riscv: dts: allwinner: d1: Enable audio-out pads on MangoPi MQ-Pro #4
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smaeul
pushed a commit
that referenced
this pull request
Feb 5, 2023
Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] #4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] #5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] #6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] torvalds#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] torvalds#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] torvalds#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <[email protected]> Signed-off-by: Hiroshi Shimamoto <[email protected]> Tested-by: Hiroshi Shimamoto <[email protected]> Cc: Trond Myklebust <[email protected]> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <[email protected]>
smaeul
pushed a commit
that referenced
this pull request
Feb 5, 2023
…ata and not linked with libtraceevent
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
torvalds#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
torvalds#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
torvalds#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
torvalds#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes: 378ef0f ("perf build: Use libtraceevent from the system")
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
smaeul
pushed a commit
that referenced
this pull request
Feb 5, 2023
When unloading the SCMI core stack module, configured to use the virtio SCMI transport, LOCKDEP reports the splat down below about unsafe locks dependencies. In order to avoid this possible unsafe locking scenario call upfront virtio_break_device() before getting hold of vioch->lock. ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 6.1.0-00067-g6b934395ba07-dirty #4 Not tainted ----------------------------------------------------- rmmod/307 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffff000080c510e0 (&dev->vqs_list_lock){+.+.}-{3:3}, at: virtio_break_device+0x28/0x68 and this task is already holding: ffff00008288ada0 (&channels[i].lock){-.-.}-{3:3}, at: virtio_chan_free+0x60/0x168 [scmi_module] which would create a new lock dependency: (&channels[i].lock){-.-.}-{3:3} -> (&dev->vqs_list_lock){+.+.}-{3:3} but this new dependency connects a HARDIRQ-irq-safe lock: (&channels[i].lock){-.-.}-{3:3} ... which became HARDIRQ-irq-safe at: lock_acquire+0x128/0x398 _raw_spin_lock_irqsave+0x78/0x140 scmi_vio_complete_cb+0xb4/0x3b8 [scmi_module] vring_interrupt+0x84/0x120 vm_interrupt+0x94/0xe8 __handle_irq_event_percpu+0xb4/0x3d8 handle_irq_event_percpu+0x20/0x68 handle_irq_event+0x50/0xb0 handle_fasteoi_irq+0xac/0x138 generic_handle_domain_irq+0x34/0x50 gic_handle_irq+0xa0/0xd8 call_on_irq_stack+0x2c/0x54 do_interrupt_handler+0x8c/0x90 el1_interrupt+0x40/0x78 el1h_64_irq_handler+0x18/0x28 el1h_64_irq+0x64/0x68 _raw_write_unlock_irq+0x48/0x80 ep_start_scan+0xf0/0x128 do_epoll_wait+0x390/0x858 do_compat_epoll_pwait.part.34+0x1c/0xb8 __arm64_sys_epoll_pwait+0x80/0xd0 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.3+0x98/0x120 do_el0_svc+0x34/0xd0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 to a HARDIRQ-irq-unsafe lock: (&dev->vqs_list_lock){+.+.}-{3:3} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0x128/0x398 _raw_spin_lock+0x58/0x70 __vring_new_virtqueue+0x130/0x1c0 vring_create_virtqueue+0xc4/0x2b8 vm_find_vqs+0x20c/0x430 init_vq+0x308/0x390 virtblk_probe+0x114/0x9b0 virtio_dev_probe+0x1a4/0x248 really_probe+0xc8/0x3a8 __driver_probe_device+0x84/0x190 driver_probe_device+0x44/0x110 __driver_attach+0x104/0x1e8 bus_for_each_dev+0x7c/0xd0 driver_attach+0x2c/0x38 bus_add_driver+0x1e4/0x258 driver_register+0x6c/0x128 register_virtio_driver+0x2c/0x48 virtio_blk_init+0x70/0xac do_one_initcall+0x84/0x420 kernel_init_freeable+0x2d0/0x340 kernel_init+0x2c/0x138 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->vqs_list_lock); local_irq_disable(); lock(&channels[i].lock); lock(&dev->vqs_list_lock); <Interrupt> lock(&channels[i].lock); *** DEADLOCK *** ================ Fixes: 42e90eb ("firmware: arm_scmi: Add a virtio channel refcount") Signed-off-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>
smaeul
pushed a commit
that referenced
this pull request
Feb 5, 2023
…ed_text_end" symbol on s/390
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
smaeul
pushed a commit
that referenced
this pull request
Feb 5, 2023
During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] torvalds#7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Mango Pi MQ-Pro has audio pads on the PCB bottom and they works!
MQ-Pro schematics suggests the HPOUT L/R are used.