[Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712"

.gitmodules

@@ -68,3 +68,6 @@
 [submodule "platform/p4/SAI-P4-BM"]
 	path = platform/p4/SAI-P4-BM
 	url = https://github.com/Mellanox/SAI-P4-BM.git
+[submodule "platform/nephos/sonic-platform-modules-ingrasys"]
+	path = platform/nephos/sonic-platform-modules-ingrasys
+	url = https://github.com/Ingrasys-sonic/sonic-platform-modules-ingrasys-nephos.git

README.md

@@ -53,6 +53,7 @@ The SONiC installer contains all docker images needed. SONiC uses one image for
 - PLATFORM=mellanox
 - PLATFORM=cavium
 - PLATFORM=centec
+- PLATFORM=nephos
 - PLATFORM=p4
 - PLATFORM=vs
 
@@ -96,9 +97,11 @@ This may take a while, but it is a one-time action, so please be patient.
   - docker-orchagent-brcm.gz: docker image for SWitch State Service (SWSS) on Broadcom platform (gzip tar archive)
   - docker-orchagent-cavm.gz: docker image for SWitch State Service (SWSS) on Cavium platform (gzip tar archive)
   - docker-orchagent-mlnx.gz: docker image for SWitch State Service (SWSS) on Mellanox platform (gzip tar archive)
+  - docker-orchagent-nephos.gz: docker image for SWitch State Service (SWSS) on Nephos platform (gzip tar archive)
   - docker-syncd-brcm.gz: docker image for the daemon to sync database and Broadcom switch ASIC (gzip tar archive)
   - docker-syncd-cavm.gz: docker image for the daemon to sync database and Cavium switch ASIC (gzip tar archive)
   - docker-syncd-mlnx.gz: docker image for the daemon to sync database and Mellanox switch ASIC (gzip tar archive)
+  - docker-syncd-nephos.gz: docker image for the daemon to sync database and Nephos switch ASIC (gzip tar archive)
   - docker-sonic-p4.gz: docker image for all-in-one for p4 software switch (gzip tar archive)
   - docker-sonic-vs.gz: docker image for all-in-one for software virtual switch (gzip tar archive)
 

build_debian.sh

@@ -144,6 +144,9 @@ sudo chroot $FILESYSTEM_ROOT update-initramfs -u
 ## Install latest intel igb driver
 sudo cp target/debs/igb.ko $FILESYSTEM_ROOT/lib/modules/3.16.0-4-amd64/kernel/drivers/net/ethernet/intel/igb/igb.ko
 
+## Install latest intel ixgbe driver
+sudo cp target/debs/ixgbe.ko $FILESYSTEM_ROOT/lib/modules/3.16.0-4-amd64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko
+
 ## Install docker
 echo '[INFO] Install docker'
 ## Install apparmor utils since they're missing and apparmor is enabled in the kernel

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.ini

@@ -0,0 +1,33 @@
+# name          lanes             alias             index
+Ethernet0       0,1,2,3           Ethernet1/1       0
+Ethernet4       4,5,6,7           Ethernet2/1       1
+Ethernet8       8,9,10,11         Ethernet3/1       2
+Ethernet12      12,13,14,15       Ethernet4/1       3
+Ethernet16      16,17,18,19       Ethernet5/1       4
+Ethernet20      20,21,22,23       Ethernet6/1       5
+Ethernet24      24,25,26,27       Ethernet7/1       6
+Ethernet28      28,29,30,31       Ethernet8/1       7
+Ethernet32      32,33,34,35       Ethernet9/1       8
+Ethernet36      36,37,38,39       Ethernet10/1      9
+Ethernet40      40,41,42,43       Ethernet11/1      10
+Ethernet44      44,45,46,47       Ethernet12/1      11
+Ethernet48      48,49,50,51       Ethernet13/1      12
+Ethernet52      52,53,54,55       Ethernet14/1      13
+Ethernet56      56,57,58,59       Ethernet15/1      14
+Ethernet60      60,61,62,63       Ethernet16/1      15
+Ethernet64      64,65,66,67       Ethernet17/1      16
+Ethernet68      68,69,70,71       Ethernet18/1      17
+Ethernet72      72,73,74,75       Ethernet19/1      18
+Ethernet76      76,77,78,79       Ethernet20/1      19
+Ethernet80      80,81,82,83       Ethernet21/1      20
+Ethernet84      84,85,86,87       Ethernet22/1      21
+Ethernet88      88,89,90,91       Ethernet23/1      22
+Ethernet92      92,93,94,95       Ethernet24/1      23
+Ethernet96      96,97,98,99       Ethernet25/1      24
+Ethernet100     100,101,102,103   Ethernet26/1      25
+Ethernet104     104,105,106,107   Ethernet27/1      26
+Ethernet108     108,109,110,111   Ethernet28/1      27
+Ethernet112     112,113,114,115   Ethernet29/1      28
+Ethernet116     116,117,118,119   Ethernet30/1      29
+Ethernet120     120,121,122,123   Ethernet31/1      30
+Ethernet124     124,125,126,127   Ethernet32/1      31

