test: run v8 tests from node tree

Ported by exinfinitum from a PR by jasnell:
see nodejs/node-v0.x-archive#14185

Allows the running of v8 tests on node's packaged v8 source code.

Note that the limited win32 support added by jasnell has NOT been ported,
and so these tests are currently UNIX ONLY.

Note that gclient depot tools
(see https://commondatastorage.googleapis.com/
chrome-infra-docs/flat/depot_tools/docs/html/
depot_tools_tutorial.html#_setting_up) and subversion are required
to run tests.

To perform tests, run the following commands:

make v8 DESTCPU=(ARCH)
make test-v8 DESTCPU=(ARCH)

where (ARCH) is your CPU architecture, e.g. x64, ia32.
DESTCPU MUST be specified for this to work properly.

Can also do tests on debug build by using "make test-v8 DESTCPU=(ARCH)
BUILDTYPE=Debug", or perform intl or benchmark tests via make
test-v8-intl or test-v8-benchmarks respectively.

Note that by default, quickcheck and TAP output are disabled, and i18n
is enabled. To activate these options, use options"QUICKCHECK=True" and
"ENABLE_V8_TAP=True" respectively.

Use "DISABLE_V8_I18N" to disable i18n.

Use V8_BUILD_OPTIONS to allow custom user-defined flags to be
appended onto "make v8".

Any tests performed after changes to the packaged v8 file will require
recompiling of v8, which can be done using "make v8 DESTCPU=(ARCH)".

Finally, two additional files necessary for one of the v8 tests have
been added to the v8 folder.

PR-URL: nodejs#4704
Reviewed-By: James M Snell <[email protected]>
Reviewed-By: Michael Dawson <[email protected]>
Reviewed-By: Ben Noordhuis <[email protected]>
Reviewed-By: targos - Michaël Zasso <[email protected]>

Makefile

@@ -11,6 +11,23 @@ STAGINGSERVER ?= node-www
 
 OSTYPE := $(shell uname -s | tr '[A-Z]' '[a-z]')
 
+ifdef QUICKCHECK
+  QUICKCHECK_ARG := --quickcheck
+endif
+
+ifdef ENABLE_V8_TAP
+  TAP_V8 := --junitout v8-tap.xml
+  TAP_V8_INTL := --junitout v8-intl-tap.xml
+  TAP_V8_BENCHMARKS := --junitout v8-benchmarks-tap.xml
+endif
+
+ifdef DISABLE_V8_I18N
+  V8_TEST_NO_I18N := --noi18n
+  V8_BUILD_OPTIONS += i18nsupport=off
+endif
+
+BUILDTYPE_LOWER := $(shell echo $(BUILDTYPE) | tr '[A-Z]' '[a-z]')
+
 # Determine EXEEXT
 EXEEXT := $(shell $(PYTHON) -c \
 		"import sys; print('.exe' if sys.platform == 'win32' else '')")
@@ -81,12 +98,18 @@ distclean:
 	-rm -rf deps/icu
 	-rm -rf deps/icu4c*.tgz deps/icu4c*.zip deps/icu-tmp
 	-rm -f $(BINARYTAR).* $(TARBALL).*
+	-rm -rf deps/v8/testing/gmock
+	-rm -rf deps/v8/testing/gtest
 
 check: test
 
 cctest: all
 	@out/$(BUILDTYPE)/$@
 
+v8:
+	tools/make-v8.sh v8
+	$(MAKE) -C deps/v8 $(V8_ARCH) $(V8_BUILD_OPTIONS)
+
 test: | cctest  # Depends on 'all'.
 	$(PYTHON) tools/test.py --mode=release message parallel sequential -J
 	$(MAKE) jslint
@@ -184,6 +207,30 @@ test-timers:
 test-timers-clean:
 	$(MAKE) --directory=tools clean
 
+test-v8:
+	# note: performs full test unless QUICKCHECK is specified
+	deps/v8/tools/run-tests.py --arch=$(V8_ARCH) \
+        --mode=$(BUILDTYPE_LOWER) $(V8_TEST_NO_I18N) $(QUICKCHECK_ARG) \
+        --no-presubmit \
+        --shell-dir=$(PWD)/deps/v8/out/$(V8_ARCH).$(BUILDTYPE_LOWER) \
+	 $(TAP_V8)
+
+test-v8-intl:
+	# note: performs full test unless QUICKCHECK is specified
+	deps/v8/tools/run-tests.py --arch=$(V8_ARCH) \
+        --mode=$(BUILDTYPE_LOWER) --no-presubmit $(QUICKCHECK_ARG) \
+        --shell-dir=deps/v8/out/$(V8_ARCH).$(BUILDTYPE_LOWER) intl \
+        $(TAP_V8_INTL)
+
+test-v8-benchmarks:
+	deps/v8/tools/run-tests.py --arch=$(V8_ARCH) --mode=$(BUILDTYPE_LOWER) \
+        --download-data $(QUICKCHECK_ARG) --no-presubmit \
+        --shell-dir=deps/v8/out/$(V8_ARCH).$(BUILDTYPE_LOWER) benchmarks \
+	 $(TAP_V8_BENCHMARKS)
+
+test-v8-all: test-v8 test-v8-intl test-v8-benchmarks
+	# runs all v8 tests
+
 apidoc_sources = $(wildcard doc/api/*.markdown)
 apidocs = $(addprefix out/,$(apidoc_sources:.markdown=.html)) \
 		$(addprefix out/,$(apidoc_sources:.markdown=.json))
@@ -288,6 +335,15 @@ endif
 endif
 endif
 
+# node and v8 use different arch names (e.g. node 'x86' vs v8 'ia32').
+# pass the proper v8 arch name to $V8_ARCH based on user-specified $DESTCPU.
+ifeq ($(DESTCPU),x86)
+V8_ARCH=ia32
+else
+V8_ARCH ?= $(DESTCPU)
+
+endif
+
 # enforce "x86" over "ia32" as the generally accepted way of referring to 32-bit intel
 ifeq ($(ARCH),ia32)
 override ARCH=x86
@@ -556,4 +612,5 @@ lint: jslint cpplint
 	dynamiclib test test-all test-addons build-addons website-upload pkg \
 	blog blogclean tar binary release-only bench-http-simple bench-idle \
 	bench-all bench bench-misc bench-array bench-buffer bench-net \
-	bench-http bench-fs bench-tls cctest run-ci
+	bench-http bench-fs bench-tls cctest run-ci test-v8 test-v8-intl \
+	test-v8-benchmarks test-v8-all v8