.203462]  inet_ioctl from sock_ioctl+0x14c/0x3c4
[   95.208354]  sock_ioctl from vfs_ioctl+0x20/0x38
[   95.212984]  vfs_ioctl from sys_ioctl+0x250/0x844
[   95.217691]  sys_ioctl from ret_fast_syscall+0x0/0x4c
[   95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[   95.227790] 1fa0:                   00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[   95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[   95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74

Signed-off-by: Piergiorgio Beruto <[email protected]>
Fixes: 91a2559 ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Jan 13, 2023
[ Upstream commit ede5a38 ]

When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().

Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.

[   95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[   95.095964] dwmac1000: Master AXI performs any burst length
[   95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[   95.109428] Division by zero in kernel.
[   95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[   95.123686] Hardware name: Altera SOCFPGA
[   95.127695]  unwind_backtrace from show_stack+0x10/0x14
[   95.132938]  show_stack from dump_stack_lvl+0x40/0x4c
[   95.137992]  dump_stack_lvl from Ldiv0+0x8/0x10
[   95.142527]  Ldiv0 from __aeabi_uidivmod+0x8/0x18
[   95.147232]  __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[   95.152552]  div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[   95.158826]  stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[   95.165533]  stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[   95.171117]  __stmmac_open from stmmac_open+0x30/0x44
[   95.176182]  stmmac_open from __dev_open+0x11c/0x134
[   95.181172]  __dev_open from __dev_change_flags+0x168/0x17c
[   95.186750]  __dev_change_flags from dev_change_flags+0x14/0x50
[   95.192662]  dev_change_flags from devinet_ioctl+0x2b4/0x604
[   95.198321]  devinet_ioctl from inet_ioctl+0x1ec/0x214
[   95.203462]  inet_ioctl from sock_ioctl+0x14c/0x3c4
[   95.208354]  sock_ioctl from vfs_ioctl+0x20/0x38
[   95.212984]  vfs_ioctl from sys_ioctl+0x250/0x844
[   95.217691]  sys_ioctl from ret_fast_syscall+0x0/0x4c
[   95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[   95.227790] 1fa0:                   00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[   95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[   95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74

Signed-off-by: Piergiorgio Beruto <[email protected]>
Fixes: 91a2559 ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Dec 11, 2023
…oup()

Erhard reported that the 6.7-rc1 kernel panics on boot if being
built with clang-16. The problem was not reproducible with gcc.

[    5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI
[    5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf]
[    5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 #77
[    5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[    5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[    5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[    5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[    5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[    5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[    5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[    5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[    5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[    5.977860] FS:  00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[    5.977860] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[    5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    5.977860] Call Trace:
[    5.977860]  <TASK>
[    5.977860]  ? __die_body+0x16/0x75
[    5.977860]  ? die_addr+0x4a/0x70
[    5.977860]  ? exc_general_protection+0x1c9/0x2d0
[    5.977860]  ? cgroup_mkdir+0x455/0x9fb
[    5.977860]  ? __x64_sys_mkdir+0x69/0x80
[    5.977860]  ? asm_exc_general_protection+0x26/0x30
[    5.977860]  ? obj_cgroup_charge_pages+0x27/0x2d5
[    5.977860]  obj_cgroup_charge+0x114/0x1ab
[    5.977860]  pcpu_alloc+0x1a6/0xa65
[    5.977860]  ? mem_cgroup_css_alloc+0x1eb/0x1140
[    5.977860]  ? cgroup_apply_control_enable+0x26b/0x7c0
[    5.977860]  mem_cgroup_css_alloc+0x23f/0x1140
[    5.977860]  cgroup_apply_control_enable+0x26b/0x7c0
[    5.977860]  ? cgroup_kn_set_ugid+0x2d/0x1a0
[    5.977860]  cgroup_mkdir+0x455/0x9fb
[    5.977860]  ? __cfi_cgroup_mkdir+0x10/0x10
[    5.977860]  kernfs_iop_mkdir+0x130/0x170
[    5.977860]  vfs_mkdir+0x405/0x530
[    5.977860]  do_mkdirat+0x188/0x1f0
[    5.977860]  __x64_sys_mkdir+0x69/0x80
[    5.977860]  do_syscall_64+0x7d/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  entry_SYSCALL_64_after_hwframe+0x4b/0x53
[    5.977860] RIP: 0033:0x7f297671defb
[    5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88
[    5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
[    5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb
[    5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0
[    5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000
[    5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80
[    5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0
[    5.977860]  </TASK>
[    5.977860] Modules linked in:
[    6.014095] ---[ end trace 0000000000000000 ]---
[    6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[    6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[    6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[    6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[    6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[    6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[    6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[    6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[    6.022609] FS:  00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[    6.023593] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[    6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Actually the problem is caused by uninitialized local variable in
current_obj_cgroup().  If the root memory cgroup is set as an active
memory cgroup for a charging scope (as in the trace, where systemd tries
to create the first non-root cgroup, so the parent cgroup is the root
cgroup), the "for" loop is skipped and uninitialized objcg is returned,
causing a panic down the accounting stack.

