Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

shortest_match does not match *shortest* #747

Closed
mina86 opened this issue Feb 26, 2021 · 1 comment
Closed

shortest_match does not match *shortest* #747

mina86 opened this issue Feb 26, 2021 · 1 comment
Labels
doc fix-incoming

Comments

@mina86
Copy link

mina86 commented Feb 26, 2021

What version of regex are you using?

1.4.3

Describe the bug at a high level.

The name shortest_match is misleading. It suggests the method will return shortest possible match. In reality that’s not the case. While I accept that it may be infeasible to change the code to make such guarantee, the name of the method should be changed. fastest_match? match_end?

What are the steps to reproduce the behavior?

extern crate regex;

use regex::Regex;

fn main() {
    println!("{}", Regex::new("ab|a").unwrap().shortest_match("ab").unwrap());
}

What is the actual behavior?

Prints 2.

What is the expected behavior?

Prints 1.
@BurntSushi
Copy link
Member

Indeed. A better name I think is leftmost_first, but it is a bit more arcane I think.

With that said, I am not sure that the current behavior is correct either. It requires an investigation. I would naively assume that your program prints 1.

@BurntSushi BurntSushi mentioned this issue Jul 2, 2021
Closed
BurntSushi added a commit that referenced this issue Mar 6, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
6597802 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
553271c 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
fc8901d 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
e8423b3 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
9cc85cd 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
deb1162 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 20, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
6dbcbc5 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Mar 21, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
ff245da 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
9885cc4 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 15, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
ad2eb93 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 17, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
d8d7474 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 17, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
a89d485 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 17, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
e059c41 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 17, 2023
@BurntSushi
doc: tweak docs for 'shortest_match'
be2afa1 
The name is somewhat unfortunate, but it's actually kind of difficult to
capture the right semantics in the name. The key bit is that the
function returns the offset at the point at which a match is known, and
that point might vary depending on which internal regex engine was used.

Fixes #747
BurntSushi added a commit that referenced this issue Apr 20, 2023
@BurntSushi
release: 1.8.0
1b72261 
1.8.0 (2023-04-20)
==================
This is a sizeable release that will be soon followed by another sizeable
release. Both of them will combined close over 40 existing issues and PRs.

This first release, despite its size, essentially represent preparatory work
for the second release, which will be even bigger. Namely, this release:

* Increases the MSRV to Rust 1.60.0, which was released about 1 year ago.
* Upgrades its dependency on `aho-corasick` to the recently release 1.0
version.
* Upgrades its dependency on `regex-syntax` to the simultaneously released
`0.7` version. The changes to `regex-syntax` principally revolve around a
rewrite of its literal extraction code and a number of simplifications and
optimizations to its high-level intermediate representation (HIR).

The second release, which will follow ~shortly after the release above, will
contain a soup-to-nuts rewrite of every regex engine. This will be done by
bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into
this repository, and then changing the `regex` crate to be nothing but an API
shim layer on top of `regex-automata`'s API.

These tandem releases are the culmination of about 3
years of on-and-off work that [began in earnest in March
2020](#656).

Because of the scale of changes involved in these releases, I would love to
hear about your experience. Especially if you notice undocumented changes in
behavior or performance changes (positive *or* negative).

Most changes in the first release are listed below. For more details, please
see the commit log, which reflects a linear and decently documented history
of all changes.

New features:

* [FEATURE #501](#501):
Permit many more characters to be escaped, even if they have no significance.
More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be
escaped. Also, a new routine, `is_escapeable_character`, has been added to
`regex-syntax` to query whether a character is escapeable or not.
* [FEATURE #547](#547):
Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise
introduce any new expressive power.
* [FEATURE #595](#595):
Capture group names are now Unicode-aware. They can now begin with either a `_`
or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints
can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and
`]`. Note that replacement syntax has not changed.
* [FEATURE #810](#810):
Add `Match::is_empty` and `Match::len` APIs.
* [FEATURE #905](#905):
Add an `impl Default for RegexSet`, with the default being the empty set.
* [FEATURE #908](#908):
A new method, `Regex::static_captures_len`, has been added which returns the
number of capture groups in the pattern if and only if every possible match
always contains the same number of matching groups.
* [FEATURE #955](#955):
Named captures can now be written as `(?<name>re)` in addition to
`(?P<name>re)`.
* FEATURE: `regex-syntax` now supports empty character classes.
* FEATURE: `regex-syntax` now has an optional `std` feature. (This will come
to `regex` in the second release.)
* FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications
made to it.
* FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF
mode. This will be supported in `regex` proper in the second release.
* FEATURE: `regex-syntax` now has proper support for "regex that never
matches" via `Hir::fail()`.
* FEATURE: The `hir::literal` module of `regex-syntax` has been completely
re-worked. It now has more documentation, examples and advice.
* FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed
to `utf8`, and the meaning of the boolean has been flipped.

