SCSI Tape Encryption Manager - Manages hardware encryption on LTO tape drives (starting with generation 4). Program should work on any other SCSI security protocol (SSP) capable tape drives. Supports key change auditing and key descriptors (uKAD).
- SCSI hardware-based encryption management
- Supports Linux and FreeBSD
- Supports most SSP compliant devices, such as LTO-4 tape drives
- Key change audit logging
- AES Encryption
- Key Descriptor Management
git clone https://github.com/scsitape/stenc.git
cd stenc/
autoreconf --install
./autogen.sh && ./configure
make check # optionally run the catch testing framework
make
$ stenc -f /dev/nst0
Status for /dev/nst0 (TANDBERG LTO-6 HH 3579)
--------------------------------------------------
Reading: Decrypting (AES-256-GCM-128)
Writing: Encrypting (AES-256-GCM-128)
Protecting from raw read
Key instance counter: 1
Drive key desc. (U-KAD): mykey20170113
Supported algorithms:
1 AES-256-GCM-128
Key descriptors allowed, maximum 32 bytes
Raw decryption mode allowed, raw read enabled by default
AIX support was suspended on 2022-05-08 until we have contributors who can develop and test the code on AIX.
Program copyright 2012-2022 contributing authors.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
IBM Tape Library Guide for Open Systems ISBN-13: 9780738458342 http://www.redbooks.ibm.com/abstracts/sg245946.html?Open
SCSI-Programming-HOWTO https://tldp.org/HOWTO/archived/SCSI-Programming-HOWTO/SCSI-Programming-HOWTO-9.html