Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

V4L2 driver updates #1393

Merged
merged 6 commits into from
Apr 8, 2016
Merged

V4L2 driver updates #1393

merged 6 commits into from
Apr 8, 2016

Conversation

6by9
Copy link
Contributor

@6by9 6by9 commented Apr 5, 2016

A few updates to the V4L2 driver for the Pi Camera.

  • Correct the support for ISO control.
  • Add option to specify the /dev/videoN node number.
  • Support for multiple cameras on the CM.
  • Support for specifying where the overlay is on the screen.
  • Compliance test failure.

A quick review by others would be appreciated, just to make sure I haven't missed something silly in the init/exit loops. (I'm afraid I haven't done as much testing of that as I perhaps ought to have done)

@@ -54,6 +54,10 @@ int bcm2835_v4l2_debug;
module_param_named(debug, bcm2835_v4l2_debug, int, 0644);
MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2");

int video_nr = -1;
Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

static?

Copy link
Contributor Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Perhaps same argument should be applied to bcm2835_v4l2_debug above. As you've seen, I've copy/pasted from somewhere else in the next patch and it has become static :-)

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>
6by9 added 5 commits April 6, 2016 23:46
Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>
Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>
Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>
VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>
Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>
@6by9
Copy link
Contributor Author

6by9 commented Apr 6, 2016

@popcornmix I think that addresses the things you raised, and adds an extra patch making the module parameters static variables, except bcm2835_v4l2_debug which is used in multiple files).

@popcornmix popcornmix merged commit 5fe9c7b into raspberrypi:rpi-4.4.y Apr 8, 2016
giraldeau pushed a commit to giraldeau/linux that referenced this pull request Apr 12, 2016
* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>
popcornmix pushed a commit that referenced this pull request Apr 13, 2016
* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>
popcornmix pushed a commit that referenced this pull request May 31, 2016
* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>
popcornmix pushed a commit that referenced this pull request Jun 1, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 1, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 1, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 3, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 6, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 8, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 13, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 21, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 21, 2016
* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>
popcornmix pushed a commit that referenced this pull request Jun 26, 2016
* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>
popcornmix pushed a commit that referenced this pull request Jun 26, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jun 28, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
popcornmix pushed a commit that referenced this pull request Jul 4, 2016
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)
ED6E0F17 pushed a commit to ED6E0F17/linux that referenced this pull request Mar 12, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Mar 12, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Mar 17, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Mar 18, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Mar 23, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Mar 27, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Mar 31, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 2, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 10, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 13, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 18, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 22, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 24, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Apr 27, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request May 5, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request May 9, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request May 15, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request May 21, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request May 24, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Jul 12, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Aug 10, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Aug 13, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
popcornmix pushed a commit that referenced this pull request Oct 29, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes #1318

V4L2 driver updates (#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: #1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
pelwell pushed a commit to pelwell/linux that referenced this pull request Nov 18, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
pelwell pushed a commit to pelwell/linux that referenced this pull request Nov 19, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
pelwell pushed a commit to pelwell/linux that referenced this pull request Nov 19, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
pelwell pushed a commit to pelwell/linux that referenced this pull request Nov 19, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
pelwell pushed a commit to pelwell/linux that referenced this pull request Nov 19, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
pelwell pushed a commit to pelwell/linux that referenced this pull request Nov 19, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
ryncsn pushed a commit to ryncsn/linux-rasp that referenced this pull request Nov 21, 2017
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder

Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Luke Diamand <[email protected]>

V4L2: Fixes from 6by9

V4L2: Fix EV values. Add manual shutter speed control

V4L2 EV values should be in units of 1/1000. Corrected.
Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should
give manual shutter control. Requires manual exposure mode
to be selected first.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct JPEG Q-factor range

Should be 1-100, not 0-100

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue of driver jamming if STREAMON failed.

Fix issue where the driver was left in a partially enabled
state if STREAMON failed, and would then reject many IOCTLs
as it thought it was streaming.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix ISO controls.