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/sai.profile

@@ -0,0 +1,2 @@
+SAI_INIT_CONFIG_FILE=/usr/share/sonic/platform/led_proc_init.nps
+SAI_DSH_CONFIG_FILE=/usr/share/sonic/hwsku/port_config.nps

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/fancontrol

@@ -0,0 +1,12 @@
+# Configuration file generated by pwmconfig, changes will be lost
+INTERVAL=10
+DEVPATH=hwmon5=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-8/8-002f
+DEVNAME=hwmon5=w83795adg
+FCTEMPS=hwmon5/device/pwm2=hwmon1/temp1_input hwmon5/device/pwm1=hwmon1/temp1_input
+FCFANS=hwmon5/device/pwm2=hwmon5/device/fan8_input hwmon5/device/pwm2=hwmon5/device/fan7_input hwmon5/device/pwm2=hwmon5/device/fan6_input hwmon5/device/pwm2=hwmon5/device/fan5_input hwmon5/device/pwm1=hwmon5/device/fan4_input hwmon5/device/pwm1=hwmon5/device/fan3_input hwmon5/device/pwm1=hwmon5/device/fan2_input hwmon5/device/pwm1=hwmon5/device/fan1_input
+# TODO: check the temp value with HW after board ready
+MINTEMP=hwmon5/device/pwm2=20 hwmon5/device/pwm1=20
+MAXTEMP=hwmon5/device/pwm2=60 hwmon5/device/pwm1=60
+MINSTART=hwmon5/device/pwm2=75 hwmon5/device/pwm1=75
+MINSTOP=hwmon5/device/pwm2=22 hwmon5/device/pwm1=22
+

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/installer.conf

@@ -0,0 +1,3 @@
+CONSOLE_PORT=0x3f8
+CONSOLE_DEV=0
+CONSOLE_SPEED=115200

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/led_proc_init.nps

@@ -0,0 +1,20 @@
+#This configuration file is for customer init value feature. Please refer to mtk_cfg.h/mtk_cfg.c for detail.
+#1.  The lines beginning with # are comment lines. The lines beginning with number are the setting lines.
+#2.  There are five parameters which can be set.
+#       1) the first is unit.
+#       2) the second is NPS_CFG_TYPE_XXX. Refer to NPS_CFG_TYPE_T.
+#       3) the 3-5 are {param0, param1, value} pairs. Refer to NPS_CFG_VALUE_T. Support HEX format.
+#       4) the (unit, NPS_CFG_TYPE_XXX, param0, param1) group is the key to get the correspingding value.
+#          There should be no same (unit, NPS_CFG_TYPE_XXX, param0, param1) group.
+#3.  User must follow correct format to apply the setting. Please refer to below commentted example(#0 NPS_CFG_TYPE_L2_ADDR_MODE 0 0 1);
+#4.  Usage under the linux shell:
+#       1) ./image-path/image-name -c cfg-path/NPS_Ari_EVB_24.cfg : mamually specify directory path if they are not in current work dirctory.
+#       2) ./image-name -c NPS_Ari_EVB_24.cfg : the image and the NPS_Ari_EVB_24.cfg are in the current work directory.
+
+#unit   NPS_CFG_TYPE_XXX                param0  param1  value
+#----   ----------------                ------  ------  -----
+0       NPS_CFG_TYPE_USE_UNIT_PORT       0      0       1
+0       NPS_CFG_TYPE_LED_CFG             0      0       1
+0       NPS_CFG_TYPE_CPI_PORT_MODE       129    0       0
+0       NPS_CFG_TYPE_CPI_PORT_MODE       130    0       0
+0       NPS_CFG_TYPE_USER_BUF_CTRL       0      0       1

