Update Caribou profiles

A3dp.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.5.0
+0.0.1 Initial version

A3dp.ini

@@ -0,0 +1,292 @@
+# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = A3dp
+config_version = 0.0.1
+config_update_url = 
+
+[printer_model:MyExample]
+name = An example
+variants = 0.5
+technology = FFF
+#bed_model = bed.stl
+#bed_texture = bed.svg
+default_materials = Generic PLA @A3dp; Generic PETG @A3dp
+# the thumbnail has to be named MyExample_thumbnail.png in the A3dp directory
+
+[printer_model:MyExample2]
+name = A second example
+variants = 0.5; 0.4
+technology = FFF
+default_materials = Generic PLA @A3dp; Generic PETG @A3dp
+
+[print:0.3mm @A3dp]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 100%
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+first_layer_size_compensation = 0
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.56
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.56
+fill_angle = 45
+fill_density = 20%
+fill_pattern = gyroid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.6
+first_layer_height = 50%
+first_layer_speed = 40%
+first_layer_infill_speed = 40%
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.56
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+inherits = 
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 0
+notes = 
+only_one_perimeter_top = 1
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
+overhangs_width_speed = 50%
+overhangs_width = 75%
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.56
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+raft_layers = 0
+seam_position = cost
+seam_angle_cost = 80%
+seam_travel_cost = 20%
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.56
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.44
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thin_perimeters = 1
+thin_walls = 1
+thin_walls_min_width = 50%
+thin_walls_overlap = 50%
+threads = 12
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.52
+top_solid_infill_speed = 40
+top_solid_layers = 3
+travel_speed = 175
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+extrusion_spacing =
+perimeter_extrusion_spacing =
+external_perimeter_extrusion_spacing =
+first_layer_extrusion_spacing =
+infill_extrusion_spacing =
+solid_infill_extrusion_spacing =
+top_infill_extrusion_spacing =
+
+[filament:*PLA*]
+filament_vendor = ColorFabb
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 1.25
+filament_deretract_speed = nil
+filament_diameter = 2.85
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 200
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 200
+
+[filament:Generic PLA @A3dp]
+inherits = *PLA*
+filament_colour = #F94D0C
+
+[filament:Generic PETG @A3dp]
+inherits = *PLA*
+temperature = 250
+bed_temperature = 70
+first_layer_temperature = 240
+first_layer_bed_temperature = 70
+max_fan_speed = 40
+min_fan_speed = 20
+filament_colour = #42BDD8
+
+[printer:*example base*]
+default_print_profile = 0.3mm @A3dp
+default_filament_profile = Generic PLA @A3dp
+bed_shape = 0x0,200x0,200x280,0x200
+deretract_speed = 20
+end_gcode = M400; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0; disable hotend\nM107; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+inherits = 
+layer_gcode = 
+machine_max_acceleration_e = 1000,5000
+machine_max_acceleration_extruding = 1000,1250
+machine_max_acceleration_retracting = 1000,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 100,200
+machine_max_feedrate_e = 40,120
+machine_max_feedrate_x = 800,200
+machine_max_feedrate_y = 800,200
+machine_max_feedrate_z = 3,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 12,10
+machine_max_jerk_y = 12,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 250
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+parking_pos_retraction = 92
+printer_notes = 
+printer_technology = FFF
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+
+[printer:Example printer]
+inherits = *example base*
+printer_model = MyExample
+printer_variant = 0.5
+
+[printer:Example2 0.5]
+inherits = *example base*
+printer_model = MyExample2
+printer_variant = 0.5
+[printer:Example2 0.4]
+inherits = *example base*
+printer_model = MyExample2
+nozzle_diameter = 0.4
+printer_variant = 0.4

Caribou.idx

@@ -1,4 +1,14 @@
-min_slic3r_version = 2.3.57
+min_slic3r_version = 2.5.59
+0.3.4 increased thumbnail sizes for Duet
+0.3.3 corrects thumbnails_tag_format
+0.3.2 writes thumbnail format into gcode for Duet
+0.3.1 sets skirt height to 1
+0.3.0 make extrusion widths dependent on nozzle diameter
+0.2.4 set first_layer_height to 50% of nozzle diameter
+0.2.3 updated svg files for MK3s
+0.2.2 corrects 0.35mm profiles
+0.2.1 sets min and max layer to %
+0.2.0 adds IDEX and CaribouM
 0.1.6 corrected retract_lift_below
 0.1.5 corrected max layer height, added inherits for bigger nozzles
 0.1.0 added esun ABS, changed fan settings for PETG and XPETG matt
@@ -14,5 +24,5 @@ min_slic3r_version = 2.3.57
 0.0.5 added default filaments
 0.0.4 added some Extrudr filaments
 0.0.3 updated Klipper start script
-0.0.2 updated urls
+0.0.2 updated urls 
 0.0.1 Initial Version