Merge pull request #1116 from aap-sc/aap-sc/aug_upstream_sync

Merge up to ac63cd0 from upstream

AUTHORS

@@ -1,12 +1,2 @@
-Dominic Rath <[email protected]>
-Magnus Lundin <[email protected]>
-Michael Fischer <[email protected]>
-Spencer Oliver <[email protected]>
-Carsten Schlote <[email protected]>
-Øyvind Harboe <[email protected]>
-Duane Ellis <[email protected]>
-Michael Schwingen <[email protected]>
-Rick Altherr <[email protected]>
-David Brownell <[email protected]>
-Vincint Palatin <[email protected]>
-Zachary T Welch <[email protected]>
+Please check the source code files and/or Git history for a list of all authors
+and contributors.

Makefile.am

@@ -50,6 +50,8 @@ AM_CPPFLAGS = $(HOST_CPPFLAGS)\
 if INTERNAL_JIMTCL
 AM_CPPFLAGS += -I$(top_srcdir)/jimtcl \
 			   -I$(top_builddir)/jimtcl
+else
+AM_CPPFLAGS += $(JIMTCL_CFLAGS)
 endif
 EXTRA_DIST += \
 	BUGS \

bootstrap

@@ -38,8 +38,8 @@ if [ -n "$SKIP_SUBMODULE" ]; then
     echo "Skipping submodule setup"
 else
     echo "Setting up submodules"
-    git submodule init
-    git submodule update
+    git submodule sync
+    git submodule update --init
 fi
 
 if [ -x src/jtag/drivers/libjaylink/autogen.sh ]; then

configure.ac

@@ -595,6 +595,15 @@ AS_IF([test "x$use_internal_jimtcl" = "xyes"], [
   ], [
     AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
   ])
+], [
+  PKG_CHECK_MODULES([JIMTCL], [jimtcl >= 0.79], [
+      have_jimtcl_pkg_config=yes
+    ], [
+      have_jimtcl_pkg_config=no
+      AC_CHECK_HEADER([jim.h], [], [
+        AC_MSG_ERROR([jimtcl is required but not found via pkg-config and system includes])
+      ])
+  ])
 ])
 
 AS_IF([test "x$build_remote_bitbang" = "xyes"], [
@@ -782,6 +791,7 @@ AM_CONDITIONAL([DMEM], [test "x$build_dmem" = "xyes"])
 AM_CONDITIONAL([HAVE_CAPSTONE], [test "x$enable_capstone" != "xno"])
 
 AM_CONDITIONAL([INTERNAL_JIMTCL], [test "x$use_internal_jimtcl" = "xyes"])
+AM_CONDITIONAL([HAVE_JIMTCL_PKG_CONFIG], [test "x$have_jimtcl_pkg_config" = "xyes"])
 AM_CONDITIONAL([INTERNAL_LIBJAYLINK], [test "x$use_internal_libjaylink" = "xyes"])
 
 # Look for environ alternatives.  Possibility #1: is environ in unistd.h or stdlib.h?

contrib/60-openocd.rules

@@ -29,6 +29,27 @@ ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", MODE="660", GROUP="plugdev",
 # Original FT231XQ VID:PID
 ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE="660", GROUP="plugdev", TAG+="uaccess"
 
+# Original FT2233HP VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6040", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
+# Original FT4233HP VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6041", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
+# Original FT2232HP VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6042", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
+# Original FT4232HP VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6043", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
+# Original FT233HP VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6044", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
+# Original FT232HP VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6045", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
+# Original FT4232HA VID:PID
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6048", MODE="660", GROUP="plugdev", TAG+="uaccess"
+
 # DISTORTEC JTAG-lock-pick Tiny 2
 ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="660", GROUP="plugdev", TAG+="uaccess"
 

doc/Makefile.am

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 info_TEXINFOS += %D%/openocd.texi
 %C%_openocd_TEXINFOS = %D%/fdl.texi
 

doc/openocd.1

@@ -1,24 +1,21 @@
-.TH "OPENOCD" "1" "November 24, 2009"
+.TH "OPENOCD" "1" "June 18, 2024"
 .SH "NAME"
 openocd \- A free and open on\-chip debugging, in\-system programming and
-boundary\-scan testing tool for ARM and MIPS systems
+boundary\-scan testing tool for microcontrollers and other embedded devices
 .SH "SYNOPSIS"
-.B openocd \fR[\fB\-fsdlcphv\fR] [\fB\-\-file\fR <filename>] [\fB\-\-search\fR <dirname>] [\fB\-\-debug\fR <debuglevel>] [\fB\-\-log_output\fR <filename>] [\fB\-\-command\fR <cmd>] [\fB\-\-pipe\fR] [\fB\-\-help\fR] [\fB\-\-version\fR]
+.B openocd \fR[\fB\-fsdlchv\fR] [\fB\-\-file\fR <filename>] [\fB\-\-search\fR <dirname>] [\fB\-\-debug\fR <debuglevel>] [\fB\-\-log_output\fR <filename>] [\fB\-\-command\fR <cmd>] [\fB\-\-help\fR] [\fB\-\-version\fR]
 .SH "DESCRIPTION"
 .B OpenOCD
 is an on\-chip debugging, in\-system programming and boundary\-scan
-testing tool for various ARM and MIPS systems.
+testing tool for various microcontrollers and other embedded devices.
 .PP
-The debugger uses an IEEE 1149\-1 compliant JTAG TAP bus master to access
-on\-chip debug functionality available on ARM based microcontrollers or
-system-on-chip solutions. For MIPS systems the EJTAG interface is supported.
+Various different types of debug adapters as well as transport protocols like
+JTAG and SWD are supported by OpenOCD, please check the \fIopenocd\fR info page
+for the complete list.
 .PP
 User interaction is realized through a telnet command line interface,
 a gdb (the GNU debugger) remote protocol server, and a simplified RPC
 connection that can be used to interface with OpenOCD's Jim Tcl engine.
-.PP
-OpenOCD supports various different types of JTAG interfaces/programmers,
-please check the \fIopenocd\fR info page for the complete list.
 .SH "OPTIONS"
 .TP
 .B "\-f, \-\-file <filename>"
@@ -68,8 +65,6 @@ Note that you will need to explicitly invoke
 .I init
 if the command requires access to a target or flash.
 .TP
-.B "\-p, \-\-pipe"
-Use pipes when talking to gdb.
 .TP
 .B "\-h, \-\-help"
 Show a help text and exit.
@@ -82,8 +77,6 @@ Please report any bugs on the mailing list at
 .SH "LICENCE"
 .B OpenOCD
 is covered by the GNU General Public License (GPL), version 2 or later.
-.SH "SEE ALSO"
-.BR jtag (1)
 .PP
 The full documentation for
 .B openocd