Rev C test log

[rusefillc]

ETB works

[rusefillc]

@ElDominio have you received any rev C? Do they crank/start real vehicle? Looking to confirm if adjusted crank/cam conditioner is happy.

[rusefillc]

@ElDominio says "i put on forte, forte turned on without problem. but let me recheck just in case"

[ElDominio]

DanielRiveraGenesisrevC.zip

No RPM :(
Will upload to rusefi online just in case

https://rusefi.com/online/view.php?log=1052

[rusefillc]

Diode goes off first

https://rusefi.com/docs/ibom/hellen154hyundai-c-ibom.html

[ElDominio]

No RPM reading

[Qwerty-OFF]

Looks like we've lost crank pull-up somehow :(

Try adding external 4.7K ish resistor

[ElDominio]

Did the mod, still no RPM anywhere, TS, console or LED.

[ElDominio]

[ElDominio]

the two on cam were disconnected for the test

i only had 2k resistors to install no 4.7; i normally use 1k pullup so i fugred 2k was closer to 4.7 lol

leds stay off all the time

[rusefillc]

[rusefillc]

@ElDominio looks like part of the issue was software not adjusted to rev C changes

With original "remove six parts" #63 (comment)

but without "add resistors" I have Hall sensor working on the bench, worth trying on real vehicle with latest firmware.

[ElDominio]

Updated to latest, still not reading

Fan is now on?
Console reads nothing either

[rusefillc]

All I need is a photo of the board in current state and a log of cranking attempt to confirm if we got any counter activity or not.

[ElDominio]

Will do tomorrow

[ElDominio]

crankingrevc.zip

[rusefillc]

@ElDominio can you hack a pull-up to 5v externally or internally?

to begin with I suggest we just focus on Crank

@Qwerty-OFF was a bit wrong at

in reality 5v is on top side of the other resistor array, the one closer to LEDs. left-bottom corner

another option is waiting for me to land in PR

[rusefillc]

actually please remove the wrong resistor lead from

note how it's connecting things which were not supposed to be connected

[ElDominio]

STill no RPM