Performance improvements:

* PERF: The upgrade to `aho-corasick 1.0` may improve performance in some
cases. It's difficult to characterize exactly which patterns this might impact,
but if there are a small number of longish (>= 4 bytes) prefix literals, then
it might be faster than before.

Bug fixes:

* [BUG #514](#514):
Improve `Debug` impl for `Match` so that it doesn't show the entire haystack.
* BUGS [#516](#516),
[#731](#731):
Fix a number of issues with printing `Hir` values as regex patterns.
* [BUG #610](#610):
Add explicit example of `foo|bar` in the regex syntax docs.
* [BUG #625](#625):
Clarify that `SetMatches::len` does not (regretably) refer to the number of
matches in the set.
* [BUG #660](#660):
Clarify "verbose mode" in regex syntax documentation.
* BUG [#738](#738),
[#950](#950):
Fix `CaptureLocations::get` so that it never panics.
* [BUG #747](#747):
Clarify documentation for `Regex::shortest_match`.
* [BUG #835](#835):
Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`.
* [BUG #846](#846):
Add more clarifying documentation to the `CompiledTooBig` error variant.
* [BUG #854](#854):
Clarify that `regex::Regex` searches as if the haystack is a sequence of
Unicode scalar values.
* [BUG #884](#884):
Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute.
* [BUG #893](#893):
Optimize case folding since it can get quite slow in some pathological cases.
* [BUG #895](#895):
Reject `(?-u:\W)` in `regex::Regex` APIs.
* [BUG #942](#942):
Add a missing `void` keyword to indicate "no parameters" in C API.
* [BUG #965](#965):
Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`.
* [BUG #975](#975):
Clarify documentation for `\pX` syntax.
@BurntSushi BurntSushi mentioned this issue Apr 20, 2023
Merged
BurntSushi added a commit that referenced this issue Apr 20, 2023
@BurntSushi
release: 1.8.0
070374f 
1.8.0 (2023-04-20)
==================
This is a sizeable release that will be soon followed by another sizeable
release. Both of them will combined close over 40 existing issues and PRs.

This first release, despite its size, essentially represent preparatory work
for the second release, which will be even bigger. Namely, this release:

* Increases the MSRV to Rust 1.60.0, which was released about 1 year ago.
* Upgrades its dependency on `aho-corasick` to the recently release 1.0
version.
* Upgrades its dependency on `regex-syntax` to the simultaneously released
`0.7` version. The changes to `regex-syntax` principally revolve around a
rewrite of its literal extraction code and a number of simplifications and
optimizations to its high-level intermediate representation (HIR).

The second release, which will follow ~shortly after the release above, will
contain a soup-to-nuts rewrite of every regex engine. This will be done by
bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into
this repository, and then changing the `regex` crate to be nothing but an API
shim layer on top of `regex-automata`'s API.

These tandem releases are the culmination of about 3
years of on-and-off work that [began in earnest in March
2020](#656).

Because of the scale of changes involved in these releases, I would love to
hear about your experience. Especially if you notice undocumented changes in
behavior or performance changes (positive *or* negative).

Most changes in the first release are listed below. For more details, please
see the commit log, which reflects a linear and decently documented history
of all changes.

New features:

* [FEATURE #501](#501):
Permit many more characters to be escaped, even if they have no significance.
More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be
escaped. Also, a new routine, `is_escapeable_character`, has been added to
`regex-syntax` to query whether a character is escapeable or not.
* [FEATURE #547](#547):
Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise
introduce any new expressive power.
* [FEATURE #595](#595):
Capture group names are now Unicode-aware. They can now begin with either a `_`
or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints
can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and
`]`. Note that replacement syntax has not changed.
* [FEATURE #810](#810):
Add `Match::is_empty` and `Match::len` APIs.
* [FEATURE #905](#905):
Add an `impl Default for RegexSet`, with the default being the empty set.
* [FEATURE #908](#908):
A new method, `Regex::static_captures_len`, has been added which returns the
number of capture groups in the pattern if and only if every possible match
always contains the same number of matching groups.
* [FEATURE #955](#955):
Named captures can now be written as `(?<name>re)` in addition to
`(?P<name>re)`.
* FEATURE: `regex-syntax` now supports empty character classes.
* FEATURE: `regex-syntax` now has an optional `std` feature. (This will come
to `regex` in the second release.)
* FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications
made to it.
* FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF
mode. This will be supported in `regex` proper in the second release.
* FEATURE: `regex-syntax` now has proper support for "regex that never
matches" via `Hir::fail()`.
* FEATURE: The `hir::literal` module of `regex-syntax` has been completely
re-worked. It now has more documentation, examples and advice.
* FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed
to `utf8`, and the meaning of the boolean has been flipped.

Performance improvements:

* PERF: The upgrade to `aho-corasick 1.0` may improve performance in some
cases. It's difficult to characterize exactly which patterns this might impact,
but if there are a small number of longish (>= 4 bytes) prefix literals, then
it might be faster than before.

Bug fixes:

* [BUG #514](#514):
Improve `Debug` impl for `Match` so that it doesn't show the entire haystack.
* BUGS [#516](#516),
[#731](#731):
Fix a number of issues with printing `Hir` values as regex patterns.
* [BUG #610](#610):
Add explicit example of `foo|bar` in the regex syntax docs.
* [BUG #625](#625):
Clarify that `SetMatches::len` does not (regretably) refer to the number of
matches in the set.
* [BUG #660](#660):
Clarify "verbose mode" in regex syntax documentation.
* BUG [#738](#738),
[#950](#950):
Fix `CaptureLocations::get` so that it never panics.
* [BUG #747](#747):
Clarify documentation for `Regex::shortest_match`.
* [BUG #835](#835):
Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`.
* [BUG #846](#846):
Add more clarifying documentation to the `CompiledTooBig` error variant.
* [BUG #854](#854):
Clarify that `regex::Regex` searches as if the haystack is a sequence of
Unicode scalar values.
* [BUG #884](#884):
Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute.
* [BUG #893](#893):
Optimize case folding since it can get quite slow in some pathological cases.
* [BUG #895](#895):
Reject `(?-u:\W)` in `regex::Regex` APIs.
* [BUG #942](#942):
Add a missing `void` keyword to indicate "no parameters" in C API.
* [BUG #965](#965):
Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`.
* [BUG #975](#975):
Clarify documentation for `\pX` syntax.
crapStone added a commit to Calciumdibromid/CaBr2 that referenced this issue May 2, 2023
@crapStone
Update Rust crate regex to 1.8.1 (#1874)
2bc09ca 
This PR contains the following updates:

| Package | Type | Update | Change |
|---|---|---|---|
| [regex](https://github.com/rust-lang/regex) | dependencies | minor | `1.7.3` -> `1.8.1` |

---

### Release Notes

<details>
<summary>rust-lang/regex</summary>

### [`v1.8.1`](https://github.com/rust-lang/regex/blob/HEAD/CHANGELOG.md#&#8203;181-2023-04-21)

\==================
This is a patch release that fixes a bug where a regex match could be reported
where none was found. Specifically, the bug occurs when a pattern contains some
literal prefixes that could be extracted *and* an optional word boundary in the
prefix.

Bug fixes:

-   [BUG #&#8203;981](rust-lang/regex#981):
    Fix a bug where a word boundary could interact with prefix literal
    optimizations and lead to a false positive match.

### [`v1.8.0`](https://github.com/rust-lang/regex/blob/HEAD/CHANGELOG.md#&#8203;180-2023-04-20)

\==================
This is a sizeable release that will be soon followed by another sizeable
release. Both of them will combined close over 40 existing issues and PRs.

This first release, despite its size, essentially represents preparatory work
for the second release, which will be even bigger. Namely, this release:

-   Increases the MSRV to Rust 1.60.0, which was released about 1 year ago.
-   Upgrades its dependency on `aho-corasick` to the recently released 1.0
    version.
-   Upgrades its dependency on `regex-syntax` to the simultaneously released
    `0.7` version. The changes to `regex-syntax` principally revolve around a
    rewrite of its literal extraction code and a number of simplifications and
    optimizations to its high-level intermediate representation (HIR).

The second release, which will follow ~shortly after the release above, will
contain a soup-to-nuts rewrite of every regex engine. This will be done by
bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into
this repository, and then changing the `regex` crate to be nothing but an API
shim layer on top of `regex-automata`'s API.

These tandem releases are the culmination of about 3
years of on-and-off work that [began in earnest in March
2020](rust-lang/regex#656).

Because of the scale of changes involved in these releases, I would love to
hear about your experience. Especially if you notice undocumented changes in
behavior or performance changes (positive *or* negative).

Most changes in the first release are listed below. For more details, please
see the commit log, which reflects a linear and decently documented history
of all changes.

