This is a derivative of RichRap's 3DR Delta printer, redesigned from scratch by JohnSL. You can find Rich's original files here: https://github.com/RichRap/3DR-Delta-Printer
This particular fork adds some functionality I wanted to JohnSL's (already brilliant) models. I am moving the power socket and controller panel to the base of the printer, adding a power switch, adding a mounting option for the RUMBA board, and eventually adding tool-changing mounts to the frame.
Please be aware and abide by the license that all of these files are covered by - Attribution - ShareAlike Creative Commons V3 (CC BY-SA 3.0) - http://creativecommons.org/licenses/by-sa/3.0/. Do not forget to attribute John's work (and my small contributions), as well as acknowledging the work by others that this is built on.
-[x] Add a slot/bracket to one of the bottom sections for a base-mounted power socket (4-pin Power DIN).
-[x] Add a hole for mounting a power switch to the base.
-[x] Add holes/brackets for a base-mounted screen/controller.
-[x] Add holes, spacing, and restraint holes for the extra wiring routed through the base.
-[x] Re-jig the electronics mounting to fit the RUMBA board and perhaps some extra fans/boards.
-[ ] Add hole for a USB socket on the base frame (RUMBA usb plug is rather fragile).
-[ ] Eventually add mounts for tool-swapping.
I am a member of UBC Rapid, an engineering design team from the University of British Columbia. Our team's blog and contact info may be found at http://ubc-rapid.com/blog/. Some of my other designs may be found at http://www.thingiverse.com/Aruut/designs.