Driver was passing the index to the GPU, and not the desired
ISO value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add flicker avoidance controls

Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker
avoidance frequencies.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for frame rate control.

Add support for frame rate (or time per frame as V4L2
inverts it) control via s_parm.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Improve G_FBUF handling so we pass conformance

Return some sane numbers for get framebuffer so that
we pass conformance.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix information advertised through g_vidfmt

Width and height were being stored based on incorrect
values.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for inline H264 headers

Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER
to control H264 inline headers.
Requires firmware fix to work correctly, otherwise format
has to be set to H264 before this parameter is set.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix JPEG timestamp issue

JPEG images were coming through from the GPU with timestamp
of 0. Detect this and give current system time instead
of some invalid value.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix issue when switching down JPEG resolution.

JPEG buffer size calculation is based on input resolution.
Input resolution was being configured after output port
format. Caused failures if switching from one JPEG resolution
to a smaller one.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable MJPEG encoding

Requires GPU firmware update to support MJPEG encoder.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct flag settings for compressed formats

Set flags field correctly on enum_fmt_vid_cap for compressed
image formats.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: H264 profile & level ctrls, FPS control and auto exp pri

Several control handling updates.
H264 profile and level controls.
Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to
select whether AE is allowed to override the framerate specified.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Correct BGR24 to RGB24 in format table

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add additional pixel formats. Correct colourspace

Adds the other flavours of YUYV, and NV12.
Corrects the overlay advertised colourspace.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Drop logging msg from info to debug

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Initial pass at scene modes.

Only supports exposure mode and metering modes.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add manual white balance control.

Adds support for V4L2_CID_RED_BALANCE and
V4L2_CID_BLUE_BALANCE. Only has an effect if
V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has
V4L2_WHITE_BALANCE_MANUAL selected.

Signed-off-by: Dave Stevenson <[email protected]>

config: Enable V4L / MMAL driver

V4L2: Increase the MMAL timeout to 3sec

MJPEG codec flush is now taking longer and results
in a kernel panic if the driver has stopped waiting for
the result when it finally completes.
Increase the timeout value from 1 to 3secs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for setting H264_I_PERIOD

Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD
to set the frequency with which I frames are produced.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Enable GPU function for removing padding from images.

GPU can now support arbitrary strides, although may require
additional processing to achieve it. Enable this feature
so that the images delivered are the size requested.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for V4L2_PIX_FMT_BGR32

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Set the colourspace to avoid odd YUV-RGB conversions

Removes the amiguity from the conversion routines and stops
them dropping back to the SD vs HD choice of coeffs.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Make video/still threshold a run-time param

Move the define for at what resolution the driver
switches from a video mode capture to a stills mode
capture to module parameters.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Fix incorrect pool sizing

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add option to disable enum_framesizes.

Gstreamer's handling of a driver that advertises
V4L2_FRMSIZE_TYPE_STEPWISE to define the supported
resolutions is broken. See bug
https://bugzilla.gnome.org/show_bug.cgi?id=726521

Optional parameter of gst_v4l2src_is_broken added.
If non-zero, the driver claims not to support that
ioctl, and gstreamer should be happy again (it
guesses a set of defaults for itself).

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Add support for more image formats

Adds YVU420 (YV12), YVU420SP (NV21), and BGR888.

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD

Request to extend the range from the fairly arbitrary
1000 frames (33 seconds at 30fps). Extend out to the
max range supported (int32 value).
Also allow 0, which is handled by the codec as only
send an I-frame on the first frame and never again.
There may be an exception if it detects a significant
scene change, but there's no easy way around that.

Signed-off-by: Dave Stevenson <[email protected]>

bcm2835-camera: stop_streaming now has a void return

BCM2835-V4L2: Fix compliance test failures

VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due
to reporting V4L2_COLORSPACE_JPEG when the colour
format wasn't V4L2_PIX_FMT_JPEG.
Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats.

bcm2835 camera planar/packed stride length

Added a field to the mmal_fmt struct used to compute the bytes per line
when using a particular format. This results in the correct stride being
calculated even when the format is planar.