New features:

-   [FEATURE #&#8203;501](rust-lang/regex#501):
    Permit many more characters to be escaped, even if they have no significance.
    More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be
    escaped. Also, a new routine, `is_escapeable_character`, has been added to
    `regex-syntax` to query whether a character is escapeable or not.
-   [FEATURE #&#8203;547](rust-lang/regex#547):
    Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise
    introduce any new expressive power.
-   [FEATURE #&#8203;595](rust-lang/regex#595):
    Capture group names are now Unicode-aware. They can now begin with either a `_`
    or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints
    can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and
    `]`. Note that replacement syntax has not changed.
-   [FEATURE #&#8203;810](rust-lang/regex#810):
    Add `Match::is_empty` and `Match::len` APIs.
-   [FEATURE #&#8203;905](rust-lang/regex#905):
    Add an `impl Default for RegexSet`, with the default being the empty set.
-   [FEATURE #&#8203;908](rust-lang/regex#908):
    A new method, `Regex::static_captures_len`, has been added which returns the
    number of capture groups in the pattern if and only if every possible match
    always contains the same number of matching groups.
-   [FEATURE #&#8203;955](rust-lang/regex#955):
    Named captures can now be written as `(?<name>re)` in addition to
    `(?P<name>re)`.
-   FEATURE: `regex-syntax` now supports empty character classes.
-   FEATURE: `regex-syntax` now has an optional `std` feature. (This will come
    to `regex` in the second release.)
-   FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications
    made to it.
-   FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF
    mode. This will be supported in `regex` proper in the second release.
-   FEATURE: `regex-syntax` now has proper support for "regex that never
    matches" via `Hir::fail()`.
-   FEATURE: The `hir::literal` module of `regex-syntax` has been completely
    re-worked. It now has more documentation, examples and advice.
-   FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed
    to `utf8`, and the meaning of the boolean has been flipped.

Performance improvements:

-   PERF: The upgrade to `aho-corasick 1.0` may improve performance in some
    cases. It's difficult to characterize exactly which patterns this might impact,
    but if there are a small number of longish (>= 4 bytes) prefix literals, then
    it might be faster than before.

Bug fixes:

-   [BUG #&#8203;514](rust-lang/regex#514):
    Improve `Debug` impl for `Match` so that it doesn't show the entire haystack.
-   BUGS [#&#8203;516](rust-lang/regex#516),
    [#&#8203;731](rust-lang/regex#731):
    Fix a number of issues with printing `Hir` values as regex patterns.
-   [BUG #&#8203;610](rust-lang/regex#610):
    Add explicit example of `foo|bar` in the regex syntax docs.
-   [BUG #&#8203;625](rust-lang/regex#625):
    Clarify that `SetMatches::len` does not (regretably) refer to the number of
    matches in the set.
-   [BUG #&#8203;660](rust-lang/regex#660):
    Clarify "verbose mode" in regex syntax documentation.
-   BUG [#&#8203;738](rust-lang/regex#738),
    [#&#8203;950](rust-lang/regex#950):
    Fix `CaptureLocations::get` so that it never panics.
-   [BUG #&#8203;747](rust-lang/regex#747):
    Clarify documentation for `Regex::shortest_match`.
-   [BUG #&#8203;835](rust-lang/regex#835):
    Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`.
-   [BUG #&#8203;846](rust-lang/regex#846):
    Add more clarifying documentation to the `CompiledTooBig` error variant.
-   [BUG #&#8203;854](rust-lang/regex#854):
    Clarify that `regex::Regex` searches as if the haystack is a sequence of
    Unicode scalar values.
-   [BUG #&#8203;884](rust-lang/regex#884):
    Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute.
-   [BUG #&#8203;893](rust-lang/regex#893):
    Optimize case folding since it can get quite slow in some pathological cases.
-   [BUG #&#8203;895](rust-lang/regex#895):
    Reject `(?-u:\W)` in `regex::Regex` APIs.
-   [BUG #&#8203;942](rust-lang/regex#942):
    Add a missing `void` keyword to indicate "no parameters" in C API.
-   [BUG #&#8203;965](rust-lang/regex#965):
    Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`.
-   [BUG #&#8203;975](rust-lang/regex#975):
    Clarify documentation for `\pX` syntax.

</details>

---

### Configuration

📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update again.

---

 - [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check this box

---

This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNS42MS4wIiwidXBkYXRlZEluVmVyIjoiMzUuNjYuMyIsInRhcmdldEJyYW5jaCI6ImRldmVsb3AifQ==-->

Co-authored-by: cabr2-bot <[email protected]>
Co-authored-by: crapStone <[email protected]>
Reviewed-on: https://codeberg.org/Calciumdibromid/CaBr2/pulls/1874
Reviewed-by: crapStone <[email protected]>
Co-authored-by: Calciumdibromid Bot <[email protected]>
Co-committed-by: Calciumdibromid Bot <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
doc fix-incoming
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@mina86 @BurntSushi