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/minigraph.xml

@@ -0,0 +1,151 @@
+<DeviceMiniGraph xmlns="Microsoft.Search.Autopilot.Evolution" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
+  <CpgDec>
+    <IsisRouters xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution"/>
+    <PeeringSessions>
+      <BGPSession>
+        <StartRouter>OCPSCH0104001MS</StartRouter>
+        <StartPeer>10.10.1.26</StartPeer>
+        <EndRouter>OCPSCH01040GGLF</EndRouter>
+        <EndPeer>10.10.1.25</EndPeer>
+        <Multihop>1</Multihop>
+        <HoldTime>10</HoldTime>
+        <KeepAliveTime>3</KeepAliveTime>
+      </BGPSession>
+      <BGPSession>
+        <StartRouter>OCPSCH0104002MS</StartRouter>
+        <StartPeer>10.10.2.26</StartPeer>
+        <EndRouter>OCPSCH01040GGLF</EndRouter>
+        <EndPeer>10.10.2.25</EndPeer>
+        <Multihop>1</Multihop>
+        <HoldTime>10</HoldTime>
+        <KeepAliveTime>3</KeepAliveTime>
+      </BGPSession>
+    </PeeringSessions>
+    <Routers xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution">
+      <a:BGPRouterDeclaration>
+        <a:ASN>64536</a:ASN>
+        <a:Hostname>OCPSCH01040GGLF</a:Hostname>
+        <a:Peers>
+          <BGPPeer>
+            <Address>10.10.1.26</Address>
+            <RouteMapIn i:nil="true"/>
+            <RouteMapOut i:nil="true"/>
+          </BGPPeer>
+          <BGPPeer>
+            <Address>10.10.2.26</Address>
+            <RouteMapIn i:nil="true"/>
+            <RouteMapOut i:nil="true"/>
+          </BGPPeer>
+        </a:Peers>
+        <a:RouteMaps/>
+      </a:BGPRouterDeclaration>
+      <a:BGPRouterDeclaration>
+        <a:ASN>64542</a:ASN>
+        <a:Hostname>OCPSCH0104001MS</a:Hostname>
+        <a:RouteMaps/>
+      </a:BGPRouterDeclaration>
+      <a:BGPRouterDeclaration>
+        <a:ASN>64543</a:ASN>
+        <a:Hostname>OCPSCH0104002MS</a:Hostname>
+        <a:RouteMaps/>
+      </a:BGPRouterDeclaration>
+    </Routers>
+  </CpgDec>
+  <DpgDec>
+    <DeviceDataPlaneInfo>
+      <IPSecTunnels/>
+      <LoopbackIPInterfaces xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution">
+        <a:LoopbackIPInterface>
+          <Name>HostIP</Name>
+          <AttachTo>Loopback0</AttachTo>
+          <a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
+            <b:IPPrefix>100.0.0.9/32</b:IPPrefix>
+          </a:Prefix>
+          <a:PrefixStr>100.0.0.9/32</a:PrefixStr>
+        </a:LoopbackIPInterface>
+      </LoopbackIPInterfaces>
+      <ManagementIPInterfaces xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution">
+      </ManagementIPInterfaces>
+      <MplsInterfaces/>
+      <MplsTeInterfaces/>
+      <RsvpInterfaces/>
+      <Hostname>OCPSCH01040GGLF</Hostname>
+      <PortChannelInterfaces/>
+      <VlanInterfaces/>
+      <IPInterfaces>
+        <IPInterface>
+          <Name i:nil="true"/>
+          <AttachTo>Ethernet0</AttachTo>
+          <Prefix>10.10.1.25/30</Prefix>
+        </IPInterface>
+        <IPInterface>
+          <Name i:nil="true"/>
+          <AttachTo>Ethernet4</AttachTo>
+          <Prefix>10.10.2.25/30</Prefix>
+        </IPInterface>
+      </IPInterfaces>
+      <DataAcls/>
+      <AclInterfaces/>
+      <DownstreamSummaries/>
+      <DownstreamSummarySet xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution"/>
+    </DeviceDataPlaneInfo>
+  </DpgDec>
+  <PngDec>
+    <DeviceInterfaceLinks>
+      <DeviceLinkBase i:type="DeviceInterfaceLink">
+        <Bandwidth>40000</Bandwidth>
+        <ElementType>DeviceInterfaceLink</ElementType>
+        <EndDevice>OCPSCH0104001MS</EndDevice>
+        <EndPort>Ethernet24</EndPort>
+        <StartDevice>OCPSCH01040GGLF</StartDevice>
+        <StartPort>Ethernet0</StartPort>
+      </DeviceLinkBase>
+      <DeviceLinkBase i:type="DeviceInterfaceLink">
+        <Bandwidth>40000</Bandwidth>
+        <ElementType>DeviceInterfaceLink</ElementType>
+        <EndDevice>OCPSCH0104002MS</EndDevice>
+        <EndPort>Ethernet24</EndPort>
+        <StartDevice>OCPSCH01040GGLF</StartDevice>
+        <StartPort>Ethernet4</StartPort>
+      </DeviceLinkBase>
+    </DeviceInterfaceLinks>
+    <Devices>
+      <Device i:type="LeafRouter">
+        <Hostname>OCPSCH01040GGLF</Hostname>
+        <HwSku>INGRASYS-S9130-32X</HwSku>
+      </Device>
+    </Devices>
+   </PngDec>
+  <MetadataDeclaration>
+    <Devices xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution">
+      <a:DeviceMetadata>
+        <a:Name>OCPSCH01040GGLF</a:Name>
+        <a:Properties>
+          <a:DeviceProperty>
+            <a:Name>DhcpResources</a:Name>
+            <a:Reference i:nil="true"/>
+            <a:Value></a:Value>
+          </a:DeviceProperty>
+          <a:DeviceProperty>
+            <a:Name>NtpResources</a:Name>
+            <a:Reference i:nil="true"/>
+            <a:Value>0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org</a:Value>
+          </a:DeviceProperty>
+          <a:DeviceProperty>
+            <a:Name>SyslogResources</a:Name>
+            <a:Reference i:nil="true"/>
+            <a:Value></a:Value>
+          </a:DeviceProperty>
+          <a:DeviceProperty>
+            <a:Name>ErspanDestinationIpv4</a:Name>
+            <a:Reference i:nil="true"/>
+            <a:Value>2.2.2.2</a:Value>
+          </a:DeviceProperty>
+        </a:Properties>
+      </a:DeviceMetadata>
+    </Devices>
+    <Properties xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution"/>
+  </MetadataDeclaration>
+  <Hostname>OCPSCH01040GGLF</Hostname>
+  <HwSku>INGRASYS-S9130-32X</HwSku>
+</DeviceMiniGraph>