Signed-off-by: Garrett Wilson <[email protected]>

bcm2835: camera: check for scene not being found

static analysis by cppcheck detected some potential NULL pointer
dereference issues:

[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null
  pointer dereference: scene
  (and lines 858, 859 too)

it is possible that scene is not found because of an invalue ctrl->val
and is therefore NULL and hence causing a null pointer dereference.

Signed-off-by: Colin Ian King <[email protected]>

bcm2835: memcpy port data to m rather than rmsg

static analysis by cppcheck detected a memcpy to rmsg which is
not actually initialized at that point.  The memcpy should be copying
to variable m instead.

Signed-off-by: Colin Ian King <[email protected]>

BCM2835-V4L2: Return buffers to videobuf2 on shutdown

raspberrypi#817
Fixes the kernel warning from videobuf2 as buffers
are now returned as they are being flushed on
stop_streaming.

squash: Fixup bcm2835-camera for changes in kernel 4.4 api

v4l2: Fix up driver to upstream timestamp changes

bcm2835-camera: fix a bug in computation of frame timestamp

Fixes raspberrypi#1318

V4L2 driver updates (raspberrypi#1393)

* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO

raspberrypi#1251

V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should.
V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking
V4L2_CID_ISO_SENSITIVITY as 0 for auto mode.
Still accepts 0 for auto, but also abides by the new parameter.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add a video_nr parameter.

Adds a kernel parameter "video_nr" to specify the preferred
/dev/videoX device node.
https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add support for multiple cameras

Ask GPU on load how many cameras have been detected, and
enumerate that number of devices.
Only applicable on the Compute Module as no other device
exposes multiple CSI2 interfaces.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Add control of the overlay location and alpha.

Actually do something useful in vidioc_s_fmt_vid_overlay and
vidioc_try_fmt_vid_overlay, rather than effectively having
read-only fields.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: V4L2-Compliance failure fix

VIDIOC_TRY_FMT was failing due to bytesperline not
being set correctly by default.

Signed-off-by: Dave Stevenson <[email protected]>

* BCM2835-V4L2: Make all module parameters static

Clean up to correct variable scope

Signed-off-by: Dave Stevenson <[email protected]>

V4L2: Request maximum resolution from GPU

Get resolution information about the sensors from the GPU
and advertise it correctly.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-V4L2: Increase minimum resolution to 32x32

raspberrypi#1498 showed
up that 16x16 is failing to work on the GPU for some reason.

GPU bug being tracked on
raspberrypi/firmware#607
Workaround here by increasing minimum resolution via V4L2
to 32x32.

Signed-off-by: Dave Stevenson <[email protected]>

[media]: bcm2835-camera: fix compilation error

There is an error when compiling rpi-4.6.y branch:
  CC [M]  drivers/media/platform/bcm2835/bcm2835-camera.o
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
  .queue_setup = queue_setup,
                 ^
drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup')

The const void *parg in setup_queue callback is not needed since commit:
df9ecb0.
This commit removes it.

Signed-off-by: Slawomir Stepien <[email protected]>

bcm2835-camera: Fix max/min error when looping over cameras/resolutions

See: raspberrypi#1447 (comment)

BCM2835-V4L2: Correct handling for BGR24 vs RGB24.

There was a bug in the GPU firmware that had reversed these
two formats.
Detect the old firmware, and reverse the formats if necessary.

Signed-off-by: Dave Stevenson <[email protected]>

BCM2835-v4l2: Fix a conformance test failure

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	warn: v4l2-test-formats.cpp(1195): S_PARM is supported but
		doesn't report V4L2_CAP_TIMEPERFRAME.
	fail: v4l2-test-formats.cpp(1118): node->has_frmintervals
		&& !cap->capability
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants