Compliance command failure

[T0288827]

I am trying to run compliance test for the Pico core using my UVM ENV but facing issue while running compliance command
with reference to attached file.
Compliance Testing Failure using the below command as follow.docx

Please let me know if any switch is missed to add in my compliance command.

[MarcKarasek]

Clone this repo: https://github.com/InspireSemi/riscof_install_example_DUT This repo is setup for using ACT to test a DUT vs Sail. It has scripts to install Sail and other dependencies needed by Sail/Riscof There is a example_dut/ dir that has sample python scripts, plus DUT environment headers. You can use this as a template for your DUT. You cannot just clone riscv-arch-test and run from there. You need some infrastructure around it that this repo provides. If you have any questions about this repo email me and I can help you. Marc

…

On Wed, Apr 10, 2024 at 7:23 AM T0288827 ***@***.***> wrote: I am trying to run compliance test for the Pico core using my UVM ENV but facing issue while running compliance command with reference to attached file. Compliance Testing Failure using the below command as follow.docx <https://github.com/riscv-non-isa/riscv-arch-test/files/14931382/Compliance.Testing.Failure.using.the.below.command.as.follow.docx> Please let me know if any switch is missed to add in my compliance command. — Reply to this email directly, view it on GitHub <#452>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AD72ZMZARMK2Q7AP67L6IZDY4UOL3AVCNFSM6AAAAABGAH5NGOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIZTKMZWGA4TGNQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

-- /**************** Marc Karasek ASM T648 Herder of Cats ****************/

[allenjbaum]

Did you try this fix?
IF yes, did this fix your problem?
IF yes, please close this issue
IF no, please describe what errors you get when following Marc's advice
If no description is following, I'd advise the maintainer is to close this proactively in a couple of weeks.

[T0288827]

Thanks for the reply,but for my project Riscof is not the usage. Can you let me know is there any infrastructure to handle the test.S
Because I could see CVA6 and few more IPs are running without Riscof platform.

[allenjbaum]

Sorry, but the arch-test sigs use the arch-test framework, which is riscof.
IF you don't use riscof, these tests won't help at all (since they are not self checking, and require running Sail and comparing the results)

There are also a set of spike tests that might be more appropriate for your use case:
https://github.com/riscv-software-src/riscv-tests
Caveat: they only support the configurations that Spike supports, and they don't have a lot of coverage.