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/plugins/eeprom.py

@@ -0,0 +1,22 @@
+#!/usr/bin/env python
+
+#############################################################################
+# Ingrasys S9130-32X
+#
+# Platform and model specific eeprom subclass, inherits from the base class,
+# and provides the followings:
+# - the eeprom format definition
+# - specific encoder/decoder if there is special need
+#############################################################################
+
+try:
+    from sonic_eeprom import eeprom_tlvinfo
+except ImportError, e:
+    raise ImportError (str(e) + "- required module not found")
+
+
+class board(eeprom_tlvinfo.TlvInfoDecoder):
+
+    def __init__(self, name, path, cpld_root, ro):
+        self.eeprom_path = "/sys/class/i2c-adapter/i2c-0/0-0055/eeprom"
+        super(board, self).__init__(self.eeprom_path, 0, '', True)

device/ingrasys/x86_64-ingrasys_s9130_32x-r0/plugins/psuutil.py

@@ -0,0 +1,92 @@
+#
+# psuutil.py
+# Platform-specific PSU status interface for SONiC
+#
+
+
+import os.path
+
+try:
+    from sonic_psu.psu_base import PsuBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+
+class PsuUtil(PsuBase):
+    """Platform-specific PSUutil class"""
+
+    SYSFS_PSU_DIR = ["/sys/bus/i2c/devices/i2c-10/10-0050",
+                     "/sys/bus/i2c/devices/i2c-9/9-0050"]
+
+    def __init__(self):
+        PsuBase.__init__(self)
+
+
+    # Get sysfs attribute
+    def get_attr_value(self, attr_path):
+
+        retval = 'ERR'        
+        if (not os.path.isfile(attr_path)):
+            return retval
+
+        try:
+            with open(attr_path, 'r') as fd:
+                retval = fd.read()
+        except Exception as error:
+            logging.error("Unable to open ", attr_path, " file !")
+
+        retval = retval.rstrip('\r\n')
+        return retval
+
+    def get_num_psus(self):
+        """
+        Retrieves the number of PSUs available on the device
+        :return: An integer, the number of PSUs available on the device
+         """
+        MAX_PSUS = 2
+        return MAX_PSUS
+
+    def get_psu_status(self, index):
+        """
+        Retrieves the oprational status of power supply unit (PSU) defined
+                by index <index>
+        :param index: An integer, index of the PSU of which to query status
+        :return: Boolean, True if PSU is operating properly, False if PSU is\
+        faulty
+        """
+        status = 0
+        attr_file = 'psu_pg'        
+        attr_path = self.SYSFS_PSU_DIR[index-1] +'/' + attr_file
+
+        attr_value = self.get_attr_value(attr_path)
+
+        if (attr_value != 'ERR'):
+            attr_value = int(attr_value, 16)
+            # Check for PSU status
+            if (attr_value == 1):
+                    status = 1
+
+        return status
+
+    def get_psu_presence(self, index):
+        """
+        Retrieves the presence status of power supply unit (PSU) defined
+                by index <index>
+        :param index: An integer, index of the PSU of which to query status
+        :return: Boolean, True if PSU is plugged, False if not
+        """
+        status = 0
+        psu_absent = 0
+        attr_file ='psu_abs'
+        attr_path = self.SYSFS_PSU_DIR[index-1] +'/' + attr_file
+
+        attr_value = self.get_attr_value(attr_path)
+
+        if (attr_value != 'ERR'):
+            attr_value = int(attr_value, 16)
+            # Check for PSU presence
+            if (attr_value == 0):
+                    status = 1
+
+        return status
+