The fix is trivial: initialize the objcg variable to NULL unconditionally
before the "for" loop.

[[email protected]: remove redundant assignment]
  Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e86828e ("mm: kmem: scoped objcg protection")
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
Reported-by: Erhard Furtner <[email protected]>
Closes: ClangBuiltLinux/linux#1959
Tested-by:  Erhard Furtner <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
0lxb pushed a commit to 0lxb/rpi_linux that referenced this issue Jan 30, 2024
scx: Fix !CONFIG_SCHED_CLASS_EXT builds
popcornmix pushed a commit that referenced this issue Feb 6, 2024
[ Upstream commit b16904f ]

With latest upstream llvm18, the following test cases failed:

  $ ./test_progs -j
  #13/2    bpf_cookie/multi_kprobe_link_api:FAIL
  #13/3    bpf_cookie/multi_kprobe_attach_api:FAIL
  #13      bpf_cookie:FAIL
  #77      fentry_fexit:FAIL
  #78/1    fentry_test/fentry:FAIL
  #78      fentry_test:FAIL
  #82/1    fexit_test/fexit:FAIL
  #82      fexit_test:FAIL
  #112/1   kprobe_multi_test/skel_api:FAIL
  #112/2   kprobe_multi_test/link_api_addrs:FAIL
  [...]
  #112     kprobe_multi_test:FAIL
  #356/17  test_global_funcs/global_func17:FAIL
  #356     test_global_funcs:FAIL

Further analysis shows llvm upstream patch [1] is responsible for the above
failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c,
without [1], the asm code is:

  0000000000000400 <bpf_fentry_test7>:
     400: f3 0f 1e fa                   endbr64
     404: e8 00 00 00 00                callq   0x409 <bpf_fentry_test7+0x9>
     409: 48 89 f8                      movq    %rdi, %rax
     40c: c3                            retq
     40d: 0f 1f 00                      nopl    (%rax)

... and with [1], the asm code is:

  0000000000005d20 <bpf_fentry_test7.specialized.1>:
    5d20: e8 00 00 00 00                callq   0x5d25 <bpf_fentry_test7.specialized.1+0x5>
    5d25: c3                            retq

... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7>
and this caused test failures for #13/#77 etc. except #356.

For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog
looks like:

  0000000000000000 <global_func17>:
       0:       b4 00 00 00 2a 00 00 00 w0 = 0x2a
       1:       95 00 00 00 00 00 00 00 exit

... which passed verification while the test itself expects a verification
failure.

Let us add 'barrier_var' style asm code in both places to prevent function
specialization which caused selftests failure.

  [1] llvm/llvm-project#72903

Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Feb 6, 2024
[ Upstream commit b16904f ]

With latest upstream llvm18, the following test cases failed:

  $ ./test_progs -j
  #13/2    bpf_cookie/multi_kprobe_link_api:FAIL
  #13/3    bpf_cookie/multi_kprobe_attach_api:FAIL
  #13      bpf_cookie:FAIL
  #77      fentry_fexit:FAIL
  #78/1    fentry_test/fentry:FAIL
  #78      fentry_test:FAIL
  #82/1    fexit_test/fexit:FAIL
  #82      fexit_test:FAIL
  #112/1   kprobe_multi_test/skel_api:FAIL
  #112/2   kprobe_multi_test/link_api_addrs:FAIL
  [...]
  #112     kprobe_multi_test:FAIL
  #356/17  test_global_funcs/global_func17:FAIL
  #356     test_global_funcs:FAIL

Further analysis shows llvm upstream patch [1] is responsible for the above
failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c,
without [1], the asm code is:

  0000000000000400 <bpf_fentry_test7>:
     400: f3 0f 1e fa                   endbr64
     404: e8 00 00 00 00                callq   0x409 <bpf_fentry_test7+0x9>
     409: 48 89 f8                      movq    %rdi, %rax
     40c: c3                            retq
     40d: 0f 1f 00                      nopl    (%rax)

... and with [1], the asm code is:

  0000000000005d20 <bpf_fentry_test7.specialized.1>:
    5d20: e8 00 00 00 00                callq   0x5d25 <bpf_fentry_test7.specialized.1+0x5>
    5d25: c3                            retq

... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7>
and this caused test failures for #13/#77 etc. except #356.

For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog
looks like:

  0000000000000000 <global_func17>:
       0:       b4 00 00 00 2a 00 00 00 w0 = 0x2a
       1:       95 00 00 00 00 00 00 00 exit

... which passed verification while the test itself expects a verification
failure.

Let us add 'barrier_var' style asm code in both places to prevent function
specialization which caused selftests failure.

  [1] llvm/llvm-project#72903

Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants