E3V2-2.0.x.17

18-03-2021 [V2.0.X.17] - Official Release

• Baud Rate has updated to 250000 to improve Octoprint performance (For Octoprint/Pronterface/Cura setting, please update them to 250000)
• Setting > Advances to switch Probe X Y & filament sensor on fly.
• Updated default PLA preheat to (195 nozzle & 50 bed)
• Host print message support
• Enable long filename supports & scrollable
• Emergency Parser
• With improved status bar by Jyers (tempearture, flow, fan, z-offset and xyz positions)
• Updated to the latest Marlin (18-03-2021)

Existing Features:

• Z-Offset Tool (Baby Z-Stepping)
• Aux Leveling
• Refuel Filament (Feed & Retract)
• Support for Filament Changes (M600)
• Support for S-CURVE Acceleration

For octoprint user please enable "G90/G91 overrides relative extruder mode"

Versioning Explained:
Default = 4.2.2 motherboard
427 = 4.2.7 motherboard
Slow = Slow Probe
Fast = Fast Probe
Zstop = Zstop bltouch (for people who are suffering from random probe fail)
Fil-Invert = In case the original firmware doesn't work, use the Fil-Invert edition
230230/235235 = bed size, bigger bed size require changes in cura. may hit your bed clip if not position properly.

E3V2-2.0.x.14

Updated 13-10-2020 [V2.0.X.14]
-Delete plr when cancelling resume print
-Improve Refuel feature (faster feed rate 150mm/s)
-Marlin bug fix (Stop print will now stop properly)
-Updated to the latest Marlin (12-10-2020)

E3V2-2.0.x.12

Updated 22-9-2020 [V2.0.X.12]
-Bug fixes to live offset adjustment

E3V2-2.0.x.11

Updated 21-9-2020 [V2.0.X.11]
-English on boot
-Updated to the latest Marlin (21-09-2020)

E3V2-2.0.x.16

Latest version is based on the date of the filename

Note: the default firmware is based on bltouch port. there is a Z switch version for user who had issue with the port. (random fail probe).

Updated 04-02-2021 [V2.0.X.16-4]
-Latest Marlin with Meatpack support

Updated 10-01-2021 [V2.0.X.16-3]
-Marlin bug fixes
-Updated to the latest Marlin (10-01-2021)

Updated 22-12-2020 [V2.0.X.16-2]
-Marlin bug fixes
-Updated to the latest Marlin (22-12-2020)

Updated 19-12-2020 [V2.0.X.16-1]
-Marlin bug fixes
-Updated to the latest Marlin (19-12-2020)

E3V2-2.0.x.13

Updated 02-10-2020 [V2.0.X.13]
-Resume Printing is now working properly
-Support MicroSD card extension cable (no longer need to reseat extension or restart printer)
-Default Refuel mm to 10mm
-Enable #define ENDSTOPPULLUPS (Credit to to Dimitris)
-Prevent changes of zoffset when just turning the knob during live
-Adding more precompiled firmwares for Filament Sensor & 4.2.7 Mobo
-Updated to the latest Marlin (02-10-2020)

Ignore the source zip below, please download it from the branch instead
https://github.com/smith3d/Marlin/tree/bugfix-2.0.x-Smith3D